Materials Science and Engineering Commons^™

The Effect Of Artificial Defects On The Fatigue Characteristics Of Aisi 4340 Steel, Yakov B. Unigovski, Dmitry Fishman, Liat Fishman, Liron Shichman, Ofir Moshe, Roni Shneck, Emmanuel Gutman

Journal of Metals, Materials and Minerals

This study examined the fatigue life (Nf) and fatigue limit (FL) of AISI 4340 steel in relation to surface roughness, artificial defects and shot peening. Artificial surface defects on fatigue specimens were obtained by electrical discharge machining (EDM) or by pre-corrosion in 3.5% NaCl and perchloric acid solutions, followed by a fatigue test. The presence of artificial defects of various sizes, taken into account by the area  parameter, led to a significant decrease in fatigue characteristics, while shot peening contributed to their noticeable improvement. Defects resulting from electrochemical corrosion had a much greater negative effect on fatigue …

The Enhancement Of Ethanol Gas Sensors Response Based On Calcium And Zinc Co-Doped Lafeo3/Fe2o3 Thick Film Ceramics Utilizing Yarosite Minerals Extraction As Fe2o3 Precursor, Endi Suhendi, Zeany Luckyta Amanda, Muhamad Taufik Ulhakim, Andhy Setiawan, Dani Gustaman Syarif

Journal of Metals, Materials and Minerals

A gas sensor is a renewed interest of research which has been developed to make a device that can be detected the harmful gases and applied in the several fields of industries. In this paper, we report the modified of gas sensor based thick film ceramic LaFeO3/Fe2O3 by added calcium and zinc co-doping prepared by screen-printed technique. In this work, yarosite mineral was utilized as Fe2O3 precursor. It aims to take the advantages of abundance natural resources in Indonesia to save a cost in gas sensor fabrication. Then, x-ray diffraction (XRD), scanning electron microscopy (SEM) and electrical properties characterization were …

Wollastonite And Talc Reinforced Polypropylene Hybrid Composites: Mechanical, Morphological And Thermal Properties, Naruedee Putfak, Amnouy Larpkasemsuk

Journal of Metals, Materials and Minerals

This study focused on evaluating the mechanical, thermal, and morphological properties of polypropylene (PP) hybrid composites containing two different inorganic mineral fillers, namely wollastonite (WO) and talc. The composites were prepared by melt mixing process using a twin screw extruder and an injection molding machine. All composites contained a constant filler loading at 20 wt% with varying WO/talc weight ratios (20/0, 15/5, 10/10, 5/15, and 0/20). Melt flow index (MFI), mechanical properties (impact strength and tensile properties), heat distortion temperature (HDT) fractured surface morphology, and thermal behaviors of the resulting composites were investigated. The results revealed an enhancement in the …

Effect Of Nitrocarburizing And Argon Admixing On Low Carbon Steel For Component Facility In Radiometallurgical Installation, Erwan Hermawan, Suprapto Suprapto, Usman Sudjadi, Siti Shaleha, Maman Kartaman Ajiriyanto

Journal of Metals, Materials and Minerals

Steel is an important component in the industrialized world with rising growth in world consumption. Steel has wide applications due to its high strength, durability, and cost-effectiveness. This has applications in the nuclear power plant. In Indonesian nuclear industry, low carbon steel is used not only for the fabrication of reactor components but also for the radiometallurgical facilities. However, to avoid the risk of premature failure and enhance the longevity of the components in the service condition, surface modification for the improvement of hardness has been realized. Amongst several methods, surface hardening by following nitrocarburizing has been found to be …

Structural, Magnetic And Transport Properties Of Ca And Sr Doped Lanthanum Manganites, Sunita Keshri, Shailendra Rajput, Sonali Biswas, Leena Joshi, Wojciech Suski, Piotr Wiśniewski

Journal of Metals, Materials and Minerals

This article presents a comparative study for the effect of average A-site cation size on the structural, transport and magnetic properties of Lanthanum manganites. Three polycrystalline colossal magneto-resistive compounds were synthesized using standard solid state reaction method. The electrical resistivity data were analyzed employing standard two-phase model to understand the conduction mechanism. The resistance of polycrystalline ceramic depends on the intragrain resistance (intrinsic resistance) and the intergrain or grain-boundary resistance (extrinsic resistance). The substitution of Sr ions at La-site provides higher magnetic and metal-insulator transitions as compared to Ca ions. The combined substitution of Ca and Sr ions at La-site …

Formation Of Nano-Crystalline Chromium-Zirconium Nitride (Cr-Zr-N) Film Coating By Dc Unbalanced Magnetron Sputtering, Kumpon Leelaruedee, Kattareeya Taweesup, Patama Visuttipitukul

Journal of Metals, Materials and Minerals

This research aimed to improve the properties of chromium nitride (CrN) film coatings by addition of zirconium (Zr) as the third element to form Cr-Zr-N ternary nitride. DC unbalanced magnetron sputtering method was used to form Cr-Zr-N film with various Zr/Zr + Cr atomic ratios.  Mechanical properties, surface morphology and crystal structure of the film were investigated. In the research, Cr-Zr-N film were categorised into 3 types with different Zr amount: low zirconium, (Zr/Zr + Cr = 0.29), medium zirconium (Zr/Zr + Cr = 0.44), and high zirconium (Zr/Zr + Cr = 0.74). All Cr-Zr-N films exhibited nano-crystalline structures with …

Controlled Plasma Tuning Of Mos2 Based Photodetector: From Visible To Ultraviolet Photo Response, Huda Musa Mutlaq, Ali Jabbar Fraih

Journal of Metals, Materials and Minerals

Among diverse family of two-dimensional materials, molybdenum disulfide (MoS2) is one of the most promising materials for optical applications thanks to its tunable optical energy bandgap. In this work, a MoS2 based photodetector is fabricated and its optical properties is investigated. With the help of controlled oxygen plasma bombardment, its photoresponse is tuned from visible to ultraviolet region. The photodetector was subjected to three bombardment times of 60 s, 120 s, and 180 s, and it was observed that 180 s irradiation resulted in a change in the optical response range of the photodetector from visible to ultraviolet. In fact, …

Retaining The High-Temperature Phases Of Rb3h(So4)2 And Rb5h3(So4)4 At Room Temperature, Chatr Panithipongwut Kowalski

Journal of Metals, Materials and Minerals

The attempts to maintain the higher-temperature phases of Rb3H(SO4)2 and Rb5H3(SO4)4 were demonstrated in this work for the first time. The goal was to explore the possibility to utilize solid acids at lower temperatures while keeping the high-temperature phases which connects to the desirable conductivities. Enabling to do so will allow the ease of handling and thermal cycling, and the energy saving in fuel cell applications, and will allow researchers to study the high-temperature properties of solid acids at lower temperatures without the expenses for the in-situ measurements and the accessibility limitations. The four relatively simple methods, which were the …

Poly(Vinyl)Alcohol Film Composited With Carbon Dots From Water Hyacinth Stalks Based On Gamma Irradiation For The Uv Blocking Film, Tanagorn Kwamman, Threeraphat Chutimasakul, Panida Sangangam, Nattamon Puengposop, Kanokorn Wechakorn

Journal of Metals, Materials and Minerals

UV-radiation in the range of 200 nm to 400 nm from sunlight can inhibit the photosynthesis process in plants, while visible light in the range of 400 nm to 700 nm promotes photosynthesis and plant growth. In this work, poly(vinyl)alcohol-carbon dots composite film (PVA-CDs film) was developed as a UV-blocking film due to the excellent optical properties of carbon dots and the film-forming properties of PVA. For the synthesis of carbon dots using gamma irradiation, water hyacinth stalk, an invasive aquatic plant, was used as a carbon source. The result showed that PVA-CDs composite film exhibited excellent UV absorption (200 …

Luminescent Properties Of Polyaniline Capped Mn Doped Zns Quantum Dots, Anju Bala, Rajeev Sehrawat, Anil Kumar Sharma, Pardeep Soni

Journal of Metals, Materials and Minerals

Synthesis of polyaniline capped and Mn doped quantum dots are performed with co-precipitation tech. while structural, optical and morphological properties have been carried out by using Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Diffraction (XRD) study, photoluminescent (PL), absorption spectroscopy and High-Resolution Transmission Electron Microscopy (HR-TEM). Particles size is nearly 2 nm calculated using XRD analysis and nearly 2.5 nm as estimated from HR-TEM study. FTIR spectra confirm that ZnS and polyaniline interact through S-H vibrations. The absorption spectra analysis reflects the occurrence of blue shift at the peak of absorption along with the enhanced band gap of polyaniline capped ZnS(Mn) …

Charge Transport, Conductivity And Seebeck Coefficient In Pristine And Tcnq Loaded Preferentially Grown Metal Organic Frameworks, Xin Chen, Kai Zhang, Zeinab Mohammed Hassan, Engelbert Redel, Helmut Baumgart

Electrical & Computer Engineering Faculty Publications

This investigation on Metal-Organic Framework (MOF) HUKUST-1 films focuses on comparing the undoped pristine state and with the case of doping by TCNQ infiltration of the MOF pore structure. We have determined the temperature dependent charge transport and p-type conductivity for HKUST-1 films. Furthermore, the electrical conductivity and the current-voltage characteristics have been characterized in detail. Because the most common forms of MOFs, bulk MOF powders, do not lend themselves easily to electrical characterization investigations, here in this study the electrical measurements were performed on dense, compact surface-anchored metal-organic framework (SURMOF) films. These monolithic, well-defined, and (001) preferentially oriented MOF …

The Critical Role Of Dynamic Surface Tension Of Surfactants On The Impact Dynamics Of Water Droplets, Amir Esmaeili, Reza Mohammadi

Graduate Research Posters

Due to their time-dependent surface tension, the addition of surface-active agents or surfactants to water for specific applications has made controlling the impact dynamics of these droplets a complex phenomenon. This work investigates the influence of the molecular weight, concentration, and ionic nature of the surfactants as well as the substrate surface characteristics on the impact dynamics of surfactant-laden droplets using a high-speed camera at 10000 frames per second. Sodium dodecyl sulfate, hexadecyltrimethylammonium bromide, and n-decanoyl-n-methylglucamine were used as anionic, cationic, and nonionic surfactants, respectively. We used hydrophilic glass slides, hydrophobic polytetrafluoroethylene, and superhydrophobic alkyl ketene dimer (AKD) as substrates. …

Analysis Of Post-Deposition Recrystallization Processing Via Indium Bromide Of Cu(In,Ga)Se2 Thin Films, Deewakar Poudel, Benjamin Belfore, Tasnuva Ashrafee, Shankar Karki, Grace Rajan, Angus Rockett, Sylvain Marsillac

Applied Research Center Publications

Cu(In,Ga)Se₂ (CIGS) thin films were deposited at low temperature (350 °C) and high rate (10 µm/h) by a single stage process. The effect of post-deposition treatments at 400 °C and 500 °C by indium bromide vapor were studied and compared to the effect of a simple annealing under selenium. Structural, electrical, and chemical analyses demonstrate that there is a drastic difference between the different types of annealing, with the ones under indium bromide leading to much larger grains and higher conductivity. These properties are associated with a modification of the elemental profiles, specifically for gallium and sodium.

Biomass-Derived Electrode Materials And Sustainable Processes For Supercapacitors, Katelyn M. Shell

Theses and Dissertations

Biomass is one of the most abundant natural resources and has been used as a source of energy for thousands of years. Biomass as a precursor for energy storage materials is still relatively novel and faces several obstacles before becoming commonly used in today’s electrical devices. Currently, energy storage devices, such as batteries, capacitors, and supercapacitors, utilize petroleum-derived graphitic carbons for anodes, generating a need for more sustainable materials. Biomass, as a carbon-rich source for electrode materials, presents a viable and economically feasible alternative due to the prevalent lignocellulosic compounds: lignin, cellulose, and hemicellulose. Preliminary studies on the solid residues …

Determination Of Hydrogel Degradation By Passive Mechanical Testing, Avery Rosh-Gorsky

Honors Theses

This paper details a new technique to measure the mechanical properties of ETTMP PEGDA hydrogels using Hertz Contact Theory and simultaneously analyze both the model drug release and gel erosion in situ. This method involves curing a drug loaded hydrogel in a standard cuvette and placing a glass bead and phosphate buffer solution (PBS). Over time, the cross-linked network of the hydrogel breaks down, and, as a result, the ball sinks into the hydrogel. This method provides a macroscopic and inexpensive way to continuously and passively measure properties of the hydrogel as the hydrogel degrades. By plotting both the …

Incorporation Of Perlite And Recycled Aggregates For Internal Concrete Curing, Yosra El Maghraby, Mohamed Nagib Abou-Zeid Prof., Mohamed Abdel-Raouf Dr.

Civil Engineering

No abstract provided.

Multi-Level Analysis Of Atomic Layer Deposition Barrier Coatings On Additively Manufactured Plastics For High Vacuum Applications, Nupur Bihari

Dissertations, Master's Theses and Master's Reports

While hardware innovations in micro/nano electronics and photonics are heavily patented, the rise of the open-source movement has significantly shifted focus to the importance of obtaining low-cost, functional and easily modifiable research equipment. This thesis provides a foundation of open source development of equipment to aid in the micro/nano electronics and photonics fields.

First, the massive acceptance of the open source Arduino microcontroller has aided in the development of control systems with a wide variety of uses. Here it is used for the development of an open-source dual axis gimbal system. This system is used to characterize optoelectronic properties of …

Developments Of Advanced Cathodes And Stabilized Zinc Anodes For High-Performance Aqueous Zinc-Ion Batteries, Xiujuan Chen

Graduate Theses, Dissertations, and Problem Reports (ETD)

Aqueous rechargeable zinc-ion batteries (ZIBs) have attracted considerable attention as one of the most promising energy storage systems for the grid-scale application owing to the natural merits of metallic Zn, including a high theoretical capacity, suitable redox potential, low cost, high safety, and eco-friendliness. However, the existing aqueous ZIBs are far from satisfying the requirements of practical applications. Significant challenges hindering the further development of ZIBs come from the low utilization and poor cycling stability of cathodes and limited reversibility of Zn anodes associated with dendrite growth, corrosion, and passivation. To date, enormous efforts have been devoted to developing high-performance …

Static And Dynamic Analysis Of Composite Plates Using The Monna Finite Element, Mohamed Emadeldin Omar Abdelhadi

Graduate Theses, Dissertations, and Problem Reports (ETD)

Composite materials are replacing metals in many fields due to their favorable qualities such as strength-to-weight ratio, fatigue characteristics, and corrosion resistance. An efficient, versatile, and accurate composite plate element applicable to the dynamic analysis of composite plates would help the advancement of composites tremendously.

The objective of this research is to analyze composite plates using the classical laminated plate theory (CLPT), first-order deformation theory (FSDT), and higher-order deformation theory (HSDT) with the applicable finite element modeling (FEM) for each theory. This thesis investigates which theory is more efficient and accurate and evaluates the benefits of using an h-p-version …

Increasing The Seebeck Coefficient Of Thermoelectric Calcium Cobaltite Ceramics Through Incorporation Of Rare-Earth Elements, Andre Fabian Fernandes

Graduate Theses, Dissertations, and Problem Reports (ETD)

The demand for alternative sources of energy continues to grow, so it is essential to look for alternatives that are environmentally sustainable to minimize the environmental impact of energy generation. Projections suggest that renewables have the potential to make up over fifty percent of power generation by 2035. Studies have shown that in 2020 more than 62% of the energy produced in the US was lost, with most of this energy being in the form of waste heat. Waste heat can be utilized to improve the efficiency of power production or even power other devices. This waste heat can be …