Electrical and Electronics Commons^™

Functional Electrical Stimulation Of Peripheral Nerve Tissue Via Regenerative Sieve Microelectrodes, Matthew Reagan Macewan

McKelvey School of Engineering Graduate Student Theses & Dissertations

Functional electrical stimulation (FES) of peripheral nervous tissue offers a promising method for restoring motor function in patients suffering from complex neurological injuries. However, existing microelectrodes designed to stimulate peripheral nerve are unable to provide the type of stable, selective interface required to achieve near-physiologic control of peripheral motor axons and distal musculature. Regenerative sieve electrodes offer a unique alternative to such devices, achieving a highly stable, selective electrical interface with independent groups of regenerated nerve fibers integrated into the electrode. Yet, the capability of sieve electrodes to functionally recruit regenerated motor axons for the purpose of muscle activation remains …

Digital Enhancement Of Analog Measurement Systems For Temperature Compensation Of Strain Gages, Islombek Karimov

Electrical Engineering Theses

Generally known temperature compensation techniques for strain gages (like the use of a dummy gage or the implementation of half- and full-bridge configurations) are not applicable to all strain-measurement situations and cannot fully compensate for all sources of error. Digital Enhancement of Analog Measurement Systems presents a universal method of corrections for these effects in which temperature is measured independently of other variables and ex post facto corrections are computed and applied to digitized readings of the analog measurement system.

A single, linear-pattern strain gage, self-temperature-compensated for steel 1018, has been utilized in a quarter-bridge to measure tensile strain in …

Differential Launch Structures And Common Mode Filters For Planar Transmission Lines, Zachary Thomas Bergstedt

Graduate Theses - Electrical and Computer Engineering

Increases in signal speeds and decreases in dimensions pose increasing threats to signal integrity (SI) and electromagnetic compatibility (EMC) in differential interconnects due to the enhanced risk of common mode (CM) conversion. This thesis examines CM filtering solutions for multiple transmission topologies that mitigate CM noise, reducing the threat to SI and EMC. These topologies include microstrip and stripline, which are the most commonly used transmission line architecture in printed circuit boards (PCB), and broadside coupled coplanar waveguides (BC-CPW). Stripline and BC-CPW transmission lines have lower dispersion and attenuation than the commonly used microstrip but have added complexity in introducing …

A Folded Cascode Operational Amplifier With Wide-Swing Current Mirrors And High Icmr, Designed With A 1.2-Micron Silicon-Carbide Process, Austin Gattis

Electrical Engineering Undergraduate Honors Theses

This thesis describes in detail the process of designing, simulating, and creating the layout for a modified folded cascode op-amp, fabricated with silicon carbide MOSFETS. The modifications consist of using a wide-swing current mirror to help deal with output voltage issues stemming from high threshold voltages in the silicon carbide process, as well as using a modification that allows for an increased input common mode range. The folded cascode op-amp uses silicon carbide transistors, as it is intended to be used for high temperature applications, ideally in the 25 C - 300 C range. It is designed to have 25 …

Command Validation For Cybersecure Power Router, Isaac M. Kroger

Electrical Engineering Undergraduate Honors Theses

For grid-connected homes equipped with solar panels, power electronics are necessary to manage and convert power between the solar panels, battery storage, grid, and residential load. A power router can be used to manage these power electronics and govern power generation, storage, and distribution within the household. This level of control makes power routers that do not employ cybersecurity a target for external attacks. The use of command validation is an effective way to prevent unauthorized commands from maliciously altering the state of a home’s power router. The purpose of this thesis is to describe the development of the command …

Automatic Testing In The United States Air Force, Pearson Wade

Computer Science and Computer Engineering Undergraduate Honors Theses

The need for standardized Automatic Testing Equipment in the United States Department of Defense has brought about new policies and procedures within entities like the United States Air Force. The diversity and lifespan of systems such as jets, missiles, drones, and other electronics have brought on the need for a new system known as the Versatile Depot Automatic Test Station, or VDATS. The VDATS handles the automatic testing of replaceable digital circuits from different systems. I was introduced to this system firsthand during my time as an intern at Tinker AFB, Oklahoma. This new standardized approach to testing a diverse …

A Human Powered Micro-Generator For Charging Electronic Devices, John Adam

Senior Theses

A hand-pulled generator has been designed and tested. A preliminary result has been obtained and discussed. This device was created to provide outlet-free charging. Electronic devices are useful when going out into the wilderness. A portable power supply is necessary to keep an electronic device alive. This project created a device that converts human energy into electricity to charge electronic devices. This thesis overviews the device’s design, build, and tests. Two different tests were run to determine that the device is capable of charging the storage battery. The device presented can provide 14 minutes of charging time with one hour …

Radio-Frequency Transmitter Geolocation Using Non-Ideal Received Signal Strength Indicators, Samuel Whiting

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Locating a radio transmitter is important in a number of problems such as finding radio tags, people with radios, and devices that are collecting information in an unauthorized manner. Locating a radio transmitter is inherently difficult because the radio waves of concern are not in the visible spectrum, they reflect and distort easily, and they propagate at the speed of light.

A number of methods for locating transmitters are currently used, the majority of which require expensive hardware and extensive processing. This thesis presents a method of using simpler measurements to produce similar location estimates in order to augment or …

Developing A Hil-Based Software Platform For Testing Electric And Hybrid Vehicle Powertrains, Daniel Schwartz

Graduate Theses and Dissertations

The objective of this thesis is to present a dynamometer test stand with hardware in the loop (HIL) testing capabilities for the evaluation of electric and hybrid vehicle powertrains under realistic driving conditions. The traction inverter and dc/dc converter are two crucial subsystems of the powertrain and new prototypes require significant validation before implementing into production vehicles. As fundamental technologies such as power modules, thermal management systems, and passive components improve; the performance improvements to the overall system must be demonstrated. The plug and play nature of the testbed makes it ideal for making direct comparisons of design iterations under …

Fabrication And Characterization Of Graphene Based 2d Materials For Supercapacitors, Anishkumar Manoharan

Graduate Theses and Dissertations

Supercapacitors have attracted a lot attention due to their efficient energy storage. In comparison to batteries, supercapacitors have high capacitance, energy, and power densities per unit mass than conventional capacitors. Carbon based materials are most promising in supercapacitor application due to their outstanding physical and electrochemical behavior. In this work, a facile method to synthesize a nanocomposite electrode consisting of annealed carbon from carbon ink and MoS2 was demonstrated. Effects of various aqueous and solid electrolytes were studied. It was found that the nanocomposite electrode with 10% MoS2 and 1M Na2SO4 as the aqueous electrolyte tested using the three electrode …

Evaluation Of Terahertz Imaging For Breast Cancer Detection Using Image Morphing, Tanny Andrea Chavez Esparza

Graduate Theses and Dissertations

This thesis proposes the use of a mesh morphing algorithm for the quantitative evaluation of terahertz (THz) images. This work differs from traditional evaluation methods based on qualitative evaluation because it provides a fair and quantitative measurement of the THz imaging system's performance. The objective of the algorithm is to match the alignment, shape, and resolution of the THz and reference pathology images. Therefore, the proposed morphing method provides a pathology reference for a pixel-by-pixel evaluation of the region classification in the THz image. To achieve this, the morphing algorithm aligns the images using the Pearson's correlation coefficient and reshapes …

Security Analysis Of The Uconn Husky One Card, Trevor Phillips

Honors Scholar Theses

The “Husky One Card” is the name given to student IDs at the University of Connecticut. It can identify students, faculty, and staff in a variety of situations. The One Card is used for meal plans, Husky Bucks (an equivalent of money, but valid only in the Storrs area), residence hall/ university facility access, and student health services. The current Husky One Card consists of a picture identification on the front and a standard 1-dimensional barcode and 3-track magnetic strip on the back.

The goal of this thesis is to investigate the feasibility of cloning Husky One Cards, the ease …

Efficient Control Message Dissemination In Dense Wireless Lighting Networks, Conrad Dandelski

PhDs

Modern lighting systems using LED light sources lead to dense lighting installations. The control of such systems using wireless Machine-to-Machine (M2M) where standard LED light sources are replaced by wirelessly controllable LED light sources create new problems which are investigated in this thesis. Current approaches for control message transmission is such networks are based on broadcasting messages among luminaires. However, adequate communication performance - in particular, sufficiently low latency and synchronicity - is difficult to ensure in such networks, in particular, if the network is part of a wireless building management system and carries not only low-latency broadcast messages but …

Challenges In Flexible Microsystem Manufacturing : Fabrication, Robotic Assembly, Control, And Packaging., Danming Wei

Electronic Theses and Dissertations

Microsystems have been investigated with renewed interest for the last three decades because of the emerging development of microelectromechanical system (MEMS) technology and the advancement of nanotechnology. The applications of microrobots and distributed sensors have the potential to revolutionize micro and nano manufacturing and have other important health applications for drug delivery and minimal invasive surgery. A class of microrobots studied in this thesis, such as the Solid Articulated Four Axis Microrobot (sAFAM) are driven by MEMS actuators, transmissions, and end-effectors realized by 3-Dimensional MEMS assembly. Another class of microrobots studied here, like those competing in the annual IEEE Mobile …

Grid-Connected Photovoltaic Systems Based On Nonlinear Control., Pablo R. Rivera

Electronic Theses and Dissertations

Nowadays, due to the high-scale penetration of photovoltaic systems, reliable and efficient grid-connected photovoltaic (PV) systems utilizing the advances of power electronics and control system technology are desirable. Thus, single-stage grid-connected photovoltaic systems, have gained attention, especially in low voltage applications. However, PV systems exhibit nonlinear behavior that could negatively affect the performance of the system if they are not adequately compensated for. In this dissertation, using the general structure for the synchronous dq0 frame, a single-stage three-phase grid-connected photovoltaic system, and a single-stage single-phase grid-connected PV system, both with a nonlinear control strategy, are developed to track the maximum …

Application Of Modular Multilevel Converters (Mmc) Using Phase-Shifted Pwm And Selective Harmonic Elimination In Distribution Systems, Thouhidul Islam

Graduate Theses and Dissertations

Reducing the size and weight of a power electric system is a prodigious challenge to researchers as the development of the latest technologies emerge in the field of electrical engineering. A similar urge is there to develop a light-weight mobile power substation (MPS) to use in the electric power distribution systems during emergency conditions. This thesis proposes a power electronics based solution using the modular multilevel converter (MMC) topology to design the MPS system. The market-available power semiconductor devices are analyzed and suitable devices are selected to design the system. The phase-shifted pulse width modulation (PS-PWM) and selective harmonic elimination …

Gating Methods For High-Voltage Silicon Carbide Power Mosfets, Audrey Dearien

Graduate Theses and Dissertations

The objective of this thesis is to assess the challenges associated with driving Silicon Carbide (SiC) power devices, and to compare the potential gate drive methods for these devices which address those challenges. SiC power devices present many benefits that make them suitable for next generation automotive, power utility grid, and energy management applications. High efficiency, increased power density, and reliability at high-temperatures are some of the main benefits of SiC technology. However, the many challenges associated with these devices have prevented their adoption into industry applications. The argument is made in this thesis that the gate driver is a …

Music Keyboard Based On Flexible Hybrid Electronics, Anthony Hanson

Honors Theses

With the idea of creating a product using flexible hybrid electronics, the group decided to create a musical keyboard like a synthesizer. This is implemented using a printing technique called screen printing. This allowed the group to make several copies of the same sensors with a consistent thickness, roughness, and size. These keys, made of silver, are used as capacitive proximity sensors. When another conductive material comes within range of the key to change the polled capacitance by 2.7 pF, the note corresponding with that key is outputted.

In the interest of making this project a useful tool for someone …

Image Processing Applications In Real Life: 2d Fragmented Image And Document Reassembly And Frequency Division Multiplexed Imaging, Houman Kamran Habibkhani

LSU Doctoral Dissertations

In this era of modern technology, image processing is one the most studied disciplines of signal processing and its applications can be found in every aspect of our daily life. In this work three main applications for image processing has been studied.

In chapter 1, frequency division multiplexed imaging (FDMI), a novel idea in the field of computational photography, has been introduced. Using FDMI, multiple images are captured simultaneously in a single shot and can later be extracted from the multiplexed image. This is achieved by spatially modulating the images so that they are placed at different locations in the …

Small-Signal-Stability Enhancement Using A Power-System Stabilizer Based On The Cuckoo-Search Algorithm Against Contingency N-1 In The Sulselrabar 150-Kv System, Muhammad Ruswandi Djalal, Muhammad Yusuf Yunus, Herlambang Setiadi, Awan Uji Krismanto

Makara Journal of Technology

Small-signal stability is one of the main factors limiting power transmission in conventional power systems. This concern is primarily handled by adding damper windings of a synchronous generator and power-system stabilizer (PSS). However, due to the impact of the N-1 contingency, damper windings and a conventional PSS are insufficient to overcome this problem. Proper placement and design of the PSS are crucial for improving stability. One approach to optimizing the placement and tuning of the PSS is to use an artificial-intelligence method. Here, the cuckoo-search algorithm (CSA) is proposed to optimize the PSS tuning and placement. Based on simulation, it …