Aerospace Engineering Commons^™

Exploring A Novel Adaptive Mesh Refinement Strategy For High-Speed Cfd, Arjun Jaishankar Vedam

Doctoral Dissertations and Master's Theses

Adaptive Mesh Refinement (AMR) techniques to efficiently and robustly achieve grid independent solutions on multi-element unstructured grids is a topic of practical interest within the CFD community.

The current effort focuses on the efficiency of a novel Adaptive Mesh Refinement (AMR) strategy that is developed and evaluated for transonic high-speed flows using Ansys Fluent. The algorithm for marking cells for adaptation is designed to systematically reduce local truncation errors based on the curvature of the primitive vector field. The algorithm for marking cells for adaptation is described in sufficient detail to be portable to other flow solvers that offer AMR. …

Modeling The Dynamics Of Flexible Aerospace Vehicles Using The Theory Of Functional Connections, Carlo Lombardi

Doctoral Dissertations and Master's Theses

Modeling and control of flexible vehicles is a topic of high interest in the aerospace field and a key challenge lies in finding accurate mathematical representations of the flexible dynamics of continuous elastic structures that allow simple integration into estimation and control algorithms. The answer was found in approximating the dynamics of these systems with sets of coupled Ordinary Differential Equations (ODE) for which a well-established estimation and control theory is available. Each of the techniques employed to achieve this goal is characterized by its own strengths and limitations. Hence, the main objective of this research is to develop the …

Wind Tunnel Automation For Propeller Testing, David Ricardo Lara

Mechanical & Aerospace Engineering Theses & Dissertations

An automated propeller test capability for the ODU Low-Speed Wind Tunnel Facility is demonstrated; implementing automation improved both ease of testing and quality of results. An experiment was performed with and without automation to compare results. Prior to this effort, propeller RPM and airstream velocity were manually controlled, leading to time consuming experiments. The setpoint for RPM had to be adjusted at each run to compensate for changes in airstream velocity.

LabVIEW, a graphical programming software, was used to develop the controllers and automation algorithm. A Proportional Integral Derivative (PID) control approach was developed to simultaneously control airstream velocity and …

Wind Tunnel Testing Of A Novel Quadrotor Design, Oliver Marius Tobisch

Mechanical & Aerospace Engineering Theses & Dissertations

This study presents the test development and aerodynamic evaluation of the Quadfoil UAV, a novel quadrotor configuration featuring a central lifting body in the form of an airfoil to enhance forward-flight efficiency. Flight tests conducted by Virginia Tech demonstrated a 25% increase in endurance and a 32% improvement in range compared to conventional quadcopters, validating the aerodynamic benefits of this design. To further investigate its performance, a dynamically adjustable angle of attack model support system was developed for wind tunnel testing, enabling precise replication of in-flight conditions. The support system, controlled via LabVIEW, adjusts angle of attack based on real-time …

Turbulence And Energetic Ion Production In The Partially Magnetized Hollow Cathode Plume, Margaret Mary Mooney

Dissertations

Hall effect thrusters (HETs) are the most widely used electric propulsion (EP) device for in-space satellite propulsion. EP devices provide high efficiencies for extended mission lifetimes and low thrust for precision maneuvers. The hollow cathode is a critical HET component and undergoes extensive lifetime testing in addition to the lifetime testing of the full HET. Significant density gradients, non-Maxwellian electron behavior, and magnetic fields sufficiently strong enough to magnetize electrons in hollow cathode plumes create favorable conditions for the formation of plasma instabilities, which have an impact on cathode lifetime. Cathode qualification testing is typically conducted independently and includes a …

Emission Behavior At The Single Emitter Scale From A Porous Media Ionic Liquid Ion Source, Thomas Victor Kerber

Dissertations

Ionic liquid ion sources (ILIS) are being developed as one solution to fill a technology gap in low power, high efficiency, high specific impulse space propulsion systems. With a sufficiently intense electric field applied between an emitter electrode and an extractor electrode, charged particles are extracted from the fluid surface and accelerated out of the thruster. In this work, three experimental campaigns examine emission behavior of a single emitter ILIS made of porous material that allows passive propellant feed via capillary action of the ionic liquid 1-ethyl-3-methylimidazolium tetrafluoroborate (EMI-BF₄).

Repeated measurements of the emitter and extractor current as …

Estimating Snow Coverage Percentage On Solar Panels Using Drone Imagery And Machine Learning For Enhanced Energy Efficiency, Ashraf Saleem, Ali Awad, Amna Mazen, Zoe Mazurkiewicz, Ana Dyreson

Michigan Tech Publications

Snow accumulation on solar panels presents a significant challenge to energy generation in snowy regions, reducing the efficiency of solar photovoltaic (PV) systems and impacting economic viability. While prior studies have explored snow detection using fixed-camera setups, these methods suffer from scalability limitations, stationary viewpoints, and the need for reference images. This study introduces an automated deep-learning framework that leverages drone-captured imagery to detect and quantify snow coverage on solar panels, aiming to enhance power forecasting and optimize snow removal strategies in winter conditions. We developed and evaluated two approaches using YOLO-based models: Approach 1, a high-precision method utilizing a …

The Influence Of Dispersed Fillers On The Mechanical Properties Of Sulfur Polymer Heterocomposites, Erkin Abdukhafizovich Rakhmatov, Durdiymurad Gurbanovich Gadamov, Umida Alijonovna Ziyamukhamedova, Jasurbek Himmat Ugli Nafasov, Elbek Tukhtanazar Ugli Turgunaliev, Shokhjakhon Uktam Ugli Abdurakhimov

Technical science and innovation

This article discusses improving the physical, mechanical, and operational properties of composite materials modified with sulfur-containing plasticizers used in the modern construction industry. Furthermore, based on an in-depth analysis of the literature, the types and sizes of fillers and the significance of their mixing technology in the formation of a structure with low porosity of a composite material with a sulfur binder have been studied. The article thoroughly describes a method for obtaining a composite material with a stable sulfur-containing binder, the processes of preparing a solid filler, impregnating the filler with an organic modifier, humidifying and heating the filler …

Robust Spacecraft Autonomy For Deep Space Exploration In Special Euclidean Group Se(3), Matthew Wittal

Doctoral Dissertations and Master's Theses

Over the past half-century, humanity has gained extensive experience conducting manned spaceflight near Earth. Arguably, "near Earth" could even include the Moon — the most distant destination humans have reached. However, "near" in this work primarily refers low Earth orbit (LEO). One could argue that we have not truly left Earth since the Apollo, as spacecraft in some LEOs remain subject to atmospheric drag thus emphasizing their continued connection to Earth's immediate environment. Reflecting on this, it becomes clear that humanity has largely remained bound to Earth’s immediate vicinity since the Apollo missions reached the Moon. However, that is set …

Modeling And Characterization Of On-Orbit Servicing Architectures For Efficient Mission Planning, Samantha Q. Vi Tang

Theses and Dissertations

As space-based systems become increasingly critical to global infrastructure, efficient satellite maintenance and resource management have become essential to ensuring operational longevity. On-orbit servicing has emerged as a key strategy for extending satellite lifespans, mitigating space debris accumulation, and enhancing the cost effectiveness of space operations. This study presents a comprehensive mixed-integer programming (MIP) model to optimize servicer task assignments and routing while minimizing propellant consumption. The model captures the operational complexities of servicing a network of satellites across multiple orbits by incorporating realistic constraints, such as fuel limitations and task completion time windows. Sensitivity analysis allows mission planners to …

Per- And Polyfluoroalkyl Substance (Pfas) Degradation In Water And Soil Using Cold Atmospheric Plasma (Cap): A Review, Victor Somtochukwu Mbanugo, Boluwatife Stephen Ojo, Ta Chun Lin, Yue-Wern Huang, Marek Locmelis, Daoru Han

Biological Sciences Faculty Research & Creative Works

Per- and polyfluoroalkyl substances (PFASs) are persistent organic chemicals found in numerous industrial applications and everyday products. The excessive amounts of PFASs in water and soil, together with their link to severe health issues, have prompted substantial public concerns, making their removal from the environment a necessity. Existing degradation techniques are frequently lacking due to their low efficiency, cost-effectiveness, and potential for secondary contamination. Cold Atmospheric Plasma (CAP) technology has emerged as a promising alternative, utilizing energized reactive species to break down PFASs under ambient conditions. Therefore, this review examines the efficacy and effectiveness of CAP in degrading PFASs by …

Enhancing Gas Cyclone Performance With Exit Diffusers, Omar Mohamed Mourad Dwidar, Yasser El-Shaer, Khairy Elsayed, Seyyed Hossein Hosseini, Goodarz Ahmadi

Journal of Engineering Research

This study evaluates seven cyclone designs to enhance pressure drop and collection efficiency (CE), using the conventional cyclone as a baseline. While the conventional design is efficient in particle collection, it experiences significant energy losses due to high values of pressure drops. This study introduces exit diffusers with various configurations—A, B, C, D, E, and F—to improve cyclone performance. Computational Fluid Dynamics (CFD) simulations were used to analyse the pressure drop, tangential velocity, and static pressure at different levels of each cyclone. The findings reveal that cyclone D achieves a 41.1% reduction in pressure drop but at the cost …

Insect Wing Flexibility Improves The Aerodynamic Performance Of Small Revolving Wings, Gal Ribak, Ori Stearns, Kiruthika Sundararajan, Duvall Dickerson-Evans, Dana Melamed, Maya Rabinovich, Roi Gurka

Physics and Engineering Science

Insect wings are flexible, elastically deforming under loads experienced during flapping. The adaptive value of this flexibility was tested using a revolving wing set-up. We show that the wing flexibility of the beetle Batocera rufomaculata, suppresses the reduction in lift coefficient that is expected to occur with a reduction of wing size compared to rigid propeller blades. Moreover, the scaling of wing flexibility with size is intra-specifically tuned through changes in wing-vein cross-section, resulting in smaller wings achieving proportionally larger chordwise deformations compared to larger wings, when loaded with aerodynamic forces. These elastic deformations control the separation of flow from …

Lifting-Line Predictions For The Ideal Twist Effectiveness Of Spanwise Continuous And Discrete Control Surfaces, Zachary S. Montgomery, Douglas F. Hunsaker, James J. Joo

Mechanical and Aerospace Engineering Faculty Publications

Modern materials and manufacturing technologies have allowed the construction of morphing wings that are able to continuously vary certain airfoil parameters such as twist, camber, or control surface deflection as a function of span. This work presents a twist effectiveness parameter as a means of comparing the ideal aerodynamic efficiency of spanwise continuous control surfaces (morphing wings) and spanwise discrete control surfaces (standard wings). A numerical algorithm is used to compute the twist effectiveness of both continuous and discrete control-surface designs over a wide range of planform shapes with evenly spaced actuation for inviscid, incompressible flow. Results included here show …

Physical And Biological Effects On Moths’ Navigation Performance, Yiftach Golov, Roi Gurka, Alexander Liberzon, Ally Harari

Physics and Engineering Science

In a chemosensing system, the local olfactory environment experienced by a foraging organism is defined as an odorscape. Using the nocturnal pink bollworm moth (Pectinophora gossypiella), we tested the combined effect of three biophysical aspects in its immediate odorscape to shed light on the coupling effects of biotic and abiotic factors on navigation performances of a nocturnal forager: i) the quality of the pheromone source, ii) the pheromone availability, and iii) the airflow characteristics. The navigation performance of the males was investigated using a wind tunnel assay equipped with 3D infrared high-speed cameras. The navigation performance of the males was …

Evidence Of Pure Ammonia Clouds In Jupiter's Northern Temperate Domain From Juno/Jiram Infrared Spectral Data, F. Biagiotti, D. Grassi, G. Liuzzi, G. Villanueva, G. Piccioni, T. Guillot, Shawn Brueshaber, Et. Al.

Michigan Tech Publications

In this work, we analyse data from the Jovian Infrared Auroral Mapper (JIRAM) imaging spectrometer on board the NASA mission Juno, to investigate the presence of spectrally identifiable ammonia clouds (SIACs). Focusing on the data from the first perijove passage, we found that a white vortex structure near 40°N provides the best candidate. Implementing atmospheric retrieval thanks to the planetary spectrum generator, we fit the JIRAM spectra (in the 2.5-3.1 μm range) inside and outside the vortex, varying the gaseous ammonia profiles, and the clouds and hazes properties and composition. We found that outside the vortex, the best fit …

Experiment-Based Superposition Thermal Modeling Of Laser Powder Bed Fusion, Cody S. Lough, Tao Liu, Robert G. Landers, Douglas A. Bristow, James A. Drallmeier, Ben Brown, Edward C. Kinzel

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Parts experience significant local thermal variations during the Laser Powder Bed Fusion (LPBF) metal Additive Manufacturing (AM) process, providing a potential source of defects. Near real-time thermal predictions can enable better process planning and facilitate corrections on subsequent layers to enable the engineering of laser parameter and scan path combinations that avoid defect inducing scenarios. This paper considers an experiment-based Discrete Green's Function (DGF) thermal model for temperature field prediction in LPBF. An analytical framework is developed and used to calculate an experimental DGF (i.e., powder bed's single pulse temperature response) from spatiotemporal Short-Wave Infrared (SWIR) camera data. The extracted …

Seal For A Wave Rotor Disk Engine, Christopher Tait, Pejman Abkari, Brian Sell, Marc D. Polanka

AFIT Patents

A unique seal for a wave rotor disk engine is disclosed herein. The seal is operable for sealing a region between a rotor and a rotor casing. The seal is spring loaded and will engage with the tip of the rotor to reduce pressure loss within the wave rotor disk engine.

Biomedically Vibrant And Cost-Effective Biocomposite Bone Plate – Development And Testing, Asif Mahmud Rayhan, Md Enamul Hoque, Adib Bin Rashid

Michigan Tech Publications

Bone fracture treatment requires a supportive structure called, bone plate for a specific period required to heal the fractured bone. Titanium, stainless steel, tantalum etc. are widely used as bone plates. However, these metallic bone plates lead to some major problems namely, stress shielding, bone atrophy, high cost etc. because of their very high strength compared to bones. In addition, the metallic bone plates need secondary surgery to remove it from the body. This research aims to develop a sustainable composite bone plate that is biocompatible, bio-functional, and biodegradable in the human body. Firstly, different composite samples were fabricated using …

Reentry Vehicle Trajectory Analysis & Performance (Re-Tap) Development And Application To Spacex Starship, Emma L. Webb

Theses and Dissertations

A modeling simulation tool for exo-to-endo atmospheric flight is developed to characterize errors associated with varying simulation fidelities from 3 to 6 degrees-of-freedom (DOF). Engineering approximation errors are quantified and compared with flight data from Apollo 10 and the first Space Shuttle Orbiter reentry (STS-1). The reentry reachability optimal control problem (OCP) is formulated in 6DOF and compared with point-mass solutions, revealing that point-mass solutions oversimplify the problem. A cylindrical reentry vehicle (CRV-1), similar to the SpaceX Starship, is introduced with necessary details for 6DOF analysis. The performance and reentry control capabilities of CRV-1 are captured through 6DOF solutions of …