Architecture Commons^™

Development Of Multivariate-Coupled Grouting Diffusion Model For Rcc, Xiao Sun, Yao Wang, Hengrui Liu, Zhuanjia Yang, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Grouting Quality of Grout-Enriched Roller Compacted Concrete (RCC) is Difficult to Be Quantified Due to the Fact that the Crucial Effects, Such as Infiltration and the Compaction of the Skeleton of the RCC, Are Not Taken into Consideration. Combined with Model Testing, This Study Proposes an Improved Grouting Prediction Model Which Considers the Coupling Effect of Pore Fractal Properties, Time Variation of Grout Rheological Properties and Infiltration. Moreover, the Influence of Construction Parameters Such as Grouting Parameters, Construction Period Selection, Grouting Pipe Arrangement on the Grouting Effect Was Clarified. the Tests Indicated that the Maximum Diffusion Range of Slurry …

Building Materials Cut From The Earth: A Look At Sod Construction Around The World And In New Mexico, Giulia Caporuscio

Architecture and Planning ETDs

Terrón, or sod, is an earthen building technology that is being lost. The blocks are cut directly from the ground, generally along banks of bodies of fresh water, marshlands, or grassland valleys. The resulting blocks are clay rich with plant root systems that provide strength to the construction material. This building material is found in archeological and modern structures around the world. Today the material and knowledge behind this earthen technology is being lost.

This paper starts by summarizing other studies of sod construction in Indigenous cultures of the Americas, homesteaders of the Plains of the United States and Canada …

3d Printing Technology: Challenges, And Potentials In Achieving Sustainable Buildings, Sahar Mohamed Abd El Rahman, Sobhy Ibrahim Esmail

Journal of Engineering Research

The utilization of 3D printing technology in building construction has emerged as a promising approach with the potential to revolutionize the industry and significantly impact sustainability. This paper examines the role of 3D printing in building construction and explores its implications for sustainability. Through the ability to fabricate complex designs with precision and efficiency, 3D printing offers advantages such as reduced material waste, lower energy consumption, and decreased carbon emissions. Additionally, the use of locally sourced, recyclable materials combined with the customization capabilities of 3D printing enhances resource efficiency and minimizes environmental impact. Furthermore, the construction process is streamlined, leading …

Securing Body Area Networks With Fingerprint Cryptography And Authentication In Manet, Alaa M. Elbanaa, Roayat Ismail Abdelfatah, Mohamed E. Nasr

Journal of Engineering Research

Standard MANETs face issues like incorrect transmission and vulnerability to unauthorized node access, posing significant security concerns, especially regarding authentication procedures. To address these challenges, researchers are exploring innovative approaches to enhance authentication mechanisms within MANETs. In this paper, we present a novel solution integrating a Body Area Network (BAN) scheme to capture biomedical data from sensors such as ECG and EEG, facilitating data transmission across MANETs. Furthermore, we employ a hybrid Elgamal algorithm for encrypting biomedical data, bolstered by fingerprint biometrics to fortify the cryptographic process, enhancing network security. Additionally, we conduct comparative analyses, exploring different key sizes and …

A Technical Survey On The Impact Of Exhaust Gas Recirculation And Multifuel Blends On Diesel Engine Performance And Emission Characteristics, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi Prof. Dr. Eng., E. A. El Shenawy Prof. Dr., Mustafa Mohamed Ouda Eng.

Journal of Engineering Research

The increasing demand for fossil fuels poses significant challenges as their reserves gradually deplete over time. Biodiesel is considered one of the most effective alternative fuels to mitigate these issues. Current research focuses on comparing engine performance parameters when blending biodiesel with fossil fuels in Compression Ignition (C.I.) engines. The study demonstrates a comparison of the exhaust emissions produced by biodiesel fuel. In comparison to diesel, biodiesel generally exhibits lower heating value, higher density, increased fuel consumption, and elevated nitrogen oxide levels. To address these challenges, various additives are mixed and blended with biodiesel to meet international fuel standards. These …

(أليات تفعيل المدن الخضراء فى مصر(دراسة حالة المدن الجديدة المصرية, Abdelkhalek Ebrahim Elkady

Journal of Engineering Research

تلعب المدن الجديدة دورًا هاماً في التنمية الاقتصادية والاجتماعية والعمرانية، الا انها تواجه أيضًا مجموعة من التحديات البيئية والاجتماعية والاقتصادية. ويسعى نهج المدن الخضراء إلى تحقيق اهداف التنمية المستدامة من خلال تقليل التأثير البيئي للمدن، وتحسين

جودة حياة السكان، وتعزيز المرونة في مواجهة التحديات المستقبلية. لذا أطلقت الأمم المتحدة برنامج "مدن خضراء" لدعم المدن في جهودها لتصبح أكثر استدامة وخضراء. لذا جاءت الأهمية البحثية الى وضع أليات تفعيل المدن الخضراء في مصر بالتطبيق على المدن الجديدة المصرية، ويتم تناول ذلك من خلال ثلاث محاور رئيسية: المحور الأول دراسة الإطار النظري واليات تفعيل المدن الخضراء، والمحور الثاني أهم التجارب العالمية للمدن …

Heat And Mass Transfer Characteristics During Vacuum Drying Of Wood, Mohamed Salah Elmetwaly, Lotfy Hassan Rabie Saker, Mohamed Sameh Salem

Journal of Engineering Research

The properties affecting the characteristics of heat and mass transfer during vacuum drying of wood are studied in this paper. The experimental work is carried out in 0.0365 m³ test rig vacuum dryer. The drying chamber dimensions are 0.5 m long and 0.305 m diameter carbon steel cylinder. This drying chamber is internally coated with epoxy paint, also this chamber is detachable closing caps at both ends meaning welded at one end and bolted at the other end to facilitate loading and unloading of the specimen. Two stainless steel heat exchanger plates with dimensions 0.3 m length, 0.15 m …

Prediction Of Noise From A Construction Site, Amira Mostafa Ibrahim Miss, Nashwa Mohamed Yossef Prof, Adel Ibrahim Eldosouky Emeritus Professor

Journal of Engineering Research

Construction activities significantly contribute to environmental noise pollution, affecting workers' health and the surrounding community, posing significant challenges to human well-being and productivity. This paper presents a prediction method and a modelling technique used to assess construction site noise. Various factors influencing noise generation and propagation, such as equipment types, operational conditions, site characteristics, and environmental factors, are discussed. This paper explores the application of Monte Carlo technique as an effective method for predicting construction site noise and planning noise mitigation strategies.

الإطار المنهجي لتطبيق فكر الأقاليم الذكية كمدخل لتحقيق مبادئ التنمية العمرانية المستدامة في مصر, Ahmed Mohamed El Sayed Abdallah Marzouk Ahmed Marzouk

Journal of Engineering Research

The concept of smart city/region has become increasingly common due to the rapid acceleration of digital transformation in the use of advanced technologies across all sectors. This has had a significant impact on the urban environment of both urban and rural agglomerations. The concept of the smart city has extended to include larger spatial regions as a result of the sectorial relationships and interactions that arise between these agglomerations, forming what is known as Smart Regions.

The importance of studying and analyzing smart regions has increased due to the great opportunity they represent in achieving high rates of development in …

Towards More Inclusive Cities By Promoting Diversity And Inclusion, Asmaa Mostafa Elshamy

Journal of Engineering Research

The primary goal of promoting diversity and inclusion in cities is to ensure that every individual regardless of race, gender, sexual orientation, socioeconomic status or ability feels valued, respected and included. It goes beyond mere tolerance and seeks to actively embrace and celebrate differences. By fostering inclusive environments, cities can harness the collective power and potential of their diverse populations, leading to enhanced social well-being, economic growth, and innovation. The need to harness the potential of diversity and inclusion to achieve full social, economic, and cultural benefits has become increasingly clear in recent years. This goes beyond just inclusion and …

آليات ومتطلبات تطبيق فكر الزراعة المستدامة المبتكرة، في إطار تحقيق أهداف التنمية المستدامة بالتطبيق على نطاق الدلتا المصرية, Ahmed Mohamed El Sayed Abdallah Marzouk Ahmed Marzouk

Journal of Engineering Research

The agricultural sector faces several challenges that are working to exploit it to solve the issue of the rise in world population, which requires an increase in food production, which leads to increased pressure on constantly depleting resources, as agriculture is a source of employment and foreign exchange, a supplier of raw materials for industry, and has important potential for economic development. On the other hand, the sector’s capabilities are weak compared to other economic sectors, as the sector has not succeeded in ensuring income for farmers, achieving food security, or supporting integrated sectors. The reasons behind this include using …

Numerical Investigation Of Liquefaction Mitigation In-Sandy Soils Under Earthquake Loading Using Vertical Gravel Drains., Marawan M. Shahien M. Shahein, Ahmed Nasr, Baher Mohamed Abd El Fattah

Journal of Engineering Research

Liquefaction is one of the most dramatic defects of granular soil. This phenomenon is mostly observed when loose sand is subjected to a dynamic load or earthquake. In this study, the liquefaction that affected the loose soil evaluated, and some recommendations are introduced. (2-D) Numerical analysis using Plaxis (8.2) was conducted to simulate the behavior of the loose soil under dynamic loads. The studied model was carried out on multi-layers soil supported by stone columns subjected to dynamic loads. It was found that stone columns enhanced the soil behavior and reduced the damage that occurred. Liquefaction of the loose soil …

Chemical Kinetic Investigation: Exploring The Impact Of Various Concentrations Of Hho Gas With A 40% Biodiesel/Diesel Blend On Hcci Combustion, Mai H. Aboubakr, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi, Ayman Refat Abd Elbar

Journal of Engineering Research

This study uses the Chemkin software program to evaluate the effect of different quantities of oxyhydrogen gas [HHO] added to 40% biodiesel and diesel mix [B40], including B40, B40+5HHO, B40+10HHO, and B40+15HHO, on the HCCI combustion process's efficiency. The information collected includes cylinder pressure, cylinder temperature, accumulated gas phase heat release, heat loss rate, UHC, and mole fractions of O2, CO, CO2, diesel [NC7H16], biodiesel [C5H10O2], and oxyhydrogen [H2O]. The finding is that, when compared to a blend of biodiesel and diesel, using oxyhydrogen in the biodiesel/diesel mix boosts the properties of the HCCI engine.

Exploring The Influence Of Various Factors, Including Initial Temperatures, Equivalence Ratios, And Different Biodiesel/Diesel Blend Ratios, On Homogeneous Charge Compression Ignition (Hcci) Combustion, Mai H. Aboubakr, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi, Ayman Refat Abd Elbar

Journal of Engineering Research

This paper discusses the impact of three study cases that change with different values: the first case is four initial temperature values [313, 323, 333, and 343 K], the second case is three equivalence ratios [0.2, 0.3, and 0.4], and the third case uses various concentrations of biodiesel and diesel mixes [D100, B20, B40, B60, B80, and B100]. The purpose is to use the Chemkin software program to determine the effectiveness of each case in the HCCI combustion process. The results included cylinder pressure, cylinder temperature, accumulated gas phase heat release, heat loss rate, UHC, and mole fractions of O …

Survey And Analysis Of Safety Components And Costs In Construction Projects In Egypt, Emad E. Etman Prof., Haytham Sanad Prof., Asmaa Ibrahim Khater

Journal of Engineering Research

The difficulty of determining the factors that achieve safety on Egyptian construction sites as a result of multiple and different criteria and different relative weights of the criteria represents a challenge to achieve safety and a secure environment on construction sites. This issue has been of interest for many decades and continues to be a topic of discussion today because of construction project management is rapidly modernizing. The paper aims to identify the safety standards most commonly used on construction sites, and determine their relative weights as seen by the target audience and also estimate the cost of safety measures …

Agility Opportunities In Construction Project Management “Exploring Opportunities In Construction Projects In Integration With Waterfall Methodology.”, Nevine G. Gado Dr., Noha A, Elsayed Dr

Journal of Engineering Research

The objective of project management for construction projects is to deliver projects that meet customer requirements, business values, and goals in the most efficient manner. Project management is considered one of the vastly debated fields currently while the commonly adopted approach is still the waterfall model. However, in today's construction market, the number of different stakeholders,’ and the way projects awarded are changing. This has created a gap between management's belief of how today's construction projects should be conducted and how they are executed. Despite the growing importance of traditional construction project management as the preferred project delivery method, there …

Spatial Environmental Suitability For The Localization Of Sanitary Waste Landfills In Egypt Using Environmental Information Systems: Applying To Safaga Qism, Wessam Mostafa Emam, Dalia Mahmoud Hassan

Journal of Engineering Research

This research focuses on the application of an environmental information system to help achieve balance and interrelation between the various environmental standards affecting the selection of the site to the sanitary landfill in the touristic Safaga qism of the Red Sea. According to the sustainable development strategy of Egypt’s Vision 2030, the issue of solid waste is one of the most important environmental challenge that faced sustainable development in Egypt. In light of the increasing number of unauthorized dumps of waste that pollute the environment, the Ministry of Environment adopted a national project to establish a network of sanitary landfills, …

Enhancing Decision In Information System Through Weighted Preliminary Pretopology Analysis, Mustafa Elsayed, Rifet Agassi

Journal of Engineering Research

It is clear from adequate study of the past decades that there has been rapid growth in the information system, which relies mainly on programming systems. This has led to the necessity of dealing with high efficiency with the information system necessary for decision support. Information systems are a mixture of software and hardware to store and process all the data required and are presented in a useful form to extract information by applying topological concepts. In this paper a pretopological space from an information system is to be constructed. The computation of decision accuracy stands as a pivotal stage …

تحسين كفاءه التوازن الحرارى لمستخدمى الفراغات السكنيه, Alamera Kamal Elden Elfeky, Elamira Elfeky, Walaa Ahmed Nour, Lobna Abdallah Agha

Journal of Engineering Research

human belonging to nature Considered innate, and known as Biophilie, it has direct and strong relation with human heath and his welfare which affected by quality of internal environment where we Live and work as we spend most of our time in this environment. Biophelic design Aim to improve heath and welfare of human. natural. and reconnect him with his natural environment beside achieving the aesthetic aspect of his place.

in our present time, gap appeared in relation between human and environment as a result of modern design solution, as it has negative effect on human heath and safety, to …

Alhambra Alcazaba In Granada (Historical And Architectural Study), Ibrahim Abu Irmies

Journal of the Arab American University مجلة الجامعة العربية الامريكية للبحوث

The research focused on Alcazaba, fortress, of the Alhambra, located in the city of Granada in Al-Andalus, the reasons for its name, its geographical location, the reasons for its construction and how it is different from the old Alcazaba in Granada. It also discussed the historical stages of its construction since the era of the Umayyad State, the Zirid Dynasty as well as the era of the al-Muwahhidin and finally during the era of the state of Nasrid. The study was also supported by some evidence from the original historical sources, and important signs from the history of the internal …

The Architectural Characteristics Of The Palaces Of The Sultanate Of Al -Qaiti In Hadramout, Sabri Al-Tarimi, Fahed Jawher, Abdulaziz Al-Naggar

Journal of the Arab American University مجلة الجامعة العربية الامريكية للبحوث

The architectural characteristics of the Al -Qaiti palaces in Hadramout are one of the important topics that must be addressed to promote the architectural values and principles in those buildings and include them to the modern architectural style that expresses the architectural identity of the region. This study was divided into an introduction, analytical study, results and recommendations. The introduction included the research problem, the importance, objectives and methodology of research and the theoretical framework that included a historical overview of Hadramout and the history of the Sultanate of Al -Qaiti. In addition, a detailed and analytical explanation of the …

Towards Environmentally Sustainable Preservation Of Heritage Buildings, Rozal Rozal Yousef Hanna1, Ayman Gamal El-Din Abd El- Tawab2, Walaa Abou El- Haggag Mehanna3

Journal of Engineering Research

The construction industry, characterized by its intricate processes and extensive stakeholder networks, stands at the cusp of a digital revolution. The adoption of blockchain-smart contract (BCSC) technology is at the heart of this transformation. This research delves deep into the BCSC within the construction arena to provide comprehensive insight into its probable applications, inherent challenges, and potential future trajectories. Leveraging the PRISMA analysis technique, a curated collection of relevant academic research articles was assembled, shedding light on the existing body of knowledge regarding the application of BCSC technology in construction. The authors developed an innovative user interface tool customized to …

Review: Protection Of Wooden Structures With Nano-Titanium Dioxide Coating, Zienab Zienab A. Ahmed1*, And M. M. Mosallem2

Journal of Engineering Research

Wood is widely used for various purposes with good performance. Wood works as the main material for furniture, monuments, decorations and constructions. which has the close relationship with human. Durability of wood is important in ensuring an appropriate life for the structure being designed. Wooden construction deteriorates easily due to UV radiation and weather conditions. Many of wood types need a preservative treatment. Several compounds are available for chemical protection, but not all are completely safe for human health. New technologies with low environmental impact and economically feasible are developed, which improves the life cycle of wood. Titanium dioxide is …

Urbanism Strategies For Linking Existing And New Cities, Naglaa J. Q. Mo’Men Abdel-Qader Ebrahim1, Mohsen Bayad2

Journal of Engineering Research

New cities, designed for urban growth outside existing metropolitan regions, face challenges in street infrastructure due to rapid expansion. Efficient control of mobility is crucial as cities grow. Sustainable transportation involves factors like infrastructure, public transit, delivery networks, affordability, efficiency, air quality, health, and reduced emissions. Commuting between established and new urban areas is common, leading to issues like urban sprawl, longer travel times, and congestion in developing countries. The challenge is to improve accessibility while addressing air quality, traffic, congestion, noise, built environment, emissions, and sprawl. This study aims to explore factors influencing mobility choices in Egypt, focusing on …

Form Pressure Exerted By Concrete For A Large-Scale Structure: Its Quantification And Physicochemical Interpretation, Tae Yong Shin, Seongho Han, Jin Hyun Lee, Jae Hong Kim

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Securing safety in formwork is one of the most important tasks to be carried out in the initial stage of construction. The form pressure exerted by fresh concrete needs to be identified, and it should be retained by a formwork system. A design pressure is given in literature and standards, but for large structures its precise prediction is required through a detailed analysis or a mock-up test. This study reports the lateral form pressure distribution generated by fresh concrete through a series of mock-up tests. The tests are designed considering the placement for nuclear containment structures; 3.4 m tall and …

Synergetic Effect Of Viscosity Modifying Admixtures And Polycarboxylate Ether Superplasticizer On Key Characteristics Of Thixotropic Uhpc For Bonded Bridge Deck Overlay Rehabilitation, Le Teng, Ming Jin, Jiadi Du, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Thin bonded ultra-high-performance concrete (UHPC) overlay is an advanced technology for bridge deck rehabilitation. UHPC should be tailored to secure adequate flowability and high thixotropy to facilitate mixing and placement with a low risk of sagging of the material on sloped bridge deck surfaces. The synergetic effect between nano clay (NC) and polycarboxylate ether (PCE) superplasticizer or cellulose-based viscosity modifying admixture (VMA) and PCE on the rheological properties (yield stress, plastic viscosity, and thixotropy), cement hydration, autogenous shrinkage, compressive strength, and porosity was systematically investigated. The bond strength between conventional concrete (CC) representing existing bridge deck concrete and thixotropic UHPC …

New Method To Calculate Friction Velocity In Smooth Channel Flows Using Direct Numerical Simulation Data, Harshit Mishra, S. Karan Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this paper, we leverage the direct numerical simulation (DNS) data for closed-channel flow for a range of friction Reynolds number (Reτ∼180-5,000) to develop a new one-point friction velocity method (OPFVM) to calculate friction velocity U∗ in terms of free-surface velocity Um, flow depth h, and kinematic viscosity ν. In contrast to prevalent methods that require several cumbersome near boundary measurements to obtain friction velocity, the OPFVM relies on a single easy-to-measure free-surface velocity measurement. The formulation is used to obtain friction velocity for a closed-channel flow (CCF) DNS regime with Reτ=10,049 and on four open-channel flow (OCF) DNS regimes …

In Situ Synthesis, Characterization And Photocatalytic Efficacy Of Silver-Enhanced Mxene And Graphene Nanocomposites, Kishore Chand, M. Mustafa Azeem, Muhammad Nazim Lakhan, Mukhtiar Ahmed, Muhammad Jehanzaib Aslam, Ahmer Hussain Shah

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The emergence of 2D materials has significantly expanded the wide range of nanomaterials with diverse applications. Notably, their high conductivity, catalytic efficiency, and hydrophobicity have fueled heightened research interests for water treatment applications. This research aimed to investigate the synthesis and characterization of MXene and reduced graphene oxide (rGO) nanocomposites with silver nanoparticles (Ag) for enhanced catalytic activity in the decomposition of Direct Blue-24 dye. In this study, we employed well-established methods, previously documented in the literature, to prepare two distinct nanocomposites. Novel nanocomposites, namely reduced graphene oxide–silver nanoparticles (rGO–Ag) and MXene–silver nanoparticles (MXene–Ag), were synthesized using the hydrothermal and …

In Situ Synthesis, Characterization And Photocatalytic Efficacy Of Silver-Enhanced Mxene And Graphene Nanocomposites, Kishore Chand, M. Mustafa Azeem, Muhammad Nazim Lakhan, Mukhtiar Ahmed, Muhammad Jehanzaib Aslam, Ahmer Hussain Shah

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The emergence of 2D materials has significantly expanded the wide range of nanomaterials with diverse applications. Notably, their high conductivity, catalytic efficiency, and hydrophobicity have fueled heightened research interests for water treatment applications. This research aimed to investigate the synthesis and characterization of MXene and reduced graphene oxide (rGO) nanocomposites with silver nanoparticles (Ag) for enhanced catalytic activity in the decomposition of Direct Blue-24 dye. In this study, we employed well-established methods, previously documented in the literature, to prepare two distinct nanocomposites. Novel nanocomposites, namely reduced graphene oxide–silver nanoparticles (rGO–Ag) and MXene–silver nanoparticles (MXene–Ag), were synthesized using the hydrothermal and …

Freezing-Thawing Hysteretic Behavior Of Soils, Jidong Teng, Antai Dong, Sheng Zhang, Xiong Zhang, Daichao Sheng

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The soil freezing characteristic curve (SFCC) plays a crucial role in investigating the soil freezing-thawing process. Due to the challenges associated with measuring the SFCC, there is a shortage of high-quality or rigorous test results with sufficient metadata to be effectively used for applications. Current researchers typically conduct freezing tests to measure the SFCC and assume a singular SFCC when studying the freezing-thawing process of soils, although limited studies indicated that there is a hysteresis during the freezing and thawing process. In this paper, a series of freezing-thawing tests were performed to assess the SFCC, utilizing a precise nuclear magnetic …