Electrical and Electronics Commons^™

Interference Analysis And Mitigation Of Telemetry (Tm) And 4g Long-Term Evolution (Lte) Systems In Adjacent Spectrum Bands, Juan Francisco Gonzalez

Open Access Theses & Dissertations

Currently, the telecommunications, radio systems, and many other wireless services in the United States are using the spectrum from the 6 kHz to the 300 GHz frequencies. Although it may seem enough for said systems, as more users and devices are being introduced into the market, the spectrum is limiting the faster introduction of these devices and/or systems. The radio frequency spectrum is home to many transmissions, from amateur radio to cellphone applications, which all share similar frequency bands. By sharing, the number of applications can be increased in a single band, but their performance may be affected. Herein, experiments …

Improving Time-Of-Flight And Other Depth Images: Super-Resolution And Denoising Using Variational Methods, Salvador Canales Andrade

Open Access Theses & Dissertations

Depth information is a new important source of perception for machines, which allow them to have a better representation of the surroundings. The depth information provides a more precise map of the location of every object and surfaces in a space of interest in comparison with conventional cameras. Time of flight (ToF) cameras provide one of the techniques to acquire depth maps, however they produce low spatial resolution and noisy maps. This research proposes a framework to enhance and up-scale depth maps by using two different regularization terms: Total Generalized Variation (TGV) and Total Generalized Variation with a Structure Tensor …

Hybrid 3d Printing Demonstrated By Arbitrary 3d Meandering Transmission Lines, Ubaldo Robles

Open Access Theses & Dissertations

This Dissertation focuses on the automation of multi-material direct write three-dimensional (3D) manufacturing of arbitrary metal-dielectric structures. The technology was demonstrated by manufacturing 3D meandering interconnects and transmission lines (TLs). Manufacturing 3D functional electronics with multiple materials required pushing the current state of 3D printing (3DP) technology to utilize simultaneous multi-material processes combined with sophisticated slicing and bonding under one process. Multi material 3DP is known as hybrid 3DP. This research pioneered the process for producing meandering transmission lines, starting with design and manufacturing, using hybrid 3DP through micro-dispensing and fuse deposition modeling. The research starts by 3DP magnetic and …

Assessing Performance Of Detectors Of High Frequency Oscillations In Eeg Signals, Deeksha Seetharama Bhat

Open Access Theses & Dissertations

Attempts to perform epileptic seizure prediction have been made for decades, but there is no solution yet that is generally effective, though some progress in this area has been reported. Interictal epileptic spikes were considered as the only biomarkers of seizure-generating brain tissue until the recent discovery of high-frequency oscillations (HFOs) in electroencephalographic (EEG) signals, with frequency contents in the range from 80 Hz to 800 Hz. HFOs are now considered as biomarkers of epileptogenic tissue and the seizure onset zone. However, there are challenges in the definition and detection of HFO events which complicate this perspective. In studies about …

Core And Uncore Joint Frequency Scaling Strategy, Vaibhav Sundriyal, Masha Sosonkina, Bryce Westheimer, Mark Gordon

Electrical & Computer Engineering Faculty Publications

Energy-proportional computing is one of the foremost constraints in the design of next generation exascale systems. These systems must have a very high FLOP-per-watt ratio to be sustainable, which requires tremendous improvements in power efficiency for modern computing systems. This paper focuses on the processor—as still the biggest contributor to the power usage—by considering both its core and uncore power subsystems. The uncore describes those processor functions that are not handled by the core, such as L3 cache and on-chip interconnect, and contributes significantly to the total system power. The uncore frequency scaling (UFS) capability has been available to the …

Novel Wideband Ebg Structures For Isolation Improvement Between Cosite Antennas, Paul John Czeresko Iii

Theses and Dissertations

As the number of installed antennas increases on a structure, the available real estate to do so without each antenna interfering with the others diminishes. Electromagnetic band gap (EBG) structures are one way to mitigate this cosite interference with compact antenna installations. While a host of EBG structures and types (3-D, planar etc.) have been proposed and studied historically, it has been found that planar EBG structures tend to provide very narrow bandwidths for both antenna design and cosite interference reduction. This research focuses on the design of EBG structures intended to achieve greater than 20 dB of isolation improvement …

Development Of Open Source Software And Hardware Tool-Chains For Novel Electronics, Shane Oberloier

Dissertations, Master's Theses and Master's Reports

3-D printing technologies have become widely adopted and have spurred innovation and efficiency across many markets. A large contributor to the success of 3-D printing are open source, low cost electronics. On-site circuit manufacturing, however, has not become as widely utilized as 3-D printing. This project attempts to address this problem by proposing and demonstrating an open source circuit board milling machine which is inexpensive, easily manufactured, and accurate. In three interdependent sub-projects, this thesis defines a standard method for designing open source hardware, the design of the bespoke circuit mill, and explores an application of the mill for novel …

Femtosecond Laser Micromachining Of Low-Temperature Co-Fired Ceramic And Glass Fiber Reinforced Polymer Printed Circuit Boards Materials, Raif Farkouh

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Low-temperature co-fired ceramic (LTCC), and glass fiber reinforced polymer (GFRP) printed circuit boards (PCBs) are two materials used for the packaging of electronics. The excellent mechanical and electrical properties of LTCC, combined with the ability to embed passive components offer superior radio frequency (RF) performance and device miniaturization for high-frequency applications. Due to its unique properties, LTCC provides superior performance in applications as diverse as military radar, imaging systems, advanced automotive sensing, telecommunications, and satellites. The use of LTCC in these applications has created a demand for the micromachining of holes, channels, and cavities with specific geometries and structures. Likewise, …

Parameter Estimation Technique For Models In Pss/E Using Real-Time Data And Automation, Malavika Vasudevan Menon

LSU New Orleans Theses and Dissertations

The purpose of this thesis is to use automation to create appropriate models in PSS/E with the data from Hardware-in-Loop real-time simulations. With the increase in technology of power electronics, the use of High Voltage Direct Current Technology and Flexible Alternating Current Transmission System devices in the electrical power system have increased tremendously. Static Var Compensators are widely used and it is important to have accurate and reliable models for studies relating to power systems planning and interaction. An automation method is proposed to find the parameters of an SVC model in PSS/E with the data from the Hardware-in- loop …

Harmonics Elimination In Three Phase Cascade H-Bridge Multilevel Inverter Using Virtual Stage Pwm, Amro Quedan

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

The multilevel inverters are one of the great solutions that are proposed to satisfy the demand for high-power application and the significant integration of renewable energy. The conversion process from DC to AC must be done at high efficiency to decrease the energy loss and to ensure the electric grid power quality. The Total Harmonic Distortion (THD) is the most important feature that indicates the efficiency of the conversion process. In this research, due to the advantages of the cascade H-bridge inverter over other topologies, it has been used with the virtual stage PWM technique to investigate two different methods …

Bio-Inspired Multi-Spectral And Polarization Imaging Sensors For Image-Guided Surgery, Nimrod Missael Garcia

McKelvey School of Engineering Graduate Student Theses & Dissertations

Image-guided surgery (IGS) can enhance cancer treatment by decreasing, and ideally eliminating, positive tumor margins and iatrogenic damage to healthy tissue. Current state-of-the-art near-infrared fluorescence imaging systems are bulky, costly, lack sensitivity under surgical illumination, and lack co-registration accuracy between multimodal images. As a result, an overwhelming majority of physicians still rely on their unaided eyes and palpation as the primary sensing modalities to distinguish cancerous from healthy tissue. In my thesis, I have addressed these challenges in IGC by mimicking the visual systems of several animals to construct low power, compact and highly sensitive multi-spectral and color-polarization sensors. I …

Reconstruction Algorithms For Novel Joint Imaging Techniques In Pet, Homayoon Ranjbar

McKelvey School of Engineering Graduate Student Theses & Dissertations

Positron emission tomography (PET) is an important functional in vivo imaging modality with many clinical applications. Its enormously wide range of applications has made both research and industry combine it with other imaging modalities such as X-ray computed tomography (CT) or magnetic resonance imaging (MRI). The general purpose of this work is to study two cases in PET where the goal is to perform image reconstruction jointly on two data types.

The first case is the Beta-Gamma image reconstruction. Positron emitting isotopes, such as ¹¹C, ¹³N, and ¹⁸F, can be used to label molecules, and tracers, such …

Extrinsic And Intrinsic Control Of Integrative Processes In Neural Systems, Anirban Nandi

McKelvey School of Engineering Graduate Student Theses & Dissertations

At the simplest dynamical level, neurons can be understood as integrators. That is, neurons accumulate excitation from afferent neurons until, eventually, a threshold is reached and they produce a spike. Here, we consider the control of integrative processes in neural circuits in two contexts. First, we consider the problem of extrinsic neurocontrol, or modulating the spiking activity of neural circuits using stimulation, as is desired in a wide range of neural engineering applications. From a control-theoretic standpoint, such a problem presents several interesting nuances, including discontinuity in the dynamics due to the spiking process, and the technological limitations associated with …

Universal Signal Conditioning Technique For Fiber Bragg Grating Sensors In Plc And Scada Applications, Gary Allwood, Graham Wild, Steven Hinkley

Research outputs 2014 to 2021

Optical fibre sensors, such as Fibre Bragg Gratings (FBGs), are growing in their utilisation, although very niche in their applications. To enable a more diverse range of end users, expensive application-specific optical fibre interrogation hardware needs to be made compatible with and, ideally, easily incorporated into existing instrumentation and measurement hardware. The Programmable Logic Controller (PLC) is an ideal example of hardware used for data acquisition in many industries. As such, a module that can be connected into an existing PLC slot to collect data from electrically-neutral, EMI-immune and versatile FBG sensors is of significant advantage to the growing optical …

Energy Potentials Of Briquette Produced From Tannery Solid Waste, Olatunde Ajani Oyelaran, Faralu Muhammed Sani, Olawale Monsur Sanusi, Olusegun Balogun, Adeyinka Okeowo Fagbemigun

Makara Journal of Technology

The vast quantity of waste generated from industries is one of the serious outcomes of unplanned development, resulting into quantum of hazardous organic and inorganic waste generating daily. Proper waste management is a challenging issue that must be addressed adequately. This is, therefore, carried out with a view of assessing the energy and combustion quality of tannery solid waste with a view of converting them into briquettes for cooking, heating and small home industries and reducing the menace caused by tannery waste disposal. The results of the experiments showed that the combustion rate ranged between 0.171 and 0.217 g/min, the …

Indonesia’S Municipal Solid Waste 3r And Waste To Energy Programs, Farizal Farizal, Radityo Aji, Amar Rachman, Nasruddin Nasruddin, Teuku Meurah Indra Mahlia

Makara Journal of Technology

Like most cities in the world, population in Indonesia continues to grow every year. Problems that can arise from this are the increasing amount of municipal solid waste (MSW) production and the growing demand for electricity. To deal with the problems, Indonesian government runs 3R (Reduce, Reuse and Recycle) and WTE (Waste to Energy) Programs simultaneously. 3R program aims to reduce the number of waste, while WTE program aims to generate electricity as an alternative energy source. This study aims to find out the optimal proportion of MSW treated through the 3R and WTE programs. For the purpose, a goal …

Adsorption Of Cu(Ii) Ions In Aqueous Solution Onto Limonia Acidissima Shellbased Activated Carbon: Kinetic And Isotherm Studies, Abrar Muslim, Syahiddin Dahlan Said, Gita Suci Hariati, Siti Fajar Karina, Fauzi Muhammad Djuned, Rizka Mulyawan

Makara Journal of Technology

Adsorption of Cu(II) ions from aqueous solution using activated carbon prepared from Limonia acidissima fruit shell (LAFS-AC) was conducted in batch mode experiments at pH 5 (±0.15), 100 rpm and 1 atm. The effects of contact time, initial Cu(II) ions concentration, KOH concentration, and adsorption temperature on Cu(II) ions adsorption capacity were investigated. Fourier Transform Infrared Spectroscopy and Scanning Electron Microscopy analyses were performed to investigate the active site and surface morphology of the LAFS-AC, respectively. The Cu(II) ions adsorption was fitted very well (R2 = 0.94 on average) to the pseudo second-order adsorption kinetic with the adsorption capacity and …

Experimental Study On Automatic Control For Collision Avoidance Of Ships, Daeng Paroka, Muhammad Fahmi Kamil, Andi Haris Muhammad

Makara Journal of Technology

Automatic control system is widely applied to control the ship direction or heading angle in accordance with the decided trajectory. Several methods for improving performance of control system have been developed such as Proportional-Integral-Derivative (PID) control and fuzzy logic based control. Within the last decade, application of automatic control system is not only for ship navigation but also for avoiding collision risk of ships in seaways. This paper discusses the application of automatic control system for avoiding ship collision by free running experiment. Fuzzy logic based control was developed using Mamdani Centroid method to estimate the necessary rudder angle in …

Study On Semiconductor Properties Of Acetylide-Thiourea Fabricated Onto Interdigitated Electrodes (Ides) Platform Towards Application In Gas Sensing Technology, Adibah Izzati Daud, Wan M. Khairul, M. I. N. Isa, Khairul Anuar Abdul Wahid

Makara Journal of Technology

In the past few decades, the unique properties of acetylide and thiourea moieties individually have attracted great attention from researchers in various fields to be developed in numerous applications in advanced materials technology, especially as an active layer in gas sensing devices. The molecular systems of acetylide and thiourea provide a wide range of electronic properties as they possess rigid π-systems in their designated structures. In this study, a derivative of acetylide-thiourea featuring N-(4[4-aminophenyl] ethynyl benzonitrile)-N’-(4-ethyl benzoyl) thiourea (TCN) has been synthesised with the general formula of ArC(O)NHC(S)NHC≡C)Ar adopted the system of D-π-A for the significant development of conductive materials. …

Experimental Study Of The Chimney Height Variation Against Double Pots Biomass Stove Performance, Faisal Faisal, Adi Setiawan, Wusnah Wusnah, Khairil Khairil, Luthfi Luthfi, Mona Fajriana

Makara Journal of Technology

This research aims to get optimal chimneys height of double pots biomass stove. Optimal chimneys height needs to provide best performance of the stove. Experimental study was done by varied the chimney heights. Water boiling test as the standard method was used to obtained stove performance for each chimney height variation. The results showed that best performance stove was the one with 1.65 cm chimney height, with thermal efficiency at 37.66%.