Polymer and Organic Materials Commons^™

Solar Pv Panels-Self-Cleaning Coating Material For Egyptian Climatic Conditions, Iman El-Mahallawi, Engy Elshazly, Olugbenga Timo Oladinrin Dr., Muhammad Qasim Rana Dr.

Renewable Mechanical Energy

No abstract provided.

Investigating Features And Output Correlation Coefficient Of Natural Fiber-Reinforced Poly(Lactic Acid) Biocomposites, Andreas Federico, Siti Norasmah Surip, Wan Nor Raihan Wan Jaafar, Jaka Fajar Fatriansyah, Agrin Febrian Pradana

Journal of Materials Exploration and Findings

Polylactic acid (PLA) material has the potential to be applied in various industrial fields, but this material has shortcomings in terms of mechanical properties, especially mechanical strength, due to brittleness nature of PLA. The manufacture of PLA composite material with the addition of natural fibers as a reinforcing phase is one of the methods to increase the impact strength and maintain the biodegradable properties of the material. However, in theory, there are many factors that affect the mechanical properties of composite materials, thus making the mechanical properties of composites more complex than monolithic materials. The mechanical properties of these composite …

Fabrication And Non-Covalent Functionalization And Characterization Of Graphene-Based Devices On Novel Substrate Cadmium Trithiophosphate (Iv) — Cdps, Abayomi Omotola Omolewu

Graduate Theses and Dissertations

With graphene at the center of several application areas such as sensing, circuits, high-frequency devices for communication systems, etc., it is crucial to understand how the intrinsic properties of devices made from graphene and other materials like platinum and palladium nanoparticles affect the performance of such devices for the specific application area. Many graphene-based devices for different application areas have focused mainly on the material composition of the graphene-based devices and how it affects performance parameters for the specific application. However, it would be insightful to understand how the intrinsic electrical properties of the graphene devices for different applications affect …

Characterization Of Thermal Gelation Properties In Bioresorbable Thermally Activated Hydrogel Polymers For Hernia Surgery Applications, Alexander Mayfield

All Theses

Hydrogel adhesives are a new class of materials with excellent biocompatibility, which makes them very attractive for biomaterial applications. It has been previously shown that Tetronic T1107, a four-arm poly (propylene oxide)-poly (ethylene oxide) (PPO-PEO) block copolymer, is useful as a chemical crosslinking thermo-responsive hydrogel for bioadhesive applications. The end groups of this polymer are modified with acrylate and N-hydroxysuccinimide (NHS) functional groups. The acrylate end group gives the polymer cohesive properties with long-range chemical crosslinking using dithiothreitol (DTT), while the NHS end group gives the polymer adhesive properties through bonding with amines found in organic tissue. It was found …

3d Printed Multicomponent Polymer Based Materials Via Hybrid Filaments: Fabrication And Characterization, Erik Antonio

All Dissertations

Additive manufacturing, also known as 3D printing, promises a manufacturing revolution for both industry and academic circles. One of the most widely used method of 3D printing is Fused Deposition Modeling (FDM) or Fused Filament Fabrication (FFF), which requires a thermoplastic filament to be directed towards a heating block and then deposited via extrusion layer by layer to produce a finished part. However, there are significant issues with this technology, mainly a limitation on the materials available for use and mechanical property deficiencies when compared to traditional manufacturing. These issues are brought about by the temperature limited nature of the …

Modeling Phase Behavior And Agglomeration In Polymer Systems Incorporating Complex Architectures: From Bottlebrush To Lysozyme, Sidong Tu

All Dissertations

Using computational modeling, we focus on the phase behavior of multicomponent systems incorporating enzyme and bottlebrush polymers where the agglomeration of multiple components occurs. We start with all-atom molecular dynamics (MD) simulations of lysozyme and polyethylene glycol (PEG) based polymer mixture to understand the mechanisms of preservation of lysozyme bioactivity at high temperatures with addition of PEG-derived bottlebrushes. We show that the PEG part of bottlebrushes phase separates at high temperature and shells the access of water to lysozyme, resulting in the preservation of lysozyme secondary structures. We then developed a coarse-grained model using a Dissipative Particle Dynamics approach to …

Modeling Pattern Formation And Morphology Development In Polymer Networks, Yao Xiong

All Dissertations

Topography and morphology have considerable impacts on the functionalities of soft materials in an entire range of applications from smart optics to tissue engineering. Adapting theoretical and computational approaches, we focus on the dynamics of pattern formation and morphology development in polymer networks. This dissertation starts with studying the dynamical control of pattern formation in confined thermo-responsive poly(N-isopropylacrylamide) (PNIPAAm) gel films. The patterns are formed due to mechanical instabilities. We perform a linear stability analysis and identify the limits of this analysis in predicting pattern formation in gels. We then study the restructuring between patterns and hysteresis phenomena …

Development Of A Decellularized Hydrogel Composite And Its Application In A Novel Model Of Disc-Associated Low Back Pain In Female Sprague Dawley Rats, David Lillyman

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Chronic low back pain is a global socioeconomic crisis compounded by an absence of reliable, curative treatments. The predominant pathology associated with chronic low back pain is degeneration of intervertebral discs in the lumbar spine. During degeneration, nerves can sprout into the intervertebral disc tissue and be chronically subjected to inflammatory and mechanical stimuli, resulting in pain. Pain arising from the intervertebral disc, or disc-associated pain, is a complex, multi-faceted disorder which necessitates valid animal models to screen therapeutics and study pathomechanisms of pain.

While many research teams have created animal models of disc degeneration, the translation of these platforms …

Bbt Acoustic Alternative Top Bracing Cadd Data Set-Norev-2022jun28, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are
(a) a one-piece base for the standard kit's (Martin-style) bracing,
(b) 277 Ladder-style bracing, and
(c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars.

The CADD data set for each of the three (3) top bracing designs includes …

Super-Hydrophobic Hybrid Coatings Preparation Used By Methyltrithoxysilane (Mtes) And Tetraethylorthosilicate(Teos), Quanwei Li

International Conference on Durability of Concrete Structures

超疏水材料由于其优异的疏水自洁性能，在航空航天、海洋工程、除冰防腐等领域具有广阔的应用前景。本文采用简单的溶胶-凝胶制备超疏水涂层。 . 以甲基三乙氧基硅烷（MTES）和原硅酸四乙酯（TEOS）为前驱体，水解缩合后形成粗糙结构，1H,1H,2H,2H-全氟癸基三乙氧基硅烷（FAS）为低表面能的表面活性剂，系统研究了各自的最佳配比零件。涂层的疏水性和形貌分别通过水接触角测量、扫描电子显微镜（SEM）表征。同时，其官能团通过红外光谱表征。基于大量的实验和优化测试，

Obtaining Wrapping Paper Used In Furniture Wrapping And Quality Delivery And Determining Its Quality Indicators, E A. Egamberdiyev, A R. Makhkamov, G R. Rakhmonberdiev

Technical science and innovation

Composite materials samples have been obtained from cellulose and bazalt fibers based on cellulose-containing plants. The properties of paper samples have been studied: the amound of cellulose, the amound of ash, water absorption and breaking load. Gained results show that the composite material with the addition of basalt fibers is more durable. Half-finished cellulose fibers obtained from basalt, straw and wastepaper are more prouse than ones obtained from cotton plant

Predictive Thermal Modeling And Characterization Of Ultrasonic Consolidation Process For Thermoplastic Composites, Madeline Kirby

LSU Master's Theses

Ultrasonic consolidation (USC) of thermoplastic composites (TPCs) is a highly attractive and promising method to manufacture high-performance composites. This work focuses on USC of dry carbon fiber (CF) fabrics with high-temperature polyphenylene sulfide (PPS) films. Experimental trials to assess feasibility of the process are time-consuming. Consequently, a predictive thermal model would facilitate process parameters selection to reduce expensive trial-and-error approaches. This paper presents a 2D finite element model of samples under consolidation, incorporating equations for viscoelastic heating, matrix phase change, and material properties. Theoretical temperature profiles for nodes of interest were compared to the corresponding experimental temperature curves for various …

Photon Attenuation Layer Silicon-Based X-Ray Detector: Quantum Efficiency Investigation And Algorithmic Processing Of Individual Detection Events, Kevin Larkin

ENGS 88 Honors Thesis (AB Students)

State-of-the-art X-ray detectors either use silicon direct detection—which is inefficient, as silicon is mostly transparent to high-energy X-rays—or rely on expensive scintillators to first down-convert X-ray photons to lower energies. Dr. Eldred Lee of Dartmouth College recently completed doctoral research that suggested the promise of a novel alternative: silicon-based X-ray detectors that utilize photon attenuation layers rather than scintillators. While Dr. Lee’s work is certainly rigorous and meritorious, background noise controls were rendered less effective by circumstances. The work presented in this thesis succeeded in implementing much better background noise controls for a series of new tests to compare the …

Bbt Side Mold Assy, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set covers the design and fabrication information of the ETSU Guitar Building Project’s BBT (OM-sized) Side Mold Assy for use with the STEM Guitar Project’s standard acoustic guitar kit. The extended 'as built' data set contains an overview file and companion video, the 'parent' CADD drawing, CADD data for laser etching and cutting a drill &/or layout template, CADD drawings in AutoCAD .DWG and .DXF R12 formats of the centerline tool paths for creating the mold assembly pieces on an AXYZ CNC router, and support documentation for CAM applications including router bit specifications, feeds, speed, multi-pass …

Stabilization Of Palm Wood Using Water-Based Impregnation, David A. Barnes

Materials Engineering

Impregnation is a technique for stabilizing wood that involves saturating the material in a liquid and allowing it to cure before use. Stabilization methods such as this are employed for a variety of reasons; chiefly, the low dimensional stability of wood and palm means that they are subject to several failure modes that arise from changing environmental conditions, such as cracking, warping, and bending. Samples of Borassus flabellifer, black palm, provided by DuraPalm were impregnated with solvent-based and water-based stabilizers, and untreated wood samples used as a control group. Kop-Coat WoodYouth® Plus was used as a solvent-based stabilizer, and impregnation …

Effects Of Release Materials And Temperature Ramp Rates On The Surface Finish Of Carbon-Fiber Composite Components, Sudeep Louis, Thucmy Dang, Ethan Schlocker

Materials Engineering

Toray Advanced Composites is interested in improving their carbon fiber reinforced polymers (CFRP) manufacturing process by enhancing their control on the amount of surface roughness for varied customer preference. Surface roughness of CFRP is important in post-production processes including coating, priming, and painting. This project seeks to determine the effects of three release materials and two temperature ramp rates on the surface finish of CFRP. The release materials used were Tooltech, FEP, and Frekote 770-NC. The two initial temperature ramp rates were 1°F/min and 2°F/min. Surface roughness was measured using a profilometer and analyzed using Ra values. Ra is an …

Analysis Of Novel Corrosion Resistant Maraging Steels For Use In Additive Manufacturing, Bradley Michael Samuel, James Knowlton Smith

Materials Engineering

Stainless maraging steel has been proven to be an industry standard material for plastic injection molds. Its high hardness and corrosion resistance extend the lifetime of the tool. This alloy system is also well-suited to additive manufacturing, which can be utilized to form internal cooling channels, further increasing tool life. Using Rapid Alloy Development (RAD) Oerilkon METCO is developing a new composition of stainless maraging tool steel that has high hardness/strength, is corrosion resistant, and has additive-capable melting and solidification properties. This study tests the hardness and corrosion resistance of the new RAD alloys against the current market competitor Corrax …

In Situ Marine Biodegradation Of Poly(Lactic) Acid And Thermoplastic Starch Blends, Brittany Denicholas

Materials Engineering

Marine life has been suffering from macro- and microplastics since the inception of petroleum-based plastic. Bio-based biodegradable polymers such as PLA and TPS can help mitigate the damage done by petroleum plastics. Blending PLA and TPS can reduce the cost while preventing a significant effect on the material properties. PLA/TPS blend compositions such as 90/10, 80/20, 70/30 could be candidates for a solution. The PLA/TPS blends have been submerged in a marine environment at the Cal Poly Pier in Avila Beach for 8 weeks. Three sample sets containing three of each blend composition were collected every week and tested in …

Citric Or Acetic Acid Effects On The Crosslinking Of Pvoh, Samuel Carr, Erika Szaldobagyi

Materials Engineering

Transportation and shipping processes are the most dangerous times for food due to harsh handling and frequent temperature changes. Plain corrugated boxes cannot withstand the damp environment caused by melting ice that is used to keep foods cold and fresh. To minimize damage, a protective polymer film coating can be applied. These coatings can be unsafe when used with food and will lead to excess waste by limiting the recyclability of the boxes. The purpose of this project was to produce nontoxic crosslinked PVOH films to determine suitability for a cost effective, biodegradable, and repulpable corrugated box coating. Polyvinyl alcohol …

Determining The Efficacy Of A Silica And Bacterial Cellulose Composite Model System, Hannah Martin, Daisy Kamp

Materials Engineering

Bacterial cellulose (BC) is a sustainable alternative to petroleum-based polymer films for synthetic leather applications. Synthesized by a symbiotic culture of bacteria and yeast, BC is a three-dimensional structure composed of cellulose microfibrils. However, pure BC lacks certain desirable properties such as high tensile strength. Previous studies have shown that loading BC with nanoparticles to form nanocomposites has improved BC’s mechanical properties. However, this was not studied as a function of particle size. This study focuses on using silica/BC nanocomposites to model the impact that particle size and silica soaking concentrations have on the uptake efficiency of these particles into …