Space Vehicles Commons^™

Evaluation Of A Hybrid Reflectance-Based Crop Coefficient And Energy Balance Evapotranspiration Model For Irrigation Management, J. Burdette Barker, Christopher M. U. Neale, Derek M. Heeren, Andrew E. Suyker

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Accurate generation of spatial soil water maps is useful for many types of irrigation management. A hybrid remote sensing evapotranspiration (ET) model combining reflectance-based basal crop coefficients (K_cbrf) and a two-source energy balance (TSEB) model was modified and validated for use in real-time irrigation management. We modeled spatial ET for maize and soybean fields in eastern Nebraska for the 2011-2013 growing seasons. We used Landsat 5, 7, and 8 imagery as remote sensing inputs. In the TSEB, we used the Priestly-Taylor (PT) approximation for canopy latent heat flux, as in the original model formulations. We also used the …

Experimental Investigation Of A New Spiral Wingtip, Naseeb Ahmed Siddiqui, Mohammed Aldheeb, Waqar Asrar, Erwin Sulaeman

International Journal of Aviation, Aeronautics, and Aerospace

Experiments on the relative merits and demerits of slotted wingtips mimicking a bird’s primary feathers have been performed. The real emargination length of feather tips, their flexibility and curved shapes during cruise are considered in the present study. The experiments were performed at a Reynolds number of 3.7 x 10⁵ on a symmetric flat plate half wing of aspect ratio 3. Lift, drag and pitching moments were measured using a six component aerodynamic balance. Four different shapes inspired by bird primary feathers have been analysed. The rigid curved tip performed the best increasing the L/D ratio by 20%. This …

Nanosatellite Space Experiment, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A report written by Professor Bob Twiggs titled "Nanosatellite Space Experiment" from March 30, 2018.

Design And Testing Of An Additively Manufactured Cubesat Structural Bus, Karson A. Roberts

Theses and Dissertations

Recent innovations in additive manufacturing and design capabilities have opened the door for more opportunities to integrate multiple functions into a structural de- sign. Specifically, 3D printing through advanced laser powder bed fusion of metal powder allows for the development and integration of advanced structures that were previously unachievable. The demonstration of these techniques on a small satellite results in a structural bus consisting of various external and internal features, increasing its functionality and capabilities beyond simply providing structural support. 3D printing a multi-functional CubeSat bus with these integrated features such as internal lattices and wiring tabs demonstrates a new …

Parameter Study Of An Orbital Debris Defender Using Two Team, Three Player Differential Game Theory, David F. Spendel

Theses and Dissertations

The United States Air Force and other national agencies rely on numerous space assets to project their doctrine. However, space is becoming an increasingly congested, contested, and competitive environment. A common risk mitigation strategy for the orbit debris problem is either performing evasive maneuvers, or placing additional shielding on the satellite before launch. Current risk mitigation strategies have significant consequences to satellite operators and may not produce sufficient risk mitigation. This research poses that an orbital debris defender, which would defend the primary satellite from orbital debris, may be a more effective risk mitigation strategy. By assuming the worst case …

Human Optimization And Performance Enhancement In Flight Via Real-Time Biofeedback (Project Have Hope), Michael S. Fritts

Theses and Dissertations

A four-phase, chronological, and build-up approach was implemented that commenced with basic hardware testing in a centrifuge and culminated in flights augmented by real-time biofeedback displays. A prototype Portable Electrocardiogram Unit (PECGU) was designed and proven to accurately measure heart rate (HR) and display percent heart rate reserve (%HRR). Results showed that %HRR was not a sole predictor of cognitive state. Cognitive responses indicated some correlation with %HRR, but were influenced by environment (centrifuge vs. flight). Subjective perceived exertion levels did not show statistically significant changes during test with biofeedback. A G-tracking task was evaluated during centrifuge and flight tests. …

Characterization And Analysis Of Plasma Instabilities In A 600 W Permanent Magnet Hall Thruster, Samuel D. Wright

Theses and Dissertations

Electric propulsion is an important technology for the future of space operations and exploration. Within the range of electric propulsion devices, Hall Effect Thrusters provide a balance of thrust and specific impulse well-suited for many Earth-centric missions. Hall Effect Thrusters have been studied since their development in the 1960s and have been flown on hundreds of spacecraft, but the intimate details of the plasma behavior within the thruster exhaust plume are still not well understood. Furthering this knowledge may be key to improving thruster design to yield better performance and longer lifetimes. To this end, experiments were conducted to measure …

The Study And Application Of Carbon Nanotube Film Heaters For Space Applications, Christopher C. Rocker

Theses and Dissertations

The purpose of this research was to examine the feasibility of using Carbon Nanotube (CNT) sheets as thin film heaters for space applications. The ability to maintain the temperature of space components has a direct impact on a space vehicle's operation and longevity. Currently etched foil heaters are used to heat satellite batteries. Battery heaters are the focus of this research. However, as this study will show, they have limitations and are susceptible to failure. CNT sheets have many beneficial properties and show potential in replacing the etched foil design. In this study test specimens were created by forming laminate …

Space-Based Maneuver Detection And Characterization Using Multiple Model Adaptive Estimation, Justin D. Katzovitz

Theses and Dissertations

An increasingly congested space environment requires real-time and dynamic space situational awareness (SSA) on both domestic and foreign space objects in Earth orbits. Current statistical orbit determination (SOD) techniques are able to estimate and track trajectories for cooperative spacecraft. However, a non-cooperative spacecraft performing unknown maneuvers at unknown times can lead to unexpected changes in the underlying dynamics of classical filtering techniques. Adaptive estimation techniques can be utilized to build a bank of recursive estimators with different hypotheses on a system's dynamics. The current study assesses the use of a multiple model adaptive estimation (MMAE) technique for detecting and characterizing …

Utm, Atm, Stm… Slices Of The Sky?, Ruth E. Stilwell

Space Traffic Management Conference

UTM, ATM, STM… slices of the sky?

This paper will examine the functional differences between Unmanned Aircraft Traffic Management Systems, Air Traffic Management Systems, and Space Traffic Management. Understanding both the similarities between the systems and the different functional requirements of each concept is critical in the discussion and development of STM. While there are many commonalities in each area, it is important to understand how the different environments affect the ability to develop policies, procedure and technologies to manage the vehicles operating in the distinct environment. Both technical and legal frameworks will be discussed.

Building a conceptual framework for …

Responsible Behavior For Constellations And Clusters, Darren Mcknight, Jonathan Rosenblatt, Darren Garber

Space Traffic Management Conference

Many large constellations are being considered for deployment over the next ten years into low earth orbit (LEO). This paper seeks to quantify the risks that these constellations pose to the debris environment, the risks that the debris environment poses to these constellations, and the risks that these constellations pose to themselves. The three representative constellations examined in detail in this paper are operated (or planned to be operated) by Spire Global, Iridium, and OneWeb. This paper provides a balanced risk analysis including collision risk, operational risk, and non-adherence risk. For perspective, the risk posed by these economically useful constellations …

The Effect Of Martensite-Fractions Assumptions In Shape Memory Alloy Springs, Christian Vazquez

Electronic Theses and Dissertations

This research addresses various models of a spring-mass system that uses a spring made of a shape memory alloy (SMA). The system model describes the martensite fractions, which are values that describe an SMA's crystalline phases, via differential equations. The model admits and this thesis contrasts two commonly used but distinct assumptions: a homogeneous case where the martensite fractions are constant throughout the spring's cross section, and a bilinear case where the evolution of the martensite fractions only occurs beyond some critical radius. While previous literature has developed a model of the system dynamics under the homogeneous assumption using the …

Verification And Validation Studies For The Kats Aerothermodynamics And Material Response Solver, Olivia Schroeder

Theses and Dissertations--Mechanical and Aerospace Engineering

Modeling the atmospheric entry of spacecraft is challenging because of the large number of physical phenomena that occur during the process. In order to study thermal protection systems, engineers rely on high fidelity solvers to provide accurate predictions of both the thermochemical environment surrounding the heat shield, and its material response. Therefore, it is necessary to guarantee that the numerical models are correctly implemented and thoroughly validated. In recent years, a high-fidelity modeling tool has been developed at the University of Kentucky for the purpose of studying atmospheric entry. The objective of this work is to verify and validate this …

The Effect Of Task Load, Automation Reliability, And Environment Complexity On Uav Supervisory Control Performance, Sarah M. Sherwood

Doctoral Dissertations and Master's Theses

Over the last decade, military unmanned aerial vehicles (UAVs) have experienced exponential growth and now comprise over 40% of military aircraft. However, since most military UAVs require multiple operators (usually an air vehicle operator, payload operator, and mission commander), the proliferation of UAVs has created a manpower burden within the U.S. military. Fortunately, simultaneous advances in UAV automation have enabled a switch from direct control to supervisory control; future UAV operators will no longer directly control a single UAV subsystem but, rather, will control multiple advanced, highly autonomous UAVs. However, research is needed to better understand operator performance in a …

Spacecraft Fire Safety Research: Combustion Of Lithium-Ion Batteries To Predict Fire Scenarios, Elisabeth Meyer

Williams Honors College, Honors Research Projects

The purpose of this project was to research characteristics of a Lithium-ion battery fire to determine if trends exist in measured fire characteristics that can help predict different fire scenarios. These experiments will ultimately aid in developing an alarm threshold for a spacecraft smoke detector, specifically for Orion, a new, multi-purpose crew vehicle under development by NASA. Orion is the next-generation of spacecraft designed to replace the space shuttle and will play an important role in NASA’s journey to Mars.

In the experiments performed, Lithium-ion batteries were placed in a test chamber and ignited while smoke concentration was measured, simulating …

Design Of Shape-Conforming Nosecone For Optimal Fluid Flow From Transonic To Supersonic Range, Anna Tombazzi

Williams Honors College, Honors Research Projects

Modern flight vehicles, such as rockets, missiles, and airplanes, experience a force caused by forebody wave drag during the flight. This drag force is induced when the frontal point of each vehicle breaks the pressure wave during flight. Efforts to reduce this wave drag force to improve flight efficiency include modifying the nosecone profile of the flight vehicles to lower the drag force.

This project revolved around creating a design to make the transformation of nosecone shapes from a ¾ Parabolic profile to a ½ Power Series profile possible, mid-flight. Using a novel nosecone assembly, shape memory alloys (SMAs) and …

Space Operations In The Suborbital Space Flight Simulator And Mission Control Center: Lessons Learned With Xcor Lynx, Pedro Llanos, Christopher Nguyen, David Williams, Kim O. Chambers, Erik Seedhouse, Robert Davidson

Journal of Aviation/Aerospace Education & Research

This study was conducted to better understand the performance of the XCOR Lynx vehicle. Because the Lynx development was halted, the best knowledge of vehicle dynamics can only be found through simulator flights. X-Plane 10 was chosen for its robust applications and accurate portrayal of dynamics on a vehicle in flight. The Suborbital Space Flight Simulator (SSFS) and Mission Control Center (MCC) were brought to the Applied Aviation Sciences department in fall 2015 at Embry-Riddle Aeronautical University, Daytona Beach campus. This academic and research tool is a department asset capable of providing multiple fields of data about suborbital simulated flights. …

Instrumentation And Inertial Navigation Systems Design For Tensegrity Robot Implementations, Scott Edward Harper

Graduate Theses, Dissertations, and Problem Reports (ETD)

One of the major challenges faced when developing missions for the exploration of planetary bodies is the risk these terrains pose on the science platform when using a traditional lander or wheeled rover. One means of developing platforms to traverse these harsh terrains is to utilize mobility systems comprised of tensegrity structures. These structures have the capacity to distribute loads across a network of axially loaded members such that they can be constructed in a very lightweight manner and morph their geometries when required. In literature, there has been significant progress in simulated environments to utilize tensegrity structures as mobility …

Thermal-Fatigue And Thermo-Mechanical Equivalence For Transverse Cracking Evolution In Laminated Composites, Javier Cabrera Barbero

Graduate Theses, Dissertations, and Problem Reports (ETD)

Carbon fiber reinforced plastics (CFRP) are potential materials for many aerospace and aeronautical applications due to their high specif strength/weight and a low coeffcient of thermal expansion (CTE) resulting in a high long-term stability. Among candidate structures, the re-entry reusable launch vehicles (RLV), the fuel oxidant storage and transportation at cryogenic temperature, space satellites, and aircraft structure (frame, wings, etc...) can be highlighted. However, CFRP are prone to internal damage as a result of high residual stresses and thermal fatigue loading. In this study, micro-cracking damage evolution in laminated composites subjected to monotonic cooling and thermal cyclic loads is developed …

Outer Space: A Steam Voyage, Jancy Mcphee

The Transdisciplinary STEAM+ Journal

SciArt Exchange offers multi-disciplinary art contests, artwork events, consulting, training and community resources to support science and technology education, collaboration, and innovation. Using a science-integrated- with-art approach, SciArt Exchange supports, prepares, and convenes people of all ages, backgrounds and affiliations to discuss and potentially solve space, science, and technology challenges. This field note shares the Humans in Space Art Program and the Project Mars Competition.