Materials Science and Engineering Commons^™

An Evaluation Of The Efficiency Of Compartmented Alginate Fibres Encapsulating Rejuvenator As Asphalt Pavement Healing System, Amir Tabakovic, Luke Schuyffel, Aleksandar Karac, Erik Schlangen

Articles

This paper explores the potential methods for evaluating a healing system for asphalt pavements. The healing system under investigation involves compartmented calcium-alginate fibres encapsulating an asphalt binder healing agent (rejuvenator). This system presents a novel method of incorporating rejuvenators into asphalt pavement mixtures. The compartmented fibres are used to distribute the rejuvenator throughout the pavement mixture, thereby overcoming some of the problems associated with alternate asphalt pavement healing methods, i.e., spherical capsules and hollow fibres. The asphalt healing efficiency methods to be evaluated in this paper include: (i) standard test methods for asphalt pavements, such as the Indirect Tensile Strength …

Real-Time Sensing Of Single-Ligand Delivery With Nanoaperture-Integrated Microfluidic Devices, W. Elliott Martin, Ning Ge, Bernadeta R. Srijanto, Emily Furnish, C. Patrick Collier, Christine A. Trinkle, Christopher I. Richards

Chemistry Faculty Publications

The measurement of biological events on the surface of live cells at the single-molecule level is complicated by several factors including high protein densities that are incompatible with single-molecule imaging, cellular autofluorescence, and protein mobility on the cell surface. Here, we fabricated a device composed of an array of nanoscale apertures coupled with a microfluidic delivery system to quantify single-ligand interactions with proteins on the cell surface. We cultured live cells directly on the device and isolated individual epidermal growth factor receptors (EGFRs) in the apertures while delivering fluorescently labeled epidermal growth factor. We observed single ligands binding to EGFRs, …

Ismar / Rmcmr 2017 Abstract Book - Joint Conference Of The International Society Of Magnetic Resonance, The Rocky Mountain Conference On Epr, And The Rocky Mountain Conference On Magnetic Resonance

Rocky Mountain Conference on Magnetic Resonance

Abstracts from the 59th annual meeting of the Rocky Mountain Conference on Magnetic Resonance, hosted jointly with the International Society of Magnetic Resonance and the Rocky Mountain Conference on EPR. Held in Quebec City, Canada, July 23-28, 2017.

Estimating Index Of Refraction For Specular Reflectors Using Passive Polarimetric Hyperspectral Radiance Measurements, Jacob A. Martin, Kevin C. Gross

Faculty Publications

Results of a method of estimating index of refraction from passive, polarimetric hyperspectral imaging radiance measurements are presented. As off-nadir viewing hyperspectral imaging platforms gain prominence, estimating index of refraction, which is invariant to viewing angle, may prove advantageous to estimating the emissivity, which is not. Results show that index of refraction can be retrieved to within 8% rms error for fused silica and sapphire glass targets, while simultaneously estimating object temperature. The accuracy and self-consistency of this technique for estimating index of refraction are shown to compare favorably to the maximum smoothness temperature–emissivity separation algorithm. Additionally, the results show …

Fabricating Ordered 2-D Nano-Structured Arrays Using Nanosphere Lithography, Chenlong Zhang, Sandra Cvetanovic, Joshua M. Pearce

Department of Materials Science and Engineering Publications

Recent advances in the use of plasmonic metamaterials to improve absorption of light in thin-film solar photovoltaic devices has created a demand for a scalable method of patterning large areas with metal nanostructures deposited in an ordered array. This article describes two methods of fabricating ordered 2D nanosphere colloidal films: spin coating and interface coating. The two methods are compared and parameter optimization discussed. The study reveals that:

• For smaller nanosphere sizes, spin coating is more favorable, while for larger nanospheres, the angled interface coating provides more coverage and uniformity.

• A surfactant-free approach for interface coating is developed …

Comparison Between Single Loading–Unloading Indentation And Continuous Stiffness Indentation, Yun-Fei Jia, Yuan-Yuan Cui, Fu-Zhen Xuan, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Experiments are performed on fused silica, Si, and duplex stainless steel to examine whether the CSM (continuous stiffness indentation) method will provide approximately the “same” results of contact modulus and indentation hardness as those measured from the quasi-static single loading–unloading indentation. The experimental results show that the elastic modulus measured by the CSM method is compatible with that by the quasi-static loading–unloading method for hard materials, while there exists a percentage difference of ∼21.3% between the smallest value and the largest vale of the measured indentation hardnesses from the CSM method for fused silica and a percentage difference of ∼15.3% …

Graphite And Graphene-Oxide Based Pgm-Free Model Catalysts For The Oxygen Reduction Reaction, Joseph Henry Dumont

Nanoscience and Microsystems ETDs

The world currently relies heavily on fossil fuels such as coal, oil, and natural gas for its energy. Fossil fuels are non-renewable, that is, they draw on finite resources that will eventually dwindle, becoming too expensive or too environmentally damaging to retrieve. One alternative source of energy are fuel cells, electrochemical devices that convert chemical energy to cleanly and efficiently produce electricity. They can be used in a wide range of applications, including transportation, stationary, portable and emergency power sources. Their development has been slowed by the high cost of PGM electrocatalysts needed at both electrodes as well as sluggish …

Novel Durable Antimicrobial Ceramic With Embedded Copper Sub-Microparticles For A Steady-State Release Of Copper Ions, Adam J. Drelich, Jessie Miller, Robert Donofrio, Jaroslaw Drelich

Michigan Tech Publications, Part 1

Using pottery clay, porous ceramic stones were molded and then decorated with copper sub-microparticles inside the pores. Copper added antimicrobial functionality to the clay-based ceramic and showed ability in disinfecting water. Populations of both Staphylococcus aureus and Klebsiella pneumoniae in contaminated water were reduced by >99.9% in 3 h when exposed to an antimicrobial stone. This antimicrobial performance is attributed to a slow release of copper into water at both room and elevated temperatures. Copper is leached by water to produce ion concentrations in water at a level of 0.05–0.20 ppm after 24 to 72 h immersion tests. This concentration …

Investigating Rheological, Morphological And Mechanical Properties Of Pbs/Pbat Blends, A Boonprasertpoh, D Pentrakoon, J Junkasem

Journal of Metals, Materials and Minerals

Morphological, rheological and mechanical properties of various biodegradable poly(butylene succinate) (PBS)/poly(butylene adipate-co-terephthalate) (PBAT) blends via conventional melt blending technique are studied. The morphology, rheology, and tensile properties of the PBS/PBAT blends were observed by scanning electron microscope (SEM), rotational rheometer, and universal testing machine, respectively. The SEM micrographs of the PBS/PBAT blends reveal an occurrence of phase separation indicating by a presence of spherical particles/cavities for a range of 10 to 30 wt% (i.e. PBS90-PBS70), and 70 to 90 wt% (i.e. PBS30-PBS10) PBT content and co-continuous structure for a range of 40 to 60 wt% (i.e. PBS60PBS40) PBAT content. The …

Strengthening Of The Astm-356 Alloy With Silicon Carbide Particles, Jaime Hinojosa-Torres, Diego Sánchez-García, Andrés Herrera-Vázquez, Jose Luis Velázquez-Ortega

Journal of Metals, Materials and Minerals

Extensive research has been done in recent years in composites of metallic matrix in order to get better melting practices, mechanical properties and structure. In this work, steel metal mould was previously preheated to three different temperatures. The ASTM-356 alloy was melted and heated to 993 K. For the purpose of reinforcing, silicon carbide particles (mesh: 325, 400) were introduced into the melted alloy then stirred. For each obtained solid its solidification time was recorded. Cylindrical specimens were tested in a tension test machine in order to obtain the ultimate tensile strength (UTS) and fracture toughness (KIc) values. Hardness measurements …

Computationally Connecting Organic Photovoltaic Performance To Atomistic Arrangements And Bulk Morphology, Matthew L. Jones, Eric Jankowski

Materials Science and Engineering Faculty Publications and Presentations

Rationally designing roll-to-roll printed organic photovoltaics requires a fundamental understanding of active layer morphologies optimized for charge separation and transport, and which ingredients can be used to self-assemble those morphologies. In this review article we discuss advances in three areas of computational modeling that provide insight into active layer morphology and the charge transport properties that result. We explain the computational bottlenecks prohibiting atomistically-detailed simulations of device-scale active layers and the coarse-graining and hardware acceleration strategies for overcoming them. We review coarse-grained simulations of organic photovoltaic active layers and show that high throughput simulations of experimentally-relevant length scales are now …

Synthesis,Structure And Properties Of Ruthenium Polypyridyl Metalloligand Based Metal-Organic Frameworks, Mamatha Polapally

Masters Theses & Specialist Projects

Metal-organic frameworks (MOFs) have been extensively studied because of their amazing applications in gas storage, purification, photocatalysis, chemical sensing, and imaging techniques. Ruthenium polypyridyl complexes have been broadly considered as photosensitizers for the conversion of solar energy and photoelectronic materials. With this aspect, we have synthesized three new ruthenium polypyridyl based MOFs ([Ru(H2bpc)Cu(bpc)(Hbpc)2(H2O)]·5H2O (1), [Ru(H2bpc)(Fe(bpc)(Hbpc)2(H2O)2]·6H2O (2) and [Ru(H2bpc)Ni(bpc)(Hbpc)2(H2O)2]·6H2O (3)) from ruthenium(III) chloride, bpc (2,2’- bipyridine-4,4’-dicarboxylic acid) ligand, and 3d M(II) metal ions (M(II)= Cu(II), Fe(II), Ni(II)). These MOFs were synthesized under hydro or solvothermal conditions by using water, ethanol or methanol as solvents. The crystal structures of the new compounds …

Anion Exchange Membrane Capacitive Deionization Cells, Ayokunle Omosebi, Xin Gao, Nicolas Holubowitch, Zhiao Li, James Landon, Kunlei Liu

Center for Applied Energy Research Faculty and Staff Publications

The electrochemical response of capacitive deionization (CDI) employing a single anion exchange membrane (AEM-CDI) is contrasted to conventional two-membrane CDI (MCDI) formed with complementary anion and cation exchange membranes. Pristine activated carbon cloth electrodes that possess native positive surface charge in solution were used as both anode (positive electrode) and cathode (negative electrode) in these cells. In a separate set of tests to investigate the impact of surface charge modification on deionization responses, the single and dual membrane cells were formed with asymmetric electrodes (AEM-aCDI and aMCDI) consisting of nitric acid oxidized electrodes that possess negative surface charge as the …

Mechanical And Thermal Properties Of Eucalyptus Fiber Composites From Blend Between Biodegradable Poly(Butylene Succinate) And Recycled Pet, N Hongsriphan, P Dangmanee, M Mankrut, W Jantaraka

Journal of Metals, Materials and Minerals

The goal of this study was to enhance rigidity and to reduce cost of the PBS-based composites by blending with recycled poly(ethylene terephthalate) (r-PET) and Eucalyptus fibers. Prior compounding, Eucalyptus fibers were treated with alkali and γ-methacryloxypropyl trimethoxysilane (MPS) solution for compatibility improvement. PBS and r-PET were melt blended in a twin-screw extruder with the weight ratio of 95/5, 90/10, and 80/20 wt%, and compounded with MPS treated Eucalyptus fibers using fiber loading of 3, 5, and 7 wt% of composites. Samples were characterized by tensile test, notched Izod impact test, SEM, NMR, and DSC. It was found that r-PET …

Study On Physical, Optical And Luminescence Of Er3+ In K2o-Cao-B2o3 Glasses For Photonic Application, N Wantana, S Insiripong, Y Ruangthaweep, J Kaewkhao

Journal of Metals, Materials and Minerals

In this work, potassium calcium borate glasses doped with of Er3+ ions (KCaBEr) have been prepared by a melt quenching technique. The glass physical, optical and luminescence properties have been investigated as a function of Er2O3 concentration. Density was measured by Archimedes' principle and brought to calculate the molar volume. The optical absorption spectra were measured in the ultraviolet, visible light and near-infrared regions. The emission and excitation spectra represents the strong emission from glass sample. All results indicate the potential to use KCaBEr glass in the photonic applications such as laser and optical amplification.

Eu3+ Doped Borosilicate Glass For Solid-State Luminescence Material, S Rakpanich, N Wantana, Y Ruangthaweep, J Kaewkhao

Journal of Metals, Materials and Minerals

The Eu3+ doped potassium borosilicate (KBSi:Eu3+) glasses were prepared by the melt quenching technique. The physical, optical and luminescence properties of glasses were investigated. Glass density and molar volume increase with increasing of Eu2O3 concentration. Glasses absorbed photons in the visible light and near infrared region. Since 394 nm excitation, glasses emitted the strong light with 613 nm in milliseconds of lifetime. CIE 1931 chromaticity diagram exhibits that emission from KBSi:Eu3+ glass is reddish-orange light. In summary, this KBSiEu glass performs the interesting property for using in the photonic devices such as solid-state laser and LEDs.

Antireflective Surface Of Nanostructures Fabricated By Cf4 Plasma Etching, W Somrang, S Denchitcharoen, P Eiamchai, M Horprathum, C Chananonnawathorn

Journal of Metals, Materials and Minerals

In this research, the nanostructures surface were fabricated by the CF4 plasma etching process on the SiO2-based substrates for antireflection applications. The nickel films were firstly deposited on the substrates by the sputtering system. The prepared Ni layers were then annealed at 500°C for 1 minute in order to promote dewetting process to be used as metal masks. During the etching process, CF4 etching condition was performed for 15-60 min to create the SiO2 nanopillars. After the etching process, the samples were immersed in nitric acid for 5 min to remove the nickel masks. The SiO2 nanopillars without Ni were …

Effect Of Sputtering Power On The Structure Of Dc Magnetron Sputtered Vanadium Nitride Thin Films, A Buranawong, N Witit-Anun

Journal of Metals, Materials and Minerals

Vanadium nitride (VN) thin films were deposited on Si substrates by reactive DC unbalanced magnetron sputtering. Effect of sputtering power on the structure of the as-deposited films was investigated. The crystal structure, thickness, roughness, surface morphology and chemical composition of the films were characterized by X-ray diffraction (XRD), atomic force microscopy (AFM), field emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray spectroscopy (EDS), respectively. The results showed that the as-deposited VN thin films had fcc structure with (111), (200) and (220) planes, varying with the sputtering power. The crystallite size and lattice constant of films were in the range …

Size And Shape Distributions Of Primary Crystallites In Titania Aggregates, Eric A. Grulke, Kazuhiro Yamamoto, Kazuhiro Kumagai, Ines Häusler, Werner Österle, Erik Ortel, Vasile-Dan Hodoroaba, Scott C. Brown, Christopher Chan, Jiwen Zheng, Kenji Yamamoto, Kouji Yashiki, Nam Woong Song, Young Heon Kim, Aleksandr B Stefaniak, D. Schwegler-Berry, Victoria A. Coleman, Åsa K. Jämting, Jan Herrmann, Toru Arakawa, Woodrow W. Burchett, Joshua W. Lambert, Arnold J. Stromberg

Chemical and Materials Engineering Faculty Publications

The primary crystallite size of titania powder relates to its properties in a number of applications. Transmission electron microscopy was used in this interlaboratory comparison (ILC) to measure primary crystallite size and shape distributions for a commercial aggregated titania powder. Data of four size descriptors and two shape descriptors were evaluated across nine laboratories. Data repeatability and reproducibility was evaluated by analysis of variance. One-third of the laboratory pairs had similar size descriptor data, but 83% of the pairs had similar aspect ratio data. Scale descriptor distributions were generally unimodal and were well-described by lognormal reference models. Shape descriptor distributions …

Metallographic Analysis And Electrical Resistivity Of The 1045 Steel After Being Heat-Treated, M Quiroga Agurto, E Medrano Atencio, F Américo Reyes Navarro, J G Miranda Ramos

Journal of Metals, Materials and Minerals

Herein, it was studied the structural evolution of the AISI 1045 steel water-quenched and oilquenched, respectively, from a temperature higher than the critical to various temperatures between 800 and 820°C. The two quenching media were used at 16.5°C. Microstructural variations occurred in the quenched 1045 steel. Also, by using the four-terminal sensing, it was measured the evolution of the electrical resistivity of the quenched samples; it was found that quenching at different temperatures provoked a complex behavior. It was noticed a major increase in the electrical resistivity in the case of water-quenched samples. Besides, when compared samples before and after …