Isolation And Production Of Tandem Collagen Binding Domain From Clostridial Collagenase Colg And Developments In C1q Reagent Production For Future Molecule Characterization Work,
2022
University of Arkansas, Fayetteville
Isolation And Production Of Tandem Collagen Binding Domain From Clostridial Collagenase Colg And Developments In C1q Reagent Production For Future Molecule Characterization Work, Stephanie Beitle
Chemical Engineering Undergraduate Honors Theses
This thesis covers a two part project: the production methods to create a double collagen binding domain molecule with a growth factor for wound healing applications and the development of a new in-house production method for isolating C1q from bovine blood. The wound healing molecule was created using transformation, sonication, and purification before being tested via electrophoresis SDS page and Western blots to confirm the molecule’s presence. The C1q in-house production method utilizes an ultrafiltration flow cell rather than dialysis at a critical point in the process, allowing for researchers to not only be able to use a single small …
Investigating The Effect Of Polymer Hydrogels On The Antimicrobial Properties Of Activated Carbon Through The Utilization Of Bacterial, Viral, And Parasitic Microorganisms,
2022
The University of Southern Mississippi
Investigating The Effect Of Polymer Hydrogels On The Antimicrobial Properties Of Activated Carbon Through The Utilization Of Bacterial, Viral, And Parasitic Microorganisms, Zoe Gunter
Honors Theses
Activated carbon (AC) has long been utilized in biomedical applications due to its innate antimicrobial characteristics. However, little is understood about the mechanism of action that allows AC to prohibit the propagation of different pathogen species. To further ascertain these characteristics and how they affect the propagation of pathogens, procedures were designed with bacterial, viral, and parasitic agents which were utilized in conjunction with varying concentrations of polymer hydrogels to examine the antimicrobial efficacy of AC. The studies performed for this thesis were conducted employing coconut-based AC and Noveon® AA-1 Polycarbophil USP or Carbopol® 974P NF hydrogels which, …
Insect Antennae As Bioinspirational Superstrong Fiber-Based Microfluidics,
2022
Clemson University
Insect Antennae As Bioinspirational Superstrong Fiber-Based Microfluidics, Griffin J. Donley
All Theses
Nature is frequently turned to for inspiration for the creation of new materials. Insect antennae are hollow, blood-filled fibers with complex shape, and are cantilevered at the head. The antenna is muscle-free, but the insect can controllably flex, twist, and maneuver it laterally. To explain this behavior, a comparative study of structural and tensile properties of the antennae of Periplaneta americana (American cockroach), Manduca sexta (Carolina hawkmoth), and Vanessa cardui (painted lady butterfly) was performed. These antennae demonstrate a range of distinguishable tensile properties, responding either as brittle fibers (Manduca sexta) or strain-adaptive fibers that stiffen when stretched (Vanessa cardui …
Mechanochromic Tunable Emissions Of Hydrogel Encapsulated Radioluminescent Crystalline Colloidal Arrays,
2022
Clemson University
Mechanochromic Tunable Emissions Of Hydrogel Encapsulated Radioluminescent Crystalline Colloidal Arrays, Sarah Mell
All Theses
Crystalline colloidal arrays (CCAs) are periodic dielectric arrays composed of monodisperse, negatively charged nanoparticles with unique optical characteristics. Poly(styrene-co-propargyl acrylate) (PS-PA) based copolymer nanoparticles synthesized via an emulsion polymerization form the basis of the CCAs in this work. The negatively charged surfaces result in the colloidal nanoparticles self-assembling into a face-centered cubic (fcc) crystal-like structure. The long-range order and spatial periodicity of the array result in a rejection wavelength, characteristic of CCAs, in which a specific wavelength of light is forbidden from propagating throughout the optical system. The CCAs exhibit mechanochromism through a rejection wavelength shift corresponding to a change …
Synthesis Of Monodisperse Nanoscintillators At High Temperatures For Biomedical Relevant Applications,
2022
Clemson University
Synthesis Of Monodisperse Nanoscintillators At High Temperatures For Biomedical Relevant Applications, Eric Zhang
All Dissertations
Luminescent sub-100 nm particulates continuously generate immense research interest in the biomedical field for imaging, theranostics, and optogenetics. Conventionally, upconversion nanoparticles or UV activated semiconductors are studied, however these materials are limited by biological barriers such as the skin which reduces the penetration depth of these excitation sources, tissue's auto- fluorescence, and toxicity. One approach to overcome these challenges is to use nanoscintillators (sub-100 nm materials that can generate visible light using high energy excitation sources such as x-rays) which can generate light locally to the human body. Numerous scintillators have been reported since the discovery of x-rays from the …
Synthesis And Molecular Processes Governing Self-Healing Polymeric Materials,
2022
Clemson University
Synthesis And Molecular Processes Governing Self-Healing Polymeric Materials, Siyang Wang
All Dissertations
Self-healing polymers capable of recovering from physical damages are promising materials for advanced technologies. In these studies, we developed routes to achieve self-healable properties in acrylic-based copolymers that rely on non-covalent dipolar interactions present in essentially all polymeric materials. Using a combination of spectroscopic tools, thermo-mechanical analysis, and molecular dynamic (MD) simulations, these studies have shown that dipolar interactions lead to conformational changes of macromolecular segments which, in turn, result in self-healing without external intervention. This dissertation also describes the development of novel self-healable acrylic-based covalent adaptable networks (CANs) that combine reprocessing and self-healing properties. The utilization of dipolar interactions …
Synthesis And Phase Transition Characterization Of Liquid Crystal Membranes With Slit-Like Pores,
2022
University of Arkansas, Fayetteville
Synthesis And Phase Transition Characterization Of Liquid Crystal Membranes With Slit-Like Pores, Isaac Hopwood
Chemical Engineering Undergraduate Honors Theses
Membranes with slit-like pores have been of interest for some time due to their ability to reject smaller particles than traditional cylindrical-pored membranes at the same fluid flux. However, using liquid crystals as a template for this sort of membrane has not been thoroughly investigated. In this study, the liquid crystal mixture of RM257 (2-Methyl-1,4-phenylene bis(4-(3-(acryloyloxy)propoxy)benzoate)) and 5CB (4-Cyano-4'-pentylbiphenyl) for the purpose of manufacturing membranes with slit-like pores, the phase transition behavior of this LC mixture at various mole fractions of RM257, and the impact of mole fraction of RM257 in the liquid crystal (LC) mixture and membrane manufacturing conditions …
Extractive Membranes For The Detection And Screening Of Waterborne Plutonium,
2022
Clemson University
Extractive Membranes For The Detection And Screening Of Waterborne Plutonium, James Foster
All Dissertations
The development of rapid screening tools for special nuclear materials remains a crucial focus for nonproliferation efforts. Traditional approaches for the analysis of trace-level Pu isotopes in water requires tedious and time-consuming sample preparation steps that do not lend well to expeditious screening. Therefore, a novel analytical method that combines both Pu concentration and source preparation into a single detection system would make for an invaluable tool for nuclear security applications. Extractive membranes absorbers can help to fulfill this role as they are capable of concentrating Pu to detectable limits while subsequently serving as alpha spectrometry sample sources. In Chapter …
Sustainable Composites From Agricultural And Petroleum Waste,
2022
Clemson University
Sustainable Composites From Agricultural And Petroleum Waste, Menisha S. Karunarathna
All Dissertations
Green gas emission has been a pervasive and persistent subject of debate for a prolonged period. The soaring number of industries and vehicle fuel emissions presage a concomitant rise in global CO2 emissions. Global cement production is responsible for 8% of the total CO2 release, yet, the production continues due to the surging demand. Hence, there is an ongoing quest to find alternatives for cement and building materials produced with zero to lower CO2 emissions. The work presented in this dissertation focuses on finding recyclable, zero CO2 gas-producing high sulfur biocomposites materials, which can compete with …
Effects Of Sizing Agents On Mechanical Properties Of Carbon Fiber–Polymer Composites Via Fused Filament Fabrication Additive Manufacturing.,
2022
University of Louisville
Effects Of Sizing Agents On Mechanical Properties Of Carbon Fiber–Polymer Composites Via Fused Filament Fabrication Additive Manufacturing., Benjamin D. Mitchell
Electronic Theses and Dissertations
This study demonstrated the effects of changing the sizing agent parameter during the preparation of carbon fibers on the mechanical properties of composite made with acrylonitrile butadiene styrene (ABS) as the matrix material and carbon fibers as the fiber material. Three types of sizing agents produced by Allnex were used to coat three different batches of carbon fibers that were mixed with a torque rheometer and extruded with a barrel-style melt extruder into continuous spools of 1.75 mm filament for use with commercial 3D printers. Tensile tests were conducted on the filaments and tensile bars printed from the materials. Results …
Additive Manufacturing Of Variable Contrast Computed Tomography Anatomical Phantoms Using A Single Feedstock In Fused Filament Fabrication,
2022
University of New Orleans
Additive Manufacturing Of Variable Contrast Computed Tomography Anatomical Phantoms Using A Single Feedstock In Fused Filament Fabrication, Cory J. Darling
LSU New Orleans Theses and Dissertations
Anatomical phantoms used in biomedical education and training benefit greatly from Fused filament fabrication’s (FFF) ability to rapidly produce complex and unique models. Current materials and methods used in FFF have limited ability to accurately produce phantoms that can mimic the radiological properties of multiple biological tissues. This research demonstrates that the CT contrast of FFF produced models can be modified by varying the concentration of bismuth oxide in acrylonitrile butadiene styrene (ABS) filaments and a tunable CT contrast that mimics the CT contrast ranging from fatty tissue to cortical bone using a single composite filament without introducing artificial image …
Simplified Synthesis Of Conjugated Polymers Enabled Via 1,4-Dihydropyrrolo[3,2-B]Pyrrole,
2022
Kennesaw Sate University
Simplified Synthesis Of Conjugated Polymers Enabled Via 1,4-Dihydropyrrolo[3,2-B]Pyrrole, Kenneth-John Jack Bell
Master of Science in Chemical Sciences Theses
Conjugated polymers have attracted significant attention as the active layer material in organic electronics, such as organic photovoltaics and light-emitting diodes, partly due to the ability to influence a broad range of properties through structural design motifs. However, high performance conjugated polymers suffer from numerous synthetic steps, generation of toxic waste, and harsh reaction conditions all of which impart additional costs that inhibit their widespread utilization. Therefore, an emphasis on reducing synthetic complexity and utilizing abundant, commercially available starting materials is needed for organic electronics to reach their full potential. Dihydropyrrolo[3,2-b]pyrrole (H2DPP) chromophores offer a simple one-pot synthesis …
Detection Of Trace Heavy Metals In Water: Development Of Electrochemical Sensors,
2022
Kennesaw State University
Detection Of Trace Heavy Metals In Water: Development Of Electrochemical Sensors, Quang Lam, Joel Mututeke
Symposium of Student Scholars
The presence of heavy metals in our ecosystem poses significant ecological and physiological consequences. As a result, numerous techniques are developed for the detection of contaminants in aqueous solutions. However, early and trace detection of such contaminants still remains a challenge. Amongst many techniques, electrochemistry driven sensors have shown promise due to their possibility of miniaturization and low-cost. Our research investigates the use of electrically conducting polymer and atomically thin carbon materials as electrodes towards the development of electrochemical sensor. Nanocomposite electrode films have been synthesized and fabricated using in-situ polymerization technique and the relationship between number of cycles of …
Novel Thermal Coating For High-Speed Airplanes,
2022
Kennesaw State University
Novel Thermal Coating For High-Speed Airplanes, Abinash Satapathy, Lakshay Battu, Liam Watson, Nazanin Rajabi
Symposium of Student Scholars
In comparison to various other materials, Carbon Fiber, specifically Carbon Fiber Reinforced Polymers (CFRP), is pre-eminent amongst other materials for use on aeronautical systems. Due to its high specific strength (strength-to-weight ratio), CFRP is prominent for carrying heavy loads while maintaining a lightweight build. However, when influenced by heat resulting from air resistance, CFRP is known to undergo serious degradation that would significantly decrease the effectiveness of the polymers. To prevent this degradation and maintain the strength of the CFRP, thermal protective layers (TPLs) are designed to shield the CFRP from heat exposure. This research is focused on the examination …
Prospects For Using Metal-Polymer Composite Structures In The Gear Manufacturing,
2022
Tashkent State Technical University named after Islam Karimov
Prospects For Using Metal-Polymer Composite Structures In The Gear Manufacturing, Umid Mamasobirov, Shoraxmat Shoobidov, A F. Husanboyev
Technical science and innovation
In this paper, some thermoplastic polymer composites and filler composites for the production of metal-polymer gear transmissions are presented. Efforts have been made to expand the raw material base and identify ways to increase the durability of gears through technological and design measures.
Machine Learning Assisted Discovery Of Shape Memory Polymers And Their Thermomechanical Modeling,
2022
Louisiana State University and Agricultural and Mechanical College
Machine Learning Assisted Discovery Of Shape Memory Polymers And Their Thermomechanical Modeling, Cheng Yan
LSU Doctoral Dissertations
As a new class of smart materials, shape memory polymer (SMP) is gaining great attention in both academia and industry. One challenge is that the chemical space is huge, while the human intelligence is limited, so that discovery of new SMPs becomes more and more difficult. In this dissertation, by adopting a series of machine learning (ML) methods, two frameworks are established for discovering new thermoset shape memory polymers (TSMPs). Specifically, one of them is performed by a combination of four methods, i.e., the most recently proposed linear notation BigSMILES, supplementing existing dataset by reasonable approximation, a mixed dimension (1D …
Polyaniline/Cobalt Nanoparticle Composite Films,
2022
University of Nebraska-Lincoln
Polyaniline/Cobalt Nanoparticle Composite Films, Rifat Mahbub
Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research
Polymer nanocomposites have been gaining attention because of the enhanced properties of the element materials it can offer. These composites have been used in biological sector as well as quantum computing and memory devices. These are also used as different kind of sensors. Polymer composites incorporated with magnetic nanoparticles can modify the magnetic property of the nanoparticles and that has huge potential to be used in different sort of applications.
This work aims to develop a polymeric nanocomposite incorporating a conducting polymer and magnetic nanoparticles. The influence of the conducting polymer on the magnetic property of the nanoparticles was investigated. …
Tuning Electrochemical Interactions And Polymer Electrolyte Interfaces For Enhanced Organic Acid Separations Using Electrodeionization,
2022
Louisiana State University and Agricultural and Mechanical College
Tuning Electrochemical Interactions And Polymer Electrolyte Interfaces For Enhanced Organic Acid Separations Using Electrodeionization, Matthew Leo Jordan
LSU Doctoral Dissertations
Chemical separations are critical processes for chemical and industrial plants to purify and isolate products however current separation technologies, such as distillation, rely on energy intensive processes. Electrochemical separation processes, such as electrodialysis and electrodeionization, are an energy efficient alternative that are emerging as an alternative for thermal-based separations. Organic acids are weakly ionizable species and susceptible for purification from process streams using electrochemical processes. Recently the fermentation route has garnered greater attention as a means for producing value-added chemicals, such as organic acids, from a renewable feedstock and aiding the circular economy. Some of the challenges electrodialysis faces for …
Thermomechanics Of Semiconducting Polymers And Their Morphological Phenomena,
2022
The University of Southern Mississippi
Thermomechanics Of Semiconducting Polymers And Their Morphological Phenomena, Luke Galuska
Dissertations
In contrast to conventional silicon-based electronics, semiconducting polymers show great promise for emerging applications in soft, flexible, and ductile electronic technologies. This is due to their polymeric nature, tailorable structure, and sub-100 nm device thickness. Despite this mechanical novelty, there remains a poor understanding of their structure-property-processing relationships, which has hindered growth within the field. This dissertation elucidates these relationships through investigation of their thermomechanics, and morphological phenomena. This was accomplished through the following projects:
1) To demonstrate the impact of backbone rigidity on semiconducting polymer thermomechanics, we varied the backbone rigidity of an NDI-based polymer by inserting flexible methylene …
Optimization Of A Novel Nipam-Based Thermoresponsive Copolymer For Intramuscular Injection As A Myoblast Delivery Vehicle To Combat Peripheral Artery Occlusive Disease,
2022
Cal Poly SLO
Optimization Of A Novel Nipam-Based Thermoresponsive Copolymer For Intramuscular Injection As A Myoblast Delivery Vehicle To Combat Peripheral Artery Occlusive Disease, Quentin R. Klueter
Master's Theses
There is a need for a minimally invasive delivery method to enable cell therapies to combat peripheral artery occlusive disease (PAOD) in end stage patients. Myoblasts show promise as a cell mediated therapy but warrant an improved delivery method to increase cell retention in the region of interest because of their adherent nature, relative to previously used BM-MNC’s that are non-adherent. Contemporary issues with achieving successful cell therapies of vasculature can be mainly characterized by the lack of clinical translation from promising animal studies and absence of cell delivery scaffolding. Naturally, polymers have been widely experimented with as grafts to …
