Materials Science and Engineering Commons^™

Study Of Methanol And Ethanol Absorption On Vacuum Temperature Of Adsorption Cooling Machine Adsorption Cycle, Jhon Sufriadi Purba, Jandri Fan Ht. Saragi

Journal of Mechanical Engineering Science and Technology (JMEST)

Cooling machines are currently being used more and more in accordance with technological advances and increasing living standards. Common uses are for preserving food, air conditioning, cooling beverages, for making ice cubes, and others. The need for cooling systems in remote areas for various needs such as preservation or storage of food ingredients is felt to be increasing, while the existing conventional cooling systems cannot necessarily be used because not all remote areas have electricity networks, so a simple adsorption cooling system is an alternative for solving problems. A cooling system needs in remote areas like this. The purpose of …

Stochastic Lightning Damage Prediction Of Carbon/Epoxy Composites With Material Uncertainties, S.Z.H. Shah, Juhyeong Lee

Mechanical and Aerospace Engineering Faculty Publications

This study presents a novel stochastic modeling framework predicting lightning thermal damage in carbon/epoxy composites. The stochastic lightning damage model (SLDM) was developed with random distributions of composite’s electrical conductivity and void. The Box-Muller transformation was applied to generate random in-plane and through-thickness electrical conductivities with Gaussian distributions. The SLDM suggested that the predicted lightning thermal damage to carbon/epoxy composites increased slightly with the use of stochastic electrical conductivity, but the presence of voids did not significantly affect the damage development. The predicted size and shape of lightning thermal damage agreed fairly well with experimental results. In addition, the proposed …

Interferometric Lithography- An Approach To Large Area And Cost Effective Nanopatterning, Vineeth Sasidharan

Optical Science and Engineering ETDs

In this dissertation interferometric lithography is approached in two different ways to address two important constraints of nanopatterning. One approach solves the problem of scaling up interferometric lithography to wafer scale (4 inch or larger) area. Through the second approach we have developed a nanopatterning technique based on interferometric lithography by using an inexpensive (~$100) diode laser as source, making interferometric lithography a very cost-effective technique.

Wafer-scale large-area nanopatterning was developed using an amplitude grating mask as a grating beam splitter along with spatial averaging of laser intensity by wobbling. The longitudinal and transverse coherence issues both are eased by …

Growth, Characterization, And Mechanical Testing Of Diamond-Like Carbon Films, Tailei Qi

LSU Master's Theses

The high residual stresses within diamond-like carbon (DLC) films limit its thickness and make the film tend to delaminate from the substrate and be defective on the surface. To address this problem, a new plasma enhanced chemical vapor deposition system (PECVD) was set up to investigate the effects of different film growth parameters on the DLC films, such as chromium doping, gas fluxes, depositing pressures, bias voltages, and depositing times. After the film growth parameters were optimized, this condition was transferred from silicon wafer to SS316 steel plate to deposition of DLC films with some adjustments. Scanning electron microscopy (SEM) …

Surface Engineering Of Materials For Optical And Biomedical Applications, Syed Mohammad Abid Hasan

LSU Doctoral Dissertations

The mechanisms of various optical and medical applications depend on the characteristics of the surface of the material which is being used to detect the molecule of interest. In this work, we focused on some specific areas of surface engineering that play a vital role to improve the performance of some material characteristics. Firstly, we focused on the wettability of graphene, which is important for surface modification and thermal/fluidic properties. The level of transparency to van der Waals forces, chemical bonds, and electrostatic interactions between atoms and molecules on two sides of graphene single layer is not well understood. Our …

Spatial And Temporal Analysis Of Sodium-Ion Batteries, Dewen Hou, Eric Gabriel, Joshua A. Russell, Kincaid Graff, Hui Xiong

Materials Science and Engineering Faculty Publications and Presentations

As a promising alternative to the market-leading lithium-ion batteries, low-cost sodium-ion batteries (SIBs) are attractive for applications such as large-scale electrical energy storage systems. The energy density, cycling life, and rate performance of SIBs are fundamentally dependent on dynamic physiochemical reactions, structural change, and morphological evolution. Therefore, it is essential to holistically understand SIBs reaction processes, degradation mechanisms, and thermal/mechanical behaviors in complex working environments. The recent developments of advanced in situ and operando characterization enable the establishment of the structure–processing–property–performance relationship in SIBs under operating conditions. This Review summarizes significant recent progress in SIBs exploiting in situ and operando …

Degradation Issues And Stabilization Strategies Of Protonic Ceramic Electrolysis Cells For Steam Electrolysis, Hanrui Su, Yun Hang Hu

Michigan Tech Publications, Part 1

Protonic ceramic electrolysis cells (PCECs) are attractive electrochemical de-vices for converting electrical energy to chemicals due to their high conversion efficiency, favorable thermodynamics, fast kinetics, and inexpensive materials. Compared with conventional oxygen ion- conducting solid oxide electrolysis cells, PCECs operate at a lower operating temperature and a favorable operation mode, thus expecting high durability. However, the degradation of PCECs is still significant, hampering their development. In this review, the typical degradations of PCECs are summarized, with emphasis on the chemical stability of the electrolytes and the air electrode materials. Moreover, the degradation mechanism and influencing factors are assessed deeply. Finally, …

Crystal Structure Prediction Of Materials At Extreme Conditions, Ashley S. Williams

USF Tampa Graduate Theses and Dissertations

The prediction of the structure of a crystal given only the constituent elements is one of the greatest challenges in both materials science and computational science alike. If one were to try to predict a novel crystal by brute force, meaning by arranging the atoms in every possible position of the unit cell and optimizing the geometry to find the energy minima of the potential energy surface, the amount of computer resources required to complete the calculation on the timescale of a few years would vastly exceed the currently installed computational capacity of the entire world. Fortunately, several methods have …

The Photophysical Studies Of Transition Metal Polyimines Encapsulated In Metal Organic Frameworks (Mof’S), Jacob M. Mayers

USF Tampa Graduate Theses and Dissertations

Light harvesting systems provide a platform that converts solar energy into other forms of energy. One of the most common examples of photon capturing and conversion into chemical energy is observed in photosynthetic organisms in both Eurkaroyic and Prokaryotic domains. Nature provides a model for successful light harvesting platforms which includes the compartmentalization of antenna complexes that contain separated donor and acceptor pairs that participate in efficient electron transfer processes. In order to mimic such systems, crystalline porous materials that exhibits regular cavities and pore dimensions provides an excellent starting place. Metal organic frameworks (MOFs) are a class of porous …

Explorations And Developments In Multifunctionality, 3d Printing, And Accelerated Aging For Thermoplastics And Thermosets, Zachary Brounstein

Nanoscience and Microsystems ETDs

If the world is to progress through the fourth industrial revolution, rapid advances in materials science must complement new technological feats in manufacturing, computation and device functionality, and a broader understanding of how materials behave as they age and degrade. To this effect, much effort has been directed towards polymeric materials to address and solve many problems in this new era. This includes developing polymer composites that incorporate fillers to imbue multifunctionality, fabricating novel formulations for additive manufacturing, and conducting aging studies to assess the performance of these materials over long time spans. Building and expanding on the latest research …

Improvised Centrifugal Spinning For The Production Of Polystyrene Microfibers From Waste Expanded Polystyrene Foam And Its Potential Application For Oil Adsorption, Marco Laurence M. Budlayan, Jonathan N. Patricio, Jeanne Phyre B. Lagare, Susan D. Arco, Arnold C. Alguno, Antonio M. Basilio, Felmer S. Latayada, Rey Y. Capangpangan

Physics Faculty Publications

A straightforward approach to recycle waste expanded polystyrene (EPS) foam to produce polystyrene (PS) microfibers using the improvised centrifugal spinning technique is demonstrated in this work. A typical benchtop centrifuge was improvised and used as a centrifugal spinning device. The obtained PS microfibers were characterized for their potential application for oil adsorption. Fourier transform infrared spectroscopy results revealed similarity on the transmission bands of EPS foam and PS microfibers suggesting the preservation of the EPS foam’s chemical composition after the centrifugal spinning process. Scanning electron microscopy displayed well-defined fibers with an average diameter of 3.14 ± 0.59 μm. At the …

Nanocrystals Impregnated Porous Article And Method Of Making And Using Same, Michael D. Sherburne

AFIT Patents

The present invention relates to devices for detecting radiation by the excitation of colloidal nanocrystals within a porous article and methods of using same. The aforementioned device is inexpensive and can be fabricated quickly in order to detect radiation. Due to the use of colloidal nanocrystals which have been known to have a decay constant of under 100 ps when energetic electrons produced by an incident x-ray excite the nanocrystals, this device can be used in fast radiation detection of x-rays.

Optically Active Selenium Vacancies In Baga4Se7 Crystals, Brian C. Holloway, Timothy D. Gustafson, Christopher A. Lenyk, Nancy C. Giles, Kevin T. Zawilski, Peter G. Schunemann, Kent L. Averett, Larry E. Halliburton

Faculty Publications

Barium gallium selenide (BaGa₄Se₇) is a recently developed nonlinear optical material with a transmission window extending from 470 nm to 17 μm. A primary application of these crystals is the production of tunable mid-infrared laser beams via optical parametric oscillation. Unintentional point defects, such as selenium vacancies, cation vacancies (barium and/or gallium), and trace amounts of transition-metal ions, are present in BaGa₄Se₇ crystals and may adversely affect device performance. Electron paramagnetic resonance (EPR) and optical absorption are used to identify and characterize these defects. Five distinct EPR spectra, each representing an electron …

Spin Coupling In Magnetic Core - Shell Nanoparticles, Corisa Kons

USF Tampa Graduate Theses and Dissertations

Magnetic nanoparticles (NPs) have garnered much interest due to the unique properties that emergewhen compared to their bulk counterparts. In particular, core-shell (CS) NPs offer the ability to tailor the magnetic properties of the system through careful selection of core and shell constituent materials. In this work, the magnetic ordering of CS NPs with contrast in core/shell features (moment, anisotropy, coercivity, etc.) have been investigated using a combination of X-ray magnetic circular dichroism spectroscopy (XMCD) and polarized small angle neutron scattering (SANS). First, temperature-dependent analyses of XMCD and SANS studies were carried out for CS NPs featuring a core composed …

Entrepreneurially Minded Learning In The Unit Operations Laboratory Through Community Engagement In A Blended Teaching Environment, Erick S. Vasquez, Kelly Bohrer, Abraham Noe-Hays, Arthur Davis, Matthew Dewitt, Michael J. Elsass

Chemical and Materials Engineering Faculty Publications

Online and blended learning opportunities in Chemical Engineering curriculum emerged due to COVID-19. After eight weeks of in-person Unit Operations Laboratory sessions, a remote-learning open-ended final project was assigned to student teams. The assignment involved aspects related to entrepreneurial-minded learning (EML) and community-based learning (CBL). Results show correlations between self-directed learning and the EML framework. Continuous support and involvement of a community partner correlate to students' m

Investigation Of Immobilized Enzymes In Confined Environment Of Mesoporous Host Matrices, Xiaoliang Wang

USF Tampa Graduate Theses and Dissertations

Enzyme immobilization in metal-organic frameworks (MOFs) as a promising strategy, is attracting the interest of scientists from different disciplines with the expansion of MOF’s development. Different from other traditional host materials, their unique strengths of high surface areas, large yet adjustable pore sizes, functionalizable pore walls, and diverse architectures make MOFs an ideal platform to investigate hosted enzymes, which is critical to the industrial and commercial process. In addition to the protective function of MOFs, the extensive roles of MOFs in the enzyme immobilization are being well-explored by making full use of their remarkable properties like well-defined structure, high porosity, …

Fatigue Damage Quantification And Life Estimation With Provision For Microstructure, Arash Pourbagheri Jirandehi

LSU Doctoral Dissertations

This dissertation provides methodologies for the quantification of different forms of fatigue damage by considering the role of microstructure. The laws of thermodynamics in conjunction with Finite Element Method (FEM) are utilized to devise thermodynamically-base frameworks for the estimation of cyclic damage in polycrystalline metals. Accordingly, a microstructure-sensitive platform for fatigue life estimation is introduced. The proposed framework is assessed for 3D printed metallic alloys at room and elevated temperatures. Further, it is used to analyze the fatigue performance difference between additively manufactured Inconel 718 in three print orientations. This research is of fundamental vital interest because it ensures that …

Ultra Low-Cycle Fatigue Behavior Comparison Between Additively Manufactured And Rolled 17-4 Ph (Aisi 630) Stainless Steels, David Gonzalez-Nino, Timothy Strasser, Gary S. Prinz

Civil Engineering Faculty Publications and Presentations

This study investigates the mechanical behavior of additively manufactured (AM) 17-4 PH (AISI 630) stainless steels and compares their behavior to traditionally produced wrought counterparts. The goal of this study is to understand the key parameters influencing AM 17-4 PH steel fatigue life under ULCF conditions and to develop simple predictive models for fatigue-life estimation in AM 17-4 steel components. In this study, both AM and traditionally produced (wrought) material samples are fatigue tested under fully reversed (R = −1) strain controlled (2–4% strain) loading and characterized using micro-hardness, x-ray diffraction, and fractography methods. Results indicate decreased fatigue life for …

Experimental Heat Transfer Investigations Of A Double Pipe U-Tube Heat Exchanger Equipped With Twisted Tape And Cut Twisted Tape Internals, Raj Kumar Nayak Maloth, Glen Cletus Dsouza, Swarna Mayee Patra

Mechanical and Materials Engineering Publications

For several decades, the use of heat exchangers for both heating and cooling applications has been established in industries ranging from process to space heating. Out of the various types of heat exchangers, U-tube heat exchangers are preferred owing to their abilities to handle larger flowrates and their simplicity in construction. U-tube exchangers are often equipped with innards of various forms which facilitate higher heat transfer rates and thermal efficiencies. Although higher heat transfer rates have been established with the addition of internals, there is a lack of coherence on the underlying complex physical phenomena such as heat transfer boundary …

Decarbonizing Rural Residential Buildings In Cold Climates: A Techno-Economic Analysis Of Heating Electrification, Filippo Padovani, Nelson Sommerfeldt, Francesca Longobardi, Joshua M. Pearce

Michigan Tech Publications, Part 1

Given the need for decarbonization of the heating sector and the acute need of a propane replacement in the U.S. Upper Midwest, this study quantifies the techno-economic characteristics of sustainable heating electrification in isolated rural, residential buildings in cold climates without natural gas supply. Archetypal buildings are modeled under four levels of electrification. At each electrification level, a parametric solar photovoltaic (PV) sizing analysis is performed and the total life cycle cost, renewable fraction and greenhouse gas (GHG) emissions are calculated based on the primary energy supply for each building type. Cost optimal solutions are stress-tested with multi-dimensional sensitivity analyses. …