Biomaterials Commons^™

Transcriptome Profiling Of A Synergistic Volumetric Muscle Loss Repair Strategy, Kevin Roberts, John Taehwan Kim, Jacob Schluns, Grady Dunlap, Jamie Hestekin, Jeffery Wolchok

Biomedical Engineering Faculty Publications and Presentations

Volumetric muscle loss overwhelms skeletal muscle’s ordinarily capable regenerative machinery, resulting in severe functional deficits that have defied clinical repair strategies. In this manuscript we pair the early in vivo functional response induced by differing volumetric muscle loss tissue engineering repair strategies that are broadly representative of those explored by the field (scaffold alone, cells alone, or scaffold + cells) to the transcriptomic response induced by each intervention. We demonstrate that an implant strategy comprising allogeneic decellularized skeletal muscle scaffolds seeded with autologous minced muscle cellular paste (scaffold + cells) mediates a pattern of increased expression for several genes known …

Decellularized Heart Extracellular Matrix As A Biomimetic Substrate For Alleviating Hipsc-Cardiac Fibroblast Activation And Enhancing Isogenic Cardiac Organoids, Charles Kerr

MUSC Theses and Dissertations

Cardiovascular disease is the constant leading cause of death worldwide. While substantial efforts have been undertaken to improve disease outcomes, the lack of adequate human cardiac tissue models exacerbates research and development costs and clinical trial failures, hampering novel therapeutic discovery. To address this, human engineered cardiac microtissues composed of human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CM) show potential in recapitulating hallmark qualities of natural human myocardium for novel therapeutic testing, disease modeling and cardiotoxicity screening. However, as these models are engineered in vitro, they are limited in their capacity to fully recapitulate myocardium and are vulnerable to influences …

Histological Evidence For The Therapeutic Effect Of Chitosan Nanofibrous Dressing On Acute Skin Wounds In A Rat Model, Mahboubeh Ghanbari, Sayed Ahmadreza Razian, Sara Cartwright, Yury Salkovskiy, Jason Mactaggart, Mark A. Carlson

UNO Student Research and Creative Activity Fair

Introduction: Large-area skin traumas, such as thermal burns, are among the most severe health issues that decrease patients’ quality of life and burden healthcare systems. The CDC estimates that there are 1.1 million burns requiring medical attention each year, with more than 20,000 cases involving at least 25% of the body surface, resulting in 4,500 deaths. In addition, about 10,000 people die from burn-related infections. A promising solution to alleviate this problem is using wound dressings based on biopolymers with inherent wound healing properties and biodegradability. One of these biopolymers is chitosan, which is derived from arthropod shells and exhibits …

Effect Of Blank Moisture Content On Forming Behaviour And Mechanical Properties Of Paperboard Tray Packages, Arvo Niini, Lena Berthold, Tobias Müller, Panu Tanninen, Jens-Peter Majschak, Juha Varis, Ville Leminen

Journal of Applied Packaging Research

Tray blanks were moisturised to study the effect of different blank moisture content levels on forming behaviour and mechanical properties of paperboard tray packages. The blank moisturisation was done by spraying water to the blanks before their three-dimensional (3D) forming. The trays were 3D formed by press forming or deep drawing. Visual quality and punch force values were used as indicators to evaluate the forming behaviour of the trays. The mechanical properties of the trays were investigated with compression, torsion, and storing tests. A high blank moisture content reduced the punch force, and the elevated blank moisture was connected to …

Advanced Microstructural Characterization Of Functionally Graded Dental Ceramic Material For Materials-Informed Finishing, Angani Vigneswaran

Theses and Dissertations--Manufacturing Systems Engineering

Yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) has gained popularity as the choice of material for dental prosthetics. Ivoclar Vivadent’s IPS e.max ZirCAD Prime dental ceramic incorporates a unique gradient technology that varies the yttria content over the thickness of the material. The top layer is composed of 5Y-TZP which is desired for its optical properties while the bottom layer is composed of a much stronger 3Y-TZP. In between the two layers, 5Y-TZP and 3Y-TZP are mixed to form a transition layer. Varying the amount of yttria allows for more esthetically pleasing translucency in the visible areas of the restoration without compromising …

An Experimental Study On The Mechanical Properties And Chemical Composition Of Lcd 3d Printed Specimens, Sebastian Gomez

College of Graduate Studies: Theses & Dissertations

Additive manufacturing technologies have been enhanced throughout the years yet have surprised the manufacturing industry due to their high-end surface finish and dimensional accuracy. Different experiments have been done to identify a specific phenomenon known in the vat-polymerization field. Distortion and dimensional inaccuracy tend to affect the overall properties of the process, either physical or chemical. This approach allows the understanding of how the physical properties have been affected and how to study the chemical properties to avoid this type of phenomenon. The chemical reaction between polymer and UV light has been studied and experimented with to the point that …

An Experimentally Validated Computational Model For The Degradation And Fracture Of Magnesium-Based Implants In A Chemically Corrosive Environment, Mark M. Ousdigian

Dissertations, Master's Theses and Master's Reports

In the orthopedic and cardiovascular fields there is a growing interest for biodegradable implants, which can be naturally degraded in the body environment over time so that no extraction surgery is required. These implants must be designed to maintain their strength until the fracture has healed in the body, which could be influenced by many factors such as -the patient’s age, activities, body weight, pre-existing conditions etc. Hence, an ideal implant design should be done on a patient-by-patient basis. In the present work, a computational model is developed to predict the degradation and fracture of magnesium-based implants in a stress-coupled …

3-Dimensional Muscle Constructs: Using Hydrogels In Order To Model The Effects Of Exercise In Disease Conditions, Mark Mchargue

Theses and Dissertations--Biomedical Engineering

Currently, there is no standard in vitro model for studying the effects of mechanical stimulation on muscle in type II diabetes. Existing models primarily utilize electrical stimulation, which does not fully recapitulate the effects of exercise. In this thesis, we create a standardized in vitro model of murine muscle that can recapitulate the benefits seen in exercise when mechanically stimulated. Moreover, we show that a type II diabetes environment has similar effects on the muscle in vitro as well as in vivo.

Sodium Hyaluronate Based Drug Delivery To The Outer And Inner Ear, Emma Barrett-Catton

Graduate Student Theses, Dissertations, & Professional Papers

We have developed two projects using sodium hyaluronate (HA)-based systems for drug delivery to the ear. First, we investigated an HA-based hydrogel for use as a single use antibiotic treatment for otitis externa. Otitis externa, also known as outer ear infection, is a frequent affliction in both humans and animals. The most prevalent treatment for otitis externa is ear drops, but it is difficult to adhere properly to this treatment, causing poor patient compliance and the potential for complications. As a result, we have developed an HA-based hydrogel for use as a single application treatment for otitis externa to increase …

Development Of A Solution Synthesis Of Poly(Sebacic Anhydride) With The Activating Agent 4-Toluenesulfonyl Chloride: Understanding The Effect Of Different Bases On The Reaction Products, Patricia Poley

Honors Theses

The overall goal of this honors thesis was to develop a solution synthesis of Poly(Sebacic Anhydride) with the activating agent 4-toluenesulfonyl chloride and understand the effects of varying temperature, bases, and the addition order of reagents on the reaction.

Polyanhydrides are a class of hydrophobic, degradable polymers used in controlled drug delivery for 30 years. They are synthesized through three general methods: melt polycondensation, solution polycondensation, and ring-opening polymerization. Of these three methods, solution polycondensation typically results in products with lower molecular weight. Previous work in the Vogel lab identified two new ways to synthesize anhydrides using solution polycondensation reactions …

Nanomaterials For Cardiovascular Engineering, Roya Bagheri

Dissertations, Master's Theses and Master's Reports

Cardiovascular diseases and disorders (i.e., those related to heart and blood vessels) are the main reasons for mortality worldwide. Nanomaterials, with their unique morphologies and properties, have a great potential for advancing cardiovascular engineering to treat diseases and disorders. In this dissertation, several cardiovascular applications of conductive nanomaterials were investigated. First, a conductive nanomaterial was explored to fabricate biohybrid nanomaterial-cardiomyocyte (CM – heart muscle cell) systems. Using Carbon Nanotube (CNT) forest as a 3D porous and conductive scaffold was investigated. The influence of the CNT forest on the viability, attachment, and spreading of CMs and their genetic information was …

The Wound Healing And Antibacterial Properties Of Mesenchymal Stromal Cell Extracellular Matrix Nanoparticles, Emily N. Wandling

Theses and Dissertations

Treatments for acute respiratory distress syndrome (ARDS) are still unavailable and the prevalence of the disease has only increased due to the Covid-19 pandemic. Mechanical ventilation regiments are still utilized to support declining lung function, but they also contribute to lung damage and increase the risk of bacterial infection. The anti-inflammatory and pro-regenerative abilities of mesenchymal stromal cells (MSCs) have shown to be a promising therapy for ARDS. We propose to utilize the regenerative effects of MSC secretome and the extracellular matrix (ECM) into a nanoparticle. Our mouse MSC (MMSC) ECM nanoparticles were characterized using size, zeta-potential, and mass spectrometry …

Leveraging Cell-Substrate Adhesion And Cell Migratory Properties In Skeletal Muscle Constructs And Cancer Metastasis Assays, Lauren E. Mehanna

Theses and Dissertations--Chemical and Materials Engineering

Volumetric muscle loss (VML) remains one of the few skeletal muscle injuries without a reliable and repeatable treatment. In large volume muscle injuries, muscle fibers as well as the surrounding connective tissue are damaged, preventing therapeutic muscle stem cells, called myogenic progenitor cells (MPCs), from reaching the injury site and initiating repair. There is a clinical need to rapidly fabricate in vitro muscle tissue constructs that mimic the native tissue organization, with aligned myotubes, for insertion and integration at the patient’s injury site. In this dissertation, we utilize the MPC’s natural propensity to close gaps across an injury site to …

Finite Element Analysis Of 3d-Printed Pcl Scaffolds, Ireolu K. Orenuga, Joao Soares, Phillip D. Glass, Daeha Joung Ph.D.

Undergraduate Research Posters

Finite Element Analysis of 3D-printed PCL Scaffolds for Synergizing Cellular Micro-Environment and Mechanical Stimuli to Enhance Engineered Tissue Growth in Vitro

Ireolu Orenuga,1 Phillip Glass,2 Daeha Joung,2 Joao S. Soares1

1. Department of Mechanical and Nuclear Engineering, College of Engineering, Virginia Commonwealth University
2. Department of Physics, College of Humanities & Sciences, Virginia Commonwealth University

Introduction: Tissue engineering aims to create viable and functional engineered tissues via biodegradable scaffolds and autologous cells. Scaffolds play an essential part in organizing the architecture of developing tissues and aid in the proper function of implants acutely by serving as mechanical support and long-term by …

A Novel Biomaterial Platform For Cardiac Tissue Engineering, Andrew House

Dissertations

Heart disease is one of the leading causes of death in the world. With a growing demand for in vitro cardiac models that can recapitulate the complex physiology of the cardiac tissue, there is a desire to create novel therapies and treatments. However, due to a lack of fundamental understanding of the heart's inflammatory response to myocardial infarction, the development of new therapies is both time consuming and costly. In this work, a novel approach to fabricating a dynamic hydrogel cardiac platform is reported. This platform better mimics the dynamic changes occurring in the native cardiac tissue microenvironment during cardiac …

Development Of A Crosslinked Osteochondral Xenograft And A Collagen Stabilizing Intra-Articular Injection To Remediate Cartilage Focal Lesions To Prevent Osteoarthritis, Mark Lewis Mosher

Theses and Dissertations

Osteoarthritis is one of the most common causes of disability in adults in America. It is a progressive and degenerative disease where the articular cartilage is broken down and lost from the surfaces of bones causing chronic pain and swelling in the joints, and currently has no cure. The most commonly osteoarthritis starts from a focal lesion on the cartilage surface, which will expand on the surface and downwards through the thickness of the tissue. The current gold standard for correcting cartilage focal lesions is the osteochondral autograft/allograft transplantation (OAT), which replaces the defect with a fresh osteochondral graft. The …

Highly Adherent Antimicrobial Coatings For Orthopedic Implants, Mikhail Bredikhin

All Dissertations

Fracture-related infections (FRIs) are the most devasting sort of complications associated with fracture fixation devices, as they lead to patients’ morbidity, prolonged hospitalization, amputations, and even death.External fixators additionally suffer from pin site infections (PSIs), which initiate at the skin entry points of the skin-metallic pin interface present in the external fixation of the damaged bones, often causing deep tissue infection and osteomyelitis. Small percutaneous pins, commonly known as Kirschner wires (K-wires), are used to treat complex fractures and deformities.They are drilled inside the diseased bone for the healing period and are left protruding outside the skin for fixation adjustments …

Development Of Enzyme-Responsive Polymersomes As A Drug Delivery System For Gm1 Gangliosidosis, Bipin Chakravarthy Paruchuri

All Dissertations

GM1 gangliosidosis is a lysosomal storage disorder caused by deficiency of β-galactosidase (βgal) and subsequent accumulation of GM1 ganglioside in lysosomes. The rare nature of this disorder presents challenges with prognosis and treatment. Enzyme replacement therapy (ERT) can effectively treat systemic deficiencies, but the intravenously administered enzyme cannot cross the blood-brain barrier (BBB) to treat the central nervous system. A delivery system to encapsulate and deliver the enzyme can facilitate enzyme transport across the BBB with suitable surface modifications. One of the pathological aspects of GM1-affected cells is the upregulation of the lysosomal enzyme hexosaminidase A (HexA). In this dissertation, …

An Integrated Electronic-Skin Patch For Real-Time And Continuous Monitoring Of A Panel Of Biomarkers Combined With Drug Delivery, Tanzila Noushin

Electrical Engineering Theses

Inflammatory biomarkers present in the human body play a vital role in medical field by guiding the clinician in decision-making for many diseases. The levels of these inflammatory biomarkers are associated with the severity and progress of several diseases. Researchers have found that increasing severity of many diseases such as cardiovascular disease, after surgery infection, and adverse clinical outcomes due to infectious diseases, results in the elevation of the level of inflammatory biomarkers in human sweat. Furthermore, the inflammatory cytokines indicate the pathophysiology and prognosis of critically ill SARS‑CoV‑2 patients. In this thesis work, different sensors have been developed for …

Material Characterization And Comparison Of Sol-Gel Deposited And Rf Magnetron Deposited Lead Zirconate Titanate Thin Films, Katherine Lynne Miles

Mechanical Engineering ETDs

Lead zirconate titanate (PZT) has been a material of interest for sensor, actuator, and transducer applications in microelectromechanical systems (MEMS). This is due to their favorable piezoelectric, pyroelectric and ferroelectric properties. While various methods are available to deposit PZT thin films, radio frequency (RF) magnetron sputtering was selected to provide high quality PZT films with the added capability of batch processing. These sputter deposited PZT films were characterized to determine their internal film stress, Young’s modulus, composition, and structure. After characterization, the sputtered PZT samples were poled using corona poling and direct poling methods. As a means of comparison, commercially …