Energy Systems Commons^™

Introduction To Building Energy Modeling And Analysis Using Energyplus, Jackson C. Burnett

Mechanical Engineering Undergraduate Honors Theses

Retail stores are dynamic environments where human activities significantly influence energy consumption patterns, particularly affecting heating, ventilation, and air conditioning (HVAC) demands. Existing energy models, such as those developed using EnergyPlus, often rely on generalized assumptions about human occupancy and behavior, leading to discrepancies between predicted and actual energy usage. This research aimed to enhance the accuracy of energy modeling for retail stores by conducting a sensitivity analysis of occupancy using EnergyPlus simulations. The study investigated how variations in occupancy levels impact HVAC loads, cooling and heating demands, and overall energy use. Results showed that increasing occupancy leads to higher …

Computational Modeling Of Torque Arm And Load Cell Interactions In Uta Racing Brake Dynamometer, Anthony A. Aiyedun

2025 Spring Honors Capstone Projects - Archive

The UTA Racing Team is developing a brake dynamometer to measure the coefficients of friction of various brake pads and calipers under controlled conditions. The dynamometer simulates on-track braking scenarios, testing brake pads at temperatures up to 1300ºF and pressures similar to racing environments. Its primary goal is to generate accurate friction vs. temperature graphs for various brake pad and rotor combinations, addressing the need for dedicated testing equipment. This project creates an ANSYS simulation of the torque arm and load cell interaction. The computational model accurately represents the relationship between applied torque and measured load cell force, incorporating precise …

Micro Wind Turbine - Modelling And Testing, Mohammad Uzair Bhati

All Theses

The global energy demand continues to rise as people consume more electricity to power their personal electronics, electric vehicles, and consumer products such as outdoor tools. To generate renewable energy, large scale solar and wind farms continue to receive the most commercial attention. However, portable wind energy turbines have the potential to generate sufficient power for cell phones and other electronic devices. There are two types of wind turbines, horizontal and vertical axis each having their pros and cons. Vertical-axis wind turbines are the main focus of this thesis, with a reduction in their form factor or size and portable …

Precooling Ventilation Air For Hospital Operating Rooms And The Affects On Terminal Box Reheat, Joel F. Luke Jr

LSU New Orleans Theses and Dissertations

This study evaluates the impact of climate on the energy performance of two HVAC system configurations—AL1, a conventional air handling system, and AL2, which incorporates a pre-cooling coil and discharge air temperature (DAT) reset strategy. Using EnergyPlus simulations, each system was modeled across multiple U.S. cities representing a wide range of climate zones. Results show that AL2 significantly reduces plant energy consumption, with an average energy savings of 66.61\% compared to AL1. These savings were nearly evenly split between reductions in heating and cooling demands.

A weather normalization analysis using cooling and heating degree days (CDD65 and HDD65) revealed a …

Investigating The Feasibility Of Developing A Fully Solar-Driven Combined Cycle Design, Mazdak Gorji

LSU New Orleans Theses and Dissertations

This study explores the feasibility of a thermal solar-only combined cycle power plant, a concept rarely investigated despite its potential to outperform photovoltaic systems in energy efficiency. Unlike typical hybrid models that use solar energy as a supplement to fuel, this research focuses on a solar-only system that operates a true Brayton-Rankine combined cycle for continuous 24/7 power generation. The study established an efficiency benchmark, comparing eighteen solar generation scenarios across different storage and power block configurations to assess whether the concept was worth pursuing, which it proved to be. Following this, the research focused on simulation, validating ThermoFlex software …

A Simplified Thermal And Battery Model For Off-Grid Solar Air Conditioning In Florida’S Hurricane Context, Steven A. Sanford

Honors Theses

Florida’s hurricane-prone climate often leaves residents without power and at risk of dangerous indoor heat conditions. This thesis examines whether an off-grid, solar-powered air conditioning system can feasibly maintain safe indoor temperatures over a one-week outage period during peak hurricane season. A simplified, lumped-capacitance thermal model and an energy-based (Coulomb-counting) battery state of charge (SoC) approach were developed in MATLAB to simulate a DC-powered air conditioner (the DC48 unit) in a single-zone space. Historical weather and solar irradiance data from Vero Beach, Florida, represent the hot and humid conditions typical of post-hurricane scenarios. The model uses an on/off plus deadband …

Thermal Characterization Of Lithium-Ion Batteries Under Fast Charging Conditions Using Infrared Imaging., Gowthaman Punithakumar

Electronic Theses and Dissertations

Lithium-ion batteries are widely used across various industries due to their long lifespan, high energy density, low self-discharge rate, and absence of memory effect. However, fast charging of Li-ion batteries can cause problems like lithium plating, mechanical damage, and overheating. Temperature plays a key role in battery performance. Measuring temperature accurately is important to improve battery life, efficiency, and safety. However, accurately measuring a battery's internal temperature remains challenging, and the appropriate measurement method depends on factors like range, accuracy, resolution, and cost. Choosing the right temperature measurement method depends on range, accuracy, resolution, and cost. In this study, we …

A Critical Realist Erp Implementation In Zimbabwean Mining Industry Organisations, Jairos Mukwenha

Tanzania Journal of Engineering and Technology (TJET)

This research uses a critical realist framework to examine the factors influencing the success of enterprise resource planning (ERP) system implementation in Zimbabwean mining industry organisations. From the perspective of critical realism, the mining industry in Zimbabwe faces a complex interplay of opportunities and obstacles while implementing ERP systems. The deployment of ERP in mining firms is critically examined in this paper, emphasising how these systems might improve operational efficiency while considering Zimbabwe's particular socioeconomic circumstances. By exploring underlying structures, mechanisms, and outcomes, the research aims to identify critical challenges and opportunities and develop practical recommendations for improving ERP adoption …

Clustering Mini-Grids To Enhance Power Systems Reliability In Distributed Generation, Santos Kihwele

Tanzania Journal of Engineering and Technology (TJET)

This study investigates the effectiveness of clustering mini-grids as a method to improve the reliability and operational stability of distributed generation systems in remote areas, particularly where renewable energy sources are predominant. As renewable resources like solar and wind are increasingly integrated into mini-grids, these systems face various challenges, particularly in maintaining stable voltage and frequency across interconnected networks. Such issues are compounded by the intermittent nature of renewable energy sources and the lack of extensive communication infrastructure in rural or resource-constrained settings. To address these control challenges, this study applies droop control techniques to two mini-grids in Uganda, utilizing …

Synthetic Inertia Provision For Load Frequency Control In Networks With High Penetration Of Renewable Energy Sources, Paulina Mkoi

Tanzania Journal of Engineering and Technology (TJET)

The integration of renewable energy sources (RESs) such as solar photovoltaic (PV) and wind energy has become a promising solution as the world shifts toward clean energy. Solar PV and wind resources are increasingly replacing conventional synchronous generators, leading to reduced system inertia and increased vulnerability to frequency instability during disturbances. To address this challenge, this study proposes a novel synthetic inertia provision strategy using a battery energy storage system (BESS) integrated alongside solar PV. The proposed method dynamically compensates for the loss of inertia by considering the variability of solar PV output due to changes in irradiance and temperature. …

How Can The Adoption Of Biodegradable Packaging In The Beverage Industry Specifically Contribute To Reducing Single-Use Plastic Waste, And What Regulatory Or Cost-Related Challenges Hinder Its Widespread Implementation In Developing Countries?, Rebecca Aba Gaisie

2025 Awards for Excellence in Student Research and Creative Activity - Documents

This research investigates the potential of biodegradable packaging to reduce single-use plastic waste in the beverage industry and explores the regulatory and cost-related barriers to its adoption in developing countries. The beverage sector is a major contributor to global plastic pollution, and biodegradable alternatives offer a promising path toward sustainability. Using a mixed-methods approach, this study combines qualitative interviews with industry experts and case studies of businesses implementing biodegradable solutions, alongside quantitative survey data from 100 manufacturers and 200 consumers across Africa, Asia, and Latin America. Findings reveal that while biodegradable packaging significantly reduces plastic waste and appeals to environmentally …

Advancing Solar Farm Resilience: Cfd-Driven Wind Load Optimization, Aly Mousaad Aly

Faculty Publications

This study investigates wind load design methods for ground-mounted solar panels and arrays by comparing Computational Fluid Dynamics (CFD) simulations with design standards. A case study of a solar farm impacted by Hurricane Maria examines the effects of elevation height, tilt angle, and variations in the American Society of Civil Engineers (ASCE) standards on wind loads and structural failure. Turbulence models, including Reynolds Stress Model, k–ε Model, and Large Eddy Simulation (LES), are used to analyze wind pressures, lift, drag, and peak pressures. Results show Phase 1 experienced higher wind loads than Phase 2 due to design differences. A cost-benefit …

Performance Evaluation Of Novel And Efficient Integration Of Solar-Assisted Hvac System With Solar Humidification-Dehumidification Desalination System, Ahmed M. Khaira, Ahmed Hossam, M. M. Bassuoni, Mohamed Abdelgaied

Journal of Engineering Research

This paper aims to study the performance of a novel and efficient integration of a solar-assisted HVAC system with a solar humidification-dehumidification desalination system for hot climates. The proposed hybrid system aims to achieve thermal comfort conditions, produce freshwater, reduce the required power input, and reduce environmental pollution. To achieve this idea, we designed, constructed, and tested the novel hybrid system consisting of a solar-assisted HVAC system incorporated with a solar humidification-dehumidification desalination system. The device takes the rejected hot air that has passed over a solid desiccant and feeds it into a solar still to extract fresh water, while …

Numerical Investigation Of Heat Transfer And Pressure Drop In A Circular Microchannel Using Sio₂ Nanofluids, Mahmoud G. Abdelfatah, Osama E. Abd-Ellatif, Ahmed A. A. Attia, Abdelrady O. Elnady

Journal of Engineering Research

A numerical investigation was conducted to analyze the flow characteristics and heat transfer performance of a circular microchannel. using water and SiO₂+pure water nanofluids with volume fractions of 0.3%, 0.7%, and 1%. The microchannel was subjected to a constant heat flux of 100W, and the pressure drop, friction factor, and thermal resistance were evaluated for different Reynolds numbers ranging from 250 to 850. The results show that the addition of SiO₂ nanoparticles enhances the thermal performance of the microchannel by reducing the thermal resistance by up to 1.9% compared to pure water. However, the pressure drop increases with higher Np …

The Spice (Sustainable, Physics-Inspired Culinary Education) Lab – A Digestible Few-Nexus Educational Platform, Carla Ramsdell

National Collaborative for Research on Food, Energy, and Water Education (NC-FEW)

The SPICE (Sustainable, Physics-Inspired Culinary Education) Lab is a unique educational platform that enables participants from a wide disciplinary background to engage and become literate in the unique connections between food, energy and water. This small but mighty space allows for outreach education in many formats, including formal college courses, university-centered hands-on activities and public outreach.

The work performed in this space fills a unique need in the FEW-Nexus education opportunities because it is adaptable to many learners and learning opportunities and its focus on kitchen science makes these concepts approachable which can later be expanded to understand other critical …

Enhancing Wind Turbine Performance Using Flow Control Techniques: A Mini Review, Fady Nouh, Amr Ismaiel, Hasan Eleashy

Future Engineering Journal

In the face of escalating environmental concerns and the finite nature of non-renewable energy sources, the imperative for sustainable energy solutions has never been clearer. Among these solutions, wind energy emerges as a significant contender, poised to play a pivotal role in the global energy transition. Wind, a result of solar energy variations and Earth's topography, offers immense potential for electricity generation. Understanding wind patterns and harnessing its energy through efficient technologies like wind turbines is crucial. This paper explores diverse flow control methods, focusing on passive and active approaches in wind turbine configurations. It discusses advancements in the field …

Wind Turbine Rotor Test Stand, Ashlen Brooke Sperry, Cayley Mckee, Kristofer Lee Pascua, Francisco Medina

Mechanical Engineering

Dr. Lemieux and the mechanical engineering department at Cal Poly are renowned for the countless projects that allow students to be a part of hands-on learning and the “Learn by Doing” experience. One such experience is the wind energy class that requires students to design, build, and test wind turbine rotors; however, a test stand for these rotors is needed. Dr. Lemieux and the senior project team will design and build a test stand that will enable the simultaneous testing of two student-designed rotors at the existing wind turbine site. In addition to energy measurement, Lemieux emphasizes the importance of …

Design, Test, And Comparison Of A Photovoltaic Thermal Hybrid Solar Collector Utilizing A Thermosiphon, And Theory And Analysis Of Related Predictive Computer Model, Lance Brown

Master's Theses

Design, construction and testing of a photovoltaic thermal collector, or PVT, was completed to determine efficiency improvements of this system compared to a conventional solar panel and to find the thermal energy gained through hot water storage. Flow, driven by density changes from solar radiation, creates a thermosiphon, moving water without the use of a pump and ultimately drawing heat away from the solar panel. This is done to create a more efficient solar panel as well as decreasing potential damage due to high temperatures. Evaluation of electrical efficiency, thermal efficiency and flowrate allow for comparison between other PVT systems. …

Numerical Simulation Of Airflow Properties Of The Naca 6420 Airfoil Using The Transition Rans K-Ε Model, Oluwaseyi O. Alabi, Saidat A. Salisu, Oyeyemi T. Aforolagba -Balogun, Temitope A. Ladigbolu, Ayotunde O. Fasina, Anas Bala

Al-Bahir

This study investigates the airflow properties around the airfoil using numerical simulation, addressing the longstanding challenge of accurately predicting transition phenomena in turbulent flows. The importance of this research lies in its potential to improve the design and performance of airfoils in various engineering applications, such as wind turbines, and aircraft. A custom 2-dimensional airfoil model was created using Airfoil instruments, featuring a 6% maximum curvature, 40% curvature position, and 20% thickness. COMSOL Multiphysics software performed computations at a velocity of over 19 hours, with data analyzed at 60-minute intervals. The Transition turbulent model was employed to simulate the airflow …

Comparative Evaluation Of Linear Regression, Cross Validation And Regularization Approaches In Multivariate Data Analysis, Ransford Owusu, Felix Yeboah, Francis Effah Boateng

Data Science and Data Mining

This study evaluates linear regression and its enhanced variants incorporating cross-validation and regularization techniques for high-dimensional, multivariate datasets. We address challenges such as multicollinearity and overfitting. Methods including Ridge, LASSO, and Elastic Net are compared against ordinary least squares regression. Empirical analysis using an automobile dataset for fuel efficiency prediction shows that while OLS regression captures basic relationships, its limitations are mitigated through regularization and cross-validation, resulting in improved model interpretability. The findings provide a comprehensive framework for predictive modeling in complex data environments and offer insights into statistical methodology and practical applications in the automobile industry.