Biomaterials Commons^™

Development Of Anti-Microbial Nanocoatings On Metallic Surfaces To Prevent Infections, Luis Fernando Soto Garcia

Bioengineering Dissertations - Archive

Healthcare-associated infections have a prevalence of about 7% in the United States and up to 50% in some developing nations. They not only present a constant risk for inpatients and healthcare workers but are also a serious challenge to human health services worldwide. These infections can be transmitted via contaminated non-critical surfaces like doorknobs and bedrails, which are routinely cleaned with low-level disinfectants approved by the U.S. Environmental Protection Agency. However, this strategy has limited efficacy since recontamination occurs, resulting in these surfaces again becoming vectors of infection. In this work, we addressed this issue by developing a self-disinfecting nanocomposite …

Muscle-Nerve Signaling And Its Role In Myogenesis, Synaptogenesis, And Regeneration, James T. Redden

Theses and Dissertations

Despite only comprising 0.1% of the myofiber surface area, a healthy motor endplate is densely packed with acetylcholine receptors (AChRs) responsible for mediating activity between the connected motor neuron and skeletal muscle via the neurotransmitter, acetylcholine. Loss of the endplate, known as fragmentation, is caused by car crashes, deep lacerations, and other traumatic injuries to the innervating nerve or direct injuries to the limb muscle(s) with intramuscular denervation as a common comorbidity. In both cases, endplate fragmentation begins within a week of injury proceeding muscle atrophy causing decreased mobility, paralysis, and quality of life. Endplate fragmentation of intact muscle fibers …

Insights Into The Characterization And Degradation Of Electrospun Polycaprolactone Scaffolds For Tissue Engineering Applications, Caleb B. Wells

Theses and Dissertations

Electrospun polymeric biodegradable scaffolds are essential in tissue engineering, particularly for Engineered Tissue Vascular Grafts (ETVGs), which promise advancements in treating coronary artery disease, peripheral arterial disease, congenital cardiovascular defects, and renal disease. These scaffolds present a solution to issues with autologous graft availability and durability. While large-diameter grafts in low-pressure environments have seen success, small-diameter grafts in high-flow scenarios remain challenging. Understanding polymeric scaffold degradation and behavior during incubation, especially under dynamic mechanical loading, is vital for clinical translation of small-caliber ETVGs.

This research focuses on characterizing the mechanical and microstructural properties of electrospun polycaprolactone (PCL) scaffolds and their …

Development Of Iron Oxide Nanozyme For Cancer Therapy, Zhongchao Yi

Theses and Dissertations--Biomedical Engineering

Cancer therapies that leverage reactive oxygen species (ROS) have shown potential for cancer inhibition due to their ability to induce oxidative stress in tumor cells. Iron oxide nanoparticles (IONPs) have garnered significant attention as a promising platform for ROS-dependent disease treatment, owing to their remarkable biocompatibility and Fenton catalytic activity. However, the low catalytic activity of IONPs has been a major hurdle in their clinical translation. To overcome this challenge, IONPs of different compositions are examined for their Fenton reaction under pharmacologically relevant conditions in this work. The results show that wüstite (Fe_1-xO) nanoparticles exhibit higher catalytic activity …

Mobile Robot Adhesion Methodology And Development Of An Automatous Robot Module, Lauren Baird, Zachariah Stone, Madison Lemons, Jonathon Moody

Williams Honors College, Honors Research Projects

Due to the increasing availability of space travel as not only a scientific exploration but a commercial exploration, there is a need for an onsite repair station that can be deployed in the event of aircraft maintenance, damage, or failure. We have been tasked with researching and creating a prototype of an automatous robot that can be attached to a spacecraft body, move along the surface while avoiding obstacles, scan for damage, 3D print a repair piece, and then make the repair, all without the need of direct human input. Our team, as will be discussed throughout, was tasked with …

Evaluation Of Silk Fibroin And Hylauronic Acid As Otic Drug Delivery System Additives; Investigation Of Silk Fibroins Responses To Enviromental Stimulii, Kolton Charles Sandau

Graduate Student Theses, Dissertations, & Professional Papers

The Serban lab has previously developed and reported on a single application drug delivery system for the treatment of otitis externa. Otitis externa also known as outer ear infections is a very common ailment that impacts large portions of both human and domestic animal populations. Typical treatment for otitis externa typically requires an extended dosing regimen over several days that is inconvenient and can lead to poor clinical outcomes due to poor patient compliance. Our delivery system employs a thixotropic gel to deliver a steady dose of medication over the duration of the infection.

Here we evaluated the reproducibility and …

Engineering Mussel Foot Protein 5 (Mfp5) For Enhanced Adhesive Performance In Tendon And Bone Repair, Ziyue Zhu

McKelvey School of Engineering Graduate Student Theses & Dissertations

This study explores the development of Mussel Foot Protein 5 (MFP5) bioadhesives to improve tendon-to-tendon and tendon-to-bone adhesive outcomes. MFP5, known for its underwater adhesive properties, was synthesized using recombinant techniques and optimized through coacervation and cross-linking. Adhesion tests demonstrated the superior performance of the optimized MFP5 adhesive on the tendon and bone samples. Improved protein concentration testing and purification methods enhanced MFP5 yield and consistency. Future research will focus on further standardization, exploring alternative purification methods, and evaluating the adhesive's performance in animal models. This study lays a foundation for developing robust MFP5-based bioadhesives, potentially revolutionizing surgical repair techniques …

Matrix Stiffness Sensing By Nascent Adhesions And The Role Of Riam In Adhesion Assembly, Nikhil Mittal

Dissertations, Master's Theses and Master's Reports

Mechanical stiffness of the extracellular matrix (ECM) impacts many cellular functions such as proliferation, migration, and differentiation. ECM stiffness is sensed by a cell via integrin-based focal adhesions (FAs) by changing conformation and biochemical activities of molecules within FAs by the exchange of the force between the ECM and filamentous actin (F-actin). Cells in turn respond to this stiffness by generating traction force that plays an important role in many biological events such as tissue morphogenesis, stem cell differentiation, wound healing, and cancer cell metastasis. The stiffness of the extracellular matrix induces differential tension within integrin-based adhesions. Understanding stiffness sensing …

Multi-Functional Gelatin-Dithiolane Hydrogels For Tissue Engineering, Saad Asim

Dissertations, Master's Theses and Master's Reports

Biomaterials that integrate multiple functionalities, mimic the extracellular matrix (ECM) microenvironment to support cellular growth, and adhere robustly to damaged tissues are highly needed to advance tissue engineering. Protein-based biomaterials are promising due to their inherent biocompatibility, biomimicry, biodegradation, and cell-supportive properties. Herein, by leveraging the unique ability of dithiolanes to generate on-demand in-situ thiols, we developed a new class of dithiolane-modified, protein-based biomaterial that combines unique, seemingly opposing functions for tissue engineering. Dithiolane-modified gelatin, a model protein used herein, enabled photoinitiator-free photo-crosslinking to form multi-functional gelatin-dithiolane (GelDT) hydrogels, which displayed exceptional long-term stability in cell culture media (>28 …

4d Epr Oximetry Imaging For 4d Bioprinting And Tissue Engineering, Sajad Sarvari

Graduate Theses, Dissertations, and Problem Reports (ETD)

Bioprinting, akin to 3D printing, employs cell-laden hydrogels such as GelMA (Gelatine Methacrylate) and Alginate instead of plastic or resin to create biological structures. The printing process followed by subsequent tissue maturation is known as 4D bioprinting, where the fourth dimension is time. Ensuring adequate and consistent oxygen, O2, supply within 3D bioprint volume over the entire maturation period process is crucial, as even transient hypoxia can impact cellular behavior and phenotypes. However, printing of fully developed vasculature remains an unresolved technical challenge. Several approaches to chemically (peroxides) or biologically (photosynthesis) generate oxygen during bioprint maturation have been proposed. However, …

Degradable Staples And Delivery Device, Meha Elango, Jessica Cabrera, Makayla Scarpitti, Kareemat Melaiye

Williams Honors College, Honors Research Projects

The scope of this project is to design a method to secure skin grafts to healthy tissue. The ultimate goal for the proposed method is to be dissolvable in some form. Currently, skin grafts procedures utilize staples in most cases to hold a skin graft in place, but there are disadvantages that come with it. Staples are easy to place, but time consuming during the removal procedure. They also cause a lot of pain and discomfort for the patient. The goal of this project is to determine a way a secure skin grafts to healthy skin in order to reduce …

Development Of Glutathione-Responsive Disulfide-Containing Poly(Beta-Amino Esters) With Varied Hydrophilicity And Acrylate Functionality, Anastasiia Aronova

Theses and Dissertations--Chemical and Materials Engineering

Smart biomaterials are becoming promising for therapeutic deliveries due to their ability to respond to changes in the environment. Redox-responsive hydrogels are a promising type of smart polymer that can swell and degrade according to cellular oxidative stress levels. Glutathione, abundant in cells, is crucial in redox-responsive biomaterials, serving as a key reactive molecule. This study explored the degradation kinetics of glutathione-responsive poly(β-amino ester) (PBAE) polymers created through a single-step Michael addition. We examined how disulfide content influences the degradation kinetics of these PBAE networks. Additionally, we investigated how the hydrophilicity and functionality of acrylate affect the degradation of disulfide-containing …

Sustained Release Systems For Endometrial Cancer, Claire E. Rowlands

Theses and Dissertations--Chemical and Materials Engineering

Endometrial cancer (EC) is the sixth most common cancer in women worldwide and is the most common cancer of female reproductive organs. From 2007-2016 there has been a global rise in incidence of EC of 1.3 %. Typically, EC is treated with surgery, but at later stages surgery is less effective requiring chemotherapy and/or radiation therapy. These treatment options are less effective than surgery and there are very few FDA approved chemotherapies for EC. The minuscule number of effective treatment options as well as an increase in incidence shows the need for creating improved treatments for EC. There has been …

Borophene And Graphene For Non-Enzymatic Biosensor- Ab-Initio Study, Omar A. Ismail

Theses and Dissertations

Non-enzymatic glucose sensing holds promise to overcome limitations associated with glucose oxidase, such as oxygen dependence and short shelf life. This study explores the potential sensing capabilities of borophene and graphene through direct interaction with various compounds, including β-glucose, uric acid, ascorbic acid, fructose, and acetaminophen. Using Density Functional Theory (DFT), we calculated binding energies and the respective Density of States (DOS) for these adsorbates on both graphene and borophene surfaces. Preliminary results suggest that borophene might exhibit nearly twice the affinity for β-glucose compared to graphene. Moreover, the calculated Density of States reveals distinct distortions in the electronic states …

Adjuvant Pluronic F68 Is Compatible With A Plant Root-Colonizing Probiotic, Pseudomonas Chlororaphis O6, Amanda R. Streeter, Anthony Cartwright, Mohammad Zargaran, Anagha Wankhade, Anne J. Anderson, David W. Britt

Biological Engineering Faculty Publications

Plant probiotic bacteria are being increasingly used to maximize both the productivity and quality of field crops. Pseudomonas chlororaphis O6 (PcO6) is a plant root colonizer with probiotic activities. This bacterium produces an array of metabolites, including a group of phenazines that are functional in plant protection. The paper reports responses of PcO6 to a nonionic triblock copolymer surfactant, Pluronic F68. This Pluronic exhibits membrane "healing" activity and improves cryopreservation recovery in eukaryotic cells. The product is FDA-approved and is applied as an adjuvant in formulations used in agriculture, medicine, and biotechnology. Growth of PcO6 on …

Getting Off On The Right Foot: Addressing Severe Lymphedema Through A Novel Shoe Design, Carl R. Russell Iii, Anjollie M. Ramakrishna, Christopher H. Johns Iii, Alana V. Van Wijnen

Purdue Journal of Service-Learning and International Engagement

Engineering Projects in Community Service (EPICS) is a service-learning design program run by the College of Engineering at Purdue University. EPICS teaches students design skills by providing solutions for individuals, communities, and organizations in the surrounding area while mirroring engineering industry standards. Biomedical Engineering is a team within EPICS that strives to serve community partners through biomedical applications. HR is a patient who suffers from severe lymphedema. This condition results in her foot swelling three times its original size and requires her to utilize weekly leg compression therapy. Prescription shoes are slightly adequate. However, they lead to sores and pain …

Air-Jet Bioprinting Of Stem Cell-Encapsulated Alginate Micro-Droplets For Organoid Biomanufacturing, Mirabella B. Stump

Electronic Theses and Dissertations

Biomanufactured 3D-organoids show promise for modeling and treating various conditions, particularly insulin-dependent diabetes mellitus (type-1 diabetes). Pancreatic islet organoids serve as sustainable sources of insulin-producing β-cells, potentially restoring insulin regulation in patients and providing a long-term solution for diabetes. Hydrogel droplet printing is an emerging technique in regenerative medicine due to its advantageous tunability and biocompatibility; however, challenges of consistency, quality control, and scalability persist. To address these issues, we developed a novel air-jetting based droplet bioprinting system for the generation of monodispersed alginate micro-droplets. The objective of this project was to incorporate human induced pluripotent stem cells (hiPSCs) into …

Evaluation Of Polyvinyl Alcohol (Pva) For Electrospinning Utility In The Blood Vessel Mimic (Bvm) Lab, Logan Vandenbroucke

Master's Theses

Electrospinning has provided the opportunity to create extracellular matrix (ECM) mimicking scaffolds for the development of tissue-engineered constructs. Within Professor Kristen Cardinal’s Blood Vessel Mimic (BVM) Lab, at Cal Poly, there exists a constant demand for innovation and the expansion of polymer types and electrospinning capabilities for its BVM model. Along these lines, the BVM Lab has recently acquired two new electrospinning systems: the Spinbox, a commercially graded electrospinning system, and the Learn-By-Doing system, which was part of a recently completed thesis conducted by Jason Provol. Additionally, recently published literature has demonstrated polyvinyl alcohol (PVA) as a viable option for …

Ti-6al-4v Β Phase Selective Dissolution: In Vitro Mechanism And Prediction, Michael A Kurtz

All Dissertations

Retrieval studies document Ti-6Al-4V β phase dissolution within total hip replacement systems. A gap persists in our mechanistic understanding and existing standards fail to reproduce this damage. This thesis aims to (1) elucidate the Ti-6Al-4V selective dissolution mechanism as functions of solution chemistry, electrode potential and temperature; (2) investigate the effects of adverse electrochemical conditions on additively manufactured (AM) titanium alloys and (3) apply machine learning to predict the Ti-6Al-4V dissolution state. We hypothesized that (1) cathodic activation and inflammatory species (H₂O₂) would degrade the Ti-6Al-4V oxide, promoting dissolution; (2) AM Ti-6Al-4V selective dissolution would occur …

Engineering Next-Generation Cardiovascular Therapies, Ryan Walker Barrs

All Dissertations

Cardiovascular diseases are the leading cause of death worldwide. Heart disease, in particular, accounted for 1 in every 5 deaths in the United States in 2021, representing a substantial public health burden that will require more effective treatment options to alleviate. Heart transplant surgery is currently the only option to completely restore cardiac function, but many patients die while waiting for a transplant due to a longstanding organ donor shortage. Thus, there is a dire need for accessible treatment options that can repair damaged hearts. Recent advances in tissue engineering and regenerative medicine have accelerated the development of therapies for …