Electromagnetics and Photonics Commons^™

Linear Ring Resonator Modulator For Microwave Photonic Links, Arash Hosseinzadeh

Dissertations, Master's Theses and Master's Reports

Modulators within Microwave photonic links (MPLs) encode Radio Frequency (RF) signal information to the optical domain for transmission in applications such as wireless access networks and antenna remoting exploiting advantages optical fiber offers over RF coaxial cables including bandwidth, loss, size, weight, and immunity to electromagnetic interference. A critical figure-of-merit in MPLs is spur-free-dynamic-range (SFDR) defining the range of RF signal power a MPL transmits without distortion. Current Mach-Zehnder Interference (MZI) modulators used in MPLs limit the SFDR because of the associated nonlinear sinusoidal transfer function.

A rigorous theoretical method is developed followed by design, fabrication, and testing to investigate …

Cavity-Coupled Plasmonic Systems For Enhanced Light-Matter Interactions, Abraham Vazquez-Guardado

Electronic Theses and Dissertations

Light-matter interaction is a pivotal effect that involves the synergetic interplay of electromag- netic fields with fundamental particles. In this regard localized surface plasmons (LSP) arise from coherent interaction of the electromagnetic field with the collective oscillation of free electrons in confined sub-wavelength environments. Their most attractive properties are strong field en- hancements at the near field, highly inhomogeneous, peculiar temporal and spatial distributions and unique polarization properties. LSP systems also offer a unique playground for fundamental electromagnetic physics where micro-scale systemic properties can be studied in the macro-scale. These important properties and opportunities are brought up in this work …

Hybrid 3d Printing Demonstrated By Arbitrary 3d Meandering Transmission Lines, Ubaldo Robles

Open Access Theses & Dissertations

This Dissertation focuses on the automation of multi-material direct write three-dimensional (3D) manufacturing of arbitrary metal-dielectric structures. The technology was demonstrated by manufacturing 3D meandering interconnects and transmission lines (TLs). Manufacturing 3D functional electronics with multiple materials required pushing the current state of 3D printing (3DP) technology to utilize simultaneous multi-material processes combined with sophisticated slicing and bonding under one process. Multi material 3DP is known as hybrid 3DP. This research pioneered the process for producing meandering transmission lines, starting with design and manufacturing, using hybrid 3DP through micro-dispensing and fuse deposition modeling. The research starts by 3DP magnetic and …

Magnetotelluric Analysis Of Central Kenya Kenyan Rift Volcanoes For Geothermal Development, Anna Wairimu Mwangi

Open Access Theses & Dissertations

Abstract

High temperature geothermal resources are vast along rift margins because of emplacement of magma in shallow crust. This is the case along the Kenyan Rift valley also known as the Gregory Rift. It is the Eastern arm of the East African rift and a chain of volcanoes along the rift graben characterizes it. We use (MT) magnetotelluric method to image beneath the peralkaline province of the Kenya Rift i.e. Olkaria, Eburru, Badlands, and Longonot volcanoes. The resistivity structure shows active geothermal activity happening at the upper 3km from the subsurface as evidenced by low resistivity cap rock comprised of …

Magneto-Optical Properties Of Thin Permalloy Films: A Study Of The Magneto-Optical Generation Of Light Carrying Angular Momentum, Patrick D. Montgomery

Theses and Dissertations--Electrical and Computer Engineering

Magneto-optical materials such as permalloy can be used to create artificial spin- ice (ASI) lattices with antiferromagnetic ordering. Magneto-optical materials used to create diffraction lattices are known to exhibit magnetic scattering at the half- order Bragg peak while in the ground state. The significant drawbacks of studying the magneto-optical generation of OAM using x-rays are cost, time, and access to proper equipment. In this work, it is shown that the possibility of studying OAM and magneto-optical materials in the spectrum of visible light at or around 2 eV is viable. Using spectroscopic ellipsometry it is possible to detect a change …

High-Order Integral Equation Methods For Quasi-Magnetostatic And Corrosion-Related Field Analysis With Maritime Applications, Robert Pfeiffer

Theses and Dissertations--Electrical and Computer Engineering

This dissertation presents techniques for high-order simulation of electromagnetic fields, particularly for problems involving ships with ferromagnetic hulls and active corrosion-protection systems.

A set of numerically constrained hexahedral basis functions for volume integral equation discretization is presented in a method-of-moments context. Test simulations demonstrate the accuracy achievable with these functions as well as the improvement brought about in system conditioning when compared to other basis sets.

A general method for converting between a locally-corrected Nyström discretization of an integral equation and a method-of-moments discretization is presented next. Several problems involving conducting and magnetic-conducting materials are solved to verify the accuracy …

Thin-Film Lithium Niobate Photonics For Electro-Optics, Nonlinear Optics, And Quantum Optics On Silicon, Ashutosh Rao

Electronic Theses and Dissertations

Ion-sliced thin-film lithium niobate (LN) compact waveguide technology has facilitated the resurgence of integrated photonics based on lithium niobate. These thin-film LN waveguides offer over an order of magnitude improvement in optical confinement, and about two orders of magnitude reduction in waveguide bending radius, compared to conventional LN waveguides. Harnessing the improved confinement, a variety of miniaturized and efficient photonic devices are demonstrated in this work. First, two types of compact electrooptic modulators are presented – microring modulators, and Mach-Zehnder modulators. Next, two distinct approaches to nonlinear optical frequency converters are implemented – periodically poled lithium niobate, and mode shape …

Mode-Locked Laser Based On Large Core Yb3+-Doped Fiber, Fei Jia

Electronic Theses and Dissertations

The thesis reviews principle of laser cavity and gives a general introduction to modelocked laser (MLL). By using Yb3+-doped fiber as gain medium, passive MLL cavity is developed in experiment, aiming to obtain femtosecond pulses with high pump power from 25W to 35W. The gain medium fiber with 65µm core diameter is cleaved with one flat end and another angled. Pump laser with 976nm wavelength is coupled into Yb3+ -doped fiber to excite signal from 1020nm to 1040nm in the core. 9W is threshold for laser setup. After locking all modes, picosecond pulses are output from laser cavity and coupled …

Analysis And Design Of Non-Hermitian Optical Systems, Ali Kazemi Jahromi

Electronic Theses and Dissertations

From a very general perspective, optical devices can be viewed as constructions based on the spatial engineering of the optical index of refraction. Sculpting the real part of the refractive index produces the wide variety of known passive optical devices, such as waveguides, resonators, gratings, among a plethora of other possibilities for managing the transport of light. Less attention has been directed to engineering the imaginary part of the refractive index – that is responsible for optical gain and absorption – in conjunction with the real part of the refractive index. Optical gain is the building block of amplifiers and …

Nonlinear Dynamics In Multimode Optical Fibers, Mohammad Amin Eftekhar

Electronic Theses and Dissertations

Multimode optical fibers have recently reemerged as a viable platform for addressing a number of long-standing issues associated with information bandwidth requirements and power-handling capabilities. The complex nature of heavily multimoded systems can be effectively exploited to observe altogether novel physical effects arising from spatiotemporal and intermodal linear and nonlinear processes. Here, we have studied nonlinear dynamics in multimode optical fibers (MMFs) in both the normal and anomalous dispersion regimes. In the anomalous dispersion regime, the nonlinearity leads to a formation of spatiotemporal 3-D solitons. Unlike in single-mode fibers, these solitons are not unique and their properties can be modified …

Single Mode Wavelength-Tunable Thulium Fiber, Dong Jin Shin

Electronic Theses and Dissertations

Thulium fiber lasers have the broadest emission wavelength bandwidth out of any rare-earth doped fiber lasers. The emission wavelength starts from 1.75μm and ends at around 2.15μm, covering a vast swath of the eye safe wavelength region and intersecting with a large portion of mid-infrared atmospheric transmission window. Also, thulium fiber lasers provide the highest average output power of any other rare-earth doped fiber lasers in these wavelength regimes, making them uniquely suited for applications such as remote sensing. At the moment, high power beam propagation of continuous wave laser through the atmosphere in the mid-infrared range is yet to …

2 Micron Fiber Lasers: Power Scaling Concepts And Limitations, Alex Sincore

Electronic Theses and Dissertations

Thulium- and holmium-doped fiber lasers (TDF and HDF) emitting at 2 micron offer unique benefits and applications compared to common ytterbium-doped 1 micron lasers. This dissertation details the concepts, limitations, design, and performance of four 2 micron fiber laser systems. While these lasers were developed for various end-uses, they also provide further insight into two major power scaling limitations. The first limitation is optical nonlinearities: specifically stimulated Brillouin scattering (SBS) and modulation instability (MI). The second limitation is thermal failure due to inefficient pump conversion. First, a 21.5 W single-frequency, single-mode laser with adjustable output from continuous-wave to nanosecond pulses …

Coexistence And Secure Communication In Wireless Networks, Saygin Bakşi

Electrical & Computer Engineering Theses & Dissertations

In a wireless system, transmitted electromagnetic waves can propagate in all directions and can be received by other users in the system. The signals received by unintended receivers pose two problems; increased interference causing lower system throughput or successful decoding of the information which removes secrecy of the communication. Radio frequency spectrum is a scarce resource and it is allocated by technologies already in use. As a result, many communication systems use the spectrum opportunistically whenever it is available in cognitive radio setting or use unlicensed bands. Hence, efficient use of spectrum by sharing users is crucial to increase maximize …

Coupling Radio Frequency Energy Via The Embedded Rebar Cage In A Reinforced Concrete Structure For The Purpose Of Concrete Degradation Sensing, Ryan Campiz

UNF Graduate Theses and Dissertations

This study focuses on utilizing an energy harvesting system in which a dedicated Radio Frequency (RF) power source transmits RF power via rebar in a reinforced concrete column. The RF power is received and decoupled by a receiver, and is then rectified, boosted, and stored as electrical energy in a supercapacitor, later to be used to make measurements, process data, and communicate to the source via rebar. Two design attempts are presented in this study: (a) one uses single line conduction at 2.4 GHz for RF power transfer; (b) the other uses a more conventional two-line conduction at 8.0 kHz …

Controlling Light With Metadevices, Xu Zhang

Dissertations, Master's Theses and Master's Reports

The development of metamaterials provides a new way to manipulate electromagnetic waves by sub-wavelength artificial structures, and hence brings new properties and functionalities that cannot be found with conventional materials. This leads to the possibility of previously unthought-of applications, including perfect lenses, invisibility cloaks, and perfect absorbers. However, several critical challenges need to be addressed before transiting from intriguing scientific findings to real-world usable devices.

This dissertation deals with two challenges regarding the practical use of metamaterials. Firstly, fabrication of truly three-dimensional (3D) and large-scale metamaterials is needed to increase the degrees of freedom of the functionality for device level …

The Silver Lining: A Novel, Inkjet-Printed Mesh Coplanar-Slot Antenna For The Uhf Band, Anastasios C. Karles

Undergraduate Research Posters

The Federal Communications Commission (FCC) is opening up frequencies within the television range (400MHz to 700MHz) of the Ultra High Frequency (UHF) band for use in emerging technologies, such as cognitive radio networks and machine-to-machine communication. In order for manufacturers to produce affordable antennas that can be used in these emerging technologies, inexpensive antennas are required that meet these new spectrum needs. This paper presents a mesh coplanar-slot bowtie patch antenna fabricated using commercially available inkjet-printing technology. Two antennas were fabricated: a 27x21cm copper FR4 antenna with .25mm lines and a 27x21cm silver antenna with 2mm lines fabricated using inkjet-printing. …

Speckle Effects In Target-In-The-Loop Laser Beam Projection Systems, Mikhail Vorontsov

Electro-Optics and Photonics Faculty Publications

In target-in-the-loop laser beam projection scenarios typical of remote sensing, directed energy, and adaptive optics applications, a transmitted laser beam propagates through an optically inhomogeneous medium toward a target, scatters off the target’s rough surface, and returns back to the transceiver plane. Coherent beam scattering off the randomly rough surface results in strong speckle modulation in the transceiver plane. This speckle modulation has been a long-standing challenge that limits performance of remote sensing, active imaging, and adaptive optics techniques. Using physics-based models of laser beam scattering off a randomly rough surface, we show that received speckle-field spatial and temporal characteristics …

Recursive Non-Local Means Filter For Video Denoising, Redha A. Ali, Russell C. Hardie

Electrical and Computer Engineering Faculty Publications

In this paper, we propose a computationally efficient algorithm for video denoising that exploits temporal and spatial redundancy. The proposed method is based on non-local means (NLM). NLM methods have been applied successfully in various image denoising applications. In the single-frame NLM method, each output pixel is formed as a weighted sum of the center pixels of neighboring patches, within a given search window.

The weights are based on the patch intensity vector distances. The process requires computing vector distances for all of the patches in the search window. Direct extension of this method from 2D to 3D, for video …

Generalized Ellipsometry On Complex Nanostructures And Low-Symmetry Materials, Alyssa Mock

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

In this thesis, complex anisotropic materials are investigated and characterized by generalized ellipsometry. In recent years, anisotropic materials have gained considerable interest for novel applications in electronic and optoelectronic devices, mostly due to unique properties that originate from reduced crystal symmetry. Examples include white solid-state lighting devices which have become ubiquitous just recently, and the emergence of high-power, high-voltage electronic transistors and switches in all-electric vehicles. The incorporation of single crystalline material with low crystal symmetry into novel device structures requires reconsideration of existing optical characterization approaches. Here, the generalized ellipsometry concept is extended to include applications for materials with …

Free-Space Measurements Of Dielectrics And Three-Dimensional Periodic Metamaterials, Clifford E. Kintner

Graduate Theses and Dissertations

This thesis presents the free-space measurements of a periodic metamaterial structure. The metamaterial unit cell consists of two dielectric sheets intersecting at 90 degrees. The dielectric is a polyetherimide-based material 0.001” thick. Each sheet has a copper capacitively-loaded loop (CLL) structure on the front and a cut-wire structure on the back. Foam material is used to support the unit cells. The unit cell repeats 40 times in the x-direction, 58 times in the y-direction and 5 times in the z-direction. The sample measures 12” × 12” × 1” in total. We use a free-space broadband system comprised of a pair …