Physical Chemistry Commons^™

Tuning Ion Mobility And Molecular Confinement In High-Performance Polymer Electrolytes For Energy Storage, Ezzeldien Yousef Muhammed Yousef

Theses and Dissertations

This research addresses the critical energy density limitations of aqueous supercapacitors, which are traditionally constrained by the narrow electrochemical stability window (ESW) of water 1.23 V. By employing two distinct molecular engineering strategies, this study developed high-performance electrolyte systems that significantly extend voltage stability and thermal resilience.

The first system, CsBr@PAM/HA, utilizes a polyacrylamide and hyaluronic acid hydrogel matrix. This system exploits the chaotropic nature of Cs⁺ ions to disrupt the aqueous hydrogen-bonding network, enhancing ionic conductivity to 104 mS cm^-1. Through systematic salt screening, CsBr was identified as the optimal electrolyte, enabling a stable 2.0 V …

Anthrone-Based Dummy Molecularly Imprinted Polymer For The Selective Detection Of Fluorene And Phenanthrene In Simulated River Water, Aria Pinandita, Nurrahmi Handayani, Muhammad Iqbal, Untung Triadhi, Rusnadi Rusnadi, Samitha Dewi Djajanti, Muhammad Bachri Amran, Muhammad Ali Zulfikar

Makara Journal of Science

A dummy-template molecularly imprinted polymer (DMIP) was synthesized via precipitation polymerization using anthrone as a template analog for the selective analysis of low-molecular-weight polycyclic aromatic hydrocarbons (PAHs), specifically fluorene and phenanthrene. Styrene, benzoyl peroxide, and ethylene glycol dimethacrylate were employed as the functional monomer, radical initiator, and crosslinking agent, respectively. The synthesized polymers were characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy, and particle size analysis. The imprinting factors were 1.16 and 1.09 for fluorene and phenanthrene, respectively, indicating enhanced affinity of the imprinted sites. High-performance liquid chromatography analysis following DMIP-based solid-phase extraction yielded recoveries of 91.49% ± 3.87% for …

Complementary Design Of Optical And Photochemical Systems, Joshua Plank

Chemistry Theses and Dissertations

The ability to manipulate chemical systems has been prized through history as the bridge between the macroscopic and microscopic worlds. As an example, the camera obscura has arguably existed since the earliest days of humanity; however, it was the discovery of early silver halide chemistry that lead to the ability to fix these images into the earliest photographs. In modern photolithography employed in electronics manufacturing, the primary resolution limits arise not from the chemistry of the molecules involved, but from the limits of the systems used to project light. Thus, as much as photochemistry advances, optical imaging and projection techniques …

Trade-Off Between Limonene & Geraniol-Based Reprocessable And Non-Reprocessable Epoxy Thermosets: Role Of Aliphatic Diamines In Polymer Networks Design, Priyankkumar Kanubhai Patel

Electronic Theses & Dissertations

The growing demand for sustainable materials, driven by environmental concerns and the rapid depletion of fossil fuels, has garnered significant attention in the fabrication of bio-based epoxy thermosets as renewable alternatives to petroleum-derived thermosetting polymers. The present study focuses on the synthesis and characterization of epoxy prepolymer resins derived from limonene and geraniol via a two-step process, followed by the fabrication of thermally cross-linked flexible epoxy thermoset films using various traditional aliphatic diamine curing agents, namely 1,2-ethylenediamine (EDA), 1,4-butylenediamine (BDA), and 1,6-hexamethylenediamine (HDA). Additionally, the incorporation of cystamine, a disulfide-containing diamine, enabled the formation of a covalent adaptable network through …

Effects Of Structure Of Mepegn Polymers On Hydroxide Conductivity In Anhydrous Anionic Exchange Membranes, Athan M. Gregory

Honors Theses

Anhydrous hydroxide ion (OH-) conducting polymer electrolytes composed of a 1-methyl-pyrrolidinium (1mp) head group linked to various MePEGn (n = 3, 7, 12) backbones were prepared. We have examined the structure of these anion exchange membranes to observe how the structure of the electrolyte affects the observed ionic conductivity. The structural parameters investigated were polymer length, viscosity, fractional free volume (FFV), and volume fraction of PEG (Vf,PEG), and each polymer varied in these properties. Through a comparison of the conductivity and structural parameters in the MePEGn-based anion electrolytes, we have shown that each of these structural properties weakly affects the …

Computational Analysis Of Proton Conductivity Factors In Grotthuss-Style Mechanisms, Brock Dyer

Physics and Astronomy Honors Papers

The mechanism and fundamental molecular properties involved in proton conduction are discussed. Four calculable properties are presented: the proton affinity, binding energy (between protonated and neutral forms), intramolecular tautomerization barrier, and proton hopping barrier. An overview of the computational methods used in this thesis, including an introduction to the many-body Schrödinger equation and Density Functional Theory, as well as a look at Plane-Wave Density Functional Theory and Gaussian-Type Orbital Density Functional Theory are presented. 4,5-dimethyl-[1,2,3]-triazole is used as a model system, with 10 variations being generated with varying amounts and positions of fluorine substitution on the methyl groups. Preliminary calculations …

Modified N-Heterocyclic Carbene Catalysts For Polyurethane Synthesis, Charise D. Young

Pomona Senior Theses

Polyurethanes are widely used polymers synthesized from diisocyanate and diol molecules. They are ubiquitous polymeric materials with important industrial applications. Their increasing market value prompts the need for selective and efficient production which can be achieved through N-Heterocyclic carbene (NHC) catalysis. N-heterocyclic carbenes are heterocyclic molecules containing a carbene atom and at least one nitrogen adjacent to the carbene center. The nitrogen substituents on the adjacent nitrogen play an important role in influencing their steric and electronic properties and resultant reactivity.^1,2 There is a lack of a comprehensive understanding of the steric and electronic properties of NHCs and how …

Polybenzodiazine Aerogels: All-Nitrogen Analogues Of Polybenzoxazines - Synthesis, Characterization, And Their Application In Carbon Dioxide Capture, Vaibhav Edlabadkar

Doctoral Dissertations

"The rapidly risen concentration of carbon dioxide in the atmosphere over recent years contributed to global warming and ocean acidification. Carbon capture is viewed as an essential tool from keeping atmospheric CO₂ levels from rising further. This thesis focuses on the development of new materials for high capacity and selective adsorption of CO₂. One such material was based on a newly synthesized tetrahydroquinazoline (THQ), which was designed as an all-nitrogen analogue of main-stream benzoxazine monomers. THQ solutions in DMF gelled at 100 °C via HCl-catalyzed ring opening polymerization to polybenzodiazine (PBDAZ) wet gels, which were dried in …

Characterization And Optimization Of Sand And Tung Oil-Based Resins For Binder-Jet 3d Printing, Daniel I. Ajiola

College of Graduate Studies: Theses & Dissertations

Binder-jet 3D printing as a transformative technology in additive manufacturing, offers the ability to fabricate complex structures with diverse materials. This thesis investigates the use of a sustainable tung oil-based resin to create composites, exploring the potential for an eco-friendly alternative to synthetic binders.

The aim of this research is to develop and characterize a bio-based resin formulation, using tung oil as the primary binder, for application in binder-jet 3D printing with sand as the reinforcement. The resin formulation was prepared by combining tung oil, n-butyl methacrylate, divinylbenzene, and di-tert-butyl peroxide in precise proportions, ensuring a balanced mixture that supports …

Individual And Collective Properties Of Tunable Photochemical Belousov-Zhabotinsky Micro-Reactors, Kudakwashe Benedict Shumba

Graduate Theses, Dissertations, and Problem Reports (ETD)

Cell-like model chemical systems are powerful tools that can be used to explore the role of intercellular coupling on population level behaviors in communities of biological cells. Firstly, we present a new method for fabricating such micro-reactors using the photosensitive Belousov–Zhabotinsky (BZ) reaction system employed in silica microparticles. These BZ micro-reactors have a tunable response to photochemical coupling, varying from a fully excitatory response to a fully inhibitory response. Their response can be tuned through variations in either the reactive mixture or, on an individual micro-reactor level, by changes in the synthesis temperature used during the fabrication of the silica …

Synthesis Of Photocleavable Molecules For Neurological Applications, Nishal Madujith Egodawaththa Arachchilage Don

Theses and Dissertations

In recent biomedical research, the precise control of molecular dynamics through light activation has emerged as a powerful tool, particularly in the field of neurobiology. This approach involves the use of photocleavable cages or photoprotective groups (PPGs) that are chemically tethered to biologically active molecules such as neurotransmitters or calcium chelators. These cages remain inert until exposed to specific wavelengths of light, typically in the visible range, triggering the release of the active compound with high spatiotemporal precision.

For neurotransmitter systems, such as glutamate (Glu), which plays a critical role in synaptic transmission and memory formation, researchers have developed novel …

Thermal Effects On The Voc-Sensitive Polydimethylsiloxane Holographic Gratings, Aleksandra Hernik, Faolan Radford Mcgovern, Patrick Iftime, Izabela Naydenova

Conference Papers

The imperative for monitoring volatile organic compounds (VOCs) emerges from their harmful impact on human health when inhaled excessively over a long term. Polydimethylsiloxane (PDMS), valued for its transparency and excellent flexibility, has already been demonstrated as a promising biocompatible and cost-effective transducer for optical VOCs sensing. Moreover, it facilitates further functionalisation with adsorbing materials to enhance sensitivity and selectivity for specific VOCs detection. We fabricated and examined PDMS-based surface diffraction gratings after exposure to selected VOCs, demonstrating different response for polar and non-polar molecules. Investigated gratings were prepared by replicating sinusoidal surface relief structures inscribed in acrylamide photopolymer using …

The Effects Of Free Volume And Processing On The Development Of Gas Separation Membranes, Jacob Schekman

Dissertations

Structure, thermal, mechanical, gas transport, and free volume properties of thiol-ene based systems are investigated and discussed. In the pursuit of generating low energy-cost polymer membranes for gas separation, it became apparent that UV-curing of thiol-ene materials presented several routes toward achieving this goal. Network structure plays a vital role in determining the gas transport properties of membrane materials. UV photopolymerization techniques provide a means to rapidly vitrify network morphologies which can be tuned depending on choice of monomer. Thiol-ene monomers offer a broad range of precursor materials from which to choose for the design of functional membrane materials.

Chapter …

Thin-Film Nanocomposite Membranes With Alumina Nanoparticles For Textile Wastewater Treatment Applications, Amr Mohamed Tayel

Theses and Dissertations

Thin-film nanocomposite (TFN) membranes are gaining great interest in industrial wastewater treatment due to their superior performance, especially for higher water flux and pollutants’ rejection, as well as improved chemical, thermal and mechanical stabilities, compared to other types of membranes. The performance of TFN membranes can be enhanced using different types of nanofillers, among which ceramic nanomaterials, such as Al2O3, offer a promising potential for applications involving treatment of industrial wastewater such as textile effluents, and this is due to their stability, hydrophilicity, and relative low cost. The study of the TFN membrane properties and structure allows the optimization and …

Studies Towards Mechanistic Understanding Of The Suzuki-Miyaura Catalyst-Transfer Polymerization, Mitchell Tyler Howell

Graduate Research Theses & Dissertations

Semiconducting organic conjugated polymers show major promise for the manufacturing of organic electronic and optoelectronic devices. Their utility comes from inherent conductivity, elasticity, processability and low weight paving the way towards novel materials and applications. The molecular weight, polydispersity, and precise incorporation of structural elements into the conjugated backbone are among the important parameters that affect a conjugated polymer’s mechanical and electrical properties. Therefore, precise control over such parameters provides a path for electronic materials with tunable properties tailored for a specific application. Recent success in this endeavor has been achieved with Suzuki-Miyaura Catalyst-Transfer Polymerization (SCTP) which is a transition …

Use Of Interlaboratory Studies For The Development Of Consensus-Based Criteria For The Elemental Analysis Of Electrical Tapes, Lacey M. Leatherland

Graduate Theses, Dissertations, and Problem Reports (ETD)

Tape evidence is often used in criminal cases involving violent crimes, kidnappings, improvised explosive devices (IEDs), and drug trafficking. This evidence can reveal potential links between suspects, items, or scenes. The forensic examination of electrical tape can provide investigative leads or offer support to alternative hypotheses evaluated in the courtroom. A conventional analytical scheme includes microscopic examination, Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy Energy Dispersive Spectrometry (SEM-EDS), and Pyrolysis Gas Chromatography Mass Spectrometry (Py-GC/MS). Elemental analysis of electrical tapes is commonly achieved using SEM-EDS; however, recent scientific literature suggests that this analysis can evolve from using SEM-EDS to …

Exploring Soybean Oil-Based Polyol And Effect Of Non-Halogenated Flame Retardants In Rigid Polyurethane Foam, Sahithi Kondaveeti

Electronic Theses & Dissertations

To address the increasing demand for sustainable biomaterials due to the depletion of fossil fuel resources and growing environmental concerns, a new type of biodegradable and environmentally friendly rigid polyurethane foam (RPUF) has been synthesized. These foams are derived from chemically modified soybean oil-based polyol obtained from soybean oil by epoxidation followed by a ring-opening reaction. Polyurethane foam is generally used in construction, furniture, and automobile industries but is highly flammable and releases toxic gases and smoke during combustion. In this study, a highly efficient synergistic effect halogen-free flame-retardant (FR) melamine salt, 2-carboxyethyl(phenyl)phosphinic acid melamine salt (CMA) was synthesized from …

Enhanced Mechanical Strength Of Soybean Oil-Based Non-Isocyanate Polyurethane Adhesive For Wood Application By Introducing Nanofillers, Vatsal Chaudhari

Electronic Theses & Dissertations

Polyurethane (PU) is a versatile material that finds extensive use in various industries including bedding, construction, automotive, and packaging. Historically, this particular polymer relied significantly on petrochemical resources, a practice that was considered to have negative environmental impacts. The conventional method for preparing PU involves the use of isocyanate, which is a disadvantage due to its negative impact on the environment and human health. The resolution of this problem entails identifying an appropriate substitute for petroleum-derived products that minimize their impact on both the environment and human health. The researchers earlier utilized soybean oil, for the formulation of PUs in …

Castor Oil Polyol-Based Adhesives With Additional Crosslinker For Improvement In Mechanical And Thermal Properties., Yash Desai

Electronic Theses & Dissertations

Polyurethanes (PU) have been promising polymeric materials with many applications, including adhesives. Projecting an estimated revenue from 42.8 billion $ in 2021 to 61.5 billion $ by 2026. However, a large number of PU adhesives are sourced from petroleum products. Therefore, to lower the dependence on non-renewable resources and provide sustainable and affordable alternatives. In this work will synthesize bio-based adhesives of polyurethane from modified castor oil-based polyol. Generally, polyurethane reaction depends on the properties of polyol and isocyanates. The most important aspect of these reactions is the OH number of the polyol, which is responsible for the crosslinking and …

The Effect Of The Carbon Nanotubes’ Surface Area On The Morphology And Performance Of Cellulose Acetate Nanocomposite Membranes In Nanofiltration Applications, Nouran Elbadawi

Theses and Dissertations

Population increase and climate change have significantly affected the availability of fresh water for consumption. Studies by UNESCO showed that more than 28% of the world population didn’t have access to clean safe drinking water in 2020. This situation is expected to get more serious over the coming 30 years with the limited availability of natural fresh water sources. The need to find solutions from alternative non-freshwater resources for drinking or irrigation is becoming a necessity. Within the context of desalination technologies, thousands of investigations are conducted to find the cheapest most efficient way of water treatment aiming at expanding …

Magnetic Interactions In Open-Shell Conjugated Polymers, Michael Steelman

Dissertations

Most materials are closed shell in which every electron participates in a bond, resulting in unremarkable magnetometry signatures and functionalities. While rare, modern technologies rely on magnetic materials in which unpaired electrons are localized to inorganic atomic centers. In recent decades, a collection of organic open-shell π-conjugated molecules have shown magnetic ordering, albeit at exceedingly low temperatures; a result of weak noncovalent intermolecular interactions limiting long range electronic exchange. Thus, practically applicable sp orbital magnetism that persists at or above room temperature remains a grand challenge for chemistry and physics. Despite the wide variety of chemical structures afforded by organic …

Converting Hydrazone-Based Photoswitches Into Functional Materials, Sirun Yang

Dartmouth College Ph.D Dissertations

The development of new classes of molecular switches with enhanced performance and brand-new functionalities enables practitioners to push the frontiers of adaptive materials. In the realm of photoswitches, the bistability of hydrazones (i.e., molecules that incorporate the C=N-NH functional group) allows for the kinetic trapping of polymer and supramolecular assemblies resulting in multistate actuation and emergent phenomena that are not tractable with other photoswitches. This property has transformed hydrazone photoswitches into powerful tools that can be used in understanding fundamental molecular interactions and how to apply them in modulating the physicochemical properties of materials.

Progressing from disordered to …

Designing Dynamic And Degradable Polymeric Materials With Thiol-X Chemistries, Reese Sloan

Dissertations

With plastic production poised to increase in coming years, there arises a need to develop new polymeric materials designed to combat the global pollution crisis. A commonly utilized approach in addressing this challenge is to employ a responsive functional moiety into the polymer architecture. Thiol-X reactions, a commonly utilized class of “click” reactions, have garnered broad implementation in new stimuli-responsive materials. This work specifically focuses on utilizing radical-mediated thiol-ene coupling and base-catalyzed thiol-isocyanate reactions to develop a library of ternary thiol-ene/thiourethane covalent adaptable networks (CANs) and hydrolytically labile poly(thioether ketal) thermoplastics. CANs are a class of network materials capable of …

Analysis Of The Light Responsive Azobenzene Peptide Nucleic Acid Duplexes, Kat Nguyen

Honors College Theses

Peptide nucleic acids (PNAs) are oligonucleotide analogues in which the sugar-phosphate backbone has been replaced by a pseudopeptide skeleton. Since PNAs use the natural nucleobases (Adenine, Thymine, Cytosine, Uracil, and Guanine) found in either DNA and/or RNA, they are able to hybridize according to Watson-Crick base-pairing to form duplexes. PNA is a promising therapeutic agent because they can function as antigene or antisense chemical agents. To further enhance their utility, we aim to incorporate a photoswitchable moiety using azobenzene. Here, we report the results of the synthesis and purification of a photoswitchable 11 mer PNA along with initial characterization efforts.

Molecular Engineering Of Self-Immolative Polymers As Chemically Responsive Temporary Adhesives For Protective Garments, Hana J. Yarbrough

Dartmouth College Master’s Theses

The long-term goal of this thesis is to design novel chemical protective garments that both shield and sense for chemical warfare agents. The overarching hypothesis of this work is that joining textiles with a chemically responsive temporary adhesive will reduce the permeability of and detect hazardous analytes across fabric boundaries. Work towards achieving this goal and testing this hypothesis is separated into two chapters. The first chapter reports the development of a self-immolative polymer, poly(phthalaldehyde), into a stimuli-responsive temporary adhesive. Developing poly(phthalaldehyde) as a robust adhesive that rapidly releases substrates would be a significant and novel contribution to the fields …

Controlling Degradation With Force And Light, Brad Davis

Dissertations

Stimuli-responsive polymers respond to changes in their environment by altering their physical and chemical properties. Their responsiveness allows them to be used as sensors, mechanical actuators, delivery systems, and can yield either elongated lifetimes through healing mechanisms or shortened lifetimes through triggered degradation. Still a growing field in polymer science, researchers seek to expand the capabilities of these materials by improving their specificity, range, and mechanisms of both the stimuli and the response. The work presented explores stimuli-responsive materials, focusing on mechanical and light stimuli, and how to gain control of the response by specific changes in the polymeric material. …

Doping Of Conjugated Polymers: Preparation, Characterization And Device Fabrication, Kan Tang

Dissertations

Semiconducting conjugated polymers (CPs) as emerging materials for advanced electronic applications such as sensors, OPVs, and OEFTs has become an intriguing research topic in the past decades. It opens a new avenue of “flexible” electronics, which has shown great potential in next-generation electronic devices.

However, due to the nature of CP materials and related solution processing techniques, unlike almost perfectly crystalline silicon materials, CPs in the solid-state often exhibit much lower crystallinity if it is not complete amorphous, which severely hinder the electronic property and optical property of the materials. The crystallinity of CPs in a film is often uniquely …

Nitro Group Reduction For Use In Organic, Cathodic Materials, Brock G. Goeden

Honors Thesis

The industrial demand for higher capacity, light-weight battery materials has skyrocketed in recent years due to heavy investments in portable electronics, electronic vehicles, and renewable energy sources. However, rechargeable battery technology has seen little improvement since the invention of the Lithium-Ion battery in the 1980s. The low energy density of the traditionally utilized LiCoO2 cathodic material (specific capacity: 272 mAh g-1), has limited its potential to meet these increasing demands. To solve this problem, our research group is investigating new types of lightweight, organic, polymeric materials with conductive backbones as a possible replacement for the cathodic materials in Lithium-Ion batteries. …

Effects Of Resin Chemistries On The Selective Removal Of Industrially Relevant Metal Ions Using Wafer-Enhanced Electrodeionization, Humeyra B. Ulusoy Erol, Christa N. Hestekin, Jamie A. Hestekin

Chemical Engineering Faculty Publications and Presentations

Wafer-enhanced electrodeionization (WE-EDI) is an electrically driven separations technology that occurs under the influence of an applied electric field and heavily depends on ion exchange resin chemistry. Unlike filtration processes, WE-EDI can be used to selectively remove ions even from high concentration systems. Because every excess ion transported increases the operating costs, the selective separation offered by WE-EDI can provide a more energy-efficient and cost-effective process, especially for highly concentrated salt solutions. This work reports the performance comparison of four commonly used cation exchange resins (Amberlite IR120 Na⁺, Amberlite IRP 69, Dowex MAC 3 H⁺, and …

Proto-Rna Synthesis Using Glycerol And Phosphate Anion, Noah Parker

Williams Honors College, Honors Research Projects

Nucleic acids are important molecules for all life, serving as the primary molecules for information storage and reproduction. RNA has long been thought to be the molecule that initiated protein synthesis. However, RNA has recently been thought to be too complex to synthesize prebiotically. Through a 1:1 mole ratio condensation of glycerol and phosphoric acid, I generated glycerol-phosphate oligomers that resemble a primitive form of the carbon-phosphate backbone of RNA. 75 mmol MgCl2 was added to some samples to see if the Mg cation could stabilize the reaction intermediates and further promote longer proto-RNA oligomers. These samples were all heated …