Physical Chemistry Commons^™

Research Progress Of Intermediate Layers In Ti-Based Oxide Anodes, Xiu-Li Song, Hui-Min Yang, Zhen-Hai Liang

Journal of Electrochemistry

Titanium (Ti)-based oxide anodes are excellent anode materials which have been applied widely in electrochemical fields all over the world. Adding intermediate layers in Ti-based oxide anodes can improve the conductivity, lengthen the lifetime and strengthen the stability between Ti base and metal oxides active layers of electrodes. This article reviews the research progress of intermediate layers in Ti-based oxide anodes. At the same time, current problems existed in the field of Ti-based oxide anodes are pointed out and future development trend in oxide electrode with intermediate layers is prospected.

Advanced Treatment Of Dyeing Wastewater For Reuse By Electrochemical Oxidation, Fei-Xiang Chen, Chu-Yin Yang, Ming-Ming Zhou, Jia-De Wang

Journal of Electrochemistry

In response to the characteristics of dye wastewater, the electrochemical oxidation of effluents from the biochemical process of dyeing wastewater was studied in the electrochemical reactor using PbO₂/Ti electrode as the anode and stainless steel plate as the cathode. The results revealed that the electrochemical oxidation could simultaneously remove the Chemical Oxygen Demand (COD), ammonia and chromaticity. At the residence time of 60 min and current density of 10 mA·cm^-2, the COD, ammonia, chromaticity, concentration of chloride ion and pH values could meet the water standards for “the reuse of urban recycling water-water quality standard for …

Voltage Reversal Behavior In Microbial-Anode Fuel Cells, En-Ren Zhang, Jun-Le Niu, Lei Liu, Guo-Wang Diao

Journal of Electrochemistry

Voltage reversal behavior was investigated in microbial-anode fuel cells (MFCs). Electricity-producing biofilms were developed on the surface of anodes in MFCs inoculated with mixed inoculum from activated sludge. MFC duplicates generally exhibited different performances with respect to the internal resistance, the voltage output and the discharging duration when operating in batch mode. Voltage reversal was observed to occur first in the MFC with lower performance when connecting MFCs in series. Analysis of electrode potentials indicated that the potentials of microbial anodes quickly shifted to more positive values when enhancing discharge current, resulting in voltage reversal in MFCs. Increasing temperature would …

Using Hydrolyzed Sludge Liquor As The Substrate Of Microbial Fuel Cell, Peng Liang, Chao Guo, Xia Huang

Journal of Electrochemistry

Hydrolyzed sludge liquor was used as the substrate of microbial fuel cell. When the thermal treatment time increased from 2 h to 96 h, pH varied little between 7.4 and 8.0. When the treatment time increased, the conductivity, COD and alkaline condition increased to 2.53 mS·cm^-1, 2520 mg·L^-1 and 800 mg·L^-1, respectively. Meanwhile, the power density increased to 25 W·m^-3. The COD removal increased firstly, then decreased, and finally reached the maximum of 47% at the hydrolyzed time of 6 h. The maximal coulombic efficiency was 71% when the treatment time was 4 …

Electrochemically Switched Ion Exchange Properties Of Pani-Snp Composite Films In Wastewater Containing Ni2+ And Cd2+, Yan-Ting Feng, Jun-Qiang Xiao, Xiao-Gang Hao, Xu-Li Ma, Zhong-De Wang, Nian-Chen Han

Journal of Electrochemistry

Electroactive PANI-SnP composite films were prepared by drop-coating method on Pt electrodes and investigated as electrochemically switched ion exchange (ESIX) materials for the separation of Cd²⁺ from aqueous solutions. The composition and morphology of the composite film were characterized by Fourier transform infrared spectrometer (FTIR) and scanning electron microscope (SEM). In solutions containing 0.1 mol·L^-1 Ni(NO₃)₂ and Cd(NO₃)₂, cyclic voltammetry (CV) and electrochemical quartz crystal microbalance (EQCM) were used to investigate the electrochemical behavior and ion-exchange mechanism of PANI-SnP composite film. The elementary composition of PANI-SnP composite films in both oxidation …

Graphene Quantum Dots Enhanced Electrochemical Performance Of Polypyrrole As Supercapacitor Electrode, Kun Wu, Si-Zhe Xu, Xue-Jiao Zhou, Hai-Xia Wu

Journal of Electrochemistry

With an objective to develop electrode materials with high specific capacitance and good stability, a completely new nanocomposite of Polypyrrole (PPY) and graphene quantum dots (GQD) was successfully obtained through in-situ polymerization of pyrrole in the presence of GQD suspension. The obtained composites with different mass ratios were characterized by X-Ray diffraction (XRD), Fourier transformed infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). GQD enhanced electrochemical performance of PPY and, as supercapacitor electrodes, the PPY/GQD composites with the mass ratio of PPY to GQD at 50:1 showed a competitive specific capacitance of 485 F·g^-1 at a scan rate of …

Electrocatalytic Oxidation Degradation Kinetics Of Oxalic Acid In A Cylindrical Electrochemical Reactor With Ti/Iro2-Ta2O5 Anode, Jing Su, Hai-Bo Lin, Hong Xu, Wei-Min Huang, Ya-Peng He

Journal of Electrochemistry

The electrocatalytic oxidation degradation kinetics of oxalic acid in a cylindrical electrochemical reactor with Ti/IrO₂-Ta₂O₅  as an anode was studied. The relation between instantaneous current efficiency and organic concentration in bulk was established based on the two paths for direct electrochemical oxidations, and the theoretical model was verified by experiments. The experimental resultswere reasonably consistent with the established kinetic model. Furthermore, the competition between the two paths was explored with the modelparameter analysis.

Book Review, Zong-Rang Zhang

Journal of Electrochemistry

No abstract provided.

Performance Of The Electro-Oxidation And Electro-Fenton Processes With A Bdd Anode For The Treatment Of Low Contents Of Pharmaceuticals In A Real Water Matrix, Sirs Ignasi, Antonio Garrido Jos, Brillas Enric

Journal of Electrochemistry

Here, we report the performance of electro-oxidation and electro-Fenton with a boron-doped diamond (BDD) anode for the treatment of single and multicomponent solutions containing small amounts of pharmaceutical residues (i.e., 1 mg·L^-1 paracetamol and/or 1 mg·L^-1 salicylic acid) spiked into a real water matrix at pH 3.0. Electro-oxidation was performed in a BDD/Pt cell, whereas electro-Fenton was carried out in a BDD/air-diffusion cell to electrogenerate H₂O₂ at the cathode, always operating at constant current density. It was found that the decay of both pharmaceuticals by electro-oxidation was more rapid in the real water matrix than …

Electrokinetic Migration Research Of Phenol In Cohesive Soil, An-An Liu, Kai Fan, Hou-Feng Xiong, Kuo Dong, Yang Yang, Dong-Lei Zou

Journal of Electrochemistry

Using the electrokinetic technique to remediate phenol contaminated soil, the adsorption characteristics, the best extraction agent and extraction conditions of phenol in clay were studied. The migration characteristics of phenol under the conditions of different pH, different moisture contents, different electric-field intensities and different additives were discussed. It was found that the adsorption behavior of phenol followed Freundlich isotherm and the maximum adsorption was 362 mg·kg^-1. Using chloroform as an extractant, with ultrasonic time of 20 min plus temperature shock time of 30 min to extract phenol from soil, the extraction rate could reach 94.3%. Phenol migrated to …

Electrochemical Treatment Of Heavy Metals With Self-Electricity Generation, Wei Xu, Hui-Min Zhang, Zu-Cheng Wu

Journal of Electrochemistry

Heavy metal pollution is among the most serious environmental problems. Electrochemical method possesses many advantages like speediness and high efficiency, which develops rapidly. This review describes the aspect and application of heavy metals with self-electricity generation according to the primary batteries and fuel cells. Some examples to reduce heavy metal ions in the cathode are introduced. Applicability of this technology for removing heavy metals is also discussed. Employing electrochemical technology to treat contaminants with self-energy generation instead of exhausting energy will have a good prospect.

Electrochemical Behavior And Content Determination Of Paeonol At Poly Sudan Ⅲ Modified Electrode, Yan-Jie Zheng, Ai-Lin Liu, Yun Lei, Xin-Hua Lin

Journal of Electrochemistry

The poly SudanⅢ modified electrode was characterized by electrochemical impedance spectroscopy（EIS）and cyclic voltammetry (CV), while the electrochemical behavior of paeonol was studied by cyclic voltammetry (CV). The result shows that the poly Sudan Ⅲ modified electrode exhibits excellent electrocatalytic effect on the oxidation of paeonol. The peak currents of differential pulse voltammetry are linear to the paeonol concentrations over the range of 3.0*10^-7 ~ 2.2*10^-5 mol·L^-1. The detection limit has been estimated to be 5.0*10^-8 mol·L^-1. This method can be used for determination of paeonol content in real sample with satisfactory results.

Io3- And I- Sorption From Groundwater By Layered Double Hydroxides, Abbey Rickelmann, Emily Campbell, Natasha Pence, Tatiana Levitskaia, Sayandev Chatterjee, Frances Smith

STAR Program Research Presentations

Several subsurface water plumes are found at the Hanford U.S. DOE site. These plumes contain many different types of hazardous components including radioactive iodate (IO₃^-) and iodide (I^-), which may have deleterious health effects. To selectively uptake IO₃^- and I^-, inorganic layered double hydroxide (LDH) compounds were synthesized and tested. LDHs are mixed transition metal hydroxides that contain positively charged layers that undergo anion exchange. When LDHs are submerged in the plume water, they can selectively uptake IO₃^- and I^- and remove them from the plume. Raman spectroscopy …

Synthesis And Computational Studies Of A New Class Of Lanthanide Niobate Cluster : [Ln4(H2O)8(So4)5(Nbo3)2]+3h2O; Ln= Dy, Tb, Brady D. Garabato

Masters Theses & Specialist Projects

Polyoxoniobates (PONbs) are a small family of highly electron-rich clusters. The development of new solids composed of these clusters have applications in green energy and electronics. However, the high charge environment of PONbs typically requires alkaline synthetic conditions that are unsuitable for introducing other metals and organic molecules, making synthesis of new systems difficult. To date, very few transition metals and organic ligands have been incorporated into these PONb solids, and lanthanide metal inclusion, which generally improves photoconductivity due to longlived f-orbital excitations, has not yet been fully realized. Here, the synthesis of a new class of lanthanide niobate cluster …

Fabrication Of Tungsten Tips Suitable For Scanning Probe Microscopy By Electrochemical Etching Methods, Gobind Basnet

Graduate Theses and Dissertations

The fabrication of metal tips is becoming an interesting field for scientists who are working in spectroscopy measurements. A significant amount of work has already been done in the tips fabrication process. Metal tips used to analyze the surface of materials play a key role in the scanning tunneling microscope (STM) technique. It's remarkable quality that it is used to study the surface of material at the atomic level.

There are various methods used in the tips fabrication process. Of diverse methods, three different electrochemical etching methods: submerged method, single lamella drop-off method, and double lamella drop-off method are commonly …

The Magnesium Isotopologues Of Mgh In The A2Π-X 2Σ+ System, Kenneth H. Hinkle, Lloyd Wallace, Ram S. Ram, Peter F. Bernath, Christopher Sneden, Sara Lucatello

Chemistry & Biochemistry Faculty Publications

Using laboratory hollow cathode spectra we have identified lines of the less common magnesium isotopologues of MgH, ²⁵MgH and ²⁶MgH, in the A²Π-X²Σ⁺ system. Based on the previous analysis of ²⁴MgH, molecular lines have been measured and molecular constants derived for ²⁵MgH and ²⁶MgH. Term values and linelists, in both wavenumber and wavelength units, are presented. The A²Π-X²Σ⁺ system of MgH is important for measuring the magnesium isotope ratios in stars. Examples of analysis using the new linelists to derive the Mg isotope ratio in …

Modeling Chemical Reactions In Aqueous Solutions, Osman Uner

Graduate Theses and Dissertations

The energy barriers for SN2 ligand exchange reactions between the chloride anion and para-substituted benzyl chlorides were investigated both in water solution and in the gas phase by using quantum chemical simulations at the DFT and Hartree-Fock levels. The question addressed was the effect of the solvent (water) and of the substituent on the barrier height. The para substitutient groups included NH2, OH, OCH3, CH3, C(CH3)3, H, F, Cl, Br, I, CF3, CN, NO2, and SO3- . The calculations in aqueous solution were carried out with the recently developed Ultrafast Monte Carlo method using the TIP3P explicit water model. The …

Optimization Of Sample Preparation In Matrix-Assisted Laser Desorption/Ionization (Maldi) Mass Spectrometry Of Macromolecules, Evgenia Akhmetova

Graduate Theses and Dissertations

New method for the matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) and Fourier transform mass spectrometry (MALDI-FTMS) analysis of low molecular weight polyvinyl acetate (PVAc) was developed and then applied to the characterization of commercially available chewing gum. The optimization of MALDI analysis of PVAc was achieved by investigating the influence of sample preparation variables such as the choice of solvent and choice of matrix-analyte ratio. It was demonstrated that the use of ethyl acetate as a solvent and 2,5-Dihydroxybenzoic acid as a matrix yielded the highest signal intensity for the pure polymer sample. The application of TOF technique did not …

Spectroscopic And Computational Electronic Structure Studies Of Donor-Acceptor Systems, Diana Habel-Rodriguez

Chemistry and Chemical Biology ETDs

Three molecular systems have been studied, which exhibit strong intramolecular electronic communication between constituent moieties. Experimental results for electronic absorption, resonance Raman, electron paramagnetic resonance (EPR), and magnetic circular dichroism (MCD) spectroscopies are presented. Density functional theory (DFT) electronic structure calculations were employed to augment the interpretation of experimental results. Using a valence bond configuration interaction (VBCI) model we show that the ground state properties of the molecules are influenced by excited state configurations. Donor ( = semiquinone)-bridge-acceptor ( = nitronylnitroxide) biradicals show strong ferromagnetic donor-acceptor coupling, and contributions to the ferromagnetic coupling from spin delocalization and spin polarization mechanisms …

Catalytic Mechanism And Function Evolvement Studies Of Phosphatases Within Haloacid Dehalogenase Superfamily (Hadsf), Li Zheng

Chemistry and Chemical Biology ETDs

The haloacid dehalogenase superfamily (HADSF) is one of the largest known enzyme superfamilies, having more than 32,000 nonredundant members. Enzymes in this superfamily catalyze a number of different chemical reactions including dehalogenation, phosphoryl transfer, and hydrolysis of phosphate esters and phosphates. The vast majority of HADSF members are phosphatases, which contain a highly conserved core domain that is constructed to catalyze hydrolysis reactions of phosphorylated sugars or nucleotides by using an active site Asp nucleophile and a Mg²⁺ cofactor. Most phosphatases possess a cap domain, which in association with the core domain assists active site desolvation and binds the …

Exploration Of Aqueous Interfaces And Their Effect On Ion Behavior, Oneka T. Cummings

Doctoral Dissertations

An in-depth understanding of a wide range of physical, chemical, atmospheric and biological processes can only be achieved after the structure and dynamics of interfaces and the interfacial behavior of aqueous species, such as ions, are thoroughly studied and understood. This dissertation describes computational studies conducted to gain a more comprehensive understanding of such interfaces and the behavior of ions in the bulk and interfacial regions of the (1) air/water interface, and (2) alkane/water interfaces.

At the air/water interface the effect of counterion (sodium cations) charge and the influence of ion pairing on anion (chloride) propensity for the air/water interface …

Characterization By Nmr Of Reactants And Products Of Hydrofluoroether Isomers, Cf3(Cf2)3och3 And (Cf3)2c(F)Cf2och3, Reacting With Isopropyl Alcohol, Howard Knachel, Vladimir Benin, William E. Moddeman, Janine C. Birkbeck, Thomas A. Kestner, Tayna L. Young

Chemistry Faculty Publications

The 3M Company product Novec™ 71IPA DL, a mixture of methoxyperfluorobutane, methoxyperfluoroisobutane and 4.5 wt.% isopropyl alcohol, has been found to be very stable at ambient temperature, producing fluoride at the rate of ~1 ppm/year. Our earlier kinetic and theoretical studies have identified the reaction mechanism. This paper identifies the ¹H and ¹⁹F NMR chemical shifts, multiplicities, and coupling constants of reactants and the major products that result from aging the mixture in sealed Pyrex NMR tubes for periods up to 1.8 years at temperatures from 26 °C to 102 °C. Chemical shifts and coupling constants of fluorine …

Effect Of Ethyl Propionate On Low-Temperature Performance Of Lifepo4-Based Li-Ion Battery, Xiao-Ping Li, Lian-Sheng Hao, Wei-Shan Li, Meng-Qing Xu, Li-Dan Xing

Journal of Electrochemistry

A linear carboxylic, ester ethyl propionate (EP), was used as the co-solvent of carbonates, ethylene carbonate (EC), ethyl-methyl carbonate (EMC) and dimethyl carbonate (DMC), and its effect on low-temperature performance of LiFePO₄-based Li-ion battery was studied by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic charge-discharge test. The application of EP enhances the ionic conductivity of the electrolyte, improves the compatibility of the electrolyte with both LiFePO₄ and graphite materials, and thus improves the low-temperature performance of LiFePO₄-based Li-ion battery. The Li-ion battery using the optimized electrolyte of 1 mol·L^-1 LiPF₆/EC:EMC:DMC:EP …

Multifunctional Corrosion Inhibition Behavior Of Zn-Al Calcined Layered Double Hydroxides For Steel Rebar In Nacl Solution, Xiao-Juan Zhang, Jing-Jing Wang, Shi-Gang Dong, Chang-Jian Lin

Journal of Electrochemistry

The Zn-Al layered double hydroxides (Zn-Al LDHs) and calcined products (Zn-Al CLDHs) were synthesized successfully under a routine air atmosphere. The results showed that both Zn-Al LDHs and Zn-Al CLDHs had obvious flake structures. The corrosion inhibition of Zn-Al CLDHs for steel rebar in NaCl solution was studied by electrochemical techniques. It was found that the corrosion rate of steel rebar decreased significantly after the steel rebar was treated by Zn-Al CLDHs in NaCl solution for 3 h. It was indicated that Zn-Al CLDHs could absorb Cl^- and release OH^- during their reconstruction process, which provided dual protection …

Influences Of The Cinnamic Acid On Zinc Electrodeposition At Glassy-Carbon Electrode, Kai Li, Shen Chen, Shen-Na Liu, Bi-Sang Chen, Heng Lin, Guo-Liang Chen, Qing-Xiang Wang

Journal of Electrochemistry

The influences of cinnamic acid (CIN) on the mechanism of Zn deposition and nucleation kinetics onto glassy-carbon electrode were studied by cyclic voltammetry (CV) and chronoamperometry (CA). The results revealed that the zinc reduction took place via Zn²⁺ + 2e → Zn in the presence of CIN, but the kinetics of zinc deposition was changed and the formation rate of zinc nuclei was accelerated. In the absence of CIN, the mechanism of zinc nucleation followed the 3D-instantaneous diffusion-controlled nucleation, while the 3D-progressive diffusion-controlled nucleation in the presence of CIN. The addition of CIN reduced the nucleation rate, but increased …

Preparation And Characterization Of A Novel Composite Electrolyte Ceria-Sulfate For Intermediate Temperature Solid Oxide Fuel Cells, Ze Tong, Yi-Mei Yin, Jie-Wei Yin, Zi-Feng Ma

Journal of Electrochemistry

A novel composite electrolyte SDC-(Li/Na)₂SO₄ was prepared for intermediate temperature solid oxide fuel cells (ITSOFC). The phase structure and cross-sectional morphology were examined by XRD and SEM, respectively, and the ionic conductivity was investigated by AC impedance in a temperature range of 400 ^oC ~ 700 ^oC in air. It was found that the composite electrolyte was composed of two phases: crystal SDC and amorphous (Li/Na)₂SO₄. The conductivity of the composite electrolyte was significantly larger than that of SDC at intermediate temperatures (550 ^oC ~ 700 ^oC) and increased …

The Effect Of Precursors On Performance Of Lini0.5Co0.2Mn0.3O2 Cathode Material, Dong-Ge Hu, Zhang-Zhi Wang, Jia-Li Liu, Tao Huang, Ai-Shui Yu

Journal of Electrochemistry

Commercial LiNi_0.5Co_0.2Mn_0.3O₂ material is generally prepared by a combination of co-precipitation and solid state reaction method. The particle size distribution and morphology of Ni_0.5Co_0.2Mn_0.3(OH)₂ precursor have a great impact on the electrochemical performance of LiNi_0.5Co_0.2Mn_0.3O₂. In this work, the crystal structure and surface morphology of LiNi_0.5Co_0.2Mn_0.3O₂ prepared by three different precursors were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Particle size distribution, tap density and electrochemical performance were …

Preparation And Electrochemical Performance Of Hollow Carbon Spheres/Sulfur Composite, Jun Zang, Hang Qian, Er-Man Zeng, Juan-Ni Fu, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

Hollow carbon spheres were prepared by the PMMA template. Hollow carbon spheres/sulfur composite was made from sulfur and hollow carbon spheres as a conducting framework. The results of SEM and TEM showed that sulfur was uniformly filled in both of the shell and hollow core of hollow carbon spheres. The electrochemical performance of hollow carbon spheres/sulfur composite was characterized by the charge/discharge method. The results showed the excellent rate and cycle performance of hollow carbon spheres/sulfur composite. The reversible capacities of hollow carbon spheres/sulfur composite are 1145 mAh·g^-1, 824 mAh·g^-1, 702 mAh·g^-1, 586 mAh·g …

Polypyrrole-Transition Metal-Oxygen Coordination Complexes As High Performance Lithium Storage Material, Ya Mao, Qingyu Kong, Bingkun Guo, Zhaoxiang Wang, Liquan Chen

Journal of Electrochemistry

No abstract provided.

Influence Of Electrode Hydrophobicity On Performance Of Alkaline Polymer Electrolyte Fuel Cells, Li-Sheng Tan, Jing Pan, Yao Li, Lin Zhuang, Jun-Tao Lu

Journal of Electrochemistry

In the present work, we study the influence of the electrode hydrophobicity on the performance of alkaline polymer electrolyte fuel cells (APEFCs). QAPS or xQAPS is employed as the membrane and the ionomer, while PTFE is used as a hydrophobic additive in order to adjust the electrode hydrophobicity. We find that enhancing the hydrophobicity of anode can promote the performance of APEFCs, while a moderate hydrophobicity of cathode is required to achieve optimal performance. By using xQAPS as the electrolyte and adding some PTFE in the anode, a peak power density of 132 mW·cm^-2 can be obtained at a …