Mechanical Engineering Commons^™

Study Of The Effect Of Biodiesel Fuel On Passive Oxidation In A Catalyzed Particulate Filter, Kenneth L. Shiel

Dissertations, Master's Theses and Master's Reports - Open

A 2007 Cummins ISL 8.9L direct-injection common rail diesel engine rated at 272 kW (365 hp) and 317 kW (425 hp) was used to load the filter to 2.2 g/L and passively oxidize particulate matter (PM) within an aftertreatment system consisting of a diesel oxidation catalyst (DOC) and catalyzed particulate filter (CPF). The tests conducted with the engine rated at 365 hp used a 2007 DOC and CPF. The tests conducted with the engine rated at 425 hp used a 2010 DOC and 2007 CPF. Understanding the passive NO₂ oxidation kinetics of PM within the CPF allows for reducing …

Large Eddy Simulation Of Dispersed Multiphase Flow, Yejun Gong

Dissertations, Master's Theses and Master's Reports - Open

This thesis covers two main topics. The first is the comparison between the Reynoldsaveraged Navier-Stokes (RANS) simulation and the Large Eddy Simulation (LES) of high injection pressure diesel sprays under non-evaporating or evaporating conditions. The second topic is the comparison of the fuel behavior in the spray process between the hydrotreated vegetable oil (HVO) and the conventional EN 590, diesel #2 and n-heptane fuels.

To validate the RANS and LES spray simulations, comparisons were made with experimental data. The LES turbulence model, the initial drop size distribution (IDSD), the Levich jet breakup model and the CAB drop breakup model are …

Controlling Nanoparticles Formation In Molten Metallic Bilayers By Pulsed-Laser Interference Heating, Mikhail Khenner, Sagar Yadavali, Ramki Kalyanaraman

Mathematics Faculty Publications

The impacts of the two-beam interference heating on the number of core-shell and embedded nanoparticles and on nanostructure coarsening are studied numerically based on the non-linear dynamical model for dewetting of the pulsed-laser irradiated, thin (< 20 nm) metallic bilayers. The model incorporates thermocapillary forces and disjoining pressures, and assumes dewetting from the optically transparent substrate atop of the reflective support layer, which results in the complicated dependence of light reflectivity and absorption on the thicknesses of the layers. Stabilizing thermocapillary effect is due to the local thickness-dependent, steady- state temperature profile in the liquid, which is derived based on the mean substrate temperature estimated from the elaborate thermal model of transient heating and melting/freezing. Linear stability analysis of the model equations set for Ag/Co bilayer predicts the dewetting length scales in the qualitative agreement with experiment.

Kinetic Models Of The Prebiotic Replication Of Dsrna Under Thermal Cycling Conditions, Pauline Schwartz, Dante M. Lepore, Carl Barratt

Chemistry and Chemical Engineering Faculty Publications

We present computational models for the replication of double stranded RNA (dsRNA) or related macromolecules under thermal cycling conditions that would reflect prebiotic (i.e. non-enzymatic) environments. Two models of the replication of dsRNA are represented as multi-step chemical systems. The objective of this investigation was to better understand the kinetic features of such chemical systems. It is shown that thermal cycling in a chemical system is advantageous (relative to a fixed temperature) if there are two competing reactions, one favored at high temperature and one favored at low temperature. For the prebiotic replication of dsRNA, a high temperature favors formation …

Network-Based Data Collection For A Project-Based Freshman Class, Samuel Bogan Daniels, Cheryl Q. Li, David Harding

Mechanical and Industrial Engineering Faculty Publications

The hands-on experience for engineering students is often lacking with class sizes increasing and classroom resources under constant pressure. Even with smaller class sizes and studio classrooms there is only so much equipment and technical support to run experiments and allow for student interaction. Network-based data collection and control may alleviate some of these issues and allow for more hands-on experiences, although remote, in the classroom. This paper discusses the interesting problems and not so obvious pitfalls of setting up some simple network-based data acquisition systems for a multidisciplinary freshman level engineering course. The course as currently taught includes some …

Cfd Study On Aerodynamic Effects Of A Rear Wing/Spoiler On A Passenger Vehicle, Mustafa Cakir

Mechanical Engineering Master's Theses

Aerodynamic characteristics of a racing car are of significant interest in reducing car-racing accidents due to wind loading and in reducing the fuel consumption. At the present, modified car racing becomes more popular around the world. Sports cars are most commonly seen with spoilers, such as Ford Mustang, Subaru Impreza, and Chevrolet Corvette. Even though these vehicles typically have a more rigid chassis and a stiffer suspension to aid in high-speed maneuverability, a spoiler can still be beneficial. One of the design goals of a spoiler is to reduce drag and increase fuel efficiency. Many vehicles have a fairly steep …

Laser Spark Ignition Of Counter-Flow Diffusion Flames: Effects Of Diluents And Diffusive-Thermal Properties, Fidelio Sime Segura

Electronic Theses and Dissertations

A pulsed Nd:YAG laser is used to study laser spark ignition of methane counter-flow diffusion flames with the use of helium and argon as diluents to achieve a wide range of variations in transport properties. The global strain rate and Damkohler number on successful ignition were investigated for the effects of Lewis number and transport properties, which are dependent on the diluent type and dilution level. A high-speed camera is used to record the ignition events and a software is used for pre-ignition flow field and mixing calculations. It is found that the role of effective Lewis number on the …

Computational Analyses For Fluid Flow And Heat Transfer In Different Curved Geometries, Carlin Miller Lucente

ETD Archive

Three-dimensional Computational Fluid Dynamics (CFD) models were developed to simulate fluid flow and heat transfer in a variety of helical channel geometries: circular and elliptical. Laminar flow was observed for Reynolds number between 200 and 1000. Code validation was done for developing steady laminar flow in a circular curved channel. The CFD results were compared to previous numerical results to verify that the model was producing valid results. The curve of the channel has a centrifugal effect on the fluid flow creating secondary flow known as Dean cells. This secondary flow moves the location of the maximum axial velocity towards …

Finite Element Analysis Of Spur Gear Set, V.S.N. Karthik Bommisetty

ETD Archive

A Finite Element procedure has been developed in this work to determine the load distribution factor, Km, of the AGMA formula for a set of spur gear. At first, a spur gear with perfect involute is modeled using a 3-D CAD software. The model is them is assembled with shafts having 1, 2, and 3 degree misalignments. The generated 3-D models were in turn imported to ANSYS workbench to calculate the maximum bending and contact stresses using finite element method. The results generated were then compared with the maximum bending stress results obtained for parallel shafts to estimate the Load …

Mathematical Modeling Of Dc Cardiac Ablation, Sowmya Reddy Narala

ETD Archive

This thesis presents a mathematical modeling of the cardiac DC ablation procedure. The model treats the procedure as a one dimensional heat transfer phenomenon taking place across the thickness of the myocardium. The model further considers a constant 37 oC for one of the boundary condition of the affected tissue, and the temperature of the other boundary condition is set to be a time dependent square-pulse variations. The parameters defining this time dependent boundary condition is used to perform parametric studies to predict tissue temperature at different depth of the myocardium. The initial condition of the myocardium prior to the …

A Finite Element Approach To Stress Analysis Of Face Gears, Lokamanya Siva Manohar Rampilla

ETD Archive

Face Gears have alternative gear-teeth configuration compared to Bevel Gears. Face Gear have a standard spur pinion as opposed to a bevel Gear. This work concentrates on modeling of a Face-gear, Meshed with a spur gear, using CAD Software and Finite Elements Analysis. The bending stress developed at the gear teeth is determined. Numerical results are validated using the bending stress developed between two involute spur gears

Modeling, Simulation And Experimental Verification Of An Electric Bicycle With Regenerative Braking, Maulik Kalolia

ETD Archive

Electric bicycles are widely available in user markets. However their use as a daily commuting vehicle is limited due to the need for frequent recharging. This thesis focuses on the mathematical modeling of electrical bicycle with regenerative breaking. Basic bond graphs methods are discussed here to develop state space models for mechatronic systems. A bond graph based mathematical model of an electric bicycle with regeneration is developed in this thesis. Mathematical models are tested in simulation, generating different road scenarios. Parameters required for the simulation are calculated using an experimental setup. The thesis shows the capability of bond graphs to …

Free Convection Along A Vertical Wavy Surface In A Nanofluid, Deepak Ravipati

ETD Archive

The study of this paper is to introduce a boundary layer analysis for the fluid flow and heat transfer characteristics of an incompressible nanofluid along a vertical wavy surface in a nanofluid. The Resulting transformed governing equations are solved numerically by an implicit finite-difference scheme (Keller-Box method). The results are presented for the major parameters including the wave amplitude , buoyancy ratio parameter , Brownian motion parameter , Thermophoresis parameter and Lewis number. A systematic study on the effects of the various parameters of the local frication factor, surface heat transfer rate (Nusselt number) and mass transfer rate (Sherwood number) …

Mountain Bike Wheel Endurance Testing And Modeling, Robin C. Redfield, Cory Sutela

United States Air Force: Publications

Mountain bike wheels may be evaluated for durability and mode of failure using bump drum test machines that subject wheels to simulated rider loads and uneven terrain. These machines may operate at high speeds in order to accelerate failures, particularly during the design and prototype phase of wheel development. This paper describes a mathematical model of the dynamics of a wheel test drum assembly, and the validation of the model using data recorded during a wheel test. This model will subsequently be applied to better understand the key test operating parameters that must be controlled in order to produce repeatable …

Numerical Simulation Of Buoyancy-Driven Turbulent Ventilation In Attic Space Under Winter Conditions, Shimin Wang, Zhigang Shen, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

Attic design and construction have significant impacts on residential buildings’ energy performance. In order to understand how passive ventilation rates affect ridge-vent attic’s performance, a two-dimensional steady-state finite volume model is employed to simulate the buoyancy-driven turbulent ventilation and heat transfer in a triangular attic space of a gable-roof residential building under winter conditions. The modeled attic has a pitch of 5/12 and a passive ventilation system, consisting of continuous ridge and soffit vents. The v2f model is used to analyze the turbulent air flow and natural convection heat transfer inside the attic. The effects of ambient air temperature, vent …

Numerical And Experimental Investigation Of Vascular Suture Closure, Linxia Gu, Ananth Ram Mahanth Kasavajhala, Haili Lang, James M. Hammel

Department of Mechanical and Materials Engineering: Faculty Publications

Purpose — In order to optimize the performance of the suture for tissue closure, it is essential to develop strategies for devising new and improved techniques that can visualize and compare various suturing techniques. This paper describes an experimental and numerical investigation on the performance of sutured tissue.

Methods — In the experiments, two pieces of glutaraldehyde cross-linked bovine pericardium were sutured together through simple running suture and tensioned to study the performance of the sutured tissue. During testing, the tension load and the total displacement of the specimen were recorded. The strain field of the specimen was simultaneously captured …

Throughput Analysis And Bottleneck Management Of Production Lines, Hatice Ucar

Wayne State University Dissertations

Companies are increasing their manufacturing excellence in order to stay competitive in the globalizing market. Plants are becoming more complex year by year due to increasing product classes, hardware complexity, etc... The design and operation of manufacturing systems is of greater importance today than it was in the past. Many studies have been carried out on the design and operation of manufacturing systems by academicians and practitioners over the years, however, there is still no agreement on how to best predict and improve the factory performance (Gershwin, 2000). The studies are based on either analytical approaches or simulation-based approaches. Success …

Method For Increasing The Efficiency Of Organic Photovoltaic Cells, Jinsong Huang, Yongbo Yuan

Department of Mechanical and Materials Engineering: Faculty Publications

The present invention is directed to an organic photovoltaic cell that contains one or more dipole regions generally disposed between an organic active region and the electrodes and a process for producing such an organic photovoltaic cell.

Manufacturing Process Modeling And Application To Intelligent Control, M. Laine Mears, Parakshit Mehta, Mathew Kuttolamadom, Carlos Montes, Joshua Jones, Wesley Salandro, Drew Werner

Publications

This paper reviews the major findings and intellectual contributions made over the past five years through research in the laboratory of Dr. Laine Mears at Clemson University. The focus of the laboratory’s work is in modeling of traditional and novel manufacturing processes, and application of such models to process control through model-based control strategies. Introducing intelligence to the manufacturing process through physical descriptions of the phenomena being controlled allows for more precise control as compared with reactive systems or those with simple feed-forward control schemes. For traditional processes, new approaches to process characterization allow for more precise control. For novel …

Passive Wireless Antenna Sensors For Crack Detection And Shear/Compression Sensing, Irshad Mohammad

Mechanical and Aerospace Engineering Dissertations - Archive

Despite the fact that engineering components and structures are carefully designed against fatigue failures, 50 to 90% of mechanical failures are due to fatigue crack formation. The severity of the failure depends on both the crack length and its orientation with respect to the loading direction. Many types of sensors are available that can detect fatigue crack propagation. But, crack orientation detection has been rarely reported in the literature. We evaluated a patch antenna sensor capable of detecting crack propagation as well as crack orientation changes. The aim of the sensors would be to evaluate the real-time health condition of …