Aerospace Engineering Commons^™

Experimental, Computational, And Machine Learning Methods For Prediction Of Residual Stresses In Laser Additive Manufacturing: A Critical Review, Sung Heng Wu, Usman Tariq, Ranjit Joy, Todd Sparks, Aaron Flood, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In recent decades, laser additive manufacturing has seen rapid development and has been applied to various fields, including the aerospace, automotive, and biomedical industries. However, the residual stresses that form during the manufacturing process can lead to defects in the printed parts, such as distortion and cracking. Therefore, accurately predicting residual stresses is crucial for preventing part failure and ensuring product quality. This critical review covers the fundamental aspects and formation mechanisms of residual stresses. It also extensively discusses the prediction of residual stresses utilizing experimental, computational, and machine learning methods. Finally, the review addresses the challenges and future directions …

Insight Into Uniform Filming Of Lif-Rich Interphase Via Synergistic Adsorption For High-Performance Lithium Metal Anode, Yufang He, Li Wang, Aiping Wang, Bo Zhang, Hiep Pham, Jonghyun Park, Xiangming He

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Multi-scale simulation is an important basis for constructing digital batteries to improve battery design and application. Lif-rich solid electrolyte interphase (sei) is experimentally proven to be crucial for the electrochemical performance of lithium metal batteries. However, the lif-rich sei is sensitive to various electrolyte formulas and the fundamental mechanism is still unclear. Herein, the structure and formation mechanism of lif-rich sei in different electrolyte formulas have been reviewed. On this basis, it further discussed the possible filming mechanism of lif-rich sei determined by the initial adsorption of the electrolyte-derived species on the lithium metal anode (lma). It proposed that individual …

Damage Control Measures In Composites: Focus On Damage Tolerance Of Aerospace Structures, Kais Jribi

Doctoral Dissertations and Master's Theses

Barely Visible Impact Damage (BVID) in composite materials presents a stealthy yet significant risk to structural integrity, particularly challenging due to its elusive nature. The approach adopted here diverges from traditional methodologies, focusing on the novel application of Digital Image Correlation (DIC) to map surface area changes during in-situ Compression After Impact (CAI) tests. This technique allows for an in-depth analysis of planar strains along the x and y axes, shedding light on the material's behavior under stress.

A pivotal advancement lies in developing a method for precisely identifying when BVID-induced delamination recommences. By meticulously analyzing strain pattern deviations along …

Development Of Eagle3d Solver For Wall Modeled Les Of Transonic Flows, Spencer Moore

Doctoral Dissertations and Master's Theses

Wall modeled Large Eddy Simulation (LES) is an area of interest due to its ability to lower computational costs of LES simulation. Even with the application of wall models, LES still proves to have practicality issues when it comes to use in industry, due to the expertise, time, and computational resources required to get results. A case described by an axisymmetric transonic bump is explored utilizing the Embry-Riddle Aeronautical Universities in house unstructured finite volume multi-element CFD code, Eagle3D. Eagle3D, has been brought to the state of the art and validated against current research using this transonic bump case as …

Development Of On-The-Fly Quasi-Steady State Approximation For Chemical Kinetics In Cfd, Abhinav Balamurugan

Doctoral Dissertations and Master's Theses

This study analyzes the feasibility of On-The-Fly Quasi-Steady-State Approximation (OTF-QSSA) application for solving chemical kinetics within Computational Fluid Dynamics (CFD) simulations, aiming to reduce the computational demand of detailed mechanisms. An algorithm that dynamically identifies and designates Quasi-Steady-State (QSS) species at specific grid locations and instances during the simulation was developed. With this information, our method pseudo-delays the advancement of concentrations for these QSS species—effectively setting their rate of concentration change to zero for a set number iteration before updating using the detailed mechanism and thereby omitting the computationally intensive processes typically required for their calculation during those skipped iteration. …

Distributed Adaptive Control Methods For Uncertain Multiagent Systems With Coupled Dynamics, Islam Aly

Doctoral Dissertations and Master's Theses

For a multiagent system, a major challenge is achieving overall system stability and performance in the presence of not only uncertainties but also coupled dynamics. Another challenge for these systems is designing distributed adaptive controllers with user-assigned positions in this case and defining the convergence rate of the reference model for each agent using only local (i.e., agent-based) information. Discrete-time architectures have an advantage over their continuous counterparts as they can be directly executed on embedded hardware without the need for discretization. Yet, because of the difficulty of ensuring Lyapunov difference expressions, their designs, which are based on quadratic Lyapunov-based …

Ti Nano Powder Speckle Pattern Creation And Use In Dic Of Zno Modified Single Carbon Fibers, James Matthew Harris

Doctoral Dissertations and Master's Theses

As the use of composites continues to grow across aerospace, naval, automotive, construction, 3D printing, and other countless industries, so does the desire to continuously improve their mechanical properties. Improving the adherence of the fiber-matrix interface is one important step for amplifying the capabilities of composites. Work has been performed in modifying carbon fibers by growing zinc oxide (ZnO) nanorods in the fiber surface using a hydrothermal approach, increasing interfacial area and fiber-matrix friction. Macroscale evaluation has shown that the interfacial modification decreases the inter-ply movement and reduces the processing strains and residual stresses. To fully understand the mechanism taking …

Numerical Study In Wind Energy Extraction From Controlled Limit-Cycle Oscillations In Modified Glauert Airfoil, Ethan L. Deweese

Doctoral Dissertations and Master's Theses

Typically, wind energy harvesting technology employs wind turbines. Towards the goal of meeting increasing energy needs with renewable energy sources a novel wind energy harvesting scheme is considered, utilizing a modified Glauert (MG) airfoil experiencing aeroelastic limit cycle oscillation (LCO) from which energy may be extracted. Synthetic jet actuators (SJA)s are used along with the unique geometry of the MG airfoil to control flow separation and amplify the LCO and energy generation potential of the system. The discussed wind energy harvesting scheme could provide flexibility in allowing installations previously unsuitable to wind turbines due to geometric or low wind velocity …

Implementation Of Path Planning Methods To Detect And Avoid Gps Signal Degradation In Urban Environments, Ayush Raminedi

Doctoral Dissertations and Master's Theses

In the modern world, various missions are being carried out under the assistance of autonomous flight vehicles due to their ability to operate in a wide range of flight conditions. Regardless, these autonomous vehicles are prone to GPS signal loss in urban environments due to obstructions that cause scintillation, multi-path, and shadowing. These effects that decrease the GPS functionality can deteriorate the accuracy of GPS positioning causing losses in signal tracking leading to a decrease in navigation performance. These effects are modeled into the simulation environment and are used as part of the path planning algorithm to provide better navigation …

Indentation Protection Of Lithium-Ion Batteries Using Woven Fiber Metal Laminates, Sida Xu

Doctoral Dissertations and Master's Theses

Lithium-ion batteries are widely used as electric power sources for smartphones, tablets, laptops, e-scooters, unmanned aerial vehicles, aircraft, electric vehicles, airport equipment, and numerous other transportable electronic devices. When these types of batteries get excessively loaded, damage can occur. To study the effects of excessive damage, lithium-ion battery modules with prismatic cells were subjected to destructive quasi-static indentation using a V-shaped stainless steel wedge indenter at different loading orientations, directions, and rates. The modules were discharged to a very low state of charge prior to testing. Force and voltage were measured as a function of displacement to monitor the damaging …

Prediction Of Handling Qualities Deficiencies For Advanced Air Mobility Aircraft, Louis Spier

Doctoral Dissertations and Master's Theses

To date, there are hundreds of Advanced Air Mobility (AAM) vehicles under development. Most of these vehicles differ significantly from traditional airplanes and rotorcraft when it comes to configuration and handling qualities. Handling qualities for traditional airplanes and rotorcraft are often very predictable. All AAM concepts currently under development feature some sort of fly-by-wire flight control system. Regulatory agencies already have decades of experience with certifying fly-by-wire airplanes. Fly-by-wire rotorcraft have proven to be significantly more difficult to certify and several flight test accidents have occurred as a result of handling qualities deficiencies, or “cliffs”. To ensure the safe and …

Mitigating Engine Unstart In Scramjets With Porous Bleeders, Ryan Lindley

Doctoral Dissertations and Master's Theses

The effectiveness of porous bleeders in mitigating unstart phenomena and enhancing isolator effectiveness in a hypersonic scramjet was investigated. Through computational fluid dynamics simulations, the impact of porous bleeder design parameters such as pressure jump coefficient and bleeder size on isolator effectiveness and unstart prevention was evaluated. Results indicated that porous bleeders delayed flow separation and reduced adverse pressure gradients, thereby enhancing isolator performance. Additionally, porous bleeders demonstrated promising capabilities in preventing full unstart events and mitigating oscillatory unstart phenomena.

Benchmarking Of A Sco2 Heat Exchanger Flow Loop, David Velasco

Doctoral Dissertations and Master's Theses

Heat transfer of supercritical carbon dioxide (sCO2) was studied experimentally by commissioning a sCO2 flow loop featuring a horizontal tube-in-tube counterflow heat exchanger with a circular cross section. The main objective was to establish experimental heat transfer research capabilities for sCO2 at Embry-Riddle Aeronautical University’s (ERAU) Thermal Science Lab. sCO2 experiences a drastic change in thermophysical properties near its critical point that results in unique heat transfer characteristics. The high pressures at which sCO2 exists make the large gradients in thermophysical and transport properties difficult to study, experimentally and numerically. However, understanding the heat transfer characteristics and thermophysical behavior of …

Conceptual Design Methodology For The Fan-In-Wing Vtol Aircraft, Brock Steinfeldt

Doctoral Dissertations and Master's Theses

The Fan-In-Wing (FIW) aircraft concept is one of the most compelling solutions for missions demanding jet-like cruise speeds and Vertical TakeOff and Landing (VTOL) capability. However, despite years of interest and documented improvements in lift-fan technology, there exists little in the way of an adequate theory for conceptual design of a fan-in-wing aircraft. To address this issue, a general conceptual design methodology has been developed as a source of guidance for the FIW designer. Through this work, the top-level requirements ranking the fan-in-wing concept above other VTOL aircraft have been defined, while a cross-comparison between the FIW concept and conventional …

State Omniscience For Cooperative Local Catalog Maintenance Of Close Proximity Satellite Systems, Chris Hays

Doctoral Dissertations and Master's Theses

Resiliency in multi-agent system navigation is reliant on the inherent ability of the system to withstand, overcome, or recover from adverse conditions and disturbances. In large part, resiliency is achieved through reducing the impact of critical failure points to the success and/or performance of the system. In this view, decentralized multi-agent architectures have become an attractive solution for multi-agent navigation, but decentralized architectures place the burden of information acquisition directly on the agents themselves. In fact, the design of distributed estimators has been a growing interest to enable complex multi-sensor/multi-agent tasks. In such scenarios, it is important that each local …

Starfish: A Compact, Biomimetic, And Adaptive Shape Memory Alloy Orbital Debris Remover, Katelyn Branaman

Doctoral Dissertations and Master's Theses

This thesis aims to turn the tides on the orbital debris issue through the fabrication and demonstration of a compact, biomimetic, and adaptive shape memory alloy actuated orbital debris remover. The design, referred to as Starfish, is discussed in detail along with its fabrication process and object capture ability. A hard skeleton crafted from PETG was combined with shape memory alloy wires and extension springs to create a biomimetic structure that operates similar to the human hand, capable of gripping a wide range of objects. Relevant simulations were performed and discussed, the iterative fabrication process used to create each component …

Trustable Adaptive Controllers For Multi-Agent Systems With Actuator Dynamics, Atahan Kurttisi

Doctoral Dissertations and Master's Theses

Multi-agent systems have become a powerful tool for a wide range of applications due to the effective and cheap solutions they offer. Especially during the last decade, they have impacted a wide array of civilian and military applications (e.g., surveillance, reconnaissance, and payload transportation). However, they suffer system anomalies due to the operational and material conditions, which yields degraded performance or even instability. Hence, this dissertation investigates the distributed adaptive control design process for uncertain multi-agent systems with scalar and high-order dynamics in the presence of unknown control effectiveness and actuator dynamics. First, it provides an approach for driving a …

Initial Orbit Determination Of Uncooperative Satellites Using Particle Swarm Optimization From The Point Of View Of A Novel Observer Orbit, Taylor Yow

Doctoral Dissertations and Master's Theses

Initial orbit determination is an incredibly valuable tool in the field of space situational awareness (SSA). As the number of launches increases every year, more objects are being put into space around the Earth and with political tensions mounting between certain space-accessing countries such as the United States of America (USA), Russia, and China, the number of satellites whose orbits are unknown to a political rival are increasing as well. In this research, orbit estimation of uncooperative target satellites from the point of view of novel orbits using particle swarm optimization (PSO) algorithm is explored. Two cost functions for the …

Design Of A Launchable Remote-Controlled Rover And Protective Aeroshell, Matthew Loewer, Colby Weeks, Lake Williams, Jackson Zazzaro

Senior Theses

Planetary rovers, vehicles that can traverse challenging terrain, have excelled in their exploration missions to other celestial bodies. They have been especially suitable for exploring Mars, as rovers such as Opportunity and Perseverance have collected valuable geological, atmospheric, seismic, and magnetic information from the Martian surface. Rovers will remain vital in future space exploration missions, and it is necessary to understand their design and functionality. This paper focuses on the design and prototyping of a miniature rover that can survive the rough Martian terrain while collecting and submitting environmental data for scientific analysis. The design is based off proven Martian …

Adaptive Control Of An Aeroelastic System For Active Flutter Suppression And Disturbance Rejection, Patrick Sterling Downs

Doctoral Dissertations and Master's Theses

The future of aircraft design strives for lighter weight, more aerodynamically efficient structures. These improvements may come with the drawback of increased structural flexibility and elevated aeroelastic effects, often resulting in a lower flutter speed. This motivates the implementation of advanced control methods to control aeroelastic systems over a range of flight conditions, suppress and delay the onset of flutter, and compensate for disturbances, actuator dynamics, and unmodeled nonlinear dynamics.

This dissertation first develops a novel method for constructing time-domain simulation models of two and three-dimensional aeroelastic systems, resulting in models that are suitable for the implementation of state-space control …