Power and Energy Commons^™

Streamer Discharge Modeling For Plasma-Assisted Combustion, Stuart Reyes, Shirshak Kumar Dhali

Electrical & Computer Engineering Faculty Publications

Some of the popular and successful atmospheric pressure fuel/air plasma-assisted combustion methods use repetitive ns pulsed discharges and dielectric-barrier discharges. The transient phase in such discharges is dominated by transport under strong space charge from ionization fronts, which is best characterized by the streamer model. The role of the nonthermal plasma in such discharges is to produce radicals, which accelerates the chemical conversion reaction leading to temperature rise and ignition. Therefore, the characterization of the streamer and its energy partitioning is essential to develop a predictive model. We examine the important characteristics of streamers that influence combustion and develop some …

Advances In Battery Modeling And Management Systems: A Comprehensive Review Of Techniques, Challenges, And Future Perspectives, Seyed Saeed Madani, Yasmin Shabeer, Ananthu Shibu Nair, Michael Fowler, Satyam Panchal, Carlos Ziebert, Hicham Chaoui, Shi Xue Dou, Khay See, Saad Mekhilef, Françios Allard

Electrical & Computer Engineering Faculty Publications

Energy storage systems (ESSs) and electric vehicle (EV) batteries depend on battery management systems (BMSs) for their longevity, safety, and effectiveness. Battery modeling is crucial to the operation of BMSs, as it enhances temperature control, fault detection, and state estimation, thereby maximizing efficiency and preventing malfunctions. This paper thoroughly examines the most recent advancements in battery and BMS modeling, including data-driven, thermal, and electrochemical methods. Advanced modeling approaches are explored, including physics-based models that incorporate mechanical stress and aging effects, as well as artificial intelligence (AI)-driven state estimation. New technologies that facilitate data-driven decision-making, real-time monitoring, and simplified systems include …

A High Step-Up Soft-Switched Converter Based On Coupled Inductor And Current-Fed Voltage Multiplier, Koosha Choobdari Omran, Reza Beiranvand, Pourya Shamsi

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a novel non-isolated DC-DC converter that combines coupled inductor (CI) and voltage multiplier (VM) techniques is proposed. The leakage energy of the CI is effectively recycled, and soft-switching conditions are achieved for all switches and diodes. Resonance between the leakage inductor of the CI and VM capacitors provides soft-switching conditions, without requiring a separate resonant tank. The use of VM stages not only lowers the voltage stress on semiconductor components but also allows for the use of low-voltage-rated devices, leading to reduced conduction losses, lower cost, and improved efficiency. High voltage gain can be achieved by appropriately …

Structural Analysis Of Multi-Domain Dynamic Systems Modeled Via Bond Graphs, Arnold A. Fernandes, Jonathan W. Kimball

Electrical and Computer Engineering Faculty Research & Creative Works

Structural Observability (SO) and Structural Monitorability (SM) are structural properties utilized to determine the state and fault-free operation of components, respectively, in a bond graph (BG) model. BGs enable qualitative system analysis, evaluating whether existing sets of sensors and actuators ensure Structural Observability (SO) and Structural Controllability (SC) without knowledge of parametric values. Furthermore, the analysis determines whether there are sufficient sensors available to identify component faults accurately. This work provides a framework for automated sensor placement in a multi-domain physical system while analyzing the SO and SM properties. The MATLAB Structural Analysis Toolbox (MATSAT) conducts sensor placement in a …

Analytical Model Of The Ac-Ac Dab Converter In The Egam Framework, Arnold A. Fernandes, Kartikeya Jayadurga Prasad Veeramraju, Jonathan W. Kimball

Electrical and Computer Engineering Faculty Research & Creative Works

This paper develops an analytical model of the bidirectional AC-AC Dual Active Bridge (DAB) converter. The passive components of the AC-AC DAB are subject to grid, switching, and sideband harmonics. Thus, it is impossible to model via the conventional Generalized Average Method (GAM). It has been numerically shown that Extended GAM (EGAM) can be used to model the AC-AC DAB converter. In this paper, an analytical sixteenth order EGAM-model has been developed that considers only grid harmonics at the filter components and only sideband harmonics for the transformer leakage inductor. A closed-form expression is developed for the 2D convolution product. …

Active And Reactive Power Flow Control Of The Dual Active Bridge Converter, Lauryn Morris, Thomas W. Francois, Jonathan Saelens, Oroghene Oboreh-Snapps, Arnold Fernandes, Praneeth Uddarraju, Sophia A. Strathman, Jonathan W. Kimball

Electrical and Computer Engineering Faculty Research & Creative Works

The Dual Active Bridge (DAB) is a reliable and efficient converter capable of providing bi-directional power transfer and galvanic isolation. An ac-ac DAB can control both active and reactive power flow. The present work introduces a combined feedback/feed-forward current control system, utilizing the calculated and measured converter currents translated into the dq reference frame, to control the output power. The system was simulated in PLECS to demonstrate the control algorithm's ability to track the dq currents and provide the necessary output power.

Solar Energy Prediction Using Advanced Hybrid Machine Learning Models, Jelawi A. Alqhtani

UNF Graduate Theses and Dissertations

Accurate short-term forecasting of solar power generation is critical for the reliable and cost-effective operation of renewable-based microgrids, where sudden weather-induced variability can compromise grid stability, battery scheduling, and energy trading decisions. Traditional physical and statistical models struggle to capture the complex non-linear relationships and localized weather effects, while individual deep learning architectures often exhibit systematic biases such as chronic under-prediction of peak generation. This thesis proposes a novel Cross-Feedback Ensemble framework that combines the complementary strengths of Long Short-Term Memory (LSTM), Gated Recurrent Unit (GRU), and one-dimensional Convolutional Neural Network (1D-CNN) models through an iterative cross-feedback mechanism and a …

An Extendable Soft-Switched Step-Up Interleaved Converter Integrated With Voltage Multiplier Cells, Amir Hasan Babanezhad, Koosha Choobdari Omran, Reza Beiranvand, Pourya Shamsi

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a multiphase high step-up interleaved converter is introduced, which ensures low-input current ripple, low-component currents, and voltage stresses. The proposed circuit guarantees ZVS operation for power switches and ZCS operation for power diodes, which significantly reduce converter switching losses and EMI emission and improve its efficiency. Therefore, its passive components volume can be reduced by using high switching frequencies. In addition, the interleaved technique reduces input current ripple and input filter volume and provides high-power density. High-voltage gain and low-voltage stresses on the components are also achieved due to the integration of the converter structure with the …

Laser-Induced Graphene For Early Disease Detection: A Review, Sri Ramulu Torati, Gymama Slaughter

Center for Bioelectronics Publications

Electrochemical biosensors have been instrumental in early disease detection, facilitating effective monitoring and treatment. The emergence of graphene has significantly advanced sensor technology in various fields, including biomedicine, electronics, and energy. In this landscape, laser‐induced graphene (LIG) has emerged as a superior alternative to conventional graphene synthesis methods. Its straightforward fabrication process and compatibility with wearable devices boost its practicality and potential for real‐world applications. This review highlights the transformative potential of LIG in biosensing, showcasing its contributions to the development of next‐generation diagnostic tools for early disease detection. An overview of the LIG synthesis process and its applications in …

Fabrication Of Thylakoid Membrane-Based Photo-Bioelectrochemical Bioanode For Self-Powered Light-Driven Electronics, Amit Sarode, Gymama Slaughter

Center for Bioelectronics Publications

The transition toward sustainable and decentralized energy solutions necessitates the development of innovative bioelectronic systems capable of harvesting and converting renewable energy. Here, we present a novel photo-bioelectrochemical fuel cell architecture based on a biohybrid anode integrating laser-induced graphene (LIG), poly(3,4-ethylenedioxythiophene) (PEDOT), and isolated thylakoid membranes. LIG provided a porous, conductive scaffold, while PEDOT enhanced electrode compatibility, electrical conductivity, and operational stability. Compared to MXene-based systems that involve complex, multi-step synthesis, PEDOT offers a cost-effective and scalable alternative for bioelectrode fabrication. Thylakoid membranes were immobilized onto the PEDOT-modified LIG surface to enable light-driven electron generation. Electrochemical characterization revealed enhanced redox …

Method For Calculating Characteristic Frequency Ab (Rechargeable Batteries), Alisher Ganisher Ugli Bozorov

Technical science and innovation

A method for calculating the characteristic frequency is proposed, based on automatic interpolation of the frequency dependence of the reactance and subsequent calculation of the characteristic frequency as one of the roots of the interpolation function. The developed algorithm allows you to calculate the characteristic frequency from only 4 points of the frequency dependence of the reactance. In this case, the error in calculating the resonant frequency parameter does not exceed ~2 Hz.

Obviously, the values of the coefficients of the equation depend on the number of resistance values X and the corresponding frequencies of the test signal. The indicated …

Determination Of Techno-Economic Indicators Of Pumped Storage Power Plants Under The Operational Conditions Of The Tuyamuyun Hydro Complex, Kurbon Salikhdjanovich Dzhuraev, Abdurauf Abduaziz Uulu, Fotima Tulkunovna Shadibekova

Technical science and innovation

The article presents the results of research on the analysis of the state of the electric power system of the Republic of Uzbekistan, taking into account the operating modes of hydraulic and thermal power plants with the study of the sharp-peak nature of the electric load in the winter and summer periods of the year and the problems of covering daily load schedules due to a lack of maneuverable capacities. The use of pumped storage power plants is proposed to cover and smooth daily load schedules across months and seasons. The necessity of utilizing the capacity of pumped storage power …

Electrochemical-Method-Induced Strong Metal-Support Interaction In Pt-Cnt@Sno2 For Co-Tolerant Hydrogen Oxidation Reaction, Shen-Zhou Li, Zi-Jie Lin, Qi-An Chen, Zhao Cai, Qing Li

Journal of Electrochemistry

Inducing the classic strong metal-support interaction (SMSI) is an effective approach to enhance the performance of supported metal catalysts by encapsulating the metal nanoparticles (NPs) with supports. Conventional thermal reduction method for inducing SMSI processes is often accompanied by undesirable structural evolution of metal NPs. In this study, a mild electrochemical method has been developed as a new approach to induce SMSI, using the cable structured core@shell CNT@SnO₂ loaded Pt NPs as a proof of concept. The induced SnO_x encapsulation layer on the surface of Pt NPs can protect Pt NPs from the poisoned of CO impurity in …

Dendrite-Free Strategies For Aqueous Zinc-Ion Batteries: Structure, Electrolyte, And Separator, Gang Wu, Wu-Hai Yang, Yang Yang, Hui-Jun Yang

Journal of Electrochemistry

Continued growth in energy demand and increased environmental pollution constitute major challenges that need to be addressed urgently. The development and utilization of renewable, sustainable, and clean energy sources, such as wind and solar, are crucial. However, the instability of these intermittent energy sources makes the need for energy storage systems increasingly urgent. Aqueous zinc-ion batteries (AZIBs) have received widespread attention due to their unique advantages, such as high energy density, cost-effectiveness, environmental friendliness, and safety. However, AZIBs face significant challenges, mainly the formation of zinc dendrites that seriously affect the stability and lifetime of the batteries, leading to battery …

All-Solid-State Sodium-Ion Batteries: A Leading Contender In The Next-Generation Battery Race, Rui-Jie Zhu, Ze-Chen Li, Wei Zhang, Akira Nasu, Hiroaki Kobayashi, Masaki Matsui

Journal of Electrochemistry

All-solid-state lithium-ion batteries (LIBs) using ceramic electrolytes are considered the ideal form of rechargeable batteries due to their high energy density and safety. However, in the pursuit of all-solid-state LIBs, the issue of lithium resource availability is selectively overlooked. Considering that the amount of lithium required for all-solid-state LIBs is not sustainable with current lithium resources, another system that also offers the dual advantages of high energy density and safety— all-solid-state sodium-ion batteries (SIBs) —holds significant sustainable advantages and is likely to be the strong contender in the competition for developing next-generation high-energy-density batteries. This article briefly introduces the research …

Contributions To Journal Of Electrochemistry, The Flagship Journal Of Chinese Chemical Society Electrochemical Committee, Will Be Listed As A New Recommendation Policy For China Youth Awards Of Electrochemist, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Design, Control, And Evaluation Of A Photovoltaic Snow Removal Strategy Based On A Bidirectional Dc-Dc Converter For Photovoltaic–Electric Vehicle Application, Salma Elakkad, Mohamed Hesham, Hany Ayad Bastawrous, Peter Makeen

Electrical Engineering

A novel self-heating technique is proposed to clear snow from photovoltaic panels as a solution to the issue of winter snow accumulation in photovoltaic (PV) power plants. This approach aims to address the shortcomings of existing methods. It reduces PV cell wear, resource loss, and safety risks, without the need for additional devices. A self-heating current is applied to the solar panel to melt the snow covering its surface, which is then allowed to slide off the panel due to gravity. The proposed system consists of a bidirectional DC-DC converter, which removes the snow cover by heating the solar PV …

Artificial Intelligence Computational Techniques Of Flywheel Energy Storage Systems Integrated With Green Energy: A Comprehensive Review, Abdelmonem Draz, Hossam Ashraf, Peter Makeen

Electrical Engineering

In recent years, the operation of the electric power grid has become more efficient and resilient due to the integration of renewable energy sources (RESs). Solar and wind energy are being incorporated aggressively into the main grid, while other RESs like biomass and geothermal energy are also on the rise. However, the intermittent nature of these RESs necessitates the use of energy storage devices (ESDs) as a backup for electricity generation such as batteries, supercapacitors, and flywheel energy storage systems (FESS). This paper provides a thorough review of the standardization, market applications, and grid integration of FESS. It examines the …

Short-Circuit Modeling And Instantaneous Overvoltage Protection Of Renewable Farms, Shah Mohazzem Hossain

All Dissertations

The existing utility grid is experiencing a paradigm shift in electricity generation due to a significant penetration of renewable energy sources. This shift is primarily driven by the large-scale integration of solar and wind energy farms, particularly in the transmission network, where these farms are typically accompanied by battery energy storage in a hybrid configuration to overcome source intermittency and improve reliability. Such renewable farms comprise numerous inverters, pad-mounted transformers, collector feeders, and dc-side components depending on the generation-source type. Additionally, inverters within these farms exhibit distinct operating modes, such as `grid-following'(GFL) and `grid-forming'(GFM), as well as fault control modes, …

Hardware Applications Of High-Speed Fault Detection Algorithms, Daniel Zintsmaster

All Theses

The growing need for a sustainable electric energy infrastructure has driven research into control, protection, and optimization of power systems. A key challenge is that the changing grid must operate at increasingly higher speeds, but many current hardware devices cannot meet these demands. This thesis focuses on power system protection, aiming to design a hardware solution that can detect and isolate faults in microseconds, ensuring faster, more reliable grid operations. The first hardware developed was for a low-voltage direct current (LVdc) microgrid, which faces challenges due to a lack of protection schemes and novel speed requirements. This thesis presents protection …