Heat Transfer, Combustion Commons^™

Integrated Torrefaction-Extrusion System For Conversion Of Fiber-Plastic Wastes Into Solid Fuels, Shreyas Kolapkar

Dissertations, Master's Theses and Master's Reports

Waste generation is increasing, and a significant portion is being landfilled. In parallel, we are constantly pursuing cleaner fuels due to environmental and regulatory factors. To address both these challenges, torrefaction of wastes to produce clean fuels and feedstock for other thermochemical processes is one of the potential solutions. This work focuses on (a) fundamental understanding of the properties of un-torrefied and torrefied wastes and (b) development of a pilot-scale integrated torrefaction-extrusion system for converting fiber-plastic wastes to solid fuels.

In this study, a 60:40 fiber-plastic waste blend was used for performing extensive experiments on densified and un-densified wastes to …

A Road Grade Based Weighting System For Calculating On-Road Distance-Specific Oxides Of Nitrogen Emissions Of Light-Duty Diesel Vehicles, Jason D. Bolyard

Graduate Theses, Dissertations, and Problem Reports (ETD)

Light-duty diesel vehicles have received significant public and governmental scrutiny recently for violating emissions regulations. Similar to the heavy-duty diesel manufacturers during the late 1990’s, some light-duty manufacturers were implementing different control strategies between laboratory certification tests and customer on-road operation. These devices allowed the vehicle to pass certification tests but then use alternative operation on the road during normal use. The alternative operation would allow for better fuel economy but higher oxides of nitrogen (NOx) emissions. Light-duty vehicles are currently certified in the US using chassis dynamometer testing. The effects of all on-road driving conditions are not mimicked in …

Exploring A Platinum Nanocatalytic Microcombustion-Thermoelectric Coupled Device, Dylan Moore Mcnally

Theses and Dissertations

This work aimed to create a first-generation power device for eventual application to portable electronics. A platinum nanoparticle catalytic substrate was employed in a microcombustion-thermoelectric coupled (MTC) device for the purpose of chemical-to-electrical energy conversion. Multiple microcombustion reactors were designed, fabricated, and investigated. Most importantly, the reactor configuration was designed to accommodate thermoelectric generators (TEGs) for power production. Temperature studies with catalytic combustion of methanol-air fuel mixtures were used to evaluate the thermal power generation performance of each reactor. The final reactor design enabled ignition at room temperature with the ability to achieve repeat catalytic cycles upon subsequent exposure to …

Thermo-Fluid Characterizations Of The Powder-Bed Fusion Additive Manufacturing Processes Using Laser And Electron Beam, M Shafiqur Rahman

LSU New Orleans Theses and Dissertations

The powder-bed fusion (PBF) process is a subdivision of Additive Manufacturing (AM) technology where a heat source at a controlled speed selectively fuses regions of a powder-bed material to form three-dimensional (3-D) parts. Two of the most effective PBF processes are selective laser melting (SLM) and electron beam additive manufacturing (EBAM), which can fabricate full-density metallic parts in a layer-by-layer fashion. In this study, thermal behavior and melt-pool dynamics in the PBF process are investigated by developing 3-D multiphysics-based thermo-fluid models for both SLM and EBAM, containing Ti-6Al-4V alloy as a powder-bed material. The laser and electron beams are modeled …

Numerical Evaluation Of Effective Thermal Response Of Heterogeneous Materials, Kevin W. Irick

Mechanical Engineering ETDs

Heterogeneity in materials leads to increased complication of physics, at the level or scale where heterogeneity exists, making analysis and material behavior predictions more difficult. As a result of the intricate descriptions or understanding of the physics required to determine the behavior of a heterogenous material or system, practitioners frequently prefer the use of effective properties or responses. This body of work is dedicated to performing computational analyses on the thermal behavior of heterogeneous materials and evaluating the corresponding analyses using formal verification approaches. Custom finite element method code was used for solving the heat equation in a variety of …

Performance Improvements For Next Generation Falling Particle Receiver Systems, Nathan R. Schroeder

Mechanical Engineering ETDs

Falling particle receiver (FPR) systems are a rapidly developing technology for concentrating solar power applications. Solid particles are used as both the heat transfer fluid and thermal energy storage media. Through the direct solar irradiation of the solid particles, flux and temperature limitations of tube-bundle receives can be overcome leading to higher operating temperatures and energy conversion efficiencies. Particle residence time, curtain opacity, and curtain stability affect the performance of FPR designs. As the particles fall through the receiver the curtain accelerates, increasing its transmissivity thus decreasing the amount of energy absorbed. Multistage release trough structures catch and release the …

Effect Of Adding Palm Fiber To Thermal Conductivity Of Quick Set Concrete, Monica Garcia

Theses and Dissertations

As climate change becomes a more dire issue and more readily accepted by those in power, the demand for local and systemic solutions grows louder. In urban environments, one issue of concern is the contribution of anthropogenic heat from buildings which contributes to localized warming of the environment. A method that can reduce anthropogenic heat is decreasing the thermal conductivity of building materials. The objective of this study is to examine the possibility of using palm fibers to reduce the thermal conductivity of quick-set concrete samples. The data gathered in this study are used to determine the thermal conductivity value …

Heat Transfer Modeling And Optimization Of A Carbonized Microvascular Solar Receiver, Taylor Brown

Boise State University Theses and Dissertations

Concentrating solar power is an emerging renewable energy source. The technology can collect and store thermal energy from the sun over long durations, generating electricity as needed at a later time. Current CSP systems are limited to a maximum operational temperature due to constraints of the working fluid, which limits the maximum possible efficiency of the system. One proposed pathway forward is to utilize a gas phase for the working fluid in the system such as supercritical carbon dioxide.

A composite gas phase modular receiver is being developed by researchers at Boise State University and the University of Tulsa. The …

Development Of A Tiny House Design Tool To Increase Safety, Efficiency, And Cost-Effectiveness, Michael Joseph Stratton Ii

Masters Theses

A growing number of people are choosing to live more sustainably, and this is commonly done through living in an extremely small house, also called a “tiny house”. There is no set definition for a tiny house, but it typically refers to a structure less than 500 ft2, sometimes built by the homeowner, and frequently built on a travel trailer.

The popularity of tiny houses has increased over the years due to different television shows, internet videos, and photo sharing websites, but the technical details are rarely covered, which is why this study examines the structural, stability, weight, and thermal …

Molecular Mechanisms And Design Of Hydrogen-Bonded Materials For Thermal Applications, Jinlong He

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Heat transfer at the nanoscale plays an important role in determining the reliability and performance of many innovative advanced materials technologies such as nanoelectronics, semiconductor, biomedical devices, polymers, and composites. Extensive efforts have been made to design materials with extraordinary thermal properties. However, fundamental understanding of heat transfer in many of these materials is still not lacking, because the thermal transport processes are governed by several factors including molecular morphology and chemical bonding. Among these factors, the atomic bonding between two dissimilar materials or within single materials is of particular interest due to its ubiquity and importance in physical processes. …

Modeling, Simulation, And Testing Of Sweeping Convection, Amir Kiaee

Mechanical Engineering Research Theses and Dissertations

In this study, the new convection heat transfer concept of sweeping convection, using large particles flowing with a fluid in a channel, is considered. This novel concept is inspired by the gas exchange process in alveolar capillaries, where red blood cells (RBCs) flow with blood plasma, yielding very high gas transfer efficiency. An important characteristic of alveolar capillary blood flow, believed to be related to the high efficiency of the lungs, is the snug fitting of the RBCs into the capillaries. This tight fitting sets the RBCs (particles) acting like pistons as they flow downstream with the plasma (fluid), facilitating …

Thermal Control Development Of A Proton Exchange Membrane Fuel Cell System, Ola Mohammed Taha Al-Shalash

Mechanical Engineering Theses

A fuel cell is an electrochemical energy conversion device that uses fuel to generate electricity. It basically converts the chemical energy of reactants directly into electricity without combustion. In a Proton Exchange Membrane Fuel Cell (PEMFC), the reactants, hydrogen and oxygen, are fed into the two electrodes, anode and cathode, respectively. A reaction takes place at each electrode and produces electricity, as well as water, and heat as the by-products. In order to maximize performance of a fuel cell, many factors can be considered for tuning and control. Temperature management is one of these factors.

A thermal-fluid model of a …

Potential Energy Generation From Agricultural Residue In Indonesia, Adrian Rizqi Irhamna

International Programs

Indonesia has great potential of biomass sources from their agricultural residue, which can potentially be used for alternative energy generation. This preliminary research explores the most suitable technology for energy generation from agricultural residue and its challenge for application in Indonesia. The study showed that biomass utilization via the direct combustion process is recommended for energy generation. It is also reported that the pretreatment process of drying and washing, are required to increase the fuel quality and plant efficiency.

Cfd Modelling Of Multiphase Flow In Static Mixer, Silverrajan Viknesvaran

Student Works (2020-2029)

Modelling of Multiphase flow through a Kenics static mixer were presented in this paper. Multiphase mixing is a challenging process in industries such as pharmaceutical, food and petroleum since two-different phases can be immiscible towards each other. Stirred tank mixing is the most common method used in industries. However, this type of method costs a lot in terms of energy and manpower specially when mixing immiscible liquids. Hence, The Kenics Static Mixer could be a good solution for multiphase mixing when its correctly configured and studied. Two phases used in this paper were aqueous solution: refined CMC as continuous phase …

Study Of Heat Transfer And Friction Loss Of Nanofluid Suspension Flow In Square Pipe Heat Exchanger, Krishnan Jayprasanth

Student Works (2020-2029)

An experimentational analysis was done to evaluate heat transfer features of graphene oxide (GO) nanofluid inside the cross section of square cross tube that was exposed to a uniform constant heat flux of the test segments. Lately huge figures of researches have been are proceeded out to examine the outcome of nanofluid in augmentation of the heat transfer rate in numerous heat exchangers particularly using hummer method to attain GO. In this case, advanced hummer method was used to obtain GO and further analyses the effect of the nanofluids. The viscosity and thermal conductivity for the (GO) nanofluids at the …

Kinetic Study Of In-Pipe Water Flow For Power Generation, Surendaran Venuthan

Student Works (2020-2029)

In-pipe turbine generator has a potential to harvest energy from an existing water flow from distribution pipe which have natural and pumping capacity. That flow will be used to convert kinetic energy from the pipe to rotate the turbine. In turn, the turbine may be connected to a generator to produce electric power. The fact that the in-pipe turbine generator will be a useful energy harvesting tool with potential with industrial application is recommended by many scholars. However, there is a concern where there are many types and sizes of pipe that is readily used in the water works industry. …

Cooking Systems Using Aluminum Foam, Ryan Tetsuo Mizukami

Physics

In developing countries, the use of wood burning fires for cooking is cause for illness and death. With this in mind, research was conducted to develop a solar cooking device capable of cooking of soup within 15 mins in order to reduce the negative impacts of cooking with wood. Current methods of solar-based cooking, such as solar concentrators and solar tube ovens, are impractical. A small solar panel is a cost-effective way to produce energy but will not produce enough power to cook within a reasonable amount of time. Even if it is assumed that all of the energy produced …

Investigations Of Air-Water Multiphase Flow In Tubes: Computational Fluid Dynamics, Wei Hong Goo

Student Works (2020-2029)

Mixing is a very crucial process in many industries, such as food processing industry, minerals processing industry, petrochemicals and refining industry, pulp and paper industry, polymer industry, pharmaceuticals industry and many more. There are different types of mixing, such as liquid-gas mixing, liquid-liquid mixing, solid-liquid mixing and many more. The definition of multiphase flow is the simultaneous flow of materials with multiple thermodynamic phases. A lot of process industries require multiphase flows during operation. Bubbly flow is defined as the flow of liquids that contains dispersed gas bubbles. One of the main applications of multiphases flows and bubbly flows is …

Study Of Heat Transfer And Friction Loss Of Nanofluid Suspension Flow In Circular Pipe Heat Exchanger, Ramadas Sandru

Student Works (2020-2029)

This stated experiment focused on the study of convective heat transfer and friction loss in a circular flow passage for Graphene oxide-based nanofluids which are consist of Graphene Oxide/Distilled water with their different wt. % concentrations. These GO/DW based nanofluids where been prepared by using a facile two-step method, while the GO particles were synthesized by a modified hummer method. Four different (0.025, 0.05, 0.075, and 0.1 wt. %) were produced by dispersing graphene particles in distilled water under high probe sonication. The GO/DW based nanofluids flowing in a horizontal shell and tube heat exchanger counter flow under turbulent flow …

What Difference Does A Catalyst Make?, Tammy Guthrie, Mike Jackson, Holly Haney

High School Lesson Plans

Students will use different catalysts for the decomposition of Hydrogen Peroxide, to determine if different catalysts affect the energy that is generated during the reaction.