Metrology Of Dna Arrays By Super-Resolution Microscopy,
2017
Boise State University
Metrology Of Dna Arrays By Super-Resolution Microscopy, Christopher M. Green, Kelly Schutt, Noah Morris, Reza M. Zadegan, William L. Hughes, Wan Kuang, Elton Graugnard
Materials Science and Engineering Faculty Publications and Presentations
Recent results in the assembly of DNA into structures and arrays with nanoscale features and patterns have opened the possibility of using DNA for sub-10 nm lithographic patterning of semiconductor devices. Super-resolution microscopy is being actively developed for DNA-based imaging and is compatible with inline optical metrology techniques for high volume manufacturing. Here, we combine DNA tile assembly with state-dependent super-resolution microscopy to introduce crystal-PAINT as a novel approach for metrology of DNA arrays. Using this approach, we demonstrate optical imaging and characterization of DNA arrays revealing grain boundaries and the temperature dependence of array quality. For finite arrays, analysis …
Modeling Micro-Porous Surfaces For Secondary Electron Emission Control To Suppress Multipactor,
2017
Air Force Institute of Technology
Modeling Micro-Porous Surfaces For Secondary Electron Emission Control To Suppress Multipactor, James M. Sattler, Ronald Coutu Jr., Robert A. Lake, Tod V. Laurvick, Tyson C. Back, Steven. B. Fairchild
Faculty Publications
This work seeks to understand how the topography of a surface can be engineered to control secondary electron emission (SEE) for multipactor suppression. Two unique, semi-empirical models for the secondary electron yield (SEY) of a micro-porous surface are derived and compared. The first model is based on a two-dimensional (2D) pore geometry. The second model is based on a three-dimensional (3D) pore geometry. The SEY of both models is shown to depend on two categories of surface parameters: chemistry and topography. An important parameter in these models is the probability of electron emissions to escape the surface pores. This probability …
Microstructure Evolution During Compaction Of Powder Blends,
2017
Howard University
Microstructure Evolution During Compaction Of Powder Blends, Ayush Giri, Marcial Gonzalez, Yasasvi Bommire
The Summer Undergraduate Research Fellowship (SURF) Symposium
Powder compaction is a manufacturing technology used to transform powder particles into a solid material with unique anisotropic microstructure and low porosity. It is widely used by pharmaceutical companies to manufacture tablets with desired properties. These properties are the result of the microstructure obtained during the compaction process. Therefore, it is imperative to understand the mechanics underneath the constituent granular particles that eventually contribute to properties of the manufactured tablets. Computational simulation tools have been developed in the past to study powder compaction for pharmaceutical tablets. However, most of the already existing tools limit their scope to study individual particles …
Investigating Tantalum As A Plasma-Facing Component For Nuclear Fusion Reactors,
2017
Purdue University
Investigating Tantalum As A Plasma-Facing Component For Nuclear Fusion Reactors, Arvind Sundaram, Jitendra K. Tripathi, Theodore J. Novakowski, Ahmed Hassanein Ph. D.
The Summer Undergraduate Research Fellowship (SURF) Symposium
Nuclear fusion is a potential source for producing unlimited environment-friendly energy. Tungsten (W) is selected as the primary candidate material for plasma facing component in nuclear fusion reactors due to its high melting temperature (3695 K), low sputtering erosion yield and strong mechanical properties. However, recent investigations on W have confirmed that it undergoes severe surface morphology changes during low energy He plasma and/or ion irradiation similar to a harsh fusion environment. Additionally, our previous studies indicate that tantalum (Ta) may show better resistance to the harsh radiation environment and is therefore worthy of investigation. Hydrogen retention properties, specifically deuterium …
Understanding Powder Compaction With Single Particle Measurements,
2017
Purdue University
Understanding Powder Compaction With Single Particle Measurements, Wentao Chen, Ankit Agarwal, Marcial Gonzalez
The Summer Undergraduate Research Fellowship (SURF) Symposium
Powder compaction is the process of transforming granular media into a solid body with a high relative density (low porosity) and a unique anisotropic microstructure. It is critical to understand the physical mechanisms of the compaction process in order to identify powder properties and optimal process parameters for achieving desired properties of the final product. Tools that can simulate particle rearrangement and deformation during the compaction process are usually developed to guide such fundamental understanding. This study aims at understanding powder compaction using particle mechanics approach. Specifically, it employs the nonlocal contact formulation to predict the contact behavior of a …
Simulating Dynamic Failure Of Polymer-Bonded Explosives Under Periodic Excitation,
2017
Liberty University
Simulating Dynamic Failure Of Polymer-Bonded Explosives Under Periodic Excitation, Rachel Kohler, Camilo Duarte Cordon, Marisol Koslowski
The Summer Undergraduate Research Fellowship (SURF) Symposium
Accidental mishandling of explosive materials leads to thousands of injuries in the US every year. Understanding the mechanisms behind the detonation process is crucial to prevent such accidents. In polymer-bonded explosives (PBX), high-frequency mechanical excitation generates thermal energy and can lead to an increase in temperature and vapor pressure, and potentially the initiation of the detonation process. However, the mechanisms behind this energy release, such as the effects of dynamic fracture and friction, are not well understood. Experimental data is difficult to collect due to the different time scales of reactions and vibrations, so research is aided by running simulations …
Modelling Catalytic Structures With Python And Ase,
2017
St. Mary's College of Maryland
Modelling Catalytic Structures With Python And Ase, Tommie L. Day, Peilin Liao, Pilsun Yoo
The Summer Undergraduate Research Fellowship (SURF) Symposium
Voltaic cells hold great potential as a source of clean electricity generation. These fuel sources are more efficient than combustion engines, and they do not produce environmentally harmful by-products. The electrochemical reaction which occurs within the cell is typically catalyzed by platinum, which increases the cost. The search for a better performing, less expensive catalyst is hindered by the lack of a complete, predictive theory of catalysis. Using Quantum Espresso and the Atomic Simulation Environment library for Python, we created a tool for nanoHUB.org which can visually and computationally model catalytic surfaces. This tool can simulate nanoparticles and metallic surfaces …
Irradiation-Induced Nanocluster Evolution,
2017
William Penn University
Irradiation-Induced Nanocluster Evolution, Didier Ishimwe, Matthew J. Swenson, Janelle P. Wharry
The Summer Undergraduate Research Fellowship (SURF) Symposium
Oxide dispersion strengthened steel (ODS) and commercial ferritic-martensitic (F-M) alloys are widely accepted candidate structural materials for designing advanced nuclear reactors. Nanoclusters embedded in the steel matrix are key microstructural features of both alloy types. Irradiation from nuclear fusion and fission affects the morphology of these nanoparticles, altering the performance of the alloys and potentially decreasing their usable lifetime. Thus, it is important to understand the effect of irradiation on these nanoparticles in order to predict long-term nuclear reactor performance. It was found that the evolution of nanoclusters in each material is different depending on the experimental irradiation parameters. The …
Core-Shell Copper And Nickel Nanofoam: Uniform Electroplating And Properties,
2017
Washington State University
Core-Shell Copper And Nickel Nanofoam: Uniform Electroplating And Properties, Hassan Zbib, David Bahr
The Summer Undergraduate Research Fellowship (SURF) Symposium
Characterizing materials on the nanoscale is a key factor to enhance nanotechnology in diverse applications, ranging from electronics to energy fields. However, controlling the structure of the material at the nanoscale or mimicking the nanoscale features of a structure that already exists requires linking processing conditions to the nanostructure. This work focuses on solids that show porous patterns at the nano-micro scale; these are often called cellular solids and classified into two categories: honeycombs and foams. This study focuses on nanofoams; with ligament dimensions in the sub-micron scale. Electrospinning has been developed to produce nanofoam structures of polymers with controlled …
Structure-Force Field Generator For Molecular Dynamics Simulations,
2017
Universidad de Los Andes - Colombia
Structure-Force Field Generator For Molecular Dynamics Simulations, Carlos M. Patiño, Lorena Alzate, Alejandro Strachan
The Summer Undergraduate Research Fellowship (SURF) Symposium
Atomistic and molecular simulations have become an important research field due to the progress made in computer performance and the necessity of new and improved materials. Despite this, first principle simulations of large molecules are still not possible because the high computational time and resources required. Other methods, such as molecular dynamics, allow the simplification of calculations by defining energy terms to describe multiple atom interactions without compromising accuracy significantly. A group of these energy terms is called a force field, and each force field has its own descriptions and parameters. The objective of this project was to develop a …
Cylindrical Shell Based Phase Transforming Cellular Materials: Designing A Recoverable Energy Dissipating Material,
2017
Purdue University
Cylindrical Shell Based Phase Transforming Cellular Materials: Designing A Recoverable Energy Dissipating Material, Gordon F. Jarrold, David Restrepo, Nilesh Mankame, Pablo Zavattieri
The Summer Undergraduate Research Fellowship (SURF) Symposium
Energy dissipating materials are used in a variety of impact events to protect more important parts of a system; one example of this is a football player’s helmet protecting a brain. A major drawback to classic energy dissipating materials however is that they dissipate energy through plastic deformation, meaning that after a single use, permanent deformations will prevent the material from being reusable to the same capacity as initially. We have designed a 1D cellular material in which geometric phase transformations in cylindrical shell elements are the primary energy dissipating mechanism, allowing for recoverability after use while keeping high energy …
Effect Of Particle Interactions On Powder Flow Behavior,
2017
Universidad de Los Andes - Colombia
Effect Of Particle Interactions On Powder Flow Behavior, Ivana A. Penagos, Carolina P. Mora, Teresa Carvajal
The Summer Undergraduate Research Fellowship (SURF) Symposium
The study of powder flow behavior is essential for the development of processing technologies in many industries. In fact, powders have a major function in diverse types of manufacturing, such as pharmaceuticals, foods, chemicals, materials, minerals and cosmetics. This leads to an increasing demand for the development of reliable methods to assess powder flow problems in industry. This research intends to provide a general insight into how surface interactions and particle properties may alter powder flowability. The materials used for this study were lactose, starch, milk powder, cocoa and chocolate. These vary in their interparticle forces as well as on …
Atomistic Simulations Of Novel Nanoscale Semiconductor Devices: Resistance Switches And Two-Dimensional Transistors,
2017
Texas A & M University - College Station
Atomistic Simulations Of Novel Nanoscale Semiconductor Devices: Resistance Switches And Two-Dimensional Transistors, Joseph P. Anderson, Mahbubul Islam, David Guzman, Alejandro Strachan
The Summer Undergraduate Research Fellowship (SURF) Symposium
As transistors get smaller, we are achieving record levels of memory density. However, there is a limit to how small transistors can be made before their functionality breaks down. Thus alternatives to traditional transistor technology are needed. The two such technologies we examined are: resistance switching devices, which reversibly grow metal filaments through a dielectric, and two-dimensional transistors, which are capable of breaking through the scalability limit of traditional transistors. In order to design resistance switching devices which create filaments with some level of consistency, the dynamics of the filament formation need to be explored. Herein we model this process …
Study Of Persistent Slip Bands Formed By Low Cycle Fatigue On Nickel-Based Superalloys At Room Temperature,
2017
Wesleyan College
Study Of Persistent Slip Bands Formed By Low Cycle Fatigue On Nickel-Based Superalloys At Room Temperature, Anjola Uprety, Sae Matsunaga, Michael S. Titus Dr., Michael D. Sangid Dr., Alberto W. Mello Dr.
The Summer Undergraduate Research Fellowship (SURF) Symposium
The ability of Ni-based superalloys to withstand temperatures in excess of 11000C makes them useful for applications in the hottest components in jet engines, gas turbines, and thrust engines. Increasing the efficiency of these gas turbine engines helps to reduce the fossil fuel consumption and the production of greenhouse gasses. A common mode of failure in these Ni-based superalloys is low cycle fatigue, in which narrow regions of high dislocation density, which are known as persistent slip bands (PSBs), can develop and lead to crack initiation. A detailed understanding of the formation and structure of PSBs has eluded …
Comparison Of Pm-Hip To Cast Alloy 625 For Nuclear Applications,
2017
Purdue University
Comparison Of Pm-Hip To Cast Alloy 625 For Nuclear Applications, Alexander L. Bullens, Keyou Mao, Janelle P. Wharry, Esteban Bautista
The Summer Undergraduate Research Fellowship (SURF) Symposium
PM-HIP, or Powder Metallurgy and Hot Isostatic Pressing, metals have been a low cost alternative to forged and cast structural metals within various industries. The nuclear industry has recently developed interest in PM-HIP alloys, but further research needs to be done to quantify their mechanical properties and characterize the microstructure. Specifically, we must understand the mechanical and microstructural evolution of PM-HIP materials after long-term operation at the elevated temperatures that PM-HIP components will experience in service. We focus on Ni-base alloy Inconel 625, and compare the PM-HIP version to the cast version. Our methodology consists of annealing samples to various …
Improving Methods Of Doping On Black Phosphorus,
2017
Electrocal and Computer Engineering
Improving Methods Of Doping On Black Phosphorus, Yuqin Duan, Adam Charnas, Jingkai Qin, Peide Ye
The Summer Undergraduate Research Fellowship (SURF) Symposium
Black phosphorus (BP) is a 2D semiconducting material with high carrier mobility. It is usually p-type due to oxidation states near its valence band. Although achieved through other growth methods, n-type doping has not yet been accomplished through the modern chemical vapor transport (CVT) growth method. To address this issue, small amounts of tellurium were added to Red Phosphorus to act as a dopant during the CVT growth process in addition to tin(Sn) and tin(IV) iodide, which facilitate growth. The chemicals are heated up to 600°C and precisely cooled in a 21-hour process, during which BP crystals should form. After …
Residual Stress Measurements On The Tig Weld Joint Of 57fe15cr25ni Austenitic Steel For Structural Material Applications By Means X-Ray Diffraction Techniques,
2017
Center for Science and Technology of Advanced Materials, National Nuclear Energy Agency (BATAN), Puspiptek Serpong, South Tangerang 15314, Indonesia
Residual Stress Measurements On The Tig Weld Joint Of 57fe15cr25ni Austenitic Steel For Structural Material Applications By Means X-Ray Diffraction Techniques, Parikin Parikin, Agus Hadi Ismoyo, Riza Iskandar, Arbi Dimyati
Makara Journal of Technology
Measurements of residual stress on the 57Fe25Cr15Ni steel plate with no-filler TIG-welding process were carried out. This work was conducted to determine the nature of weld ability in synthesized steel. The bulks were formed in a dimension of 30x20x7 mm3 to ease data retrieval. Results show that the largest residual stress occurred in the weld metal area, amounting to 82.40 MPa with lattice stretching of 0.18%. Conversely, the values decreased to 65.92 MPa and a stretch of 0.14% in the HAZ area. This residual stress is a tensile stress that can reduce the mechanical strength of the material since it …
Personality Trait Based Intervention For Workplace Accident Prevention,
2017
Faculty of Industrial Technology, Institut Teknologi Bandung, Bandung 40132, Indonesia
Personality Trait Based Intervention For Workplace Accident Prevention, Yassierli Yassierli, Nurhayati Nurhayati, Marisa Anatasia, Shamsul Bahri
Makara Journal of Technology
Previous research has suggested that some traits may be useful as the predictors of risk behaviours behaviors. Therefore, personality traits seem to play a role in accident involvement. The purpose of this study is was to explore the relationship between the personality traits based on the Big Five Inventory (BFI) and worker accident experiences in order to elaborate personality traits based intervention for workplace accident prevention. A cross cross-sectional study was conducted among 173 workers in a cement company using a set of questionnaires consisting of respondents’ characteristics, BFI, and self-reported accident experience. The correlations were computed using Goodman Kruskal’s …
Urban Drainage Management And Flood Control Improvement Using The Duflow Case Study: Aur Sub Catchment, Palembang, South Sumatra, Indonesia,
2017
Department of Land and Water Development, Water Science and Engineering, UNESCO IHE, Westvest 7 2611 AX Delft, The Netherlands
Urban Drainage Management And Flood Control Improvement Using The Duflow Case Study: Aur Sub Catchment, Palembang, South Sumatra, Indonesia, Charlotte De Fraiture, Robiyanto Hendro Susanto, F.X. Suryadi, Harrini Mutiara Hapsari Wahyu
Makara Journal of Technology
Urban flooding often times staggers the livelihood in an urban area, which most likely happens in the lowland urban area. Therefore, the existing urban drainage system should be improved in order to tackle the upcoming urban flooding events, which are more than likely to be more devastating than those in the previous years. The research location is in Palembang, Sumatra, Indonesia, where 30% of its urban part is a lowland area. The selected Aur Sub Catchment is located in Silaberanti. The main objective of this research is to improve the current drainage system in order to achieve the optimal design …
Ethanol Purification Using Activated Natural Zeolite,
2017
Department of Chemical Engineering, Universitas Gadjah Mada, Yogyakarta 55281, Indonesia
Ethanol Purification Using Activated Natural Zeolite, Chandra Wahyu Purnomo, Nelliza Putri, Indra Perdana, Hirofumi Hinode
Makara Journal of Technology
Bio ethanol is one of the potential fuels in the future. However, ethanol in water mixture has an azeotropic concentration of 95.6 wt. %, which makes it difficult to purify further. The common method of purification is by using an azeotropic distillation column, which requires an intensive energy and an addition of specific solvent. In this study, ethanol purification is done using an adsorption column packed with zeolite Raschig rings. The natural zeolite ring was modified beforehand using the NaOH solution to enhance the material’s water adsorption performance. The ethanol purity can reach more than 99% with the modified zeolite …
