Power and Energy Commons^™

Efficiency Study Of A Hybrid Ac/Dc House, Eunice Dominique Solomon Santiago

Master's Theses

With the proliferation of residential-scale renewable energy sources and DC loads, it has become attractive to use residential DC electrical system that could offer benefits over the legacy residential AC electrical system. The Hybrid AC/DC house provides a sustainable alternative to preexisting residential electrical system by having both AC and DC buses. The DC bus facilitates the connection from DC sources to DC loads, whereas the AC bus interfaces AC sources to AC loads. The study develops the equations to calculate losses based on a model consisting of four main components: Multiple-Input Single-Output (MISO) converter, AC-DC converter, inverter, and DC-DC …

Wideband Parameter Estimation Of Overhead Transmission Lines From Terminal Measurements, Fahad J. Alqahtani

Dissertations

The accurate and efficient determination of electrical parameters of transmission lines is essential when performing computer-aided analyses of power systems, including power-flow, state estimation, short-circuit, transient stability, power quality, and electromagnetic transients.

In this dissertation, a novel technique for wideband parameter estimation of frequency-dependent single-phase, three-phase transposed, and three-phase untransposed overhead lines, is proposed. The proposed technique utilizes terminal measurements of transient voltages and currents and is based on an analytical approach to solve the frequency domain 2-port nodal model of the line for the series impedance and shunt conductance per unit length as a function of the frequency. The …

Fe Nanoparticles Encapsulated In N-Doped Porous Carbon For Efficient Oxygen Reduction In Alkaline Media, Chun-Yan Li, Rui Zhang, Xiao-Jie Ba, Xiao-Le Jiang, Yao-Yue Yang

Journal of Electrochemistry

Rational design and synthesis of non-precious-metal catalyst plays an important role in improving the activity and stability for oxygen reduction reaction (ORR) but remains a major challenge. In this work, we used a facile approach to synthesize iron nanoparticles encapsulated in nitrogen-doped porous carbon materials (Fe@N-C) from functionalized metal-organic frameworks (MOFs, MET-6). Embedding Fe nanoparticles into the carbon skeleton increases the graphitization degree and the proportion of graphitic N as well as promotes the formation of mesopores in the catalyst. The Fe@N-C-30 catalyst showed the excellent ORR activity in alkaline solutions (E₀ = 0.97 V vs. RHE, E_{1/2 …}

P-Doped Ru-Pt Alloy Catalyst Toward High Performance Alkaline Hydrogen Evolution Reaction, Rong-Qin Huang, Wei-Ping Liao, Meng-Xuan Yan, Shi Liu, Yuan-Ming Li, Xiong-Wu Kang

Journal of Electrochemistry

Electrocatalytic water splitting represents grand promise for hydrogen fuel in modern energy equipment, and the design and fabrication of higher performance catalysts are at the central. Herein, we report the sequential phosphorus (P)-doping into ruthenium (Ru) nanoparticles (Ru-P/C) by thermal annealing of Ru nanoparticles in phosphine (PH₃) atmosphere and deposition of extremely low concentration of platinum (Pt) to obtain P-doped Ru-Pt alloy catalyst supported on carbon nanotubes (CNTs), which is denoted as (Ru-P)#Pt/C. The data by X-ray diffraction spectroscopy and transmission electron microscopy show that the Ru nanoparticles existed in the form of hexagonal close-packed (hcp) phase with …

Deep Euteceic Solvents-Assisted Synthesis Of Novel Network Nanostructures For Accelerating Formic Acid Electrooxidation, Jun-Ming Zhang, Xiao-Jie Zhang, Yao Chen, Ying-Jian Fan, You-Jun Fan, Jian-Feng Jia

Journal of Electrochemistry

Deep eutectic solvents (DESs) have been reported as a type of solvent for the controllable synthesis of metal nanostructures. Interestingly, flower-like palladium (Pd) nanoparticles composed of staggered nanosheets and nanospheres are spontaneously transformed into three-dimensional (3D) network nanostructures in choline chloride-urea DESs using ascorbic acid as a reducing agent. Systematic studies have been carried out to explore the formation mechanism, in which DESs itself acts as a solvent and soft template for the formation of 3D flower-like network nanostructures (FNNs). The amounts of hexadecyl trimethyl ammonium bromide and sodium hydroxide also play a crucial role in the anisotropic growth and …

Probabilistic Assessment Of Power Systems Resilience Under Natural Disasters, Enas M. Hegazy, Abdelfattah A. Eladl, Magdi M. El-Saadawi

Mansoura Engineering Journal

Extreme weather can have a substantial influence on a power system's operational resilience since they are high-impact, low-probability (HILP) events. Therefore, Power systems must be resilient to HILP incidents in addition to being reliable against widely spread and credible threats. Despite the rarity of such events, the severity of their potential impact necessitates the development of appropriate resilience assessment tools to capture their implications and enhance the resilience of energy infrastructure systems. In this paper, a probabilistic strategy is proposed to assess and evaluate the operational resilience of power distribution networks against the impacts of HILP events depending on value-at-risk …

Learning–Assisted Constraint Filtering To Enhance Power System Optimization Performance, Fouad Hasan

LSU Doctoral Dissertations

Machine learning (ML) is a powerful tool that provides meaningful insights for operators to make fast and efficient decisions by analyzing data from power systems. ML techniques have great potential to assist in solving optimization problems within a shorter time frame and with less computational burden. AC optimal power flow (ACOPF), dynamic economic dispatch (D-ED), and security-constrained unit commitment (SCUC) are the three energy management optimization functions studied in this dissertation. ACOPF is solved every 5~15 minutes. Because of the nonconvex and complex nature of ACOPF, solving this problem for large systems is computationally expensive and time-consuming. Classification and regression …

Clean Energy At The Crossroads Of America: An Integrated Resource Plan For Northern Indiana Public Service Company, Llc (Nipsco), Saad Z. Khan, Shend Boshnjaku

Master's Projects and Capstones

This paper outlines an Integrated Resource Plan (IRP) for the Indiana electric utility company, NIPSCO, looking forward to the year 2050 and evaluating different pathways to net zero emissions from the power generation sector. It is a plan for the future, identifying the most cost-effective and reliable mix of resources to meet the energy needs of NIPSCO's customers and reaching decarbonization goals by mid-century.

Reinforcement Learning-Based Resilience And Decision Making In Cyber-Physical Systems, Fisayo Sangoleye

Electrical and Computer Engineering ETDs

Cyber-physical systems (CPS) transform how humans interact with technology by integrating sensing, computation, networking, and control with physical processes to facilitate smart services and innovative applications in our environments. Recent advances in CPS have led to rapid growth in the amount of information constantly generated by people, systems, and processes. Most of this information, however, is underutilized due to the lack of efficient information utilization and decision-making techniques. Also, the increasing interconnectivity of CPSs presents security risks that, if left unaddressed, could be highly disruptive to systems, processes, and economies. In this dissertation, we present a study and proposal of …

Designing The Power System Of A Robot, Nolan Hays

Honors College Theses

This thesis outlines the acquired skills and knowledge acquired through the course of four years of Murray State University’s School of Engineering. The capstone for students in the department was to team up and complete an interdisciplinary senior design project using skills from various tracks of engineering. For this thesis, there is a greater emphasis on the electrical engineering track. The objective of the project was to build an autonomous robot to complete the various tasks within the scope of the IEEE SoutheastCon 2023 Hardware Competition. The robot was controlled via a Raspberry Pi 4 Model B. There were three …

Rebuilding Grid Governance, Joel B. Eisen, Heather E. Payne

BYU Law Review

As climate change sharpens the focus on our electricity systems, there is widespread agreement that the institutions that govern our electric grid must change to realize a clean energy future in the timescale necessary. Scholars are actively debating how grid governance needs to change, but in this Article we demonstrate that current proposals are insufficient because they do not contemplate “rebuilding.” This Article defines “rebuilding” as ending entities tasked with grid governance and creating new ones to take their place. We propose what no one else has: an overarching framework for rebuilding any grid governance institutions.

This Article discusses when …

Mitigating Adverse Impacts Of Increased Electric Vehicle Charging On Distribution Transformers, Akansha Jain

Theses and Dissertations

There is a growing interest in electric transportation, and the number of electric vehicles (EVs) is increasing. The resulting increase in EV charging power demand has an adverse impact on the existing power grids, especially the distribution transformers. The repeated and continued overloading caused by EV charging can significantly reduce their operational life. This dissertation aims to comprehensively study the adverse impacts of EV charging on distribution transformers and provide robust and practical solutions to mitigate it. A typical North American secondary distribution system with different EV penetration levels and four realistic residential EV charging scenarios are used for the …

Design Of High-Power Ultra-High-Speed Permanent Magnet Machine, Md Khurshedul Islam

Theses and Dissertations

The demand for ultra-high-speed machines (UHSM) is rapidly growing in high-tech industries due to their attractive features. A-mechanically-based-antenna (AMEBA) system is another emerging application of UHSM. It enables portable wireless communication in the radio frequency (RF)-denied environment, which was not possible until recently. The AMEBA system requires a high-power (HP) UHSM for its effective communication performance. However, at the expected rotational speed range of 0.5 to 1 million rpm, the power level of UHSM is limited, and no research effort has succeeded to improve the power level of UHSM.

The design of HP-UHSM is highly iterative, and …

Relaxing Dc Capacitor Voltage Of Power Electronic Converters To Enhance Their Stability Margins, Ali Zakerian

Theses and Dissertations

Recently, due to the increasing adoption of distributed energy resource (DER) technologies including battery energy storage (BES) and electric vehicle (EV) systems, bidirectional power converters are becoming more popular. These converters are broadly utilized as interface devices and provide a bidirectional power flow in applications where the primary power supply can both supply and receive energy. A dc capacitor, called the dc-link, is an important component of such bidirectional converters. For a wide range of applications, the converter is required to control the dc-link voltage. Commonly, a proportional-integrating (PI) controller is used by the dc capacitor voltage controller to generate …

Universal Short-Circuit And Open-Circuit Fault Detection For An Inverter, Buck Brown

All Theses

Short-circuit and open-circuit faults of an inverter’s power device often lead to catastrophic failure of the entire system if not detected and acted upon within a few microseconds, particularly for emerging wide bandgap (WGB) power semiconductors. While a significant amount of research has been done on the fast and accurate protection and detection of short-circuit faults, there has been less success corresponding to the research on open-circuit faults. Common downfalls include protection and detection that are too application-specific, take longer than a couple of microseconds, and are not cost-efficient. This study proposes a new open-circuit fault protection and detection system …

Torque And Power Capabilities Of Coreless Axial Flux Machines With Surface Pms And Halbach Array Rotors, Yaser Chulaee, Donovin Lewis, Matin Vatani, John F. Eastham, Dan Ionel

Power and Energy Institute of Kentucky Faculty Publications

This paper investigates employing a Halbach PM rotor array to increase torque and power density within coreless axial flux permanent magnet (AFPM) machines. Analytical and 2/3-dimensional finite element analysis (FEA) methods are developed to study torque and power capabilities within an example double-rotor, single-stator coreless AFPM machine with a PCB stator. Compared to a surface PM topology of the same mass and volume, employing a Halbach array increases torque density by as much as 30% through increased airgap flux density amplitude. Multiple parametric studies are performed to explore methods of increasing torque and power density while employing Halbach arrays combined …

Design Optimization Of A Direct-Drive Wind Generator With Non-Rare-Earth Pm Flux Intensifying Stator And Reluctance Rotor, Ali Mohammadi, Oluwaseun A. Badewa, Yaser Chulaee, Dan Ionel, Somasundaram Essakiappan, Madhav Manjrekar

Power and Energy Institute of Kentucky Faculty Publications

This paper presents a multi-objective design optimization for a novel direct-drive wind turbine generator. The proposed electric machine topology employs an outer rotor of the reluctance type and a special modular stator including three phase-windings and spoke-type permanent magnets (PMs). Each stator module includes a single coil toroidally wound around the ferromagnetic core. Consecutive stator modules are separated by PMs and include coils belonging to a different phase. An optimization method with three objectives: total power loss, weight, and torque ripple, and with one constraint for a minimum acceptable value for the power factor, is described. The design examples are …

Control And Design Of A Passive Solar Lumber Drying Kiln, Peter Chardavoyne

Honors Scholar Theses

The passive solar lumber drying kiln design, developed by EE Senior Design Team 2317 is presented, tested, and discussed. The design incorporates solar power and a custom control system to dry 12’ lumber boards inside a shipping container much faster than air-drying methods, which can take up to a year for thorough drying, though this can be extended due to the unpredictability of weather events and conditions. This work presents the design as in the final report provided by the team, but provides a more detailed explanation and analysis of the microcontroller system, testing methods and outcomes, alternate solutions and …

Considerations Of The Impacts And System-Level Mitigation Of Electric Vehicle Charging On The Integrated Resource Planning Process, Grant Wollam

All Theses

Electric vehicles (EV) are growing in popularity and therefore adoption rate. Best estimates predict a 6.2% EV adoption rate by 2035 in the southeastern United States. With this level of EV adoption, utility planners must begin to consider the impact that EVs will have on the power grid. This paper aims to help predict these EV impacts on the power grid. Specifically, an urban-commercial feeder is analyzed in detail to provide worst-case and most-likely results of varying levels of EV impact. Results show that a 26.2% peak increase is the most likely result for this feeder in 2035.

Mitigation techniques …

Simulating Dielectric Barrier Plasma Actuators With Varying Geometries, Cass Wiederkehr

Mechanical Engineering Undergraduate Honors Theses

The idea of Ionic Wind Propulsion has long been a topic of research for whether or not it can be used as a practical power source for flight. MIT researchers proved in 2018 that a plane with zero moving parts powered by Ionic Wind Propulsion was possible, and sustained flight could work with an internal power supply. However, due to the thin wire electrodes required to generate the ion cloud that made such propulsion possible, large amounts of drag rendered the plane extremely inefficient and impractical. Dielectric Barrier Discharge Devices (DBDs) are being investigated as to whether they can serve …