Physical Chemistry Commons^™

Adsorption Of Cu(Ii) Ions From Aqueous Solutions Using A Magnetite Biochar Composite Material, Widi Aprilia Ta'bi, Paulina Taba, Abdul Wahid Wahab, Maming Gappa, Muhammad Zakir, Nur Umriani Permatasari

Makara Journal of Science

Water contamination from heavy metals, such as Cu(II) ions, poses severe threats to human health and the environment. This necessitates the development of efficient and eco-friendly treatment methods. In this study, a magnetite–biochar composite (MBC) was developed as an effective adsorbent for reducing Cu(II) ions from liquid waste. Biochar was produced through the pyrolysis of water hyacinth at 500 °C, while magnetite was synthesized using FeSO₄·7H₂O and FeCl₃·6H₂O with molar ratio of 1:2. The MBC was formed using a co-precipitation method and characterized by Fourier transform Infrared (FTIR) spectroscopy, X-ray diffraction (XRD), Brunauer–Emmett–Teller, and vibration sample magnetometer instruments. FTIR analysis …

Unveiling The Interplay Of Electronic And Phononic Excitations In Laser-Induced Oxygen Activation On Ru(0001), Xiangrui Wang, Jiamin Wang, Paul Spiering, Liping Liu, Jörg Meyer, Jerry L. Larue, Hongliang Xin

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

Understanding laser-induced dynamics on metal surfaces poses significant challenges due to the intricate interplay between electronic and phononic degrees of freedom, which evolve on distinct timescales. In this study, we introduce a machine learning-accelerated approach to molecular dynamics simulations that incorporates anisotropic electronic friction, providing deeper insights into these complex processes. Our framework extends the accessible time and length scales for nonadiabatic dynamics simulations, enabling a detailed investigation of the laser-induced activation of oxygen on the Ru(0001) surface. Statistical analysis reveals that strong electronic excitation dominates the first 800 fs after laser exposure. Beyond this timescale, energy deposited by electronic …

Adsorption Performance Of Mg0.33ni0.33co0.33fe2o4 Nanoparticles Doped With Gadolinium And Lanthanum For Lead (Ii) Removal, Mariam Rabaa, Amani Aridi, Ghassan Younes, Ramadan Awad

BAU Journal - Science and Technology

The issue of water pollution has become a major concern in recent times, and the need for effective strategies for treating contaminated water sources has become more urgent. One promising approach that has been gaining attention in the field of wastewater treatment is the use of nano-ferrites. In this regard, novel Mg_0.33Ni_0.33Co_0.33La_xFe_2-xO₄ and Mg_0.33Ni_0.33Co_0.33Gd_xFe_2-xO₄ nanoparticles (NPs), where x = 0.00, 0.01 and 0.08, were synthesized to test their adsorption performance for the removal of Pb (II). The structural …

Adsorption Of Antibiotics In Wastewater By Stevia Rebaudiana Zinc Oxide Nanoparticles, Hania Guirguis

Theses and Dissertations

Green zinc oxide nanoparticles (ZnO NPs), synthesized using Stevia rebaudiana extract, are investigated as novel adsorbents for the removal of the antibiotics ciprofloxacin (CIP) and tetracycline (TET) from water. The green ZnO NPs were synthesized using a novel, rapid and ecofriendly technique that utilized a natural source with high sugar content as a reducing agent and a less energy intensive approach that did not require annealing or calcination at high temperatures. The particles are mesoporous, with a hexagonal wurtzite structure, a BET surface area of 15.28 m2/g and a size range of 37.36-71.33 nm. At pH 5, the green ZnO …

Electrochemical Sers Study Of Benzotriazole And 3-Mercapto-1-Propanesulfonate In Acidic Solution On Copper Electrode, Yin-Fei Shen, Yan-Li Chen, Sheng-Xu Wang, Ye Zhu, Wen-Chang Wang, Min-Xian Wu, Zhi-Dong Chen

Journal of Electrochemistry

Since the development of acid copper plating technology, the role of additives is indispensable. In addition to the main salt copper sulfate and supporting electrolyte sulfuric acid, suppressors, accelerators, levelers and chlorine ions (Cl^-) are also required to be added into the plating solution. Appropriate additive system can have a significant impact on the coating or the plating solution, which can help improve the quality of the coating and increase the brightness of the coating. Through electrochemical measurement, vibrational spectroscopy, scanning probe microscopy, molecular dynamics simulation and other methods, researches have a deeper understanding in the adsorption configuration …

Adsorption And Transport Of Colloids At Interface And In Bulk, Jingyun Lee

LSU Doctoral Dissertations

Colloids are suspensions of microscopic insoluble particles dispersed in a continuum phase such as liquid or gas. Colloids are found in our everyday life from food and cosmetic industries to pharmaceutical and biomedical applications. Depending on a global minimum of the free-energy landscape, colloidal suspensions can be classified as two major classes: equilibrium or active colloidal system. This Ph.D dissertation presents strategies to engineer equilibrium self-assembled structures and out-of-equilibrium active matter using various interparticle forces.

First, we introduce the means to promote the equilibrium self-assembled structures driven by adsorption of colloids at interface. Typically, adsorption of colloids at interface is …

Applications Of Chemically Modified Nitrogen Doped Carbon, Zirconium Phosphate, Metal Organic Frameworks, And Functionalized Graphene Oxide Nanostructured Adsorbents In Water Treatment, Ayyob Mohammed A Bakry

Theses and Dissertations

Water contaminations by many pollutants, especially heavy metals such as Pb(II), Hg(II), Cu(II), Cd(II), and Cr(VI) pose many public health and environmental concerns as reported in the list of hazardous substances compiled by the US Environmental Protection Agency due to their high toxicity, refractory degradation, and ease of entering food chain. Adsorption by chelating resins is proven to be the most effective method for the extraction of metal ions from polluted and wastewater. However, traditional absorbents such as activated carbon, activated alumina, clay, zeolite, etc., show limited adsorption abilities for these heavy metal ions. The major goal of this thesis …

Temperature-Dependent Kinetic Studies Of Arsenicals Adsorption From Solution To Hematite Nanoparticles, Sara Soldoozy

Theses and Dissertations (Comprehensive)

Surface chemistry is the study of the chemical and physical phenomena that transpire at interfaces such as liquid-solid, solid-gas, liquid-gas, and liquid-liquid. To study the reactions occurred at the surfaces, surface sensitive techniques come to play. Adsorption of arsenical compounds (liquid adsorbate), particularly arsenate (iAs) and dimethylarsinic acid (DMA), to the surface of iron bearing materials (solid adsorbent) that frequently are found in geosorbents such as hematite (Fe₂O₃) has been studied in this thesis. Arsenical compounds can pollute the environment through natural sources and anthropogenic activities, and ultimately contaminate water. Absorbing these pollutants to a material …

Effects Of So2 In Air On Performance Of Direct Methanol Fuel Cell, Bin Qin, Fen-Ning Jing, Xue-Jing Sun, Gong-Quan Sun, Hai Sun

Journal of Electrochemistry

Direct methanol fuel cells (DMFC) generally use oxygen as an oxidant. Contaminants such as sulfides and nitrides in the air can affect the performance of the DMFC. In this work, the effects of SO₂ on the performance of DMFC were investigated and the mechanism of poisoning was analyzed, by means of constant current discharge curve, polarization performance curve, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). In the CV scan, the permeated methanol was oxidized at a low potential to eliminate its effect on the SO₂ poisoning behavior test. The results showed that the SO₂ poisoning resulted …

Atom-Specific Activation In Co Oxidation, Simon Schreck, Elias Diesen, Jerry Larue, Hirohito Ogasawara, Kess Marks, Dennis Nordlund, Matthew Weston, Martin Beye, Filippo Cavalca, Fivos Perakis, Jonas Sellberg, André Eilert, Kyung Hwan Kim, Giacomo Coslovich, Ryan Coffee, Jacek Krzywinski, Alex Reid, Stefan Moeller, Alberto Lutman, Henrik Öström, Lars G. M. Pettersson, Anders Nilsson

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

We report on atom-specific activation of CO oxidation on Ru(0001) via resonant X-ray excitation. We show that resonant 1s core-level excitation of atomically adsorbed oxygen in the co-adsorbed phase of CO and oxygen directly drives CO oxidation. We separate this direct resonant channel from indirectly driven oxidation via X-ray induced substrate heating. Based on density functional theory calculations, we identify the valence-excited state created by the Auger decay as the driving electronic state for direct CO oxidation. We utilized the fresh-slice multi-pulse mode at the Linac Coherent Light Source that provided time-overlapped and 30 fs delayed pairs of soft …

Experimental Evaluation Of Uranyl Transport Into Mesoporous Silica Gel Using Fluorescence, Brandon M. Dodd

Theses and Dissertations

This research investigated parameters that can affect the use of nanoporous silica gel as a media for accumulating a detectable amount of uranium. The unique fluorescence of the Uranyl (UO₂²⁺) ion was used to evaluate the transport kinetics and accumulation within silica gel in a static fluid and under pressure driven flow. The addition of fluid flow decreased the time constant from on the order of an hour to approximately 2s with a very low fluid velocity of 0.36cm/s. The 0.36cm/s fluid velocity was found to be the critical velocity above which there was no gain in …

Functionalization Of Metal Oxide Surfaces Through Chemical Reactions And Physical Adsorption, Gabriel C. Graffius

Seton Hall University Dissertations and Theses (ETDs)

The synthesis of high surface area metal oxides is an area of extensive research with potential applications in catalysis, adsorption, and materials chemistry. The functionalization of a material’s surface can dramatically change its physical and chemical properties. The research described herein is built on the foundation of traditional techniques used for synthesis, characterization, and functionalization of metal oxides and develops new mechanisms and materials for the functionalization of surfaces.

We began with Methyl-terminated poly(dimethylsiloxanes) (PDMSs), which are typically considered to be inert and not suitable for surface functionalization reactions because of the absence of readily hydrolysable groups. Nevertheless, these siloxanes …

Rambling Between "Zhong Yong" And "Catalysis", Zi-Dong Wei

Journal of Electrochemistry

“Zhong Yong” represents a traditional Chinese wisdom, which was first proposed by Confucius and continuously richened by his followers. “Zhong Yong” pursues the balances among all kinds of contradictions, and insists that neither “too much” nor “not enough” is good. For a successful catalyst, on which the adsorption of reactants must be not so strong and not so weak either. On this point of view, there are the same pursuits for “Zhong Yong” and catalysis. In this paper, the author starts his story with a conversation between Confucius and his student, followed by 3 interesting stories happening in the ancient …

Degradation And Exciton Energy Transfer Studies In Single-Walled Carbon Nanotube Bundles, Abhishek Gottipati

Legacy Theses & Dissertations (2009 - 2024)

Single walled carbon nanotubes (SWNTs) due to their unique optical behavior, large surface area, robust mechanical strength and electrical properties make them one of the ideal candidates for sensing and opto-electronic applications. In this work, we explore the energy transfer (exciton energy transfer-EET) phenomena occurring between nanotubes in bundles, using resonance Raman spectroscopy.

Ab-Initio Study Of H2 Adsorption Upon The 001, 110, And 100 Surface Of Magnesium, Thomas F. Armstrong

Theses and Dissertations

Until recently, the only pathway for H2 adsorption onto conventional magnesium thin films was the [001] surface. With the discovery of Mg nanoblade/nanotree fabrication, there are now multiple surfaces for adsorption. A keen understanding of each surface's hydrogen adsorption kinetics is a key part of deciding if these surfaces present a more attractive hydrogen storage material than conventional thin films. This study focused on the use of ab-initio methods to compare the adsorption of H2 molecules onto the [001], [100], and [110] surfaces as well as an analysis of hybrid functionals and their advantages over traditional functionals for minimum energy …

First-Principles Study Of The Electric Field Effect On The Water-Adsorbed Rutile Titanium Dioxide Surface, Abraham L. Hmiel

Legacy Theses & Dissertations (2009 - 2024)

TiO₂ is a semiconducting material that has been used extensively in many industrial applications, and recently has become a candidate for photocatalytic water splitting, fuel cell anode support materials, sensors, and other novel nanodevices. The interface of TiO2 with water, historically well-studied but still poorly understood, presents a ubiquitous environmental challenge towards the ultimate practical usefulness of these technologies. Ground-state density functional theory (DFT) calculations studying the characteristics of molecular adsorption on model surfaces have been studied for decades, showing constant improvement in the description of the energetics and electronic structure at interfaces. These simulations are invaluable in the …

Density Functional Theory Calculations On Hydrated Dimethylarsinic Acid And Iron Oxide Clusters, Adrian Adamescu

Theses and Dissertations (Comprehensive)

Dimethylarsinic Acid (DMA) or (CH₃)₂AsO₂H is an important organoarsenical compound detected in arsenic speciation studies of environmental samples and synthesized during pyrolysis of oil shale. DMA was used historically as a herbicide on large agricultural fields and can be detected in the leachates of landfills rich in waste containing arsenic such as glass, alloys, and semiconductors, as well as biologically pre-treated municipal solid waste. Under certain soil conditions DMA can become bio-available and has the potential to be recycled to more toxic inorganic forms of arsenic. Bioavailability of DMA is largely controlled by the …

Influence Of Electric Field On The Adsorption And Bioactivity Of Hemoglobin On A Macroporous Gold Electrode, Cui-Hong Wang, Yi-Bing Kong, Xing-Hua Xia

Journal of Electrochemistry

The adsorption and bioactivity of proteins at interfaces have been widely studied due to their important role in the construction of biosensors,bioelectronics and biofuel cells.Interfacial electric field is one of the important factors which could affect the adsorption and bioactivity of proteins at materials surfaces.It could dramatically change the adsorption density,molecular conformation and orientation at material surfaces.In this paper,the influence of interfacial electric field on the adsorption kinetics and bioactivity of hemoglobin(Hb) on a three-dimensional(3D) macroporous gold electrode surface has been studied using electrochemical methods and infrared spectroscopy.It was found that the interfacial electric field created excess surface charge which …

Electrochemical Surface-Enhanced Raman Spectroscopy—Current Status And Perspective, Bin Ren, Jian-Feng Li, Yi-Fan Huang, Zhi-Cong Zeng, Zhong-Qun Tian

Journal of Electrochemistry

Electrochemical interface is a very important interface closely related to various energy and life processes. Surface-enhanced Raman scattering was widely used in electrochemistry soon after its discovery to understand the surface bonding,configuration,and orientation of the surface species. In recent 10 years,the fast development of nanoscience and nanotechnology has offered SERS with abundant substrates and characterization methods,which has allowed impressive development of electrochemical SERS. This articles will follow the time line to make systematically overview of SERS on Au and Ag,thin-layer transition-metal SERS,pure transition metal SERS,core-shell SERS and those methods for studying single crystal surfaces,including gap-mode SERS, TERS and SHINERS. Emphasis …

Density Functional Theory Studies Of Surface-Enhanced Raman Spectroscopy In Electrochemical Interfaces, Liu-Bin Zhao, De-Yin Wu, Bin Ren, Zhong-Qun Tian

Journal of Electrochemistry

Quantum chemical density functional theory and Raman scattering theory were used to study the bonding mechanism and surface-enhanced Raman spectroscopy of pyridine adsorbed on transition metals (Ⅷ group) and coinage metals (IB group) . SERS studies of pyridine-metal systems have been reviewed. Chemical bonding mechanism as well as photo-driven charge transfer mechanism was considered to investigate the vibrational frequency shift and the enhancement of SERS intensity in electrochemical interfaces. Our theoretical results can be used to interpret the SERS phenomena dependent on metals,excitation wavelengths,and applied potentials.

The Effect Of Adsorbent Geometry And Surface Chemistry On Hplc Retention, Zhaoxia Liu

Seton Hall University Dissertations and Theses (ETDs)

.

Adsorption And Oxidation Of Phenol Electrode Processes, Bao-Cheng Wang, Yan-Ping Sun, Jin-Hua Zhu

Journal of Electrochemistry

The electrochemical behaviors of platinum electrode were studied by cyclic voltammetry in 1mol/L sulfuric acid solution and 1mol/L sulfuric acid solution contained phenol. The adsorption characteristics of phenol and the intermediat on electrode surface have been discussed. The reactive reversibility and oxidation mechanism of phenol on electrode process have been investigated.The potential of characteristic adsorption was suggested. The various products woud be formed when the electrode potential was greater than the one of characteristic adsorption.

Electrochemical Behavior Of Riboflavin On Glassy Carbon Electrode, Hong Li, Lin-Cai Jiang, Liang-Nian Ji

Journal of Electrochemistry

The electrochemical behavior of riboflavin(RF) on glassy carbon has been investigated by using potential sweep, rotating ring-disc electrode and the measurement of differential capacitance. It is shown that a single well-behaved oxidation-reduction wave corresponding to a reversible two-electrons reaction apears in medium of pH<6, and the adsorption of RFH₂ formed by electro-reduction is weak and hence its solubility is good. In medium of pH>6, there are two separating but overlapping partly oxidation-reduction waves corresponding to two-step one-electron reaction. The adsorptions of RFH and RFH₂ produced by reduction reactions in medium of 6

The Adsorption-Desorption Behaviors Of Β Phenylaminopropiophenone On Iron In Sulphuric Acid Solution, Xianzhang Bu, Dihua Wang, Jinyun Zou, Fuxing Gan

Journal of Electrochemistry

The adsorption-desorption behaviors of β-phenylaminopropiophenone (PAP) on iron in 0.5 mol·L^-1 H₂SO₄ solution with or without halide ions (Cl^-, I^-) were investigated by potentiostatic polarization measurement. The results show that the adsorption of PAP on iron surface follows Flory-Huggins isotherm, the adsorption free energy parameter (f) is positive in H₂SO₄ solution; In the presence of 0.1 mol·L^-1 Cl^-1, when C_PAP ≤ 2×10^-5 mol·L^-1, f＞0. A desorption phenomenon was observed at more positive potential region in anodic polarization curves. Furthermore, the anodic desorption …

Surface Raman Spectra Obtained From Various Electrodeposited Transidon Metals, Jingsong Gao, Bin Ren, Qunjian Huang, Zhongqun Tian

Journal of Electrochemistry

Good quality potential-dependent surface Raman spectra of pyridine were obtained for the first time from a series of transition metals, e. g., Fe, Co, Ni, Ru, Rh, Pd and Pt, which were electrodeposited on non-SERS-active substrates. The influences of the applied potential and the nature of metal on the adsorption behaviors were discussed briefly. This result illustrates that Raman spectroscopy is becoming a more general and powerful tool to study various electrochemical interfaces.

Atomic And Molecular-Perspectives In Electrochemical Interfaces, Zhaowu Tian

Journal of Electrochemistry

The following recent studies on the atomic and molecular-perspectives at electrochemical interfaces using Raman, IR, STM and quantum chemical methed by electrochemistry group in Xiamen University are briefly reviewed. 1.Orientation, charge transfer and bonding of adsorbed molecules. 2. Adsorption effect, electrode potential effect and adatom effect on the electron populations and strength of intramolec ular bonds of the adsorbed molecules. 3. Detailed classification into various types (e. g., competitive, chemically inductive, physical inductive etc.) of coadsorption on electrodes according to the above-mentioned effects.  4. Single crystal face structure effect and adatom effect on the kinetics and the mechanisms of electrocatalytic …

Surface Structure Of √3x√3r 30 Cl/Ni(111) Determined Using Low-Temperature Angle-Resolved-Photoemission Extended Fine Structure, Li-Qiong Wang, Z. Hussain, Z. Q. Huang, A. E. Schach Von Wittenau, Dennis W. Lindle, D. A. Shirley

Chemistry and Biochemistry Faculty Research

A surface structural study of the √3 × √3 R30° Cl/Ni(111) adsorbate system was made using low-temperature angle-resolved photoemission extended fine structure. The experiments were performed along two emission directions, [111] and [110], and at two temperatures, 120 and 300 K. The multiple-scattering spherical-wave analysis determined that the Cl atom adsorbs in the fcc threefold hollow site, 1.837(8) Å above the first nickel layer, with a Cl-Ni bond length of 2.332(6) Å, and an approximate 5% contraction between the first and the second nickel layers (the errors in parentheses are statistical standard deviations only).