Open Access. Powered by Scholars. Published by Universities.®

Biomaterials Commons

Open Access. Powered by Scholars. Published by Universities.®

666 Full-Text Articles 1,252 Authors 632,953 Downloads 85 Institutions

All Articles in Biomaterials

Faceted Search

666 full-text articles. Page 19 of 31.

Investigating Virus Clearance Via Ph Inactivation During Biomanufacturing, Wenbo Xu 2019 University of Arkansas, Fayetteville

Investigating Virus Clearance Via Ph Inactivation During Biomanufacturing, Wenbo Xu

Biomedical Engineering Undergraduate Honors Theses

In the processing of biopharmaceuticals, viral clearance and viral safety are important for the development of monoclonal antibodies. Murine xenotropic leukemia virus (XMuLV) is one of the retroviruses, recommended by Food and Drug Administration (FDA) as a model virus for viral clearance via inactivation from therapeutics derived from Chinese hamster ovary cells (CHO). A robust and effective method was investigated to clear or inactivate endogenous viruses by low pH inactivation. The effects of different conductivity and inactivated time on XMuLV clearance was determined. Acetate buffer was prepared with different conductivity, and 2% XMuLV was spiked into acetate buffer. XMuLV virus …


Effect Of Polymer Composition Of Injectable Hydrogels On Programmable Release Of Methylene Blue, Mary Brandecker 2019 University of Arkansas, Fayetteville

Effect Of Polymer Composition Of Injectable Hydrogels On Programmable Release Of Methylene Blue, Mary Brandecker

Biomedical Engineering Undergraduate Honors Theses

Temperature sensitive hydrogels have been used as injectable hydrogels because the polymer solutions can be liquid at room temperature and gel at body temperature. Injectable hydrogels have been used in biomedical applications to deliver drugs and other small molecules throughout the body. Methylene Blue was used as the drug in this study for its antioxidant and neuroprotective properties. PluronicⓇ F127 (PF127) is a copolymer consisting of repeating units of polyethylene oxide and polypropylene oxide in the form PEO-PPO-PEO. PF127 in solution is a temperature sensitive hydrogel that transitions to a gel at body temperature at specific polymer compositions. A standard …


Design Of Microporous Membranes For The Development Of Brain-On-Chip Devices, Andre Figueroa Milla 2019 University of Arkansas, Fayetteville

Design Of Microporous Membranes For The Development Of Brain-On-Chip Devices, Andre Figueroa Milla

Biomedical Engineering Undergraduate Honors Theses

Traumatic brain injuries (TBIs) are a major global health concern that have an economic impact of $60 billion in the United States in related costs annually. Developing drugs for TBI treatment is an approach that currently faces limitations involving the permeability of the blood-brain barrier (BBB). The BBB naturally limits molecules from reaching the brain as a protective mechanism against disease, acting as a barrier during drug delivery. Understanding the BBB mechanically and chemically following a TBI could potentially assist future studies to alleviate the symptoms and long-term effects of TBI by pharmaceuticals. The Mechanobiology and Soft Materials Laboratory (MSML) …


Primitive Palms: A Density Study On The Impacts Of Harvesting Natural Materials For Construction Purposes On Sumak Allpa Of The Amazon Rainforest, Zachary Bull 2019 SIT Study Abroad

Primitive Palms: A Density Study On The Impacts Of Harvesting Natural Materials For Construction Purposes On Sumak Allpa Of The Amazon Rainforest, Zachary Bull

Independent Study Project (ISP) Collection

In an effort to better understand how rural construction techniques affect a surrounding environment, this study combines a density test of the natural building materials used in the construction of a school on Sumak Allpa island of the Orellana Province in the Amazon basin of Ecuador. The focus of the study measures the density of the bamboo species Guadua angustifolia and the Panama hat plant Carludovica palmata on the island while noting a comprehensive compilation of the techniques and materials used in the building process. Using a mix of plots and transects, a comparison of harvested material to remaining material …


Suture-Less Trocar Site Closure Clip, Hares A. Patel 2019 University of Louisville

Suture-Less Trocar Site Closure Clip, Hares A. Patel

Electronic Theses and Dissertations

Introduction: Following laparoscopic surgery, there is a need, in many cases, to close trocar sites to prevent hernias. Currently, devices that exist on the market are suture based, but the lack of standardization in the suturing techniques together with the time-consuming nature of the procedure leads to the need for improvement in trocar site closure products. Trocar closure sites do not need to be fully closed on the fascial layer; rather, sufficiently blocking the hole at the abdominal wall can significantly reduce post-operative herniation. A retrospective study on trocar site herniation (TSH) after laparoscopic surgery indicates a TSH incidence …


The Effect Of Defects And Surface Modification On Biomolecular Assembly And Transport, Haneen Martinez 2019 University of New Mexico - Main Campus

The Effect Of Defects And Surface Modification On Biomolecular Assembly And Transport, Haneen Martinez

Nanoscience and Microsystems ETDs

Nanoscale transport using the kinesin-microtubule (MT) biomolecular system has been successfully used in a wide range of nanotechnological applications including self-assembly, nanofluidic transport, and biosensing. Most of these applications use the ‘gliding motility geometry’, in which surface-adhered kinesin motors attach and propel MT filaments across the surface, a process driven by ATP hydrolysis. It has been demonstrated that active assembly facilitated by these biomolecular motors results in complex, non-equilibrium nanostructures currently unattainable through conventional self-assembly methods. In particular, MTs functionalized with biotin assemble into rings and spools upon introduction of streptavidin and/or streptavidin-coated nanoparticles. Upon closer examination of these structures …


Deswelling Induced Morphological Changes In Dual Ph And Temperature Responsive Ultra-Low Crosslinked Poly (N-Isopropyl Acrylamide)-Co-Acrylic Acid Microgels, Molla R. Islam, Maddie Tumbarello, L. Andrew Lyon 2019 Chapman University

Deswelling Induced Morphological Changes In Dual Ph And Temperature Responsive Ultra-Low Crosslinked Poly (N-Isopropyl Acrylamide)-Co-Acrylic Acid Microgels, Molla R. Islam, Maddie Tumbarello, L. Andrew Lyon

Engineering Faculty Articles and Research

Poly(N-isopropylacrylamide) microgels prepared without exogenous cross-linker are extremely “soft” as a result of their very low cross-linking density, with network connectivity arising only from the self-crosslinking of pNIPAm chains. As a result of this extreme softness, our group and others have taken interest in using these materials in a variety of bioengineering applications, while also pursuing studies of their fundamental properties. Here, we report deswelling triggered structural changes in poly(N-isopropylacrylamide-co-acrylic acid) (ULC10AAc) microgels prepared by precipitation polymerization. Dynamic light scattering suggests that the deswelling of these particles not only depends on the collapse of …


The Endocytotic Fate Of A Mesoporous Silica Nanoparticle Supported Lipid Bylayer Crispr Delivery Vehicle, Angelea Maestas-Olguin 2019 University of New Mexico - Main Campus

The Endocytotic Fate Of A Mesoporous Silica Nanoparticle Supported Lipid Bylayer Crispr Delivery Vehicle, Angelea Maestas-Olguin

2019 Award Winners

No abstract provided.


The Transcriptional Response Of Phanerochaete Chrysosporium And Trametes Versicolor To Growth On Stems Of Helianthus Argophyllus (Silverleaf Sunflower), Nadh Hamoud Alsubaie 2019 Eastern Illinois University

The Transcriptional Response Of Phanerochaete Chrysosporium And Trametes Versicolor To Growth On Stems Of Helianthus Argophyllus (Silverleaf Sunflower), Nadh Hamoud Alsubaie

Masters Theses

Traditional physicochemical and physicomechanical pretreatment technologies have improved the deconstruction of lignocellulose, but often require high energy inputs and added chemical reagents. Recent studies have demonstrated the use of white-rot fungi as alternative biological pretreatment agents that can mitigate these concerns. Although, white-rot fungi have been shown to grow on a variety of non-woody substrates, they have not been explored with respect to sunflower, which has the potential to provide raw materials for both biodiesel and bioethanol. In the present study, Silverleaf sunflower stems (Helianthus argophyllus) were used as substrates for the white-rot fungi Phanerochaete chrysosporium and Trametes …


Engineering The Alveolar Gas Exchange Barrier With Extracellular Matrix Coatings For Bioengineered Lungs, Bethany M. Young 2019 VCU

Engineering The Alveolar Gas Exchange Barrier With Extracellular Matrix Coatings For Bioengineered Lungs, Bethany M. Young

Theses and Dissertations

Lower respiratory diseases are currently the third leading cause of death worldwide. For many end-stage patients with these diseases, there is no cure and a shortage of donor organs available for transplant. A promising solution is to design regenerative scaffolds or complete bioengineered lungs, using decellularized lung tissues as a template for regeneration. Recent advances in the field have made significant strides towards developing a transplantable lung. However, the current technology has not produced a functional lung for in vivo transplant due to immature gas exchange barriers. The mechanisms driving alveolar barrier maturation and role that extracellular matrix (ECM) plays …


Degradable Zinc Material Characteristics And Its Influence On Biocompatibility In An In-Vivo Murine Model, Roger J. Guillory II 2019 Michigan Technological University

Degradable Zinc Material Characteristics And Its Influence On Biocompatibility In An In-Vivo Murine Model, Roger J. Guillory Ii

Dissertations, Master's Theses and Master's Reports

Biodegradable stents based on zinc have been under development since their introduction in 2013. While metallic zinc is highly ductile, it unfortunately lacks the mechanical strength required for arterial stents. This has led to the development of an abundance of novel zinc-based materials, with the aim of improving the mechanical strength without sacrificing too much ductility. Although these materials are intended to function and slowly degrade within an artery, most zinc-based materials have been developed without deep consideration for their biological effects.

The present work explores the biological effects elicited by zinc-based materials implanted within the arterial system. The biological …


Designing Biomimetic Implant Surfaces To Promote Osseointegration Under Osteoporotic Conditions By Revitalizing Mechanisms Coupling Bone Resorption To Formation, Ethan M. Lotz 2019 Virginia Commonwealth University

Designing Biomimetic Implant Surfaces To Promote Osseointegration Under Osteoporotic Conditions By Revitalizing Mechanisms Coupling Bone Resorption To Formation, Ethan M. Lotz

Theses and Dissertations

In cases of compromised bone remodeling like osteoporosis, insufficient osseointegration occurs and results in implant failure. Implant retention relies on proper secondary fixation, which is developed during bone remodeling. This process is disrupted in metastatic bone diseases like osteoporosis. Osteoporosis is characterized low bone mass and bone strength resulting from either accelerated osteoclast-mediated bone resorption or impaired osteoblast-mediated bone formation. These two processes are not independent phenomena. In fact, osteoporosis can be viewed as a breakdown of the cellular communication connecting bone resorption to bone formation. Because bone remodeling occurs at temporally generated specific anatomical sites and at different times, …


Modification Of Lipid Microenvironments On Solid Support Structures For Use In Transmembrane Protein Assays, William J. Houlihan 2019 CUNY City College

Modification Of Lipid Microenvironments On Solid Support Structures For Use In Transmembrane Protein Assays, William J. Houlihan

Dissertations and Theses

Gamma-Secretase (γ-secretase) is a transmembrane protease of increasing interest, which has been shown to have significant connections to both cancer and Alzheimer’s disease. γ-secretase cleaves both Notch-1, a transmembrane signaling protein, and Amyloid precursor protein (APP), a transmembrane protein whose cleavage may result in the formation of β-amyloid plaques in the brain. Notch-1 and APP are widely studied proteins that have substantial impacts on the development and proliferation of cancer and Alzheimer’s disease, respectively. Notch-1 partakes in the signaling of apoptosis in damaged and mutated cells, thus its cleavage by γ-secretase within the plasma membrane has ramifications on cell growth …


Design And Mechanical Characterization Of 3d Printed Gradient Porosity Poly(Propylene Fumarate) Scaffolds, Andrea Felicelli 2019 The University of Akron

Design And Mechanical Characterization Of 3d Printed Gradient Porosity Poly(Propylene Fumarate) Scaffolds, Andrea Felicelli

Williams Honors College, Honors Research Projects

Worldwide incidence of bone disorders and conditions, an already prevalent problem, is expected to double by 2020 from the rate in 2013 due to factors such as higher life expectancies and lower levels of physical activity. Every year in the United States, over half a million patients receive bone defect repairs, with costs greater than $2.5 billion. Current repairs are typically done with bone grafts, which are often costly and can result in added complications in the donor surgical site. Tissue engineering, a growing field that seeks to assist and enhance tissue defect repairs through the use of synthetic materials, …


The Production And Characterization Of Chitosan Based Microgels Using A Novel Microfluidic Device To Promote Cell Survival, Kaileen Shevchuk 2019 The University of Akron

The Production And Characterization Of Chitosan Based Microgels Using A Novel Microfluidic Device To Promote Cell Survival, Kaileen Shevchuk

Williams Honors College, Honors Research Projects

The purpose of this project is to synthesize and characterize perfluorocarbon modified methacrylamide chitosan (MACF) microgels produced with the use of a capillary-based microfluidic device. Since cell survival and development is highly related to particles physical properties, analysis of microgels set out to determine the particle’s physical properties. I hypothesize that the viscosity of the MACF polymer as well as the amount of photo initiator influence the physical properties of synthesized particles and as a result can generate particles with various features for cell culture in terms of shape, size, charge and swelling abilities. This hypothesis was validated through the …


The Role Of The Mechanical Environment On Cd117+ Endothelial Cell Angiogenesis, Patrick Link 2019 Virginia Commonwealth University

The Role Of The Mechanical Environment On Cd117+ Endothelial Cell Angiogenesis, Patrick Link

Theses and Dissertations

Angiogenesis is a complex process coordinating cell migration, proliferation, and lumen formation. Changes to the microenvironment regulate angiogenesis through mechanotransduction and cytokine signals. In pulmonary hypertension, something in the process becomes abnormal, resulting in changes to the microenvironment and the formation of a glomerulus of dysfunctional capillaries, called a plexiform lesion. Endothelial cells, expressing CD117 (CD117+ EC clones) increase in the plexiform lesions of pulmonary hypertension, independent of pro-angiogenic VEGF signaling. We hypothesize that the mechanical environment and the macromolecular composition of the extracellular matrix, both, contribute to the aberrant angiogenesis. When we changed the mechanical environment, we changed the …


Towards The Rational Design And Application Of Polymers For Gene Therapy: Internalization And Intracellular Fate, Landon Alexander Mott 2019 University of Kentucky

Towards The Rational Design And Application Of Polymers For Gene Therapy: Internalization And Intracellular Fate, Landon Alexander Mott

Theses and Dissertations--Chemical and Materials Engineering

Gene therapy is an approach for the treatment of acquired cancers, infectious disease, degenerative disease, and inherited genetic indications. Developments in the fields of immunotherapies and CRISPR/Cas9 genome editing are revitalizing the efforts to move gene therapy to the forefront of modern medicine. However, slow progress and poor clinical outcomes have plagued the field due to regulatory and safety concerns associated with the flagship delivery vector, the recombinant virus. Immunogenicity and poor transduction in certain cell types severely limits the utility of viruses as a delivery agent of nucleic acids. As a result, significant efforts are being made to develop …


Cell Surface Coatings For Mammalian Cell-Based Therapeutic Delivery, Pei-Jung Wu 2019 University of Kentucky

Cell Surface Coatings For Mammalian Cell-Based Therapeutic Delivery, Pei-Jung Wu

Theses and Dissertations--Chemical and Materials Engineering

The cell plasma membrane is an interactive interface playing an important role in regulating cell-to-cell, cell-to-tissue contact, and cell-to-environment responses. This environment-responsive phospholipid layer consisting of multiple dynamically balanced macromolecules, such as membrane proteins, carbohydrate and lipids, is regarded as a promising platform for various surface engineering strategies. Through different chemical modification routes, we are able to incorporate various artificial materials into the cell surface for biomedical applications in small molecule and cellular therapeutics.

In this dissertation, we establish two different cell coating techniques for applications of cell-mediated drug delivery and the localization of cell-based therapies to specific tissues. The …


Chemically Modified Monolayer Surfaces Influence Valvular Interstitial Cell Attachment And Differentiation For Heart Valve Tissue Engineering, Matthew N. Rush 2018 University of New Mexico - Main Campus

Chemically Modified Monolayer Surfaces Influence Valvular Interstitial Cell Attachment And Differentiation For Heart Valve Tissue Engineering, Matthew N. Rush

Nanoscience and Microsystems ETDs

As a cell mediated-process, valvular heart disease (VHD) results in significant morbidity and mortality world-wide. In the US alone, valvular heart disease VHD is estimated to affect 2.5% of the population with a disproportionate impact on an increasing elderly populous. It is well understood that the primary driver for valvular calcification is the differentiation of valvular interstitial cells (VICs) into an osteoblastic-like phenotype. However, the factors leading to the onset of osteoblastic-like VICs (obVICs) and resulting calcification are not fully understood and a more complete characterization of VIC differentiation and phenotypic change is required before treatment of valve disease or …


Towards An In Vitro Model Of Testing Osteoblast Cellular Function In Contact With Various Surfaces, Raheleh Miralami 2018 University of Nebraska Medical Center

Towards An In Vitro Model Of Testing Osteoblast Cellular Function In Contact With Various Surfaces, Raheleh Miralami

Theses & Dissertations

Past studies have shown that the success of total joint replacements depends on the biocompatibility of orthopaedic materials, which can be improved by modifying the implant surface. However, the exact roles of these modifications and their effective mechanisms are poorly understood. The objective of this study was to develop and evaluate a model system to investigate the impact of nano-structured surfaces, produced by the ion beam-assisted deposition (IBAD) technique, on biomarkers of osteointegration using an in vitro model. The IBAD technique was employed to deposit zirconium oxide (ZrO2), Titanium oxide (TiO2), and Titanium (Ti) nano-films on …


Digital Commons powered by bepress