Molecular, Cellular, and Tissue Engineering Commons^™

Modeling Structural Support To Facilitate Novel Treatments Of Degenerative Disc Disease, Jose Luis Calderon

Poster Presentations

Over 600 million people worldwide suffered from low back pain in 2020, with projections for 2050 being over 800 million [1]. Annual costs associated with low back pain total over 450 billion dollars in the US alone [2]. This research serves as a proof-of-concept for the use of structural supports to facilitate intervertebral disc healing. This treatment would involve the implementation of these supports along with existing injection treatments to promote regeneration. In both models, along with the combined model, the ability for these supports to alleviate intervertebral disc height loss is shown. This indicates that these supports would serve …

The Impact Of Dipeptides On Product Quality In Chinese Hamster Ovary Cells, Louise C. Herman

All Theses

Biopharmaceuticals are medicines produced in cells which are used to treat diseases such as cancer. Monoclonal antibodies (mAbs) represent the majority of approved biotherapeutics. MAbs are mostly produce using Chinese hamster ovary (CHO) cells. CHO cells are favored for resiliency, scalability, and established safety, and are considered the “workhorse” organism for biopharmaceuticals.  Amino acids are a key component of cell culture media, however several amino acids have solubility limits, such as cysteine, cystine, and tyrosine.  At neutral pH, these amino acids are poorly soluble.  However, dipeptides, such as N,N'-di-L-Alanyl-L-Cystine (ACCA) have been reported to increase cysteine and cystine availability. Further, …

Fluorescence-Based Quantification Of Hepatic Ldl Uptake And Donor Hepatocyte Engraftment Using Atto 700–Labeled Ldl, Victor Agustin Cortes Flores

All Theses

Familial hypercholesterolemia (FH) is an inherited disorder characterized by elevated low-density lipoprotein cholesterol (LDL-C) that increases the risk of premature atherosclerotic cardiovascular disease. In severe FH, including low-density lipoprotein receptor (LDLR), hepatic LDL clearance is profoundly impaired and many lipid lowering treatment strategies have limited effectiveness. Current advances in ex vivo CRISPR–Cas9 hepatocyte gene editing in vivo and ex vivo approaches for treatment of FH are under development.

However, a central barrier to translation is the ability to quantitatively measure the percentage of healthy gen edited hepatocytes in the liver while simultaneously assessing functional hepatic LDL handling. This thesis establishes …

Quantitative Fluorescence Imaging Using A Paired Agent Approach For Improving Surgical Decision Making, Sanjana Pannem

Dartmouth College Ph.D Dissertations

Surgical resection remains to be the cornerstone of treatment for most solid tumors, where the primary objective is to remove all visible and microscopic disease. However, the extent of tumor resection is inherently limited by the surgeon’s ability to distinguish tumor from normal tissue, intraoperatively. As a result, positive surgical margins (PSM), where residual tumor remains after surgery, are a common occurrence and are associated with increased recurrence, need for adjuvant therapies, dismal patient outcomes, and high healthcare costs.

Fluorescence guided surgery (FGS) has emerged as a promising technique to enhance intraoperative visualization of tumors and may help reduce the …

Recombinant Gelonin: Purification And Functional Validation For Electroporation-Assisted Delivery, Eleni Zivla, Giedrė Šilkūnienė, Andrei G. Pakhomov, Mantas Šilkūnas, Olga N. Pakhomova

Knowledge and Creativity Expo

Type I ribosome-inactivating proteins, such as gelonin, are enzymatically potent toxins but are effectively non-toxic under physiological conditions because they are unable to cross the plasma membrane[1]. Pulsed electric fields (PEF) overcome this delivery barrier by transiently permeabilizing the plasma membrane, allowing direct cytosolic entry. This enhances gelonin cytotoxicity by several thousand-fold, highlighting gelonin’s potential as an electrochemotherapy candidate[2]. Here, we present a recombinant gelonin (rGel) expression platform in E. coli with HPLC-based purification that enables reproducible protein production and structure-guided engineering.

The mature gelonin sequence (residues 47–297) was cloned into pET-32a(+) with an N-terminally fused Trx-6×His tag and TEV …

Mechanical, Thermal And Fire Behaviour Of Hemp-Based Composites With Different Binders For Sustainable Building Applications, Anilcan Aygun, Fahri Birinci, Selim Aytac, Ali Kemal Ayan, Hasan Alp Sahin, Ibrahim Isildak

Journal of Sustainable Construction Materials and Technologies

This study investigates the physical, mechanical and thermal properties of hemp-based composites produced with traditional binders such as lime, cement, gypsum, clay, and water-based glue. Hemp fractions of different sizes (splinter, shiv, fiber and powder) were combined with these binders to manufacture cube and plate specimens, which were tested for physical, mechanical, thermal, and temperature resistance properties. The study aims to compare the mechanical, physical, thermal, and fire behaviour of these composites to assess their suitability for sustainable construction applications. The hemp-based composites were tested for unit weight, water absorption, compressive strength and thermal conductivity. Most specimens are lightweight (<1000 kg/m3), and exhibit good thermal insulation performance and high compressive deformability, making them suitable for seismic-prone regions. The glue-based composite had the lowest unit weight, measured as 330 kg/m3. Thermal conductivity ranged from 0.051 to 0.243 W/m· K, with several mixtures performing better than natural pumice. While cement-based composites showed the highest compressive strength, ranging from 5.5 to 24.8 kg/cm2, natural hydraulic lime is the lowest. Water absorption was high, and moisture release occurred slowly across all hemp fractions. Combustion tests indicated that hemp-based materials have moderate temperature resistance, with charring temperatures ranging from 238–265°C for raw hemp and 300–385°C when mixed with binders. Overall, hemp-based composites are lightweight, eco-friendly, and suitable for non-load-bearing construction and insulation applications. However, improvements in moisture resistance and long-term durability are necessary to enhance their practical applicability.

Sustainable Cow Dung Bricks: An Innovative Approach To Eco-Friendly Masonry With Enhanced Thermal And Mechanical Performance, Nagesh Sugandhi, Sachin Patil, Satish Reddy, Ashwini G, Santosh Kumar

Journal of Sustainable Construction Materials and Technologies

This study explores the development, characterization, and performance of sustainable cow dung bricks using locally sourced organic (cow dung) and mineral (clay, quartz sand, feldspar, lime) constituents for non-load-bearing masonry in India. Three blends with varying cow dung content (70%, 75%, 80%) were mixed, molded, air dried, and cured without kiln firing to reduce environmental impact. The bricks' mechanical properties—compressive strength, water absorption, bulk density, flexural strength, shore hardness, and modulus of elasticity—were systematically evaluated with complete statistical documentation (n = 6 replicates per formulation per test age). Microstructural features were investigated using Fourier Transform Infrared Spectroscopy (FTIR) and X-Ray …

Sustainable Cement-Blast Furnace Slag Mortar, Richa Jain, Harshit Jain, Ashish Nim

Journal of Sustainable Construction Materials and Technologies

New building materials that required and produced less energy are need of today's infrastructure development. The ability of such building materials to promote sustainable development always puts its demand in active mode. With huge consumption of naturally occurring materials in building construction, the problem related to environment degradation is now common for world. Along with this, world is also facing the problem of reuse, recover and scientifically approved disposal of non-biodegradable wastes. Blast furnace slag (BFS) is one of those steel industry wastes that are abundantly available and their disposal arises as prime challenge for industries. This research work makes …

Targeting Glioblastoma: Mechanistic And Clinical Perspectives From Uofl Research, Swetha Senthil Nathan

The Cardinal Edge

Glioblastoma (GBM) remains one of the most aggressive and treatment-resistant brain tumors, with median survival lingering at 12–15 months despite surgery, radiation, and chemotherapy. This article explores cutting-edge research and clinical efforts at the University of Louisville aimed at improving GBM treatment outcomes. Dr. Joseph Chen investigates the tumor microenvironment, revealing how physical properties such as stiffness and porosity drive GBM cell proliferation, migration, and resistance to apoptosis. His lab’s findings suggest that porosity, rather than stiffness alone, may be a more accurate predictor of tumor invasion and progression-free survival. Additionally, his research highlights the role of hyaluronic acid and …

Impact Of Glass Powder As A Sustainable Material On The Workability, Strength, And Durability Properties In High-Performance Basalt Fiber Reinforced Concrete: A Statistical Analysis, Ahmed Fathi Mohamed Salih

Journal of Sustainable Construction Materials and Technologies

The global construction sector is increasingly challenged to balance environmental sustainability with the growing demand for durable, high-performance materials. As cement production continues to be a major source of anthropogenic CO2 emissions, the incorporation of alternative, low-impact binders has become a key strategy for reducing the environmental footprint of concrete. In this context, glass powder (GP)—a finely ground industrial by-product rich in amorphous silica—has emerged as a promising partial replacement for Portland cement. Its pozzolanic reactivity contributes to improved hydration and matrix densification, while its use also supports circular economy principles by diverting waste glass from landfills. At the same …

Advancing Computational Analysis Of Fluorescence Imaging For Head And Neck Cancer Surgical Guidance, Yao Chen

Dartmouth College Ph.D Dissertations

The main goal of surgery for head and neck squamous cell carcinoma (HNSCC) is to remove the tumor completely while preserving as much healthy tissue as possible to enhance patient survival and reduce complications. However, achieving clear surgical margins is difficult due to the complex anatomy of the head and neck and the reliance on a surgeon’s visual and tactile assessments. Recently, near-infrared (NIR) fluorescence molecular imaging has shown potential for better tumor visualization during surgery, using targeted imaging agents like epidermal growth factor receptor (EGFR) probes. This has led to the development of fluorescence-guided surgery (FGS), which helps surgeons …

The Impact Of Human Myoblasts On Macrophage Polarization In A Coculture Model, Elisabeth Ann Stodola

Biomedical Engineering

Peripheral Artery Disease (PAD) is characterized by the buildup of atherosclerotic plaque in the lower extremities that occludes blood flow, and affects over 200 million people worldwide. Without effective treatment, PAD can lead to claudication, ischemia, ulcers, and gangrene. PAD causes more amputations in the United States than any other condition, and for severe cases that require revascularization, procedures benefit fewer than 50% of patients. This demonstrates a clear need for alternative therapies. Potential therapies for PAD target expansion of collateral blood vessels around the area of occlusion – a process called arteriogenesis to compensate for loss of blood flow …

Balancing Carbon Emissions In Façade Of Residential Buildings Through Bim-Lca: A Comparative Analysis Of Insulation Materials, Mehran Alipour

Journal of Sustainable Construction Materials and Technologies

Thermal insulation materials play a significant role in balancing buildings' total carbon emissions. Balancing involves applying the optimized amount of insulation materials to avoid excessive emissions in either the operational or embodied phases. Due to the wide range of insulation materials and variations of their specifications, it is vital to analyse them individually. The focus of this study is to optimize the amount of insulation materials in the facades of Residential Buildings (RB) to balance the amount of Operational Carbon Emissions (OCE) and Embodied Carbon Emissions (ECE) by applying the Building Information Modelling-Life Cycle Assessment (BIM-LCA) integration method. The Life …

Nanoscale Opportunities In Extracellular Matrix Mimicry, L. Andrew Lyon, Abbygail Caine, Elif Narbay, E. Daniel Cárdenas-Vásquez

Engineering Faculty Articles and Research

We present an overview of the composition, function, energetics, and dynamics of extracellular matrix and its relation to nanoscale structures and phenomena. These concepts are then related to the development of synthetic and biosynthetic materials that aim to mimic the extracellular matrix for regenerative medicine and tissue engineering technologies. Notable successes and advancements towards the goal of biomimicry are outlined, while remaining challenges and knowledge gaps towards that goal are highlighted. Finally, we frame the remaining challenges in the field in terms of nanoscience-related research opportunities that if solved, might prove to be transformative steps forward in the discipline.

Integrating Sustainable Material Procurement In Construction Waste Management: A Systematic Review With Narrative Synthesis For The Libyan Construction Sector, Ramzi Fouzi Hamad Abdullah, Safaa N Saud Al-Humairi, Zunirah Binti Mohd Talib

Journal of Sustainable Construction Materials and Technologies

Integrating sustainable material procurement with construction waste management is essential to reduce construction and demolition waste in Libya, where current practices remain largely reactive and disposal-oriented. This narrative review aims to develop a conceptual framework linking procurement decisions to waste-generation pathways in Libyan construction projects, clarifying how proactive, sustainability-driven purchasing can serve as a primary driver of waste prevention. Using a PRISMA-guided systematic search of Web of Science, Scopus, and IEEE Xplore for 2001–2026, and a bibliometric analysis via VOSviewer, 956 high-quality studies were synthesized to map global knowledge and to expose the paucity of integrated SMP–CWM studies in developing …

Sound Insulation Performance Of Sustainable Lc3 Mortars With Barite And Waste Rubber Aggregates, Begüm Söyek Abay, Leyla Tanaçan

Journal of Sustainable Construction Materials and Technologies

This study investigates the potential of limestone calcined clay cement (LC3) as a sustainable binder for developing a single-layer composite material incorporating barite and rubber aggregates, hypothesized to achieve enhanced sound insulation performance compared to conventional multi-layered wall systems. Mortars were prepared using LC3 with 55% clinker, 30% metakaolin, 15% limestone, substituting 45% of cement clinker. Hybrid mixtures of barite and rubber aggregates (barite-to-rubber volume ratios of 2:1 and 1:2) were tested at aggregate-to-binder ratios of 2.0, 2.75, and 3.5 to evaluate their combined mass and damping effects on acoustic performance. Experiments were conducted to determine physical, mechanical, and acoustic …

From Lime To Geopolymers: Emerging Trends And Advances In Sustainable Soil Stabilization, Favour Chukwuebuka Egwu, Amin Eisazadeh

Journal of Sustainable Construction Materials and Technologies

Soil stabilization remains a critical challenge in geotechnical engineering, particularly for weak and expansive soils that compromise the safety and serviceability of infrastructure. Traditional stabilizers such as lime and cement have been widely applied; however, their limitations in terms of long-term durability, carbon footprint, and performance under aggressive environmental conditions necessitate alternative approaches. In recent years, geopolymer-based stabilizers derived from industrial by-products such as fly ash (FA), slag, and bottom ash (BA) have emerged as promising substitutes. This review critically examines the comparative performance of lime and geopolymer stabilization with respect to strength development, durability, compressibility, environmental impact, and economic …

Investigating The Behavior Of Self-Compacting Concrete Containing Scms And Recycled Fine Aggregates, Sachin Tiwari, Mahakavi P

Journal of Sustainable Construction Materials and Technologies

This study addresses the unresolved gap in quantifying how recycled fine aggregates (RFA) and metakaolin (MK) interact synergistically in self-compacting concrete (SCC), a relationship that previous works have studied only in isolation or without mechanistic justification. Twenty-five SCC mixtures containing MK (0–25%) and RFA (0–100%) were evaluated to generate a unified understanding of fresh behaviour, strength development, pore refinement, interfacial transition zone (ITZ) characteristics, and sustainability indicators. Results show that RFA alone increases water demand and reduces strength, while MK compensates for these losses by densifying the matrix and improving ITZ bonding, as confirmed through SEM analysis. An optimum synergy …

The Effects Of Low-Frequency, Low-Intensity Ultrasound On Gene Expression In Macrophage-Endothelial Cell Co-Culture, Evelyn Hergenhan

Honors Theses

Introduction

Low-frequency, low-intensity ultrasound (LFLI US) has been shown to be a promising treatment for noninvasive accelerated chronic wound healing. However, the biological mechanisms of this ultrasound-assisted healing are not yet understood, limiting clinical adoption. The objective of this study is to characterize the effects of LFLI US on gene expression in a simulated chronic wound environment to gain a better understanding of the biological mechanisms underlying this therapeutic.

Methods

A simulated chronic wound environment consisting of endothelial cells and inflammatory M1 macrophages co-cultured in 3D was subject to LFLI US at 50, 100, or 150 mW/cm² Spatial-Peak, Temporal-Peak …

Stentrx, Emma Barna, Minuthi Cooray, Bruce Newlands, Joseph A. Sabetta

Williams Honors College, Honors Research Projects

This project aims to develop a biodegradable, drug-eluting biliary stent for the treatment of biliary cancers. Current metal stents that restore bile flow bit are non-degradable, prone to migration, and unable to deliver drugs locally. The proposed stent will be biocompatible, biodegradable, and capable of controlled drug release to both maintain bile flow and treat tumors. The end goal is to produce a functional prototype that can be deployed via a minimally invasive catheter and maintain bile duct patency for at least three months. The project is expected to be involved in the NEOMED Bench-to-Bedside competition and provisionally patented.