Aeronautical Vehicles Commons^™

Mini Unmanned Aerial Systems (Uav) - A Review Of The Parameters For Classification Of A Mini Uav., Ramesh Ps, Muruga Lal Jeyan

International Journal of Aviation, Aeronautics, and Aerospace

In the recent years, Mini Unmanned Aerial Vehicle (UAV) has generated a lot of interest both in military and civilian applications. Contemporary innovations have seen the entry of Mini UAV into a wide range of hitherto fore unexplored domains. Advancement in computer systems, miniaturisation of electronics, artificial intelligence and composite materials is propelling the development of Mini UAV. Mini UAV is a class of UAV within the large family of unmanned systems categorised by a set of parameters. However, there are glaring inconsistencies and lack of uniformity in specifying the parameters which define a Mini UAV. The paper explores the …

Parametric Study Of A Turbojet Engine With Auxiliary Bypass Combustion- The Turboaux Engine, Kaleab Fetahi, Sharanabasaweshwara A. Asundi, Arthur C. Taylor, Adem H. Ibrahim, Syed Firasat Ali

Mechanical & Aerospace Engineering Faculty Publications

A parametric study of a novel turbojet engine with an auxiliary combustion chamber, nicknamed the TurboAux engine is presented. The TurboAux engine is conceived as an extension of a turbojet engine with an auxiliary bypass annular combustion chamber around the core stream. The study presented in this article is motivated by the need to facilitate clean secondary burning of fuel at temperatures higher than conventionally realized from air exiting the low-pressure compressor. The parametric study is initiated by performing a simple optimization analysis to identify optimal ‘fan’ pressure ratios for a series of conventional low-bypass turbofan engines with varying bypass …

Assessment And Applications Of The Conversion Of Chemical Energy To Mechanical Energy Using Model Rocket Engines, Hüseyin Sarper, Nebojsa I. Jaksic, Ben J. Stuart, Karina Arcaute

Mechanical & Aerospace Engineering Faculty Publications

To provide the first-year engineering students with a hands-on experience in an engineering application using both chemistry and physics, this team project uses a set of chemical and physical energy concepts and MS Excel based analysis. The main objective of the project is to calculate how much of the potential maximum possible chemical energy is converted into propulsion when using model rocket engines with solid fuel. The secondary objective is to determine the effects of increasing conversion rates on the performance of a model rocket. The solid fuel or propellant used in common model rocket engines is black powder. Compared …

Developing A Uas-Deployable Methane Sensor Using Low-Cost Modular Open-Source Components, Gavin Demali

Williams Honors College, Honors Research Projects

This project aimed to develop a methane sensor for deployment on an unmanned aerial system (UAS), or drone, platform. This design is centered around low cost, commercially available modular hardware components and open source software libraries. Once successfully developed, this system was deployed at the Bath Nature Preserve in Bath Township, Summit County Ohio in order to detect any potential on site fugitive methane emissions in the vicinity of the oil and gas infrastructure present. The deliverables of this project (i.e. the data collected at BNP) will be given to the land managers there to better inform future management and …

Redesign And Analysis For Landing Gear Components, Daniel Clarke

Williams Honors College, Honors Research Projects

A project for Collins Aerospace, the company I co-op at, where I will redesign several components of a landing gear for a military program. Any structural/stress analysis will also be performed. The goal is to reduce weight while maintaining strength and structural integrity.

Research And Design Of A Two-Stage Supersonic Rocket, Ryan Hannaford, James Gase, Matthew Reppa, Harrison Lewis

Williams Honors College, Honors Research Projects

This report documents the entire design process for a two-stage vertical launch vehicle and highlights the team’s research, design work, testing, and construction of the launch vehicle. Every major system of the launch vehicle, including motors, electronics systems, interior and exterior structures, and recovery, will be individually analyzed and assessed during the design process. The launch vehicle will compete at the 2020 Spaceport America Cup in Las Cruces, New Mexico. Undergoing this project will allow the team members to further develop the skills learned throughout the Mechanical Engineering curriculum and Aerospace Systems Engineering curriculum at the University of Akron. Additionally, …

Low-Cost Skewed Redundant Imu Configuration For State-Space Recovery In A Saturated Environment, Levi S. Hubbard

Graduate Theses, Dissertations, and Problem Reports (ETD)

Low-cost sensors for state space determination can be used successfully for ground vehicles, robots, unmanned aerial vehicles, and Internet-of-Things applications. When a high fidelity Inertial Measurement Unit (IMU) cannot be obtained for state space determination, low-cost sensors can be used to satisfactory standards, despite their limitations in capabilities, by using various implementation techniques. The research group was experimentally investigating state space information of an unstable flying vehicle for motion simulation validation. The high fidelity motion capture system would intermittently lose track of the flight vehicle which lost critical flight data.

The goal was to determine the potential of low-cost off-the-shelf …

Improving The Biological Control Of Persicaria Perfoliata (Polygonaceae) Using Rhinoncomimus Latipes Korotyaev (Coleoptera: Curculionidae), Jaewon Kim

Graduate Theses, Dissertations, and Problem Reports (ETD)

Persicaria perfoliata (L.) H. Gross (Polygonaceae; Mile-a-minute weed) is a rapid-growing invasive vine introduced from eastern Asia to northeastern United States in the 1930s. This vine has been invaded in disturbed areas and reforestation sites in 15 states in the U.S. and forms dense, monocultural patches that may inhibit natural forest regeneration. To control this weed, a host-specific biocontrol agent, Rhinoncomimus latipes Korotyaev (Coleoptera: Curculionidae) has been released in the P. perfoliata invaded states in the U.S. during the past 15 years. Currently, R. latipes is released by hand to the invaded area where the presence of the weed is …

Applications Of Drones In Atmospheric Chemistry, Travis J. Schuyler

Theses and Dissertations--Chemistry

The emission of greenhouse gases (GHGs) has changed the composition of the atmosphere during the Anthropocene. A major technical and scientific challenge is quantifying the resulting fugitive trace gas fluxes under variable meteorological conditions. Accurately documenting the sources and magnitude of GHGs emission is an important undertaking for discriminating contributions of different processes to radiative forcing. Therefore, the adverse environmental and health effects of undetected gas leaks motivates new methods of detecting, characterizing, and quantifying plumes of fugitive trace gases. Currently, there is no mobile platform able to quantify trace gases at altitudes(UASs), or drones, can be deployed on-site in …

Dynamic Delegated Corridors And 4d Required Navigation Performance For Urban Air Mobility (Uam) Airspace Integration, Trong Van Nguyen

Journal of Aviation/Aerospace Education & Research

Increased traffic congestion on urban road networks has impacted the travel time for commuters in highly populated urban centers. Urban Air Mobility (UAM) is recognized as a system that transports the passenger and air cargo from any location to any destination within a metropolitan area. UAM may offer a solution to the problematic issue of automobile urban surface transportation congestion. However, the predicted significant growth in the demand for integration of UAM operations into the existing airspace system in the next 20 years and beyond may exceed the capacity of current air traffic control (ATC) system resources, particularly the ATC …

Fatigue Issues And Mitigation Strategies In Collegiate Aviation, Flavio A. C. Mendonca Ph.D., Julius Keller, Erik Levin, Aaron Teo

Publications

The reduction of fatigue-related accidents has been in the NTSB most wanted list since 2016 (NSTB, 2019).

Most research studies have focused on fatigue identification and management within the commercial and/or military aviation environments (Caldwell et al., 2009; Gawron, 2016; Sieberichs & Kluge, 2016).

However, collegiate aviation may be the most challenging in terms of fatigue mitigation. Flight instructors and students often have schedules which may increase the risks for fatigue.

Fuel Efficient Control Design And Constrained Motion Analysis For Spacecraft Coulomb Formation In Elliptic Chief Orbits, Muhammad Wasif Memon

Doctoral Dissertations and Master's Theses

The use of Coulomb force has been analyzed in recent years to provide propulsion in space for various applications. Coulomb formation can also be utilized to make close formation spacecraft missions fuel efficient. In this study, the Coulomb formation of two craft is studied in elliptic chief orbits for two formation geometries. The first formation requires both spacecraft to be aligned along the nadir (radial) direction and the second formation requires both spacecraft to maintain a constant separation distance relative to each other while each spacecraft rotates freely on the surface of a sphere with the ratio of the radii …

Adaptive Learning Terrain Estimation For Unmanned Aerial Vehicle Applications, Pedro L. Vergara Garcia

Doctoral Dissertations and Master's Theses

For the past decade, terrain mapping research has focused on ground robots using occupancy grids and tree-like data structures, like Octomap and Quadtrees. Since flight vehicles have different constraints, ground-based terrain mapping research may not be directly applicable to the aerospace industry. To address this issue, Adaptive Learning Terrain Estimation algorithms have been developed with an aim towards aerospace applications. This thesis develops and tests Adaptive Learning Terrain Estimation algorithms using a custom test benchmark on representative aerospace cases: autonomous UAV landing and UAV flight through 3D urban environments. The fundamental objective of this thesis is to investigate the use …

Analysis Of A Celestial Icosahedron Shaped Vacuum Lighter Than Air Vehicle, Dustin P. Graves, Kyle D. Moore, Anthony N. Palazotto

Faculty Publications

Excerpt: The celestial icosahedron geometry is considered as a potential design for a vacuum lighter than air vehicle. The goal of this research is ultimately to determine the feasibility of the design and to understand the initial fluid-structure interaction of the vacuum lighter than air vehicle and the surrounding airflow.

Unmanned Aircraft System (Uas) Technology And Applications In Agriculture, Samuel C. Hassler, Fulya Baysal-Gurel

Agricultural and Environmental Sciences Faculty Research

Numerous sensors have been developed over time for precision agriculture; though, only recently have these sensors been incorporated into the new realm of unmanned aircraft systems (UAS). This UAS technology has allowed for a more integrated and optimized approach to various farming tasks such as field mapping, plant stress detection, biomass estimation, weed management, inventory counting, and chemical spraying, among others. These systems can be highly specialized depending on the particular goals of the researcher or farmer, yet many aspects of UAS are similar. All systems require an underlying platform—or unmanned aerial vehicle (UAV)—and one or more peripherals and sensing …

Risk Mitigation For Low Latitude Ground-Based Augmentation System (Gbas) Precision Approach Operations, Richard Walter Cole

Doctoral Dissertations and Master's Theses

The ground-based augmentation system (GBAS) is a safety-critical system consisting of the hardware and software that augments the Global Positioning System (GPS) to provide precision approach and landing capability and is one of the navigational cornerstones of the International Civil Aviation Organization's (ICAO) global transition to space-based technologies. In low latitude regions, where the space-based augmentation system (SBAS) cannot provide adequate precision approach service due to large system errors induced by ionospheric delays, GBAS is the best option to provide the primary navigation function for the modernized global air traffic system. The purpose of the study was to identify patterns …

Modeling And Testing Powerplant Subsystems Of A Solar Uas, Luke J. Bughman

Master's Theses

In order to accurately conduct the preliminary and detailed design of solar powered Unmanned Aerial Systems (UAS), it is necessary to have a thorough understanding of the systems involved. In particular, it is desirable to have mathematical models and analysis tools describing the energy income and expenditure of the vehicle. Solar energy income models may include available solar irradiance, photovoltaic array power output, and maximum power point tracker efficiency. Energy expenditure models include battery charging and discharging characteristics, propulsion system efficiency, and aerodynamic efficiency. In this thesis, a series of mathematical models were developed that characterize the performance of these …

Design And Development Of An Autonomous Return Vehicle, Sean Widmier, An Nguyen, Colin Oberthur, Sean Mitchell, Fred Snopl

Von Braun Symposium Student Posters

No abstract provided.

Simplified 2d Skin Lattice Models For Multi-Axial Camber Morphing Wing Aircraft, Bashir Alsaidi, Woong Yeol Joe, Muhammad Akbar

Mechanical and Manufacturing Engineering Faculty Research

Conventional fixed wing aircraft require a selection of certain thickness of skin material that guarantees structural strength for aerodynamic loadings in various flight modes. However, skin structures of morphing wings are expected to be flexible as well as stiff to structural and coupled aerodynamic loadings from geometry change. Many works in the design of skin structures for morphing wings consider only geometric compliance. Among many morphing classifications, we consider camber rate change as airfoil morphing that changes its rate of the airfoil that induces warping, twisting, and bending in multi-axial directions, which makes compliant skin design for morphing a challenging …

License To Launch: The Regulatory Future Of Commercial Ballistic Travel, Jacob Weindling

Minnesota Journal of Law, Science & Technology

No abstract provided.