Biomedical Engineering and Bioengineering Commons^™

Validation Of Meta Motion Imu Sensors Through Measurement Of Knee Angles During Gait, Kerri Caruso

Biomedical Engineering Theses & Dissertations

The implementation of inertial measurement units (IMU) in the biomechanical field has become increasingly popular due to their robustness, simplicity, accuracy, and the ability to move research out of a lab and into the real world. In this study, the MetaMotion IMU sensors are assessed for validity against a dynamometer and the Vicon motion capture system. Both systems have proven their measuring accuracies in the biomechanics world and are used as the truth source for this validation study. In the first part of this study, the sensors are assessed for various common sensor errors. Individual sensor components of the IMU, …

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …

Dpd Guided Insight On The Formation Process Of Polyethersulfone Membranes By Nonsolvent Induced Phase Separation And The Effects Of Additives, Eric Ledieu

Graduate Theses and Dissertations

Dissipative particle dynamics (DPD), a coarse grain simulation method, was applied to the membrane formation process of non-solvent induced phase separation (NIPS) to gain further insight on the mechanism of certain variables and how they affect the final morphology. NIPS involves two solutions, an organic polymer dissolved in an organic solvent colloquially called the dope and an aqueous coagulation bath, brought into contact with one another. The solvents then mix, causing the polymer to fall out of solution as an asymmetric membrane with a dense surface layer and a more open subsurface layer in response to the decreasing solubility. Polyethersulfone …

Polymeric Biomaterials Approaches For Engineering The In Vitro Cellular Microenvironment For Mscs, Mahsa Letter-Mahsa Haseli

Graduate Theses and Dissertations

Cell therapy is a technology that relies on replacing diseased or dysfunctional cells with healthy functioning ones. One of the cells used for such advanced therapies are stem cells, owing to their ability to differentiate into specific cells required for repairing damaged or defective tissues or cells. The majority of cell-based products are intended to transiently persist in the patient, secreting factors which then allow the patient’s body to heal; in these products, the cells are subsequently eliminated from the body. Furthermore, unique manufacturing platforms, in addition to novel commercialization strategies, will be required to create a successful, sustainable cell …

Effect Of Human Decellularized Skeletal Muscle On Recovery From Volumetric Muscle Loss Injury, Jacob Schluns

Graduate Theses and Dissertations

Volumetric muscle loss (VML) overwhelms muscle’s robust capacity for regeneration. A key event in the etiology of VML injury is the bulk loss of structural cues provided by the underlying extracellular matrix (ECM). While muscle is a highly structured tissue, with cell and ECM alignment in the direction of contractile force production, the impact of scaffold alignment on recovery remains unclear. Bulk human decellularized skeletal muscle (DSM) tissues were sectioned into 10 x 1-2 mm fibers. VML defects were repaired using multi-fiber implants consisting of approximately 8 fibers per defect arranged into two layers. Fibers were oriented 1) to the …

Structure-Property-Processing Analysis Of Graphene Bioscaffolds For Viability And Differentiation Of C2c12 Cells, Lynn Karriem

Boise State University Theses and Dissertations

We investigated the structure – property – processing correlation of graphene bioscaffolds produced using three different methods. Bioscaffolds were prepared by chemical vapor deposition (CVD), sublimation of Silicon Carbide (SiC), and printed solvent assisted exfoliated graphene ink. To gain insight into the roughness and topography of graphene, AFM was performed on each bioscaffold. Raman spectroscopy mapping demonstrated differences in the I_2D/I_G ratio for each scaffold. Young’s modulus was determined by nanoindentation and indicated that epitaxial graphene had the highest average stiffness, followed by CVD, with printed graphene demonstrating the lowest average stiffness. To investigate the biocompatibility of …

Interrogating Autism From A Multidimensional Perspective: An Integrative Framework., Mohamed T. Ali

Electronic Theses and Dissertations

Autism Spectrum Disorder (ASD) is a condition characterized by social and behavioral impairments, affecting approximately 1 in every 44 children in the United States. Common symptoms include difficulties in communication, interpersonal interactions, and behavior. While symptoms can manifest as early as infancy, obtaining an accurate diagnosis may require multiple visits to a pediatric specialist due to the subjective nature of the assessment, which may yield varying scores from different specialists. Despite growing evidence of the role of differences in brain development and/or environmental and/or genetic factors in autism development, the exact pathology of this disorder has yet to be fully …

Scan2drawing: Use Of Deep Learning For As-Built Model Landscape Architecture, Sisi Han, Yuhan Jiang, Yilei Huang, Mingzhu Wang, Yong Bai, Andrea Spool-White

Biomedical Engineering Faculty Research and Publications

This paper presents an innovative and fully automatic solution of generating as-built computer-aided design (CAD) drawings for landscape architecture (LA) with three dimensional (3D) reality data scanned via drone, camera, and LiDAR. To start with the full pipeline, 2D feature images of ortho-image and elevation-map are converted from the reality data. A deep learning-based light convolutional encoder–decoder was developed, and compared with U-Net (a binary segmentation model), for image pixelwise segmentation to realize automatic site surface classification, object detection, and ground control point identification. Then, the proposed elevation clustering and segmentation algorithms can automatically extract contours for each instance from …

Characterizing Endothelial Damage During Ischemic Stroke Treatment With 3d Cerebrovascular Live Cellular And Finite Element Models, Ana Regina Martinez Dehesa

Theses and Dissertations

Stent retriever mechanical thrombectomy (SRMT) is part of the clinical standard-of-care for acute ischemic stroke (AIS) patients with large vessel occlusion (LVO). Endothelial injury (EI) is widely associated with SRMT. Studies report finding EI markers in over 50% of retrieved clots, suggesting the frequency of EI in MT patients is rather common. The mechanism of EI and its contribution to MT failure and clinical outcomes remain poorly understood because of a lack of techniques to observe EI and study it in vitro. This study aims to investigate the mechanisms of EI induced by SRMT, as well as the effect stent …

Development Of A Customizable Framework For Data Driven Hemodynamic Analysis With Applications In Neurovascular And Cardiovascular Scenarios, Rachel Mae Hillner

Theses and Dissertations

Cardiovascular disease, including but not limited to heart failure and aneurysms, remain a leading cause of death worldwide. Persons over the age of 40 experience upwards of a 20% chance of developing heart failure in their lifetime. With a decrease in viable donor hearts, the reliance on mechanical heart assist devices is on the rise. However, such devices are not without their complications. Specifically, for left heart failure, a common treat, the left ventricular assist device, is characterized by clotting, stroke, and low survival rates as a result. Many studies suggest that such unfavorable results are correlated to adverse hemodynamic …

A Reduced Order Model For Estimation Of Fractional Flow Reserve (Ffr) In Coronary Artery Disease: Assessing The Impact Of Side Branches, Arber Vila

Theses and Dissertations

Coronary Artery Disease (CAD) affects millions of people worldwide and remains a leading cause of morbidity and mortality. To effectively plan treatment and risk stratification, assessing CAD severity is of paramount importance. Fractional flow reserve (FFR) is a critical clinical parameter used to evaluate CAD severity, measured by the ratio of mean distal coronary pressure to mean aortic pressure during hyperemic conditions. Although non-invasive FFR estimation methods have gained popularity, computational fluid dynamics (CFD) is impractical for routine clinical use due to the time and resources required. To address this issue, a reduced order model is proposed that accurately captures …

Rattus Norvegicus As A Biological Detector Of Clandestine Remains And The Use Of Ultrasonic Vocalizations As A Locating Mechanism, Gabrielle M. Johnston

Master's Theses

In investigations, locating missing persons and clandestine remains are imperative. One way that first responder and police agencies can search for the remains is by using cadaver dogs as biological detectors. Cadaver dogs are typically used due to their olfactory sensitivity and ability to detect low concentrations of volatile organic compounds produced by biological remains. Cadaver dogs are typically chosen for their stamina, agility, and olfactory sensitivity. However, what is not taken into account often is the size of the animal and the expense of maintaining and training the animal. Cadaver dogs are typically large breeds that cannot fit in …

Development Of A Pediatric Heart Assist Device Monitoring System, Natalie Hill

Theses and Dissertations

Heart failure (HF) is one of the leading causes of deaths for adults worldwide, but has disproportionately significant effects on pediatric patients that are often overshadowed. Treatment options for pediatric patients with HF are extremely limited, resulting in increased mortality rates within hospitals. Patients often depend on ventricular assist device (VAD) support as a bridge to transplant. The Berlin Heart EXCOR is the only FDA approved device for pediatric use in the US. However, many hemodynamic and neurological complications continue to arise; for instance, up to 30% of EXCOR patients suffer from stroke. Currently, there is no effective way to …

Laser Inscribed Graphene Aptasensor For Detection Of Apple Stem Pitting Virus, Yifan Tang

All Theses

Apple stem pitting virus (ASPV) is a latent RNA virus that could cause significant loss to apple production; early-stage field diagnosis could reduce the economic loss caused by ASPV infection. Biosensor is a promising user-friendly detection tool that could transduce biological or chemical interactions into electric signals. Among various types of biosensors, aptasensor, which use aptamers as recognition elements show potential as a high throughput, in-field test. The goal of this thesis is to develop an electrochemical aptasensor testing system for ASPV detection. The quality control study of laser inscribed graphene (LIG) based working electrode of the biosensor was conducted …

Cortical Effects Of Wrist Tendon Vibration During An Arm Tracking Task In Chronic Stroke Survivors: An Eeg Study, Dylan B. Snyder, Scott A. Beardsley, Allison S. Hyngstrom, Brian D. Schmit

Biomedical Engineering Faculty Research and Publications

The purpose of this study was to characterize changes in cortical activity and connectivity in stroke survivors when vibration is applied to the wrist flexor tendons during a visuomotor tracking task. Data were collected from 10 chronic stroke participants and 10 neurologically-intact controls while tracking a target through a figure-8 pattern in the horizontal plane. Electroencephalography (EEG) was used to measure cortical activity (beta band desynchronization) and connectivity (beta band task-based coherence) with movement kinematics and performance error also being recorded during the task. All participants came into our lab on two separate days and performed three blocks (16 trials …

Mechanical Properties And Morphological Alterations In Fiber-Based Scaffolds Affecting Tissue Engineering Outcomes, James Dolgin, Samerender Nagam Hanumantharao, Stephen Farias, Carl G. Simon, Smitha Rao

Michigan Tech Publications, Part 1

Electrospinning is a versatile tool used to produce highly customizable nonwoven nanofiber mats of various fiber diameters, pore sizes, and alignment. It is possible to create electrospun mats from synthetic polymers, biobased polymers, and combinations thereof. The post-processing of the end products can occur in many ways, such as cross-linking, enzyme linking, and thermal curing, to achieve enhanced chemical and physical properties. Such multi-factor tunability is very promising in applications such as tissue engineering, 3D organs/organoids, and cell differentiation. While the established methods involve the use of soluble small molecules, growth factors, stereolithography, and micro-patterning, electrospinning involves an inexpensive, labor …

Investigating Myosin Ensemble Force Generation Using Optical Tweezers, Janie Watts

Honors Theses

Myosin is a motor protein that facilitates muscle contraction and movement by stepping along actin filaments using energy from ATP hydrolysis. If myosin or other motors are disrupted throughout the body, it can have many harmful effects. Hypertrophic cardiomyopathy is a disease caused by gene mutations that affect myosin heavy chains in the heart. The tissue of the heart becomes abnormally thick, which can make it more difficult to pump blood or block blood flow out of the heart. Our goal is to discern the mechanistic difference function of a healthy and diseased heart. To accomplish this, we construct model …

Regenerative Medicine For Tendon/Ligament Injuries: De Novo Equine Tendon/Ligament Neotissue Generation And Application, Takashi Taguchi

LSU Doctoral Dissertations

Tendon and ligament injuries are debilitating conditions across species. Poor regenerative capacities of these tissues limit restoration of original functions. The first study evaluated the effect of cellular administration on tendon/ligament injuries in horses using meta-analysis. The cellular administration was effective in restoring ultrasonographic echogenicity and increasing vascularity during early phase of healing. Additionally, it improved microstructural organization of healed tissue in terms of cellularity and fiber alignment. However, the study did not support its use for increasing rate of return to performance, expression/deposition of tendon-specific genes/proteins, or mechanical properties.

The findings led to the second study that engineered implantable …

Advanced Biomedical Laboratory (Abl) Synergy With Communication, Robotics, And Iot, Razvan Cristian Voicu, Steven Steele, Jorge Diaz Rodriguez, Yusun Chang, Chan Ham

Symposium of Student Scholars

This paper proposes a framework for integrating IoT and automation in a biomedical laboratory to improve safety, optimize processes, and enhance students' learning experience. The framework incorporates a centralized control unit and distributed subsystems to control equipment and machinery and includes autonomous robotics and intelligent monitoring systems. The paper presents the results of undergraduate students' work on automating various biomedical processes, including developing an Intelligent Autonomous Monitoring (IAM) device. IAM utilizes machine learning algorithms to identify outliers in processes and safety hazards. Moreover, IAM autonomously detects and localizes biomedical tools and equipment. Results show the feasibility of delivering real-time results …

Biomedical Sensing - A Sensor Fusion Approach For Improved Medical Detection And Monitoring, Ammy Ovando, Ricardo Ramirez, Steven Steele, Amir Ali Amiri Moghadam, Yusun Chang, Razvan Voicu

Symposium of Student Scholars

Enhanced technological advancement in computation, communication, and sensing has dramatically changed the dynamics of modern medicine. Advancing preventive medicine is paramount to a sustainable improvement in the quality of life and life expectancy. On-body sensors provide continuous measurements for healthy and ailing individuals leading to faster recovery and more timely detection of illnesses. Novel sensor designs and sensor fusion for preventive monitoring can provide extensible benefits, including a better understanding of ailment progression, treatment optimization, and patient feedback through data analytics and visualization. However, existing research does not thoroughly investigate sensor fusion approaches in biomedical sensing, as well as spot …