Dentistry Commons^™

Ada News - 07/12/2021, American Dental Association, Publishing Division

ADA News

Established in 1970 as the official newspaper of the American Dental Association, the ADA News serves practicing dentists and others allied to the dental profession in the U.S. and internationally. It is the No. 1 source of news and information about the many benefits and services the ADA delivers to members daily as well as timely information on scientific, social, political and economic developments affecting dentistry and health care.

A Comparison Of Shear Bond Strength Of Brackets Bonded To Zirconia, Hannah Knott, Xiaoming Xu, Edwin Kee, Qingzhao Yu, Paul Armbruster, Richard Ballard

School of Dentistry Faculty Publications

Purpose: The objective of this study was to compare the shear bond strength (SBS) of ceramic orthodontic brackets bonded to highly translucent zirconia surfaces following the use of two different primers. Materials and methods: Three types of highly translucent zirconia crowns, Cercon xt ML, e.max ZirCAD, and STML-ML Katana Zirconia, were milled, sandblasted, and primed using two zirconia primers, Monobond Etch and Prime and Z-Prime Plus. A ceramic bracket (Radiance) was bonded onto the facial surface of each crown. Shear bond strength was evaluated using a universal testing machine. Results: There was no significant overall difference across the six experimental …

Mechanical Properties And Microstructure Characteristics Of Alloy Parts Produced By Laser Powder Bed Fusion (Lpbf) Method, Hong Yao

LSU Doctoral Dissertations

Additive manufacturing (AM) is a rapid prototyping technology to produce fully functional and complex designing objects. As one of the AM methods, Laser Powder Bed Fusion (LPBF) has gained the most attention from both academic researchers and industrial companies. During the LPBF process, metal powders are applied layer by layer, which can be 20 microns to 50 microns in thickness. After a layer is prepared, a high-power laser, which is commonly controlled by a scanning head, is used to selectively melt the interested area of a 2D geometry which is designed in a computer aided designing software. LPBF method can …

Assessing Participant Feedback To Dental Screenings Provided By Dental Hygiene Students And Follow-Up Dental Hygiene Care In New York City, Susan H. Davide, Margarita Rivera

Publications and Research

Objectives: The purpose of this study was to validate the association between dental screenings and follow-up care to support the level of awareness of dental hygiene services available in the community by increasing access to care and determine patients’ knowledge of dental insurance status. Methods: A first-time dental screening was conducted, and complimentary care was provided for those who followed through with dental hygiene care at the clinic. Survey questionnaires were administered to participants following screening and clinic care. Results: Ten participants of the 50 screened received care at the clinic. Less than half of those screened (41 %) had …

Caries And Restoration Detection Using Bitewing Film Based On Transfer Learning With Cnns, Yi-Cheng Mao, Tsung-Yi Chen, He-Sheng Jhou, Szu-Yin Lin, Sheng-Yu Liu, Yu-An Chen, Yu-Lin Liu, Chiung-An Chen, Yen-Cheng Huang, Shih-Lun Chen, Chun-Wei Li, Patricia Angela R. Abu, Wei-Yuan Chiang

Department of Information Systems & Computer Science Faculty Publications

Caries is a dental disease caused by bacterial infection. If the cause of the caries is detected early; the treatment will be relatively easy; which in turn prevents caries from spreading. The current common procedure of dentists is to first perform radiographic examination on the patient and mark the lesions manually. However; the work of judging lesions and markings requires professional experience and is very time-consuming and repetitive. Taking advantage of the rapid development of artificial intelligence imaging research and technical methods will help dentists make accurate markings and improve medical treatments. It can also shorten the judgment time of …

Cigarette Smoke Stimulates Sars-Cov-2 Internalization By Activating Ahr And Increasing Ace2 Expression In Human Gingival Epithelial Cells, Cassio Luiz Coutinho Almeida-Da-Silva, Harmony Matshik Dakafay, Kaitlyn Liu, David M. Ojcius

All Dugoni School of Dentistry Faculty Articles

A large body of evidence shows the harmful effects of cigarette smoke to oral and systemic health. More recently, a link between smoking and susceptibility to coronavirus disease 2019 (COVID-19) was proposed. COVID-19 is due to infection with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), which uses the receptor ACE2 and the protease TMPRSS2 for entry into host cells, thereby infecting cells of the respiratory tract and the oral cavity. Here, we examined the effects of cigarette smoke on the expression of SARS-CoV-2 receptors and infection in human gingival epithelial cells (GECs). We found that cigarette smoke condensates (CSC) upregulated …

Macomb Dental Society Journal Summer 2021

Journal of the Macomb Dental Society

In the Summer 2021 issue, the reader will find the following feature articles:

• Timing Your Next Real Estate Transaction
• 2021 Oakland, Macomb, Wayne Counties Golf Outing

Also included are regular columns from the President, Executive Director and Editor, as well as news shorts and information on upcoming events.

Effects Of Fluoride On Corrosion Properties Of Orthodontic Retention Wires, John J. Simindinger

Master's Theses (2009 -)

Objective: Alloys used in retention wires corrode in the oral environment. Previous studies have examined the effects of fluoride on archwires used in active treatment, but not on retention wires. The goal of this study was to determine what effect fluoride exposure has on corrosion of various lingual bonded retainer wires in the mouth. Methods: Twenty samples from six different wire types were tested in two solutions. Half were tested in Fusayama-Meyer artificial saliva, while the other half were tested in Fusayama-Meyer plus fluoride correlated to the concentration of toothpaste. A potentiostat was used to measure open circuit potential (OCP) …

Llusd Articulator - Volume 32, Number 1, Loma Linda University School Of Dentistry

Articulator (Dentistry)

Contents:

5 | Dean's Message
9 | Faculty arrive & advance
10 | Zina Johnston leads Clinic Administration; Shelly Withers chairs Dental Hygiene
11 | Paul Richardson retires
13 | Drs. Li & Zhang retire
14 | Kris Marshall retires
15 | LLUSD Student Research runs the CDA table
18 | LLUSD's 2021 virtual commencement
39 | Faculty awards
45 | NEWS
Pickleball Champs
46 | Melvin Lund visits
47 | Tina Saw restores
49 | Sara Chang ninja
51 | Monty Suprono fights the virus
52 | Chi Viet awarded & serves
53 | Elisabetta Cotti resigns
54 | …

J Mich Dent Assoc July 2021

The Journal of the Michigan Dental Association

Every month, The Journal of the Michigan Dental Association brings news, information, and features about Michigan dentistry to our state's oral health community and the MDA's 6,200+ members. No publication reaches more Michigan dentists!

In this issue, the reader will find the following original content:

• A cover story on “Measuring Outcomes to Improve the Quality of Clinical Care”.
• A feature article, “Is Your Office Winning or Losing the Race? You Won’t Know Without Measurement”.
• The feature article, “The DQA and Quality Measurement in Dental Programs and Plans”.
• News you need, Editorial and regular department articles on MDA Foundation activities, Dentistry …

Oral Manifestations Of Tuberculosis, Diana V. Macri, Sandra Castellanos, Elvir Dincer

Publications and Research

This article will update the reader on tuberculosis and its oral manifestations.

After decades of decreasing incidence, tuberculosis resurgence is being seen in some global regions due to factors that include the human immunodeficiency virus (HIV) epidemic, increased immigration from countries with endemic tuberculosis, transmission of tuberculosis in crowded or unsanitary environments, and poor healthcare infrastructure. Additionally, this review is especially prescient considering the increasing prevalence of drug-resistant tuberculosis.

Rotational Forces Generated By Traditional And Loop-Design Clear Aligners, Grant Essink

Loma Linda University Electronic Theses, Dissertations & Projects

Objective: This study aims to evaluate force (F) and torque (Tq) generated by a novel “loop-design” clear aligner compared to the F and Tq generated by a traditional clear aligner design. The novel design may reduce the risk of orthodontic root resorption (ORR), by reducing forces during tooth rotation.

Materials and Methods: Traditional clear aligners (T) and ArchForm Loop clear aligners (AFL) were compared for differences in F and Tq exerted on selected canine and molar teeth. The test tooth was sectioned out of the test model, attached to a load cell and replaced in the test model …

Effects Of Cleaning Agents On The Properties Of Two Different Thermoplastic Retainer Materials, Jennifer Brehove

Master's Theses (2009 -)

Objective: There are several different thermoplastic retainer materials and cleaning methods available to fabricate and clean clear retainers. Some studies have investigated the changes in properties of clear retainers after being exposed to different staining agents, varying levels of mechanical strain, and different cleaning agents. However, there are few studies that compare different thermoplastic materials to each other when being subjected to these different types of stresses. The aim of this study is to evaluate the changes in properties of two commonly used thermoplastic retainer materials, polyethylene terephthalate (PETG) and ethylene/propylene (EP), after exposure to different retainer cleaning agents over …

Comparing Orthodontic Debonding Aerosol Production With Various High-Volume Evacuation Systems, Eric Moe

Master's Theses (2009 -)

Objective: The COVID-19 pandemic has placed a new emphasis on defining aerosol generating procedures and evaluating ways to reduce those aerosols. Both biocontaminants and particulate matter can potentially be transmitted with dental aerosols with negative health effects associated with each, especially aerosols with particulate matter of 2.5 micrometers or less (PM2.5). This study aims to evaluate the PM2.5 aerosol production from orthodontic debonding with a high-speed, air-driven handpiece without water coolant and assess the effectiveness of traditional four-handed high-volume evacuation (HVE) and two commercially available hands-free high-volume evacuation (HFHVE) systems. Methods: Orthodontic debonding was simulated using a dental manikin and …

Bending And Phase Transformation Properties Of A Force Gradient Nickel-Titanium Orthodontic Wire, Brinda Shah

Master's Theses (2009 -)

Objective: Conventional nickel-titanium (NiTi) archwires have widespread application in orthodontics due to their unique properties and ability to move teeth with light, continuous forces, but a shortcoming is that they apply near-uniform force along anterior and posterior teeth. Since the force needed to effectively move teeth is a function of the root surface area and bony support, these archwires cause single-rooted teeth to move more than the multi-rooted molars. With the advent of laser-engineered force gradient NiTi orthodontic archwires, individual forces may be applied to different segments or individual teeth of the arch to maximize tooth movement. The aim of …

Mechanism Of Mechanical Vibration In Enhancing Orthodontic Retention, Brent A. Ito

Master's Theses (2009 -)

Introduction: Low-magnitude, high-frequency (LMHF) mechanical vibration is proven to be anabolic and can increase alveolar bone mass. The objectives of this study were to generate an orthodontic retention cell culture model and investigate the effects of LMHF mechanical vibration on human periodontal ligament fibroblast (HPLF) cells after orthodontic loading (retention) in vitro. Materials and Methods: HPLF cells were seeded at a density of 4x105/well in 6-well Flexcell culture plates (Day 0). On day 3, the cells were mechanically stretched (15% surface extension) for 1 hour to mimic orthodontic loading/tension in vitro. On day 5, the cells were randomly assigned to …

In Vitro Study To Analyze Reverse Torque Values Of Prosthetic Screws With Multiple Loosening/Tightening Preload Cycles, Amira Alhameed

Master's Theses (2009 -)

Purpose: To determine the number of loosening/tightening preload cycles prosthetic retaining screws can withstand before fracture, and to record the reverse torque values on each of the 10 applications of screw tightening and loosening. Materials and methods: The testing assemblies consisted of 30 temporary cylinder/multiunit abutment/internal connection implants, 10 each from Biohorizons, Zimmer Biomet Dental, and Dentsply Sirona Astra; the specimens were inserted into resin blocks. Temporary cylinders were connected to the abutments with new prosthetic screws and torqued to the appropriate preloads. The first tests of repeated tightening/loosening preload cycles were applied using a Digital ® torque gauge instrument …

Altered Somatosensory Processing In Secondary Trigeminal Neuralgia: A Case Report, Noboru Noma, Kana Ozasa, Andrew Young

All Dugoni School of Dentistry Faculty Articles

Secondary trigeminal neuralgia might be very rarely preceded by trigeminal neuropathic pain. The patient, in this case, presented with paroxysmal pain in the left mandible and numbness of the lower lip and tongue. Sensory testing of these areas revealed cold and heat hyperalgesia and mechanical hyposensitivity in the mandibular region. Magnetic resonance imaging showed a mass in the left cerebellopontine angle. The patient was prescribed systemic mirogabalin (2.5 mg/day), which provided some relief until the tumor was removed. The histopathological diagnosis was an epidermoid tumor. This article discusses the clinical characteristics and sensory testing findings that distinguish secondary trigeminal neuralgia …

Research Hotspots And Trends Of Microrna In Periodontology And Dental Implantology: A Bibliometric Analysis, Kang Gao, Yiping Dou, Menghao Lv, Yihui Zhu, Sitong Hu, Pan Ma

Faculty, Staff and Student Publications

BACKGROUND: Periodontal disease is a leading cause of tooth loss, and microRNA (miRNA) has been shown to regulate various biological processes. This study aimed to quantitatively analyze the literature related to miRNA in periodontology and dental implantology and summarize the research hotspots and trends in this field.

METHODS: Literature records from 1985 to 2020 were obtained from the Web of Science Core Collection database. After manual selection, the data was used for cooperative network analysis, keyword co-occurrence analysis, and reference co-citation analysis and visualized by CiteSpace.

RESULTS: A total of 287 papers were analyzed between 2007 and 2020, and more …

Use Of An Innovative Simulated-Virtual Training To Improve Dental Hygiene Students’ Self-Reported Knowledge, Attitudes, And Confidence In Providing Care To Child Patients With Autism Spectrum Disorder, Kimberly Frances Cenzon

Dental Hygiene Theses & Dissertations

Problem: As the diagnosis prevalence of Autism Spectrum Disorder (ASD) increases, it is important for dental hygiene students to be knowledgeable and comfortable in providing care to children with ASD. However, limited clinical experiences can result in decreased confidence in the ability to interact with children diagnosed with ASD in a clinical setting. Methodology: A convenience sample of 34, second-year dental hygiene students were recruited from a 4-year entry-level Dental Hygiene program. A simulated-virtual training (SVT) module was developed as an interactive approach for educating dental hygiene students on providing care to a child patient with ASD in a clinical …