Dentistry Commons^™

Iatrogenic Acid-Induced Gingival Recession During Crown Cementation: A Case Report, Vrisiis Kofina, H. An, Swati Y. Rawal

School of Dentistry Faculty Research and Publications

Accidental contact of various chemicals in dentistry may cause damage to the gingiva. A male patient presented for a full mouth rehabilitation with ceramic crowns. The patient underwent the steps of ceramic crown preparation uneventfully. At the time of crown delivery, cotton rolls were placed in several vestibular areas for isolation. They were regularly changed during different steps of etching and cementation process, which included the use of Multilink Primer B (Ivoclar Vivadent™). On removal of the cotton roll in the area of upper right canine, the gingival tissues appeared blanched and grayish white. The cotton roll was found to …

Precision And Trueness Of Implant Placement With And Without Static Surgical Guides: An In Vitro Study, Arndt Guentsch, Laxmi Sukhtankar, Hongseok An, Paul Luepke

School of Dentistry Faculty Research and Publications

Statement of problem

Malpositioning of implants is one of the main factors leading to hard- and soft-tissue deficiencies. Whether static computer-guided implant placement increases accuracy and prevents malpositioning is unclear.

Purpose

The purpose of this in vitro study was to determine accuracy defined by trueness and precision (according to International Organization for Standardization 5725) of computer-assisted implant surgery (fully guided and partially guided) in comparison with freehand single implant placement.

Material and methods

Implants (n=20) were placed fully guided (sleeve-bone distance of 2, 4, or 6 mm), partially guided (guide used for pilot drill), or free hand in identical replicas …

Oral Manifestations Of Syphilis: A Review Of The Clinical And Histopathologic Characteristics Of A Reemerging Entity With Report Of 19 New Cases, Molly Housley Smith, Richard J. Vargo, Elizabeth Ann Bilodeau, K. Mark Anderson, Anna Trzcinska, Carleigh R. Canterbury, John E. Fantasia, Yeshwant B. Rawal

School of Dentistry Faculty Research and Publications

Background

Syphilis is a sexually-transmitted infectious disease caused by Treponema pallidum. Cases of primary and secondary syphilis are on the rise in the United States, with a 14.4% increase in new cases noted from 2017 to 2018 and an escalation of 71% between the years 2014 and 2018. Fulfilling its nickname of “the great imitator,” oral manifestations of syphilis may mimic a variety of infectious, neoplastic, or immune-mediated processes, both clinically and histopathologically. This large spectrum of appearances can create a diagnostic challenge to the clinician and/or pathologist, leading to delay in diagnosis or misdiagnosis.

Methods

A database of …

Comparison Of The Upper Airway Volume In Orthodontically Treated Cases With First Premolar Extractions, Krystal Park

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: Comprehensive orthodontic treatment often entails extraction of teeth to accomplish treatment goals. A potential side effect of extraction therapy is arch length shortening resulting in decreased space for the tongue which may cause a low tongue posture and a possible reduction in airway space. The purpose of the study was to retrospectively determine if extractions of all first premolars during orthodontic treatment and the resulting movement of mandibular incisors are correlated with a reduction in airway volume.

Materials and Methods: The T1 and T2 CBCT’s of 80 patients were collected and reviewed. The cases were divided into treatment (extraction) …

Summary Description And Treatment Plan Elements Derived From Cbct And Mri Based Orthodontic Records, Mainer Cruz

Loma Linda University Electronic Theses, Dissertations & Projects

Objectives: This study examined the agreement of summary description and treatment plan elements derived from cone beam computed tomography (CBCT) and 3-Tesla (3T) magnetic resonance imaging (MRI) scans.

Methods: This retrospective study involved thirteen human subjects, all of whom had one CBCT scan (NewTom 5G, AFP Imaging, USA) and one MRI scan (Siemens Medical Solutions, DE) of the whole head performed within a two-week period. CBCT images were taken with a field of view of 18x16 inches and resolution of 0.3x0.3x0.3 mm, over an exposure time of 5.4 seconds. MR images were acquired using a 3.0T imaging system …

Is Neurotrophic Factor A Second Language That Neuron And Tooth Speak?, Nan Xiao

All Dugoni School of Dentistry Faculty Articles

No abstract provided.

J Mich Dent Assoc September 2021

The Journal of the Michigan Dental Association

Every month, The Journal of the Michigan Dental Association brings news, information, and features about Michigan dentistry to our state's oral health community and the MDA's 6,200+ members. No publication reaches more Michigan dentists!

In this issue, the reader will find the following original content:

• A cover story with “Reports from the Dental School Deans”, Dr. Mert Aksu and Dr. Laurie McCauley.
• A feature article from the Journal’s DEI series, “Building a Culturally Competent Practice”.
• A feature article, “Disability Insurance: 10 Things You Need to Know”.
• News you need, Editorial and regular department articles on MDA Foundation activities, Dentistry and …

Effect Of Finishing And Polishing Techniques On The Fit Accuracy And Dimensions Of Conventional And Cad-Cam Removable Partial Denture Frameworks, Majed Altoman

Loma Linda University Electronic Theses, Dissertations & Projects

Rapid advancements in computer-aided design and computer-aided manufacturing (CAD-CAM) in removable dental prosthodontics have offered new modalities for fabrication of removable partial denture frameworks. The standard tessellation language (STL) files of the scans are used to digitally design the removable partial denture (RPD) framework, which are then printed in cobalt-chromium (Co-Cr) alloy and finished and polished according to manufacturers’ recommendations. There are few studies compare the fit accuracy of the cast DPD framework versus the CAD-CAM RPD frameworks which found that CAD-RP frameworks exhibited the highest discrepancies, using different methods of evaluation. Good fit between the denture base and the …

Accuracy Of Digital Indirect Bonding Technique Utilizing 3d-Printed Trays, Phillip Ha

Loma Linda University Electronic Theses, Dissertations & Projects

Purpose: This study investigated the bracket placement accuracy of a digital indirect bonding (dIDB) technique utilizing 3D-printed trays and the effects of dental crowding and tooth type on bracket placement accuracy.

Material and Methods: Thirty digital mandibular models of various amounts of arch length discrepancy (ALD) were categorized into 3 groups according to the amount of ALD. Digital bracket placement was performed from second molar to second molar using Indirect Bonding Studio (3ShapeTM, Copenhagen, Denmark) and this virtual model was used as the control. Indirect bonding trays were designed using Appliance Designer (3ShapeTM) and 3D-printed with the SprintRayTM …

P53 And Vegf Expression In Human Temporomandibular Joint Discs With Internal Derangement Correlate With Degeneration, Sergio Castorina, C. Lombardo, Paola Castrogiovanni, Giuseppe Musumeci, E. Barbato, Luis Eduardo Almeida, Rosalia Leonardi

School of Dentistry Faculty Research and Publications

No abstract provided.

Knowledge And Awareness Of Dental Specialists, General Dentists And Dental Assistants Regarding Sars‑Cov‑2, Hafsa Qabool, Rashna Hoshang Sukhia, Mubassar Fida

Section of Dental-Oral Maxillofacial Surgery

Background: Severe acute respiratory syndrome coronavirus 2 (SARS‑CoV‑2) has had drastic effects among healthcare professionals.
Objectives: This study aimed to assess knowledge and awareness among dental specialists, general dentists and dental assistants regarding standard patient care guidelines for minimizing the spread of the infection.
Material and methods: A survey-based cross-sectional study was conducted on a sample of 84 participants. The participants were divided into groups of dental specialists, general dentists and dental assistants. A modified version of a validated questionnaire was used to evaluate knowledge and awareness regarding SARS‑CoV‑2 as per the Centers for Disease Control and Prevention (CDC) guidelines. …

Comparison Of Shaping Ability Between Continuous Rotary And Manual Instrumentations In Pediatric Endodontics, Burcu Güçyetmez Topal, Seda Falakaloğlu, Hatice Türkoğlu

Journal of Dentistry Indonesia

Objective: The aim of this in vitro study was to evaluate the efficacy of rotary EndoArt Ni-Ti Gold Pedo Kit and K-files in shaping ability, canal transportation, centering ability and instrumentation time in primary molars.

Methods: For the study total of 30 extracted primary molars root with minimum 7mm root length were selected. Shaping of root canals in primary molars were done using the two systems, and CBCT and specialized software were used for scanning and analysis of pre-operative and post-operative to evaluate the groups for their shaping properties, apical transportation and preparation time in primary root canals.

Results: No …

Interrelationship Between Orthodontics And Implantology In Anterior Aesthetic Rehabilitation: A Case Report, Adailton De Morais Cavalcante, Renata Cordeiro Teixeira Medeiros, Danilo Lopes Ferreira Lima, Saulo Ellery Santos

Journal of Dentistry Indonesia

The rehabilitation of complex cases in the anterior region of the maxilla may require knowledge of several dental specialties. when dental involvement also causes bone and gingival involvement, management usually requires adjustment of gingival zenitis and bone graft to compensate for bone loss.

Objective: to discuss a case of previous orthodontic treatment for implant-prosthetic rehabilitation in the anterior region.

Case report: This case report describes a 40-year-old patient who came with the intention of extracting the tooth and installing a bridge. The implant-prosthetic treatment was performed after previous orthodontic treatment to adapt the gingiva and space.

Conclusion: The interrelationship of …

Evaluation Of The Relationship Between Sella Turcica Bridging And Dental Anomalies, Ahmet Karaman, Saadet Cinarsoy Cigerim Assistant Professor, Nourtzan Kechagia Research Assistant

Journal of Dentistry Indonesia

Objectives: This study aims to evaluate the relationship between the morphological variations of Sella Turcica (ST) and dental anomalies.

Methods: This study included 765 individuals between the ages of 13 and 35. ST morphology was examined in 3 groups as no calcification, partially calcified and completely calcified according to the interclinoid ligament (ICL) on lateral cephalometric films, and it was examined and evaluated in terms of its relationship to impacted canines (unilateral and bilateral), impacted teeth (except 3rd molars), root dilaceration, tooth deficiency (upper incisor lateral - lower and upper second premolar), supernumerary tooth and taurodontism.

Results: The rates of …

Holistic Management For Severe Oral Lichen Planus: A Case Report, Nik Mohd Mazuan Nik Mohd Rosdy, Nyi Mas Siti Purwaningsih

Journal of Dentistry Indonesia

Oral lichen planus (OLP) is an immunologically mediated mucocutaneous disease associated with various factors including systemic diseases, with a higher prevalence in females than males. The majority of OLP cases are accompanied by symptoms of discomfort and/or pain. Treatment of OLP can be challenging due to its unknown aetiology and involvement of multiple contributing factors.

Objective: Our aim is to report a long-term follow-up case of oral lichen planus with holistic management approach. This report will provide some options to clinicians who are having difficulties in managing OLP cases especially with the medications.

Case Report: This case report discusses a …

Evaluation Of The Bone Thickness Of Mandibular Molars Using Cone Beam Computed Tomography, Deniz Yanık, Ahmet Mert Nalbantoglu

Journal of Dentistry Indonesia

Objective: To investigate buccal and lingual bone thicknesses and fenestration rate of mandibular first and second molars using cone-beam computed tomography (CBCT).

Methods: A total of CBCT images of 41 patients were selected and overall 120 mandibular molars were investigated. The buccal and lingual alveolar bone widths were measured at apex of the roots. The prevalence of fenestration in mandibular molars was recorded. Statistical analyses were performed.

Results: The buccal bone widths of mesial root of second molars were significantly lower than the lingual (p<0.05). The lingual bone widths of mesial and distal root of second molars were lower than the buccal (p<0.05). The lowest thickness of buccal and lingual bone was observed in mesial root of first molar and distal root of second molar. The prevalence of fenestration in mandibular first and second molars was 5% and 10%.

Conclusion: The buccal bone widths were lower at the first molar than the second molar. …

Effect Of Natural And Industrial Juices On Surface Microhardness Of Microhybrid And Nanohybrid Composites, Razieh Meshki, Hanieh Hoseini

Journal of Dentistry Indonesia

Numerous studies have been conducted on the effect of various beverages on the mechanical properties of tooth-colored materials, however, little is known about the effects of these materials on composites, particularly newer types such as nanocomposites.

Objectives: This study aimed to evaluate the surface microhardness of two types of composites, micro-hybrid (point 4) and nanohybrid (premise), after exposure to natural and industrial juices.

Methods: In this experimental study, 90 disc-shaped specimens with a thickness of 2 mm and a diameter of 10 mm were taken from two composites, micro-hybrid Point4 (Kerr) and nanohybrid premise (kerr) (two groups of 45). Then, …

Approaches Of General And Specialist Dentists To Deep Caries Management: A Cross-Sectional Study From Turkey, Ebru Delikan, Ayşe Tuğba Ertürk-Avunduk, Seçkin Aksu

Journal of Dentistry Indonesia

Objective: To determine the differences in treatment strategies and material preferences for deep dentine carious lesions (DDCLs) management among general and specialist dentists.

Methods: Dentists working in universities, oral and dental health centers, or private practice were administered a 14-item web-based questionnaire regarding demographic and occupational characteristics, approaches to DDLCs, pulp capping methods, and preferences for restorative materials. The data were examined using descriptive statistical analysis and Pearson’s chi-square tests.

Results: The study enrolled 298 general and 265 specialist dentists among whom 67.1% were female and 73.3% were aged 25 to 35 years. Total excavation and permanent restoration of DDCLs …

Assessment Of The Working Posture Among Dental Students To Prevent Musculoskeletal Disorders, Eleena Mohd Yusof, Muhamad Amir Hazim Razli, Siti Aisyah Iman Mohd Nasir

Journal of Dentistry Indonesia

Poor working posture among dental practitioners has been known to cause musculoskeletal disorders (MSDs), which are made worse by lengthy procedures and a lack of awareness about the proper working posture.

Objectives: To assess the working posture of clinical dental students to determine if interventions were needed to reduce MSDs.

Methods: The working postures of 225 clinical dental students were recorded and assessed within 10 minutes into procedures from March-December 2019, using the Rapid Upper Limb Assessment (RULA) method. The results were then statistically analysed using chi-square and Fisher’s exact tests.

Results: Of the 225 students observed, 64 (28.4%; 95% …

Maxillary Implant Placement In A Limited Residual Bone Height, Calvin Kurnia, Jane Amelia V. Wibisono, Dominica Dian S. Sumantri

Journal of Dentistry Indonesia

The limitation of residual bone height (RBH) and vital structures such as sinuses in the maxillary often make the implant placement procedure becomes complicated. Clinicians may perform sinus elevation prior to implant placement to accommodate the length of the implant fixture. Sinus elevation is an invasive procedure and complication may occur during the surgery including the most frequent complication is perforation of Schneiderian membrane.

Objectives: To discuss a comprehensive management of implant placement and its complication step by step from surgical procedures to crown placement.

Case Report: 67-year-old female patient with partial edentulism in the right maxillary region, presence of …