Controls and Control Theory Commons^™

Research Properties Of Solving Problems Of Parametric Optimization, Dilnoz Tulkunovna Muhamediyeva

Chemical Technology, Control and Management

A model of parametric optimization with fuzzy initial information is constructed. The conditions and areas of application of the main methods of the theory of fuzzy sets in studies of parametric optimization are determined. A connection is established between the stability of parametric optimization problems and fuzzy optimization problems. An algorithm for solving problems by the method of parametric programming is developed for fuzzy given initial information. The admissible region of the parametric programming problem and the value of its objective function at each point of this region depend on the parameter t. A description of the method for solving …

Development Of A Control Device And Algorithm For Autonomous-Moving Systems, Farhod Qosimov, Ru Jiang, Dong Zhang, Mirkhalil Ismailov

Chemical Technology, Control and Management

The article is devoted to improving the control and algorithm for Autonomous moving systems. The function of the controller is to provide communication between the control computer and the actuator. The ATmega2560 microcontroller is selected as the main processor. The electrical diagram of additional devices of the microcontroller is formed. Printed circuit boards consisting of separate blocks are made on the basis of the electrical circuit. To exchange information with external systems and process the received data, a special algorithm for the microcontroller has been created. The microcontroller is programmed based on this algorithm. The analysis of the functioning of …

Extraction Of Chitosan From Died Honey Bee Apis Mellifera, Gulnora Akmalovna Ixtiyarova, Dilshoda Azamovna Hazratova, Bobur Nosir O’G’Li Umarov, Oksana Muratbayevna Seytnazarova

Chemical Technology, Control and Management

This article presents the results of obtaining biopolymers of chitin and chitosan from a new promising source- died honey bee apis mellifera. To obtain chitin, at the first stage, the protein (deproteination) and mineral (demineralization) constituents of subpestilence, i.e. put them in soluble state and removed. Demineralization was carried out with 2 M hudrochloric acid for 5 hours at room temperature. The process of deproteination is carried out by processing the crushed raw materials with 1 N sodium hudroxide solution for 1 hour at a temperature of 80⁰С. Each process was accompanied by washing the raw materials to …

Mathematical Modeling Of Thermal Processes Of Traction Asynchronous Engines For Diagnosis And Control Of Their Technical Condition, Nilufar Rabbanaqulovna Avezova, Javharbek Sulton Ugli Fayzullayev

Chemical Technology, Control and Management

Mathematical models of thermal processes of traction asynchronous motors are developed. A traction asynchronous motor is considered as a thermal system consisting of three bodies (stator winding, stator magnetic core and rotor), which take into account the heat exchange not only between the corresponding bodies, but also the heat exchange between each body and the environment. It is shown that the steady excess of the stator winding temperature of a traction asynchronous motor depends on the multiplicity of the stator winding current, the coefficient of electrical energy loss, and also on the temperature coefficient of the resistance of the winding …

Stability Analysis Of Systems With Time Delay Simulation Program, Matthew Carroll, Brandon Replogle

Electrical Engineering

A small company wants to develop a CAD tool, ideally as part of the MATLAB suite of tools, for system stability analysis of nonlinear control systems with time-delay. The program must allow the designer to input the system block diagram graphically, then using symbolic expansion, automatically generate the Laplace domain stability boundary and disturbance settling time. The stable regions are then to be graphically plotted as a set of 2- or 3-dimensional parametric stability boundaries. The designer can then input performance constraints on the system through the MATLAB console and a Simulink environment will automatically be generated.

This program is …

Dc Treasure Box, Michael A. Derrenbacher

Electrical Engineering

An all in one DC resource would enable electronics students to prototype circuits for labs and projects without the need for the lab equipment present on campus. The labs on campus can be physically far, closed, or overcrowded, preventing students from accessing the equipment. Roughly 75% of upper division electrical engineering students do not own power supplies, with even fewer students owning a source measurement unit (SMU). There is a significant need for a product capable of providing standard lab equipment functionality. The functionally this project provides are positive and negative DC power supplies, 4-Quadrant SMU, analog inputs and outputs, …

Plant Growing Control With Modicon M580, Brittany M.Y. Won, Eileen T. Tran

Electrical Engineering

Currently, the Industrial Power and Controls lab is being developed by the Cal Poly Electrical Engineering department. The lab is equipped with recently donated Modicon M580 Programmable Logic Controllers (PLCs) from Schneider Electric. In addition to PLCs, Schneider Electric also donated Human Machine Interfaces (HMI) and input/output modules. This project focuses on the creation of a lab experiment that will give future Cal Poly electrical engineering students hands-on experience with this equipment. To show students the broad range of PLCs and the role that electrical engineering plays in various industries, this experiment focuses on the agriculture industry, but more specifically, …

Evaluating Driving Performance Of A Novel Behavior Planning Model On Connected Autonomous Vehicles, Keyur Shah

Honors Scholar Theses

Many current algorithms and approaches in autonomous driving attempt to solve the "trajectory generation" or "trajectory following” problems: given a target behavior (e.g. stay in the current lane at the speed limit or change lane), what trajectory should the vehicle follow, and what inputs should the driving agent apply to the throttle and brake to achieve this trajectory? In this work, we instead focus on the “behavior planning” problem—specifically, should an autonomous vehicle change lane or keep lane given the current state of the system?

In addition, current theory mainly focuses on single-vehicle systems, where vehicles do not communicate with …

Design Of Versatile Feedback Control System Components For Selective Laser Sintering, Thomas Chessman

University Scholar Projects

Selective laser sintering (SLS) is an additive manufacturing technique that involves using a laser to fuse powdered material together, layer by layer, in order to create a 3-D product. Despite its numerous benefits over traditional methods of manufacturing, including higher efficiency, versatility, and the ability to process many materials, selective laser sintering suffers from its propensity to generate structural errors during operation.

Feedback control has been shown to improve fabrication quality in other laser-based additive manufacturing techniques when implemented properly. Widespread exploration of applying feedback control in SLS might lead to significant performance improvements in this form of manufacturing.

This …

Application Of Optimal Switching Using Adaptive Dynamic Programming In Power Electronics, Ataollah Gogani Khiabani

Mechanical Engineering Research Theses and Dissertations

In this dissertation, optimal switching in switched systems using adaptive dynamic programming (ADP) is presented. Two applications in power electronics, namely single-phase inverter control and permanent magnet synchronous motor (PMSM) control are studied using ADP. In both applications, the objective of the control problem is to design an optimal switching controller, which is also relatively robust to parameter uncertainties and disturbances in the system. An inverter is used to convert the direct current (DC) voltage to an alternating current (AC) voltage. The control scheme of the single-phase inverter uses a single function approximator, called critic, to evaluate the optimal cost …

Control And Locomotion Of Inertially And Magnetically Actuated Multi-Scale Robotic Systems, Ehab Al Khatib

Mechanical Engineering Research Theses and Dissertations

In this research, two actuation systems were introduced, inertial and magnetic actuation. In the inertial actuation, the robot used the transfer of momentum to navigate, and this momentum could be generated by spinning masses and wheels. Recent studies in our System Laboratory proved that a wide range of inertially actuated locomotion systems could be generated. This can be achieved by using a family tree approach, starting from a very simple system, and progressively evolving it to more complex ones. The motion diversity of these robots inspired us to extend their locomotion from a macro scale to millimeter and micro scales. …

Reducing Emi In Sic Direct Torque Controlled Motor Drive, Michael Sykes

Electrical Engineering Undergraduate Honors Theses

This paper covers the comparison between Silicon (Si) vs Silicon Carbide (SiC) for Motor Drive systems and a possible control algorithm to limit the increased Electromagnetic Interference (EMI) caused by using SiC transistors for the inverter. Motor Drive systems need constant improvements if the world is going to move on from machines that emit CO₂ and other harmful gases into the Earth’s atmosphere. One reason these electric machines are not commonplace today is because of their efficiency and other problems they may cause. Silicon transistors are the most commonplace transistor around the world today, but advances over the past …

Robust Control Of Burst Suppression Amid Physical And Neurological Uncertainty, Stephen Ampleman, Shinung Ching

McKelvey School of Engineering Graduate Student Theses & Dissertations

Burst suppression is a clinical term describing a phenomenon in which the electroencephalogram (EEG) of a sedated patient produces behavior that switches between higher frequency and amplitude bursting to lower frequency and lower amplitude suppression. This phenomenon can be observed during general anesthesia, hypothermia, or in an otherwise induced coma state. In a clinical setting, this phenomenon is typically induced by sedation from a drug such as propofol (2,6-diisopropylphenol). The level of sedation can be quantified by something called the burst suppression ratio (BSR), which is defined as the amount of time that a patient’s EEG is in a suppressed …

High- And Low-Voltage Mitigation In Distribution Systems Using Residential Static Volt-Ampere Reactive Compensators, Andrés Valdepeña Delgado

Boise State University Theses and Dissertations

Power distribution systems are experiencing a fast transformation from simple one-way radial feeders to complex systems with multiple sources and bidirectional power flows. The rapid increase of Distributed Generation (DG) connected to the distribution system over the last decade, especially solar photovoltaic (PV), has been the key element to this transformation.

The variable nature of PV-based DG has increased the complexity of voltage regulation in distribution systems. Electric Utilities are facing an increasing number of voltage issues in distribution systems with high penetration of DGs, leading customers to experience voltage levels outside of range A of the ANSI C84.1 standard. …

Research Tools And Their Uses For Determining The Thermal Inactivation Kinetics Of Salmonella In Low-Moisture Foods, Soon Kiat Lau

Department of Food Science and Technology: Dissertations, Theses, and Student Research

The reputation of low-moisture foods as safe foods has been crumbling over the past decade due to repeated involvement in foodborne illness outbreaks. Although various pasteurization technologies exist, a majority are thermal processes and have not been well-characterized for pasteurizing low-moisture foods. In addition, the nature of a low-moisture food matrix introduces various experimental complications that are not encountered in high-moisture foods. In this dissertation, the development, building instructions, and characterization of various open source tools for studying the inactivation kinetics of microorganisms in low-moisture foods are described. The first tool is the TDT Sandwich, a dry heating device for …

Tech Comm Eagle Eye-Tracking Control System, Gabiella Lail, Robert Shaw, Hunter Smatla, Matthew Gary

Discovery Day - Prescott

Mobile eye-tracking systems provide usability research support as well as access to a wide range of robotics and technical communication research opportunities. Optical tracking systems are often prohibitively expensive and do not provide the mobility or flexibility needed for a variety of research application possibilities. Our team proposes building a simple mobile eye-tracking system to be used in-house at ERAU for heat-mapping, robotics, control systems, and various technical communication applications in a structured research environment. The mobile eyetracking system will become part of a larger research and hands-on technical communication usability lab and research center. The research team intends to …

Advanced Mechatronics, Hao Su

Open Educational Resources

Project-based course on the design of mechatronic devices to address needs identified by hospital-based clinicians and industry. Students work in teams to develop a mechatronic prototype. The lectures will cover the design of medical devices and robotics including sensors, actuators, and robots. The students will communicate with customers to understand design needs, then conduct study on prior art, intellectual property, due diligence, and idea conceptualization. Students will present ideas in class and to a broad audience from local industry. Students will also write a publication-quality final report, which they will be encouraged for publication submission.

Engineering Design I, Hao Su

Open Educational Resources

Introduction to robotics

Optimizing Llrf Parameters In The Electron-Ion Collider, William M. Bjorndahl

Physics

To improve particle interaction in the future Electron-Ion Collider (EIC), we investigated different feedback implementations to control the accelerating voltage and examined the power and beam phase for each instance. Using MATLAB, we studied three feedback mechanisms: Direct, One Turn, and Feedforward. Enacting feedforward yielded the best performance. To minimize the klystron power consumption, we analyzed different Low-Level Radio Frequency (LLRF) parameters such as detuning. Combining theory and simulated results, we found the optimal detuning value that minimizes klystron power consumption.

Decentralized, Noncooperative Multirobot Path Planning With Sample-Basedplanners, William Le

Master's Theses

In this thesis, the viability of decentralized, noncooperative multi-robot path planning algorithms is tested. Three algorithms based on the Batch Informed Trees (BIT*) algorithm are presented. The first of these algorithms combines Optimal Reciprocal Collision Avoidance (ORCA) with BIT*. The second of these algorithms uses BIT* to create a path which the robots then follow using an artificial potential field (APF) method. The final algorithm is a version of BIT* that supports replanning. While none of these algorithms take advantage of sharing information between the robots, the algorithms are able to guide the robots to their desired goals, with the …