Physical Chemistry Commons^™

Reconstruction Of Distributions Of Nanoparticles Or Electroactive Nano-Components In Electrochemical Arrays Based On Chronoamperometric Data, Alexander Oleinick, Oleksii Sliusarenko, Irina Svir, Christian Amatore

Journal of Electrochemistry

The main scope of this work was to elaborate and test a simple mathematical and numerical procedure for reconstructing the probability density distributions f(ρ) characterizing the distribution of electroactive or electrocatalytic nano-components present or deposited on the electrochemically-inert surface of a planar conductor based on the time-dependent chronoamperometric responses of the corresponding electrochemical array. The mathematical and numerical validity of the procedure was established for three types of arrays (one periodical, two involving random dispersions) involving near-spherical nano-components dispersed on a flat surface. Indeed, altogether, these three types represent most 2D-experimental electrochemical nano-arrays used for analytical or electrocatalytic purposes. This …

Comparative Studies Of Fe, Ni, Co And Their Bimetallic Nanoparticles For Electrochemical Water Oxidation, Maduraiveeran Govindhan, Brennan Mao, Aicheng Chen

Journal of Electrochemistry

The design of efficient, durable, and earth-abundant electrocatalysts via environmentally compatible strategies for the oxygen evolution reaction (OER) is a vital for energy conversion processes. Herein we report a facile approach for the fabrication of low-cost and earth abundant metal catalysts, including iron (Fe), nickel (Ni), cobalt (Co), CoNi, and CoFe nanoparticles (NPs) on titanium (Ti) substrates through a one-step electrochemical deposition. Field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD) spectrocopy, X-ray photoelectron spectroscopy (XPS), and electrochemical techniques were employed to characterize these nanoparticles. Our electrochemical results revealed that among the five synthesized nanomaterials, the …

Impact Of Nafion Loading And Anion Adsorption On The Synthesis Of Pt Monolayer Core-Shell Catalysts, Lijun Yang, Dustin Banham, Elod Gyenge, Siyu Ye

Journal of Electrochemistry

Carbon supported palladium (Pd) nanoparticles were used as a model core material for the synthesis of platinum (Pt) monolayer core-shell catalysts using rotating disk electrode method and a copper (Cu) under potential deposition technique. The impact of Nafion on the synthesis process was revealed by electrochemical testing with various Nafion contents. The existence of Nafion influenced the Cu under potential deposition, galvanic replacement and eventually the oxygen reduction reaction activity of the core-shell catalyst. However, as long as the Nafion content was less than 5 wt% in the test film, adding Nafion could help to bind catalyst onto the surface …

Green Electrochemical Ozone Production Via Water Splitting: Mechanism Studies, Gregory Gibson, Wenfeng Lin

Journal of Electrochemistry

The green and energy-efficient water splitting reaction using electrocatalysis for O₃ formation provides a very attractive alternative to the conventional energy-intensive cold corona discharge (CCD) method. Among a large number of electrocatalysts explored for the electrochemical ozone production, β-PbO₂ and SnO₂-based catalysts have proven to be the most efficient ones at room temperature. In this study Density Functional Theory (DFT) calculations have been employed to investigate the possible mechanisms of ozone formation over these two types of catalysts. For both the β-PbO₂ and Ni/Sb-SnO₂ (nickel and antimony doped tin oxide) catalysts the (110) facet …

Comparison Of Oxygen Reduction Reaction Activity Of Pt-Alloy Nanocubes, Yongan Tang, Lin Dai, Shouzhong Zou

Journal of Electrochemistry

Alloying Pt with the first row non-noble transition metals has been demonstrated to increase the catalytic activity toward oxygen reduction reaction (ORR), which is the cathode reaction of the proton exchange membrane fuel cells (PEMFCs) and metal-air batteries. However, how much the ORR activity improvement comes from the alloying elements remains controversial. In this paper, the nanocubes of PtMn, PtFe, PtCo, and PtNi with the similar size and composition were prepared and their ORR activities were explored, in order to investigate the effects of alloying elements on the catalytic activity. The use of cubic shape particles minimizes the contribution to …

Resistive-Pulse Analysis Of Single Phospholipid Vesicles Using Quartz Nanochannels, Jonathan T. Cox, Bo Zhang

Journal of Electrochemistry

We report the uses of resistive-pulse method and quartz nanochannels for the detection and size analysis of single vesicles. Cylindrical shape quartz nanochannels have been used to detect single phospholipid vesicles ranging from 100 to 300 nm and polystyrene nanoparticles ranging from 170 to 400 nm in diameter. Translocations of single vesicles and nanoparticle were detected as individual square current pulses, which could be used to determine particle size. Our results show excellent agreement between the particle/vesicle sizes obtained from nanochannels and those from dynamic light scattering (DLS) and scanning electron microscopy (SEM). This electronic-based method was found to be …

Electrodeposition Of Ruo2 Layers On Tio2 Nanotube Array Toward Co2 Electroreduction, Bei Jiang, Lina Zhang, Xianxian Qin, Wenbin Cai

Journal of Electrochemistry

RuO₂/TiO₂ composite materials have multitude of electrocatalytic applications including but not limited to CO₂ reduction reaction (CO₂RR). RuO₂/TiO₂ electrodes were previously prepared by repetitive coating and thermal decomposition (TD) of a Ru(III) precursor solution on Ti substrate. In this work, electrochemical potential cycling is applied to deposit amorphous RuO₂ (α-RuO₂) layers onto TiO₂ nanotube array (TNA) (RuO₂^CV/TNA) preformed on Ti foil. SEM, GIXRD, and voltammetry are applied to characterize the structures of the resulting RuO₂^CV/TNA. Ru loading on the RuO_{2 …}

Electrografting Of Mono-N-Boc-Ethylenediamine From An Acetonitrile/Aqueous Nahco3 Mixture, Hamzah Hisham, Denuault Guy, Bartlett Philip, Pinczewska Aleksandra, Kilburn Jeremy

Journal of Electrochemistry

The electrografting of primary amines to carbon electrodes is now widely employed for electrode modification. Using a mixture of acetonitrile and 0.1 mol⋅L^-1 aqueous sodium hydrogen carborate (NaHCO₃) in the ratio of 4:1, the efficiency for coupling of mono-N-Boc-ethylenediamine (EDA-Boc) on the surface of glassy carbon was significantly improved as compared with that obtained using acetonitrile alone. In the presence of NaHCO₃ the initial current determined in the cyclic voltammogram became higher, and the layer of attached amine was formed more rapidly, accordingly, the electrode was passivated more rapidly. The resulting film of EDA-Boc was shown …

Analyzing The Kinetics Of A Bromophenol Blue Fading Reaction In Basic Conditions For An Undergraduate Lab, Zeljka Popovic

Georgia College Student Research Events

Bromophenol blue is a common pH indicator and dye used in many different industries. Once a solution of bromophenol blue is placed in a concentrated basic solution, the color fades from a blue/violet color to clear solution with a pH of 4.6 or greater. The rate law of the reaction is analyzed through the use of a small footprint visible-near-infrared spectrometer (Vis-NIR) with a diode array detector. An absorbance wavelength of 590 nm as a function of time was collected using Ocean Optics OceanView software. The results contained in the data collection file are exported to a spreadsheet for further …

Oxidation Of Substituted Catechols At The Air-Water Interface: Production Of Carboxylic Acids, Quinones, And Polyphenols, Elizabeth A. Pillar, Marcelo I. Guzman

Chemistry Faculty Publications

Anthropogenic activities contribute benzene, toluene, and anisole to the environment, which in the atmosphere are converted into the respective phenols, cresols, and methoxyphenols by fast gas-phase reaction with hydroxyl radicals (HO(•)). Further processing of the latter species by HO(•) decreases their vapor pressure as a second hydroxyl group is incorporated to accelerate their oxidative aging at interfaces and in aqueous particles. This work shows how catechol, pyrogallol, 3-methylcatechol, 4-methylcatechol, and 3-methoxycatechol (all proxies for oxygenated aromatics derived from benzene, toluene, and anisole) react at the air-water interface with increasing O3(g) during τc ≈ 1 μs contact time and contrasts their …

Environmentally Friendly Synthesis Of Transition Metalorganic Hybrid Nanocomposites, Aubrey N. Penn

Masters Theses & Specialist Projects

Research on metal nanoparticles (MNPs) synthesis and their applications for optoelectronic devices has been a recent interest in the fields of nanoscience and nanotechnology Photovoltaics are one of such systems in which MNPs have shown to be quite useful, due to unique physical, optical, magnetic, and electronic properties, including the metal nanoparticles synthesized in this research.

Owing to the challenges with the most common physical and chemical methods of preparing MNPs, including the use of high temperatures, toxic reducing agents, and environmentally hazardous organic solvents, there is a critical need for a benign synthesis procedure for MNPs. In this work, …

Regiospecific P-Bromination Of Activated Aromatic Systems – Greener Approach, Elnaz Jalali

Masters Theses & Specialist Projects

The halogenated derivatives of heterocyclic compounds (haloarenes) are highly utilized in many fields of chemistry, including drug discovery, medicinal, and material chemistry. There are a variety of ways to functionalize an aromatic system and introduce halogen substituent into the ring. However, electrophilic aromatic substitution (EAS) has been the focus of growing attention, particularly for electronrich substrates.

Electrophilic aromatic bromination protocols are one of the most important electrophilic aromatic substitution reactions. However, preparation of bromoarenes classically recommends the use of highly oxidative agents along with utilizing various metal catalysts in a halogenated solvent. The corrosive and toxic nature of these reagents …

Tio2/Pdms Buoyant Photocatalyst For Water Remediation And Cu‑Rbs Organic/Inorganic Hybrid For Thermoelectric Applications, John R. Bertram

Masters Theses & Specialist Projects

Two novel materials have been developed: TiO2/poly(dimethylsiloxane) (PDMS) beads as buoyant photocatalyst materials for water remediation, and copper rhodamine‑B silane (Cu‑RBS) as an n ‑type organic/inorganic hybrid for thermoelectric applications. The approach to incorporate TiO2 into low‑density PDMS beads addresses many of the challenges traditionally encountered when creating buoyant photocatalysts, an area which is crucial for wide‑spread remediation of water resources, including natural bodies of water. The performance and reusability of the buoyant photocatalyst materials, demonstrated by using methylene blue as a model degradation target, is strong enough for environmental application. The use of a kinetic model and the introduction …

Theoretical Study Of Ozone Forming Recombination Reaction And Anomalous Isotope Effect Associated With It, Alexander Teplukhin

Dissertations (1934 -)

The ozone forming recombination reaction stands out among many chemical processes that take place in the atmosphere. This reaction is responsible for the reconstruction of ozone layer, which protects life on Earth from harmful ultra-violate radiation and is a source of so-called anomalous isotope effect in ozone. The reaction was intensively studied, but at a very basic level. There were only couple of papers where the recombination rate coefficient was computed and found to roughly agree with the experimental data. In this dissertation, the recombination process in ozone is approached using new and efficient method, which includes several modern techniques. …

On The Structure And Properties Of S-Nitrosated Cysteine Models: A Computational Study, Dmitry Khomyakov

Dissertations (1934 -)

S-Nitrosation of cysteine (Cys) residues, a covalent modification of its S atom by NO group, is a major post-translational modification of proteins. Despite the importance of S-nitrosoproteins in numerous physiological processes, lability of the S-nitrosothiol (-SNO) group hinders the research progress. In this work, computational chemistry methods were applied to S-nitrosated cysteine (CysNO) models to gain a deeper insight into its structure and properties. First, we obtained the most accurate at the moment computational estimation of the molecular structure and properties of CH3SNO model molecule using Feller-Peterson-Dixon (FPD) ab initio protocol. The S–N bond length in cis- CH3SNO is calculated …

Computational Modeling Of S-Thiolation Reaction: Toward Discovering The Enzymatic Mechanisms Of Endogenous Hno Formation, Elena Ivanova

Dissertations (1934 -)

S-nitrosothiols (RSNOs) have long been proposed as potential sources of the elusive endogenous nitroxyl (HNO) via S-thiolation reaction with thiols. It is however not clear how S-thiolation can compete with the trans-S-nitrosation pathway commonly observed in vitro. Based on the insights into the highly unusual, antagonistic chemical nature of RSNO molecules, we hypothesize that, while difficult in vitro, S-thiolation could easily lend itself to enzymatic catalysis. To explore this possibility, we adopted a bottom-up computational approach that aims to identify possible catalytic mechanisms able to steer the RSNO + thiol reaction toward HNO production. Inspired by recent discovery of small …

Reactivity Of Ketyl And Acetyl Radicals From Direct Solar Actinic Photolysis Of Aqueous Pyruvic Acid, Alexis J. Eugene, Marcelo I. Guzman

Chemistry Faculty Publications

The variable composition of secondary organic aerosols (SOA) contributes to the large uncertainty for predicting radiative forcing. A better understanding of the reaction mechanisms leading to aerosol formation such as for the photochemical reaction of aqueous pyruvic acid (PA) at λ ≥ 305 nm can contribute to constrain these uncertainties. Herein, the photochemistry of aqueous PA (5-300 mM) continuously sparged with air is re-examined in the laboratory under comparable irradiance at 38° N at noon on a summer day. Several analytical methods are employed to monitor the time series of the reaction, including (1) the derivatization of carbonyl (C═O) functional …

Performance Of Piperidine Ionic Liquid Based Mixed Electrolyte In Li/Licoo2 Cell, Hu Cheng, Xiao-Yan Nie, Ye-Dan Shen

Journal of Electrochemistry

The N-methyl-N-ethyl (propyl, butyl) piperidinium bis (trifluo romethanesulfonyl) imide (PP12(3,4)TFSI) ionic liquids were prepared, and their influences on the performances of Li/LiCoO₂ cells were investigated. The electrochemical performance and thermostability of ionic liquids based mixed electrolytes were characterized by electrochemical methods and thermogravimetric analysis. The results showed that the piperidine ionic liquids could improve the thermostability of organic electrolyte, and the size of their side chain had played an important role on the electrochemical performance of Li/LiCoO₂ cell. The Li/LiCoO₂ cell used the electrolyte mixed with PP13TFSI exhibited the best electrochemical performance among the three ionic liquids. …

The Problem Of The Anode Electrolyte In H-Type Electrolytic Cell For Electrochemical Reduction Of Carbon Dioxide, Rui Zhang, Wei-Xin Lv, Li-Xu Lei

Journal of Electrochemistry

Electrochemical reduction of carbon dioxide (CO₂) was studied in the H-type electrolytic cell. It was found that the voltage between the cathode and the anode would increase during the long time electrolysis process, for this reason the electrolytic process would be unsustainable. After the experimental investigations carried out by constant potential electrolysis, constant current electrolysis, pH test and KHCO₃ concentration analysis of anode electrolyte before and after the electrolysis, the increase in cell voltage might be caused by the following process: H⁺, that was generated from the anodic oxygen evolution reaction, reacted with HCO_{3 …}

Effects Of Flame Retardant On The Rate Capability And Safety Performances Of The Soft-Package 5ah Lithium Ion Battery, Yan-Zhuo Lv, Xiao-He Wang, Yi-Ming Qin, Zhen-Bo Wang, Ke Ke

Journal of Electrochemistry

The 5 Ah soft packed lithium ion batteries with LiNi _0.4Co_0.2Mn_0.4 O₂ as the positive electrode material and the organic electrolytes with different amounts of fire retardants as the electrolyte solution were prepared. The effects of the fire retardant amount (5 %,10 %,20 %) of the fire retardants on the rate performances, short-circuit characteristics and overcharged behaviors of the 5 Ah soft packed lithium ion battery were investigated by electrochemical methods. The results indicated that the best rate performances were obtained by adding 5 vol.% of the fire retardants in the electrolyte solution when the …

Application Of Composite Ionic Liquid In Electro-Oxidation Activation Of A C-H Bond, Zi-Ying Chen, Qian-Qian Wu, Jian-Qing Zhang, Ying-Hong Zhu, Chun-An Ma

Journal of Electrochemistry

In this paper, the ionic liquid/carbon nanotube composite material was prepared through modifying the ionic liquid 1-ethyl-3-methylimidazolium acetate to multi-walled carbon nanotubes. The electro-oxidation properties of p-methoxy toluene (p-MT) were studied using the composite as an electrolyte. The effects of scanning speed, temperature and substrate concentration were studied by cyclic voltammetry and chronoamperometry. The electrochemical kinetics of p-MT in this system was also studied. The results showed that the electrochemical oxidation of p-MT in the composite electrolyte solution was irreversible. The process was mainly controlled by diffusion, and the diffusion coefficient (D) was 7.69×10-10 cm²·s^-1. Increasing …

Electrochemical Nucleation Of Invar Alloy On Glassy Carbon Electrode, Xian-Jie Huang, Hui Yan, Shuai-Shuai Huang, Fang-Zu Yang, Zhong-Qun Tian, Shao-Min Zhou

Journal of Electrochemistry

The linear sweep voltammetry, cyclic voltammetry and potential step methods were used to study the electrodeposition mechanism of Invar nickel-iron alloy (the mass fraction of nickel was 32~36%) on glassy carbon electrode surface in the weak acidic bath. The results demonstrate that the electrodeposition is was a diffusion controlled irreversible electrode process in this system. The Scharifker-Hill (SH) theory theoritic model (SH) were was used employed to fitting the experimental data and the result shows that the codeposition of Invar alloy on glassy carbon electrode surface conformed to the diffusion controlled three-dimensional instantaneous nucleation mechanism. The kinetic parameters were obtained …

Electrochemical Synthesis Of Porous Polyaniline Electrodes Using Hkust-1 As A Template And Their Electrochemical Supercapacitor Property, Qiong Luan, Chun-Feng Xue, Hong-Ye Zhu, Fu-Juan Yang, Xu-Li Ma, Xiao-Gang Hao

Journal of Electrochemistry

Excellent electrode plays vital important role in the performance of supercapacitors. Polyaniline (PANI) with good conductivity is often used to prepare electrode. However, its available surface is limited and results in a poor supercapacitance in many cases. It is desirable to fabricate an electrode containing electroactive PANI with high surface area deriving from its porous structure. Here, the metal-organic framework (MOF) material with high surface area was selected as a hard template for synthesizing porous PANI. Microporous PANI composite electrodes (Micro-PANI/CC) were fabricated by depositing aniline on to carbon cloth (CC) pre-coated with MOF material of HKUST-1 using a unipolar …

Sn-Doped Α-Fe2O3 Photocatalyst Containing Oxygen Vacancy For Water-Splitting, Zu-Hua Wang, Dong-Fang Niu, Hui-Cheng Li, Rong-Bin Du, Heng Xu, Xin-Sheng Zhang

Journal of Electrochemistry

The α-Fe₂O₃ nanoparticles containing oxygen vacancies were synthesized in atmospheric N₂ by dip-dropping method without a high vacuum employed before annealing. The influences of annealing atmosphere and Sn-doping on the photocatalytic performance of α-Fe₂O₃ nanoparticles were studied by annealing the photocatalyst in N₂ or air and adding SnCl₄ to the precursor directly. The results showed that the current density of Sn-doping α-Fe₂O₃ annealed in N₂ at 550 °C and 1.23 V (vs. RHE) was 35 times greater than that of pristine α-Fe₂O₃ annealed in …

Preparation And Electrochemical Properties Of Attapulgite-Supported Nitrogen-Doped Carbon@Nico2O4 Composites For Supercapacitors, Hui Wan, Zong-Rong Ying, Xin-Dong Liu, Jian-Jian Lu, Wen-Wen Zhang

Journal of Electrochemistry

In this work, the attapulgite-supported nitrogen-doped carbon (ANC) was prepared by in-situ chemically polymerizing polyaniline coating upon attapulgite, followed by high temperature heat treatment, and then NiCo₂O₄was reacted onto the surface of ANC by a combination of hydrothermal reaction and calcination to synthesize ANC@NiCo₂O₄ composites. The chemical composition and morphology of the samples were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and N₂ adsorption/desorption. The electrochemical properties were evaluated by means of constant current charge discharge (GCD) and cyclic voltammetry (CV). …

Preparations Of Mno2 Reference Electrodes For Corrosion Monitoring Of Reinforced Concrete, Li Yang, Bing Xu, Hai Wang, Ze-Hua Dong

Journal of Electrochemistry

In this work, the solid reference electrode was assemblied by using the electrochemically synthesized manganese dioxide (MnO₂) (EMD) powder, gel electrolyte and thin mortar layer for the durability evaluation of concrete. The EMD reference electrode exhibited higher potential stability (< 10 mV drift) than the chemically synthesied MnO₂ (CMD) based on half year potential tests in the saturated Ca(OH)₂ solution and hardened mortar. In addition, the EMD electrode was almost insensitive to the presences of chloride ion and corrosion inhibitor. Electrochemical impedance and polarization curves indicate that the EMD electrode had lower charge transfer resistance,higher exchange current density and lower temperature coefficient than the …

Aligning Electronic Energy Levels On The Anatase Tio2(101) Surface, Jun-Jie Zhao, Jun Cheng

Journal of Electrochemistry

As one of the most commonly-used materials for photocatalysis and solar energy conversion, titanium dioxide (TiO₂) has been extensively studied for more than 40 years. Its photoelectrochemical activity crucially depends on the band positions at the interface. In this work, the valence band maximum (VBM) and conduction band minimum (CBM) of a model TiO₂ surface are computed using the standard work function method at the level of Perdew-Burke-Ernzerhof (PBE) density functional, which are then converted to the scale of the standard hydrogen electrode (SHE) by subtracting the absolute SHE potential. Comparing with the rutile TiO₂(110) …

Effect Of Pressure On Ion Selectivity In Biomimetic Nanopores With Ph-Tunable Polyelectrolyte Brushes, Hui-Xia Shan, Zhen-Ping Zeng, Li-Xian Ye, Feng Shu

Journal of Electrochemistry

Biomimetic ionic channels of synthetic nanopores functionalized with pH-tunable polyelectrolyte (PE) brushes have significant application potentials for active transport control of ions, fluids, and bioparticles on the nanoscale. Ion selectivity is an important phenomenon of ion transport in nanofluidic devices, which has great theoretical significance and practical values. We propose a pressure control scheme to control the ion selectivity in biomimetic nano-systems with pH-tunable PE brushes. Effects of the solution properties (i.e., pH and background salt concentration), the applied voltage and pressure on ion selectivity are comprehensively investigated. The results show that ion selectivity is sensitive to pressure. Unlike the …

An Investigation In The Performance Of Lithium Sulfur Battery With A Tic Coated Separator, Jian-Hua Fang, Yong Cao, Mao-Ping Yang, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

To improve the specific capacity and cycle stability of lithium-sulfur (Li-S) battery, a TiC/Celgard coating separator was developed and its performance in Li-S battery was investigated. The electrochemical test results confirmed that the TiC coating layer could significantly increase the capacity and cycle stability. At a high rate of 2C, it still delivered the capacity of 650 mAh·g^-1. At 0.5C, the specific capacity was maintained at 841.3 mAh·g^-1 after 100 cycles.

Direct Electrochemistry Of Glucose Oxidase Based On Ws2 Quantum Dots And Its Biosensing Application, Chen-Lu Li, Hua-Ping Peng, Zhong-Nan Huang, Yi-Lun Sheng, Pei-Wen Wu, Xin-Hua Lin

Journal of Electrochemistry

In this study, a novel electrochemical glucose biosensor has been developed by immobilizing glucose oxidase (GOx) on tungsten disulfide quantum dots (WS₂ QDs) on the surface of glassy carbon electrode (GCE). Transmission electron microscopy, UV-vis spectroscopy and cyclic voltammetry were employed to characterize the morphology, structure, and electrochemical behaviors of the as-prepared WS₂ QDs and the biofilm modified electrode. The results suggested that the WS₂ QDs could accelerate the electron transfer between the electrode and the immobilized enzyme, which enabled the direct electrochemistry of GOx without any electron mediator. Besides, the immobilized GOx in WS₂ QDsfilm …