A Maximum Energy Release Rate Computational Framework For Fatigue Crack Trajectory And Life Prediction Under Mixed-Mode Proportional And Nonproportional Loading,
2027
The American University in Cairo AUC
A Maximum Energy Release Rate Computational Framework For Fatigue Crack Trajectory And Life Prediction Under Mixed-Mode Proportional And Nonproportional Loading, Nahla Helmy Matar
Theses and Dissertations
The problem of mixed-mode fatigue crack growth has been a persistent research challenge. The determination of fatigue crack propagation direction directly impacts the safety and integrity of components and structures, making it crucial in various industrial applications, including welded drilling pipes, aerospace, and automotive engineering. Unlike uniaxial loading, mixed-mode cracks tend to change direction frequently (kinking), and nonproportional loading adds to the complexity of the problem. This research aims to estimate the crack propagation direction and fatigue crack life in linear elastic materials subjected to mixed-mode (I+II) loading conditions under proportional or non-proportional cyclic loading. Numerical software was developed based …
Engineering Sulfur Concrete Mixes: A Data-Driven Approach To Aggregate Packing And Binder Efficiency,
2026
Zayed University, Abu Dhabi Campus
Engineering Sulfur Concrete Mixes: A Data-Driven Approach To Aggregate Packing And Binder Efficiency, Vasilia Al Khaldi, Abdel Hamid I. Mourad, Maisa El Gamal
All Works
Processing window (mass loss < 3%). A first-order, order-of-magnitude carbon-footprint estimate—presented with explicit caveats rather than as a full life-cycle assessment—indicates that replacing Portland cement with by-product sulfur is the dominant contributor to a substantial reduction in embodied CO₂ per cubic metre relative to equivalent-strength Portland cement concrete. The valorization of steelmaking by-products aligns with circular economy principles, enabling high-performance, recyclable, and low-carbon construction materials without chemical binder modification.
Structural And Electrochemical Characterization Of Na2co3/ Γ- Al2o3 Electrodes For Supercapacitor,
2026
Universitas Negeri Malang, Malang, East Java, Indonesia
Structural And Electrochemical Characterization Of Na2co3/ Γ- Al2o3 Electrodes For Supercapacitor, Wiwin Dwiana, Jeniva Dinta Nanda Fahreza, Anissa Chairani Alfin Nadhira, Fatimatuz Zahra, Erma Surya Yuliana, Muhammad Safwan Abd Aziz, Nandang Mufti
Journal of Mechanical Engineering Science and Technology (JMEST)
The development of electrode materials with suitable structural and surface properties is crucial for improving electrochemical energy storage systems. Gamma alumina (𝛾-Al2O3) has attracted considerable interest in electrochemical research due to its unique structural and surface properties. However, its charge-storage capacity is still limited, highlighting the need for structural and compositional modifications to improve its electrochemical performance. In this study, Na2CO3 was introduced into 𝛾-Al2O3 as a sodium precursor to induce phase modification and enhance the electrochemical activity. The systematic incorporation of Na2CO3 also provides an opportunity …
A Systematic Review Of Alkali-Treated Polylactic Acid Biocomposites Relevant To Pineapple Leaf And Water Hyacinth Hybrid Design,
2026
Universitas Negeri Surabaya, Surabaya, Indonesia
A Systematic Review Of Alkali-Treated Polylactic Acid Biocomposites Relevant To Pineapple Leaf And Water Hyacinth Hybrid Design, Muhammad Rizky Adrianto Subandi, Tri Hartutuk Ningsih, Hanna Zakiyya
Journal of Mechanical Engineering Science and Technology (JMEST)
The increasing demand for sustainable materials has accelerated the development of biodegradable polymer composites. Polylactic acid (PLA)-based natural fiber composites have attracted significant attention due to their renewable characteristics; however, their performance remains limited by weak fiber–matrix compatibility, moisture sensitivity, and inconsistent interfacial behavior. Alkali treatment has been widely applied to modify lignocellulosic fibers by removing non-cellulosic components and improving surface characteristics, although its effectiveness remains dependent on treatment conditions and fiber properties. This systematic review evaluates the influence of alkali treatment on PLA-based natural fiber composites and assesses the available evidence supporting future pineapple leaf fiber (PALF) and water …
Nanographite Effect On Mechanical Properties Of Polylactic Acid Filament Produced By Extrusion Process,
2026
School of Engineering, Lincoln University College, Selangor, Malaysia
Nanographite Effect On Mechanical Properties Of Polylactic Acid Filament Produced By Extrusion Process, Faisal A. Al Nasser, Mohammed Ali Alnasser, Rasmitha Suresh
Journal of Mechanical Engineering Science and Technology (JMEST)
Polylactic acid (PLA) is a polymer widely applied for 3D printing. However, PLA is brittle, necessitating reinforcement through the addition of nanomaterials. This study investigates the influence of nanographite on the mechanical properties of extruded PLA filaments. An exploratory and experimental research methodology was employed. The methods include the mixing of the PLA and nanographite at concentrations of 0.5%, 1.0%, and 1.5% using a solution-based technique involving chloroform and magnetic stirring. The resulting dried PLA-nanographite mixture was cut into pellet-like shapes before being extruded into filaments using a single screw filament at 175 ⁰C. The extruded filaments underwent mechanical testing …
Optimizing Prefabricated Temporary Housing Selection For Immediate Evacuation Of Life-Threatening Informal Buildings In Egypt: A Multi-Criteria Logistical And Climatic Framework,
2026
PhD student, Architectural Engineering Department, Faculty of Engineering, Fayoum University, Egypt
Optimizing Prefabricated Temporary Housing Selection For Immediate Evacuation Of Life-Threatening Informal Buildings In Egypt: A Multi-Criteria Logistical And Climatic Framework, Amira Hamdi Abdel Hamed, Sherif Mohamed Sabry El Attar, Abdullah Badawy Mohammed
HBRC Journal
This research introduces and proposes an integrated multi-criteria decision-making (MCDM) model that can be used to find optimal prefabricated structural systems in temporary housing for informal settlement redevelopment projects in Egypt. The framework combines aspects of the three sustainability axes (environmental, social, and economic) and regional spatial requirements to ensure sufficient on-site accommodation and reduce socio-economic disruption due to displacement. The 21 criteria were subject to a two-stage process using structured expert surveys: one round (N = 31) to determine relative importance via structured ranking and the second round (N = 32) to use the Technique for Order Preference by …
Alkali-Activated By-Products In Clayey Soil Stabilization – A Laboratory Study,
2026
PhD, Istanbul Technical University, Department of Civil Engineering, Maslak, 34469, Istanbul, Türkiye
Alkali-Activated By-Products In Clayey Soil Stabilization – A Laboratory Study, Önder Akçakal, Mustafa Hatipoğlu
Journal of Sustainable Construction Materials and Technologies
Clayey soil stabilization is one of the important topics of the geotechnical engineering where binder stabilization is widely used to increase the bearing capacity and reduce the settlements of the soil layers. However mechanical performance of the binder stabilized clays is generally lower than sands and more dependent on soil properties. Utilization of the alkali-activated by-products, such as fly-ash (FA) and ground granulated blast furnace-slag (GGBS) as a binder in clays is an emerging topic where traditional cement can be replaced with these industrial waste materials. Recycling these materials provides advantages in reduction of the carbon footprint and construction costs …
Friction Coefficients Characteristic Of Biodegradable Lubricants Based On Coconut Oil With The Addition Of Beeswax,
2026
Department of Mechanical and Industrial Engineering, State University of Malang, Malang, East Java, Indonesia
Friction Coefficients Characteristic Of Biodegradable Lubricants Based On Coconut Oil With The Addition Of Beeswax, Munirul Islam Dwi Suwari, Aminnudin Aminnudin, Ahmad Atif Fikri
Journal of Mechanical Engineering Science and Technology (JMEST)
Coconut oil-based lubricants are currently commonly used as an alternative to environmentally friendly lubricants because they are biodegradable and have a low environmental pollution impact. However, coconut oil has less than optimal lubrication capabilities compared to mineral lubricants, so the addition of beeswax additives is needed to improve its tribological characteristics. This study specifically aims to analyze the direct effect of adding varying amounts of beeswax on the performance and efficiency of coconut oil lubricants. The friction coefficient tested using pin on disc methods according to ASM G99 with the pin-on-disc tribological testing were 7075 aluminium pins with a standard …
A Built Environment Framework For Sustainable Urban Transport In Developing Countries: Lessons From Copenhagen,
2026
Assistant Lecturer at the Department of Architecture, Faculty of Engineering, Cairo University, Giza, Egypt
A Built Environment Framework For Sustainable Urban Transport In Developing Countries: Lessons From Copenhagen, Nassamat Mahdy Mohamed, Mohamed Anwer Zayed, Ingy Mohamed El Barmelgy
HBRC Journal
Developing countries are suffering from several urban transport challenges. In addition, global strategies of sustainable urban transport (SUT) lack integration with the seven dimensions of the built environment (7Ds). Therefore, there is a gap between the global strategies and their practical application, especially in the developing countries. To address this gap, this study aims to propose built environment framework for SUT in developing countries. This is addressed by analyzing a selection of global urban transport strategies and extracting consolidated applicable principles, then analyzing Copenhagen as a leading case study in SUT. Based on the research foundation and literature review, the …
Effect Of Cryogenic Soaking Duration On The Crystallographic Structure And Corrosion Resistance Of Astm A36 Steel,
2026
Department of Mechanical and Industrial Engineering, Universitas Negeri Malang, Malang, East Java, Indonesia
Effect Of Cryogenic Soaking Duration On The Crystallographic Structure And Corrosion Resistance Of Astm A36 Steel, Sukri Mubarok, Andoko Andoko, Retno Wulandari
Journal of Mechanical Engineering Science and Technology (JMEST)
This study investigates the influence of cryogenic soaking duration on the crystallographic characteristics and corrosion resistance of ASTM A36 structural steel. Specimens were immersed in liquid nitrogen at −196°C for 0, 12, 36, and 60 hours. Crystallographic analysis was conducted using X-ray diffraction (XRD), while electrochemical corrosion behavior was assessed through Tafel polarization in 3.5% NaCl solution using an Autolab PGstat. Key parameters evaluated included crystallite size, microstrain, dislocation density, corrosion rate, and material degradation. The results showed that soaking up to 36 hours significantly refined the microstructure, as indicated by reduced crystallite size and increased dislocation density and microstrain. …
Thermal Performance Analysis And Heat Transfer Characteristics Of A Solar Powered Paddy Dryer Using A Flat Plate Solar Collector,
2026
Department of Mechanical Engineering, Faculty of Engineering, Universitas Musamus, Merauke, Papua Selatan, Indonesia
Thermal Performance Analysis And Heat Transfer Characteristics Of A Solar Powered Paddy Dryer Using A Flat Plate Solar Collector, Peter Sahupala, Daniel Parenden
Journal of Mechanical Engineering Science and Technology (JMEST)
Freshly harvested paddy holds much water (23.00% wet basis in this study) and spoils quickly without prompt drying. Open sun drying depends on the weather and heats the grain unevenly. This study tested an indirect solar paddy dryer with a 0.60 m² flat plate collector, a 10 kg capacity, and natural convection airflow in Merauke, South Papua. Six thermocouples (collector, drying chamber, and chimney), a pyranometer, and a moisture meter recorded data every 15 minutes at drying temperatures of 40°C, 50°C, and 60°C. The data gave useful heat energy, collector thermal efficiency, and drying rate. Useful heat energy ranged from …
A Review Of Gallium And Germanium Recovery From Industrial Solid Residues,
2026
Missouri University of Science and Technology
A Review Of Gallium And Germanium Recovery From Industrial Solid Residues, Ernest V. Oteng, Marthias Silwamba, Lana Alagha, Alex Luyima
Mining Engineering Faculty Research & Creative Works
The global demand for critical elements such as gallium (Ga) and germanium (Ge), and the shift toward circular mining has accelerated the development of new extraction and recovery processing these metals from industrial solid residues. This transition is driven by a substantial surge in demand for advanced technologies and the depletion of primary ore. Consequently, industrial solid residues, particularly zinc processing residues, smelter slags, flue dusts, and coal fly ash, are emerging as viable alternative sources. These residues incorporate Ga and Ge through isomorphic substitution in phases such as ferrites, silicates, and glassy aluminosilicates, and are enriched by industrial processes, …
A Performance-Based Indicator Framework For Assessing Innovative Materials In Modular Emergency Shelters,
2026
Professor of Design and Environmental Control Systems, Architectural Engineering Department, Pharos University in Alexandria, Alexandria 21648, Egypt
A Performance-Based Indicator Framework For Assessing Innovative Materials In Modular Emergency Shelters, Riham Nady Faragallah, M. S. Refaey, Naglaa M. Yussuf, Riham S. Hassan
HBRC Journal
In recent years, the increasing intensity of disasters, conflicts and mass displacement has amplified the need for emergency shelters that are rapidly deployable, structurally safe, and thermally comfortable, particularly when delivered through prefabricated modular systems. The recent development of innovative materials—including smart, recycled, bio-based, and 3D-printed composites—has demonstrated considerable potential for improving emergency shelter performance. However, existing studies primarily evaluate these materials individually, with limited efforts to integrate them into a comprehensive performance-based decision framework for modular emergency shelters. This research aims to develop a performance-based indicator framework for evaluating and selecting innovative materials to enhance the safety, comfort, durability, …
Multifunctional Polycaprolactone–Lignin–Silver Nanocomposite Membranes For Simultaneous Removal Of Heavy Metal, Nutrient And Microbial Contaminants From Wastewater,
2026
Desert research center
Multifunctional Polycaprolactone–Lignin–Silver Nanocomposite Membranes For Simultaneous Removal Of Heavy Metal, Nutrient And Microbial Contaminants From Wastewater, Heba Isawi, Mohamed H. Hemida, Emaid M. Ahmed, Hesham Moustafa
Nanotechnology Research Centre
Fabricating multifunctional membranes from sustainable and innovative materials has become a significant focus in both academic and industry, as membranes can remove heavy metals and pathogenic contaminants from wastewater in a single step. This research introduces a multifunctional membrane composed of lignin (L) modified silver nanoparticles (Ag NPs) incorporated into renewable polycaprolactone (PCL), resulting in cost-effective and highly crosslinked membranes produced through a solvent-casting approach. A comprehensive series of characterizations and tests were performed to evaluate the membranes' performance, including Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), morphology by scanning electron microscopy (SEM), mechanical testing, and adsorption experiments, as well …
Metal Oxide Semiconductor Gas Sensors For Exhaled Breath Cancer Biomarker Detection,
2026
School of Chemistry and Pharmaceutical Sciences, Guangxi Normal University, Guilin 541004, China
Metal Oxide Semiconductor Gas Sensors For Exhaled Breath Cancer Biomarker Detection, Guang-Lan Chen, Hui-Hui Luo, Wen-Wen Peng, Shi-Yu Xu, Yu-Ting Li, Hui-Jie Ke, Si-Hui Zhong, Jia-Ao Wei, Tong Chen, Xiao-Kun Li, You-Lin Zhang, Wei Chen
Journal of Electrochemistry
Early cancer screening can significantly improve therapeutic outcomes, volatile organic compounds (VOCs) and other related gases in exhaled breath, as cancer-specific biomarkers, offer a novel approach for non-invasive diagnosis. Metal oxide semiconductor (MOS)-based gas sensors are pivotal for exhaled breath VOCs detection, featuring compact size, cost-effectiveness, and rapid response. This review summarizes the most recent five-year research advances in cancer biomarker detection, and clarifies the core mechanisms of electrical property changes from sensing material-VOCs interactions and key performance metrics including sensitivity, selectivity, humidity tolerance, response/recovery time, stability, and operating temperature. This review also highlights the optimization strategies of sensing materials …
Electrocatalytic Oxidation Of Ethylene Glycol To Glycolic Acid: From Mechanism And Catalyst Design To Emerging Neutral Electrolyte Systems,
2026
Key Laboratory of General Chemistry of the National Ethnic Affairs Commission, School of Chemistry and Environment, Southwest Minzu University, Chengdu 610041, Sichuan Province, China
Electrocatalytic Oxidation Of Ethylene Glycol To Glycolic Acid: From Mechanism And Catalyst Design To Emerging Neutral Electrolyte Systems, Man Zhang, Xue Li, Xin-Yu Peng, Lin Wang, Wen-Wen Chen, Yao-Yue Yang
Journal of Electrochemistry
Polyethylene terephthalate (PET) waste represents both an environmental burden and a loss of carbon resources. Alkaline depolymerization of PET yields terephthalic acid and ethylene glycol (EG). Electrocatalytic oxidation of EG to glycolic acid (GA), the monomer of biodegradable polyglycolic acid (PGA), offers a sustainable route driven by renewable electricity. However, the ethylene glycol oxidation reaction (EGOR) involves competing pathways toward C2 products (GA and oxalic acid) and C1 products (formic acid and CO2), making selective GA production a central challenge. This review provides a comprehensive overview of recent progress in selective EG-to-GA electrooxidation from catalyst design, mechanistic understanding, …
Regularization-Based Crystallite Size Distribution Analysis Of Pt/C Catalysts From X-Ray Diffraction,
2026
Stack Development Department, Shanghai Hydrogen Propulsion Technology Co., Ltd., Shanghai 201804, P. R. China
Regularization-Based Crystallite Size Distribution Analysis Of Pt/C Catalysts From X-Ray Diffraction, Cheng-Long Ma, Wei-Yu Shi, Zhong-Jun Hou
Journal of Electrochemistry
Accurate determination of the platinum crystallite size distribution in carbon-supported platinum (Pt/C) catalysts is critical for evaluating both the initial performance and long-term durability of proton exchange membrane fuel cells (PEMFCs). Conventional characterization approaches—including transmission electron microscopy (TEM), small-angle X-ray scattering (SAXS), and the Scherrer equation—are limited by restricted statistical sampling, sensitivity to support interference, or the inability to resolve the full breadth of the size distribution. In this work, we present a regularization-based inversion framework that extracts the volume-weighted crystallite size distribution directly from X-ray diffraction (XRD) line profiles, without requiring any a priori assumption regarding the functional form …
Magnetic Cellulose Nanocrystal Composites Functionalized With Benzalkonium Chloride For Potential Pathogen Control,
2026
University of Dayton
Magnetic Cellulose Nanocrystal Composites Functionalized With Benzalkonium Chloride For Potential Pathogen Control, Kishore Chand, Sydney Herzog, Mohammad Jahid Hasan, Juganta Roy, Moses Ayitey-Adjin Jr., Corbon M. Moss, Sarah Khan, Sara Tester, Monishita Deb, Katherine Schlaak, Sarah Watzman, Yvonne Sun, Esteban Ureña-Benavides, Erick S. Vasquez-Guardado
Chemical and Materials Engineering Faculty Publications
This study presents the design and synthesis of multifunctional magnetic cellulose nanocrystal (CNC) composites engineered for targeted adsorption and broad-spectrum antimicrobial applications. The nanocomposites were fabricated by anchoring mixed-valence Fe3O4 magnetic nanoparticles on eco-friendly CNC frameworks, followed by surface functionalization with benzalkonium chloride (BC), a potent quaternary ammonium biocide. Both sulfated (S) and TEMPO-oxidized CNC (T) variants were investigated across Fe3O4:CNC mass ratios of 1:2 and 1:4. Comprehensive structural, magnetic, and morphological characterization confirmed successful surface modification, superparamagnetic responsiveness, and uniform component dispersion. Thermogravimetric analysis confirmed precise compositional tailoring, capturing up to 87 …
Comparative Performance Evaluation Of Generative Ai-Assisted Acoustic Tiles From Recycled Educational Waste,
2026
Arab Academy for Science and Technology, College of Engineering and Technology, P.O. Box 12577 - smart village, 6 October – Egypt
Comparative Performance Evaluation Of Generative Ai-Assisted Acoustic Tiles From Recycled Educational Waste, Nada Ahmed Talaat, Ahmed Mahmoud Elfakarany, Nihal Atif Salim
HBRC Journal
Noise pollution is increasingly recognized as a critical environmental challenge with direct implications on public health and well-being. In Egypt, data from the Egyptian Environmental Affairs Agency (EEAA, 2019) identify noise as the second most reported environmental concern, affecting both indoor and outdoor spaces. At the same time, the growing volume of waste generated on university campuses represents an underexploited resource for sustainable design. This study addresses these challenges by investigating how generative AI can serve as a design collaborator in suggesting high-performance acoustic tiles from recycled campus waste. Two AI-driven prototypes were developed through prompts emphasizing acoustic absorption, aesthetic …
Glutaraldehyde-Crosslinked Chitosan And Zinc Oxide Coating Reinforced With Polysulfone On Copper As A Platform For Electrochemical Formaldehyde Sensing,
2026
Universitas Jenderal Achmad Yani
Glutaraldehyde-Crosslinked Chitosan And Zinc Oxide Coating Reinforced With Polysulfone On Copper As A Platform For Electrochemical Formaldehyde Sensing, Anceu Murniati Anm, Rahmat Saputra Rs, Arie Hardian Ah, Manty Aldilani Ikaningsih Mai, Moh Haifan Haifan
Chimica et Natura Acta
Formaldehyde monitoring requires electrochemical platforms with stable structures and reliable interfacial responses. This study aimed to prepare and characterize a Cu|CS–GLA/ZnO–PSf composite film on a copper substrate as a platform for further formaldehyde-sensing development. The film was characterized using FTIR, SEM–EDX, XRD, and cyclic voltammetry. FTIR supported the presence of features associated with chitosan, imine, polysulfone, and Zn–O, while SEM–EDX revealed a heterogeneous polymer-rich coating with Zn- and O-containing domains distributed non-uniformly. XRD indicated a predominantly amorphous or poorly crystalline structure. Cyclic voltammetry showed scan-rate-dependent peak separations, with ΔEp increasing from 0.632 to 0.777 V in citrate buffer and from …
