Dental Materials Commons^™

Effect Of Thickness On Translucency And Masking Ability Of A Recently Developed Single-Shade Resin Composite With Enhanced Opacity: An In Vitro Comparative Study, Sayed Mohamed Ghorab, Hagag Abd Elkader Atya

Future Dental Journal

ABSTRACT

Objective: This study aimed to evaluate the effects of thickness changes on translucency and masking ability of a recently developed single shade resin composite material with enhanced opacity comparing it with a traditional opaque-shade one.

Material and methods: Two brands of composite resins; Omnichroma blocker (OCB) and G-aenial Anterior (GA) in opaque A2 (OA2) shade were selected to enroll the study. Color coordinates of each composite were determined at 0.5, 1, and 1.5 mm thicknesses (n=10/thickness) on four different backgrounds (white baking, black baking, C4 shade porcelain baking and the backing of material itself) by using a …

Influence Of Etching Methods On The Shear Bond Strength Of A Universal Adhesive System To Sound And Artificial Caries-Affected Dentin, Omnia M. Sami, Essam A. Naguib, Rasha H. Afifi, Shaymaa M. Nagi

Future Dental Journal

Abstract:

This study tested the effect of different etching methods on the bond strength of a universal adhesive system to caries-affected (CAD)and sound dentin. Methods: forty premolars were wet grinded to expose flat occlusal midcoronal dentin. Specimens were equally divided according to the substrate; sound and (CAD) by exposing to pH-cycling for 14 days. Each dentin substrate was bonded with Single Bond^TM universal adhesive applied either after no etching or etching of dentin, then resin composite was built up. Specimens were tested for shear bond strength (SBS). The data was analyzed by two-ways ANOVA. Results: Single Bond^TM universal …

Evaluation Of Strength Of Different Resin Materials Used In Overdenture, Mohamed Emam, Hesham E. Alam El Deen, Hamdy Abu El Fotoh, Ayman Fateen

Future Dental Journal

Introduction: Finding a suitable material that could be used to restore relatively small inter-arch spaces in which reasonable aesthetics as well as good functional strength could be achieved is a difficult process that requires good understanding of the clinical situation and precise management. Historically Metal used to offer the smallest possible thickness with excellent strength but lacks resiliency with poor aesthetics.

Aim of the study: This In-vitro study was conducted to compare two different aesthetic materials PEEK and ACETAL regarding their mechanical strength when used as Overdenture framework in a relatively small thickness.

Material and Methods: 120 specimens were …

Evaluation Of Incorporating Bracing Arm In Precision Attachment Unilateral Removable Partial Denture, Hussein El Charkawi, Aya Fawzy, Mohamed M. Dohiem

Future Dental Journal

ABSTRACT

Purpose: This Randomized Control Trial study aimed to compare between two designs of Precision Attachment Unilateral Removable Partial Denture, one conventional design and the other modified with bracing arm and mesial rest.

Materials and Methods: twenty male patients having Kennedy Class II mandibular edentulous ridges received the two designs in a split mouth study for a follow-up period of eighteen months. Probing Pocket Depth around abutment was measured. A standardized radiographic technique was used to evaluate bone height changes.

Results: The results showed insignificant pocket depth and bone height changes in the two groups.

Conclusion: Precision Attachment Unilateral Removable …

The Effect Of Thickness And Accelerated Aging On Opalescence Of Different Ceramic Materials, Omar Hussein Abdelbary, Marwa Mohamed Wahsh, Ashraf Hussein Sherif, Tarek Salah Morsi

Future Dental Journal

Purpose: The objective of the study was to evaluate the effect of ceramic material type and thickness on opalescence before and after accelerated aging. Materials and methods: 180 all-ceramic slices were divided into three groups (n=60) according to the ceramic material (InCoris TZI, Empress CAD HT, and Empress CAD LT). Each group was further subdivided into four subgroups (n = 15) according to their thickness (0.5 mm, 0.8 mm, 1 mm and 1.2 mm).). CIE Lab coordinates were measured for each slice against black and white backgrounds using intraoral spectrophotometer and OP was calculated. All specimens were subjected to …

Knowledge And Awareness Regarding Uses Of Extracted Natural Tooth In Clinical Practice, Momina Anis Motiwala, Shizrah Jamal, Karshma Devi, Rabia Ghafoor

Section of Dental-Oral Maxillofacial Surgery

Restoration of aesthetics is one the major patients’ concern in dentistry which may be disrupted due to tooth-loss secondary to trauma, or as part of orthodontic treatment or periodontal problem. A number of treatment options are available for the replacement of teeth, but they may be expensive, and time-consuming, involving artificial teeth. For immediate tooth replacement, patient’s own intentionally extracted or unintentionally avulsed tooth maybe used. The current narrative review was planned to discuss various techniques for the use of natural tooth pontic, which preserves the original contours, size and colour of the replaced tooth. Before using these teeth in …

Radiographic Evaluation Of The Margins Of Clinically Acceptable Metal-Ceramic Crowns, Sheikh Bilal Badar, Kamil Zafar, Rabia Ghafoor, Farhan Raza Khan

Section of Dental-Oral Maxillofacial Surgery

Objective: To radiographically evaluate the proximal marginal fit of the clinically acceptable metal-ceramic crowns.
Methods: The prospective study was conducted at the dental clinics of Aga Khan University, Karachi, from July to December 2018, and comprised metal-ceramic crowns that were evaluated prior to the cementation. Clinical examinations were conducted by seating the crown on the tooth preparation and visual assessment was done using sharp explorer along the margins. Clinically acceptable crowns were then evaluated on the bite-wing radiograph. Any horizontal or vertical inaccuracy of >0.5mm at the proximal margins was recorded as 'discrepancy'. Data was analysed using SPSS 22.
Results: …

Navigating Through Our History In Research: An Altmetric Analysis For Publications By The Full-Time Operative Dentistry Faculty At The Aga Khan University Hospital In The Past Decade, Nighat Naveed, Fahad Umer

Section of Dental-Oral Maxillofacial Surgery

Objective: To analyse the social dissemination of publications by fulltime faculty at a tertiary care facility.
Methods: The retrospective study was conducted at the Aga Khan University Hospital, Karachi, and comprised publication records of the fulltime Operative Dentistry faculty members between July 2011 till July 2021. The search was done on Google Scholar, Altmetric Explorer and PubMed electronic databases. After final screening, all the publications in PubMed-indexed journals, including in vitro studies, randomised controlled trials, original research articles, case reports and letters to the editor, for which the Altmetric Attention Score was available were included.
Results: Of the 225 publications …

How Effective Are Eco-Friendly Dental Hygiene Products In Preventing Carious Lesions And Improvement In Overall Oral Health, Mary Claryns Truz, Destiney Coles

Dental Hygiene Student Scholarship

Objectives: The purpose of this review of literature is to measure the effectiveness, and future of eco-friendly¹ dental hygiene products in the dental field. As the manufacturing of products from food to technology increases over time, so does the sentiment for environmental practices. The numerous organizations that push for more sustainable initiatives in modern-day society continue to increase over time. The efforts for sustainable practices can be seen in the field of dentistry through dental hygiene products. These products range from compostable toothbrushes, waste-free toothpastes to organic floss advertised for use by the public. In reviewing the efficacy of …

National Children's Dental Health Month Activity Book (2022), American Dental Association Foundation

National Children's Dental Health Month

No abstract provided.

Libro De Actividades Por El Mes Nacional De La Salud Dental Infantil [Spanish Language Version: National Children's Dental Health Month Activity Book] (2022), American Dental Association Foundation

National Children's Dental Health Month

No abstract provided.

Cartel Del Mes Nacional De La Salud Dental Infantil "Tiene Sentido Aplicar Selladores." [Spanish Language Version: Sealants Make Sense.] (2022), American Dental Association Foundation

National Children's Dental Health Month

No abstract provided.

National Children’S Dental Health Month - Program Planning Guide (2022), American Dental Association Foundation

National Children's Dental Health Month

No abstract provided.

National Children’S Dental Health Month - Creating Your Own Press Release (2022), American Dental Association Foundation

National Children's Dental Health Month

No abstract provided.

National Children's Dental Health Month Poster "Sealants Make Sense." (2022), American Dental Association Foundation

National Children's Dental Health Month

No abstract provided.

Skeletal Morphology And Tooth Alignment At The Maxillary Central Incisors For Immediate Implant Placement, Wita Buranathavornsom

Chulalongkorn University Theses and Dissertations (Chula ETD)

Objective: To analyze the classification of sagittal root position in maxillary central incisors and to evaluate how sagittal root position related to bone thickness, sex and age in Thai population. Methodology: Between 20 and 80 years old, a total of 308 CBCT images of the maxillary central incisor were chosen and classified into 4 classes (I-IV). On both labial and palatal sides, bone thickness was measured at the crestal, mid-root, and apex levels, as well as 4mm of bone beyond the apex. Additional measurements included bone height and the angle between dental root axis and alveolar bone axis. The difference …

Comparison Of Outcome Between Non-Submerged And Submerged Implant With Simultaneous Bone Augmentation In Esthetic Zone, Nuntapat Banomyong

Chulalongkorn University Theses and Dissertations (Chula ETD)

Objectives: To compare the dimensional changes in the buccal bone thickness of implant placement with simultaneous bone augmentation in the esthetic zone between non-submerged and submerged implants. Materials and methods: Twenty-four patients with a single edentulous area in the esthetic zone were randomly assigned into two groups which were submerged (cover screw) and non-submerged groups (healing abutment). After implant placement, the peri-implant defects were treated by simultaneous GBR. The cone-beam computed tomography (CBCT) scans were taken post-operative immediately (T0) and subsequent at 3 (T3) and 6 (T6) months after implant placement. Vertical buccal bone level (VBL) and horizontal buccal bone …

A Comparison Of Primary Stability Of Aggressive Thread Design Implant Using Two Different Technique In Different Bone Density: An In Vitro Biomechanical Study, Chandarong Huy

Chulalongkorn University Theses and Dissertations (Chula ETD)

Objective: To investigate the correlation of aggressive thread implant in different bone qualities by two systems. Materials and Methods: A single space edentulism of tooth 11 maxillary models was prepared and inserted with artificial polyurethane bone type 1-4 for the preparation site. In total, 24 implants were divided into 4 groups according to the bone types. BLX implants with 4.5mm in diameter and 12 mm in length which are considered aggressive thread implants were used in this study. All implants were digitally planned, and the preparations were performed using computer-assisted guided surgery. After implant insertion, the primary stability was measured …

Comparison Of Volumetric Changes At Implant Connector Among Three Different Types Of Abutment After Cyclic Loading, Piyawan Jirayusakamol

Chulalongkorn University Theses and Dissertations (Chula ETD)

The aim of this study was to compare the volumetric change of dental implant among three different types of abutments after cyclic loading.Thirty dental implants (4.1x10 mm., Straumann®) were used .All of them were inserted in acrylic resin block with usual surgical protocol to gain primary stability and be able to retrieve for volumetric measurement later. Ten of each dental implant connected with Titanium abutment (Group1: Variobase abutment Straumann®), Gold abutment (Group2: UCLA abutment Straumann®) and Zirconia abutment (Group 3: Care abutment Straumann®) consecutively. Then all specimen was submitted to cyclic loading (1x106 cycles, axial load, 100N, 15 Hz) at …

Association Among Anterior Maxillary Dental Arch Form, Alveolar Bone Thickness And Sagittal Root Position Of Maxillary Central Incisor : A Cone Beam Computed Tomography Analysis, Suttikiat Somvasoontra

Chulalongkorn University Theses and Dissertations (Chula ETD)

Purpose: This study evaluated the association among the dental arch form, age-sex groups, and sagittal root position regarding alveolar bone thickness in the maxillary central incisor using cone-beam computed tomography (CBCT) images. Materials and Methods: CBCT images of 280 patients were categorized based on the dental arch form and age-sex groups. Five hundred and sixty sagittal CBCT images of the maxillary central incisors were examined to measure the labial and palatal bone thickness at the root apex level, at the mid-root level and 3 mm apically from cemento-enamel junction, with SRP classification. Chi-square, Kruskal-Wallis test, and multiple linear regression were …