Other Civil and Environmental Engineering Commons^™

Sensor System, Implantable Sensor And Method For Remote Sensing Of A Stimulus In Vivo, Eric H. Ledet, Rebecca A. Wachs, Keegan Paul Cole, David Fiorella

Department of Agricultural and Biological Systems Engineering: Faculty Publications

A sensor system for sensing a stimulus in vivo includes an implantable sensor. The sensor comprises a passive resonator circuit having a resonant frequency and including at least a pair of generally parallel spirally wound unconnected conductive coils sandwiching a layer of solid dielectric material that manifest a change in property affecting the resonant frequency in response to application of the stimulus to the layer. A resonant frequency of the sensor is modulated by altering the spacing or gap between the coils or altering the overlapping area of the coils. The sensor is energized through application of radio frequency energy …

A Time-Series Forecasting Model For Windhoek Rainfall, Namibia, Godfrey T. Pazvakawambwa

Andrews Research Conference

The objective of the study was to use time series forecasting techniques to model Windhoek rainfall based on secondary monthly data from 1891 to 2011. Descriptive summary statistics in the form of measures of centrality and dispersion, time series plots, and autocorrelation functions were generated using R time series statistical software. The Box Jenkin’s ARIMA modelling procedure (model identification, model estimation, model validation) was used to determine the best models for the data. Model diagnostics based on residual analysis were performed to assess the adequacy of the identified models. The final model was then used to forecast monthly rainfall for …

Supraspinatus Tendon Micromorphology In Individuals With Subacromial Pain Syndrome, Federico Pozzi, Amee L. Seitz, Hillary A. Plummer, Kira Chow, Gregory R. Bashford, Lori A. Michener

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Study Design: Cross-sectional cohort. Introduction: Tendon collagen organization can be estimated by peak spatial frequency radius (PSFR) on ultrasound images. Characterizing PSFR can define the contribution of collagen disruption to shoulder symptoms.

Purpose of the Study: The purpose of this was to characterize the (1) supraspinatus tendon PSFR in participants with sub acromial pain syndrome (SPS) and healthy controls; (2) PSFR between participants grouped on a tendon visual quality score; and (3) relationship between PSFR with patient-reported pain, function, and shoulder strength.

Methods: Participants with SPS (n ¼ 20) and age, sex, and arm-dominance matched healthy controls (n ¼ 20) …

Fluid Isolator, Purdue Ect Team

ECT Fact Sheets Archive

The reliability of concrete infrastructure is vital to ensuring daily life, as well as commerce, can progress without interruption. From the pavement of interstate highways to the driveways and sidewalks in a local neighborhood, concrete is expensive to install and often even more expensive, and intrusive, when it needs to be replaced. Unfortunately, to maintain functionality in winter climates concrete is heavily exposed to deicing salts. This not only affects the roads, driveways, and sidewalks where salt is applied directly, but many other areas such as parking and residential garages where vehicles (and people) will track salt along with water …

Netpoint®, Purdue Ect Team

ECT Fact Sheets Archive

The vast majority of construction scheduling software uses a combination of spreadsheets and Gantt charts for developing and depicting Critical Path Method (CPM) schedules. While this paradigm works for the expert scheduler, it is not conducive to collaboration, and it is prohibitively difficult for non-scheduling experts to understand.

NetPoint® provides a dynamic, visual interface conducive to touch and gestural input. Activities are drawn directly on a time-scale and may be placed on the same row or arranged automatically using codes or the WBS. Such control of the presentation makes it easier to communicate the plan to any type of audience. …

Method For The Production Of Substituted Polysaccharides Via Reactive Extrusion, Milford Hanna, Pratik Bhandari

Department of Agricultural and Biological Systems Engineering: Faculty Publications

A reactive extrusion process for the production of substituted polysaccharides, in particular, cellulose acetate, starch acetate, carboxymethyl cellulose, and carboxymethyl starch.

The present application claims the benefit of PCT/ US20111059785 filed on Nov. 8, 2011, which claimed the benefit of U.S. provisional application 611411,521, filed on Nov. 9, 2010, U.S. provisional application 611411,992, filed on Nov. 10, 2010, and U.S. provisional application 611472, 748, filed on Apr. 7, 2011, each of which is which is incorporated herein by reference in its entirety.

The production of substituted polysaccharides such as starch and cellulose acetates and carboxymethylated starches and celluloses have typically …

Induced Earthquakes And Public Safety, Lyndsey L. Dickson

Civil Engineering Undergraduate Honors Theses

Like the number of earthquakes felt in Oklahoma, the number of media reports regarding large-magnitude earthquakes in Oklahoma has increased in recent years. News headlines that mention property damage and question who is responsible have sparked heated debated. In this document, a discussion is presented over the responsibility of engineers for the public’s safety in relation to earthquakes. Input from various groups is discussed, the action taken in Oklahoma is outlined, and ethical obligations presented by the American Society of Civil Engineers are considered. The United States Geological Survey (USGS) has reported a major grievance against building-code committees, but many …

Smartvid.Io, Purdue Ect Team

ECT Fact Sheets Archive

The collection, organization, and retrieval of industrial media is a pervasive challenge that is especially glaring for companies in the AEC industry. Construction projects often generate large volumes of pictures & videos from the field for tracking progress and communicating between engineers, contractors, and subcontractors. It is not uncommon for field personnel to capture hundreds of photos per week on any given jobsite.

Smartvid.io is a cloud-based software solution designed for the specific needs of industrial media. The application’s internal deep-learning engines, collectively nicknamed VINNIE (for ‘Very Intelligent Neural Network for Insight and Evaluation’), use speech and image recognition to …

Hillman Composite Beam (Hcb®), Purdue Ect Team

ECT Fact Sheets Archive

The Hillman-Composite Beam (HCB®), is an innovative structural member for use in highway and railroad bridges as well as marine facilities. The HCB is essentially a lightweight reinforced concrete beam strengthened and protected by a corrosion-resistant and resilient Fiberglass Reinforced Polymer (FRP) shell.

The beam is comprised of three main components, a concrete arch (compression reinforcement), an FRP bottom flange encapsulating steel strands tying the ends of the arch together (tension reinforcement) and the FRP shell. Galvanized Rebar “shear connectors” are used to make the beam composite with the concrete deck in the same manner as pre-stressed concrete beams.

The …

Industrial-Grade Monitoring Solution: Hoistcam, Purdue Ect Team

ECT Fact Sheets Archive

Safety and productivity are top priorities for contractors and industrial operations. Improving either makes a company more profitable and competitive. Technology advancements that can do both are important for every company to consider. HoistCam^TM industrial-grade video monitoring solutions can improve employees’ productivity and workplace safety in the construction industries. HoistCam also improves efficiency of operations and reduces job site accidents resulting in substantial cost savings to a contractor.

HoistCam™ is an integrated, wireless video system. The use of HoistCam eliminates blind lifts, blind spots and can share the live video with anyone, anywhere with solid security and easy control. …

Cwr 4812 Water Resources Design, Sarina Ergas

Service-Learning Syllabi

No abstract provided.

Purdue Ect Report - Fourth Quarter 2016, Purdue Ect Team

ECT Fact Sheets Archive

Fourth Quarter 2016

This is a quarterly report from the Purdue ECT.

Bicp Global Bim Study - Lessons For Ireland’S Bim Programme, Barry Mcauley, Alan Hore, Roger West

Reports

The Construction IT Alliance (CitA) has been promoting the benefits of digitisation in the construction and engineering industry in Ireland since its formation back in 2002. Whilst the Alliance has always strived to ensure that its members are exposed to a wide spectrum of contemporary digital tools and processes, the concept of Building Information Modelling (BIM) has dominated the focus of its activities over the past five years.

BIM can be described as a digital tool that facilitates everybody to better understand a building or structure through the use of a digital model which draws on a range of data …

Road Zipper™, Purdue Ect Team

ECT Fact Sheets Archive

Construction work zones are growing in number around the world. The natural aging of existing roadway infrastructure ensures that more and more maintenance and rehabilitation will be required. Work zones, by their very definition, create two major problems that must be addressed in some way: safety and mobility. In the United States, highway work zones are responsible for almost 25% of all non-recurring congestion and 10% of overall congestion. Vehicle accidents are more common in work zones, and traffic congestion through work zones on urban arterials and freeways is often considered to be “unavoidable." To address these issues, ROAD ZIPPER™ …

The Effect Of Biocomposite Material In A Composite Structure Under Compression Loading, Benjamin Andrew Sweeney

Master's Theses

While composite structures exhibit exceptional strength and weight saving possibilities for engineering applications, sometimes their overall cost and/or material performance can limit their usage when compared to conventional structural materials. Meanwhile ‘biocomposites’, composite structures consisting of natural fibers (i.e. bamboo fibers), display higher cost efficiency and unique structural benefits such as ‘sustainability’. This analysis will determine if the integration of these two different types of composites are beneficial to the overall structure. Specifically, the structure will consist of a one internal bamboo veneer biocomposite ply; and two external carbon fiber weave composite plies surrounding the bamboo biocomposite. To acquire results …

Center Pivot Irrigation Handbook (Ec3017), Derrel Martin, William Kranz, Tyler Smith, Suat Irmak, Charles Burr, Ron Yoder

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Center pivot irrigation has been the most rapidly expanding form of irrigation in the Central Great Plains and across the United States. The amount of land irrigated with sprinkler, gravity and drip or trickle systems was determined for all states in the USA in the Farm and Ranch Irrigation Survey1 by the USDA in 2012. Results of the survey for the Great Plains States shows that approximately 85% of the land in Nebraska is irrigated with center pivots and that very little land was irrigated with drip systems in 2012 (Figure 1). The percentage of land irrigated with sprinklers in …

Tissue Decellularization Methods, Christine E. Schmidt, Rebecca A. Wachs, Robert Chase Cornelison

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Provided herein are methods of producing an acellular tissue product wherein the method can include the step of inducing apoptosis and washing the tissue after induction of apoptosis with a tonic solution. Also provided herein are acellular tissue products produced by the methods provided herein and methods of administering the acellular tissue products to a subject in need thereof.

The Irreversible Momentum Of Clean Energy, Barack Obama

United States Department of Energy: Publications

The release of carbon dioxide (CO₂) and other greenhouse gases (GHGs) due to human activity is increasing global average surface air temperatures, disrupting weather patterns, and acidifying the ocean. Left unchecked, the continued growth of GHG emissions could cause global average temperatures to increase by another 4°C or more by 2100 and by 1.5 to 2 times as much in many midcontinent and far northern locations. Although our understanding of the impacts of climate change is increasingly and disturbingly clear, there is still debate about the proper course for U.S. policy—a debate that is very much on display …

Electrochemical And Electroflotation Processes For Milk Waste Water Treatment, Alahmand Suleiman Mohammed

ETD Archive

The dairy industry generates abundant milk waste waters characterized by high biochemical oxygen demand (BOD) and chemical oxygen demand (COD) concentrations that can be very harmful to the environment, if left untreated. Electrocoagulation (EC) has been in use for waste water treatment. The treatment application uses aluminum electrodes and iron or the combined hybrid Al/Fe electrodes. Milk waste water contains high concentration organic pollutants and the main constituents of those organics are carbohydrates, proteins and fats, originating from the milk. The process of separating the flocculated sludge from waste water that has been treated using the electrocoagulation process can be …

Correction: Messer, T.L.; Burchell, M.R.; Birgand, F. Comparison Of Four Nitrate Removal Kinetic Models In Two Distinct Wetland Restoration Mesocosm Systems. Water 2017, 9, 517, Tiffany L. Messer, Michael R. Burchell, François Birgand

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The authors wish to make the following corrections to this paper [1]:

(1): The author name “François Bírgand” should be François Birgand.

(2): Reference 38 should be the following:

Birgand, F.; Aveni-Deforge, K.; Smith, B.; Maxwell, B.M.; Horstman, M.; Gerling, A.B.; Carey, C.C. First report of a novel multiplexer pumping system coupled to a water quality probe to collect high temporal frequency in situ water chemistry measurements at multiple sites. Limnol. Oceanogr. Methods 2016, 14, 767–783, doi:10.1002/lom3.10122.

(3): Reference 49 should be the following:

Christensen, P.B.; Nielsen, L.P.; Sørensen, J.; Revsbech, N.P. Denitrification in Nitrate-Rich Streams: Diurnal and Seasonal Variation …

Comparison Of Four Nitrate Removal Kinetic Models In Two Distinct Wetland Restoration Mesocosm Systems, Tiffany L. Messer, Michael R. Burchell, François Birgand

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The objective of the study was to determine the kinetic model that best fit observed nitrate removal rates at the mesocosm scale in order to determine ideal loading rates for two future wetland restorations slated to receive pulse flow agricultural drainage water. Four nitrate removal models were investigated: zero order, first order decay, efficiency loss, and Monod. Wetland mesocosms were constructed using the primary soil type (in triplicate) at each of the future wetland restoration sites. Eighteen mesocosm experiments were conducted over two years across seasons. Simulated drainage water was loaded into wetlands as batches, with target nitrate-N levels typically …

Development And Validation Of A Tractor Drawbar Force Measurement And Data Acquisition System (Daq), James Roeber, Santosh Pitla, Roger M. Hoy, Joe D. Luck, Michael F. Kocher

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Matching agricultural tractors to implements towed by the drawbar is one of the important aspects of machinery management for ensuring optimum performance and fuel cost savings. A field deployable tractor draft force measurement and data acquisition system was developed and evaluated as part of this research project. A drawbar instrumented to measure draft force in field operating conditions was developed and statically calibrated. The drawbar was calibrated by applying loads from 4.45 to 134 kN using a hydraulic cylinder connected to a 444.8 kN load cell. Testing was conducted with the drawbar installed on a tractor on a concrete track. …

Green And Sustainable Technology For High-Efficiency And Low- Damage Manipulation Of Densely Crosslinked Proteins, Helan Xu, Kaili Song, Bingnan Mu, Yiqi Yang

Department of Agricultural and Biological Systems Engineering: Faculty Publications

A two-step technology using nontoxic and ecofriendly chemicals is developed for the durable setting of densely/highly crosslinked proteins, such as wool and hair. Currently, most technologies for morphological modification are effective only for materials from non-highly-crosslinked proteins and cellulose. Before their morphological change, only water is needed to interrupt hydrogen bonds and ionic linkages, which stabilize the relative positions of molecules in non-highlycrosslinked proteins and cellulose. However, highly crosslinked proteins contain disulfide crosslinks, which are insusceptible to water. Thus, the controlled cleavage of disulfide bonds is required for creating new morphologies of highly crosslinked protein materials, such as hair and …

Differences In Soil Biological Activity By Terrain Types At The Sub-Field Scale In Central Iowa Us, Amy L. Kaleita, Linda R. Schott, Sarah K. Hargreaves, Kirsten S. Hofmockel

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Soil microbial communities are structured by biogeochemical processes that occur at many different spatial scales, which makes soil sampling difficult. Because soil microbial communities are important in nutrient cycling and soil fertility, it is important to understand how microbial communities function within the heterogeneous soil landscape. In this study, a self-organizing map was used to determine whether landscape data can be used to characterize the distribution of microbial biomass and activity in order to provide an improved understanding of soil microbial community function. Points within a row crop field in southcentral Iowa were clustered via a self-organizing map using six …

The Assessment Of Water Resources In Ungauged Catchments In Rwanda, O. P. Abimbola, J. Wenninger, R. Venneker, Aaron R. Mittelstet

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Study region: Rwanda is a landlocked country in Africa with precipitation ranging from 800 mm yr−1 in the east to 1500 mm yr−1 in high-altitude regions in the north and west. Study focus: Streamflow estimation is an important task that is required in water resource assessments due to its importance in planning, decision-making and economic development. In this study, streamflow characteristics of ungauged catchments in Rwanda were calculated using a regionalization approach based on climate similarity and stepwise multiple-regression analysis. One climatic homogeneous region was identified and datasets of nine gauged stations and general available catchment characteristics were …

A Geospatial Variable Rate Irrigation Control Scenario Evaluation Methodology Based On Mining Root Zone Available Water Capacity, K. A. Miller, Joe Luck, Derek M. Heeren, T. Lo, Derrel Martin, J. B. Barker

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Increasing concern for sustainable water use has the agriculture industry working toward higher efficiency in use of irrigation water. Recent advancements have improved the capabilities of center pivot irrigation systems to vary water application depths across the field, a technology known as variable rate irrigation (VRI). The goal of this study was to provide a geospatial method for potential VRI technology adopters to evaluate control scenarios and potential water savings using freely available datasets. Root zone available water capacity (R) was estimated spatially across two case study fields using the Natural Resources Conservation Service Gridded Soil Survey Geographic Database. The …

The Effect Of Single-Handed Lifting Tasks On The Activation Of The Neck-Shoulder Shared Musculature, Mohamed R. Amar, David Cochran, Jeffrey Woldstad

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The use of the hand in lifting has been linked to occupational injuries of the neck and shoulder. This research is aimed at examining the effect of work-related factors on the major neck-shoulder shared musculature activity on both sides of the cervical spine for a right-handed lifting task. Subjects lifted different weights from 20 different locations produced by the interaction of varying heights, reach distance, and angles simulating the work done by assembly line workers. All lifting tasks were done by the right hand. Bilateral electromyography data of major shared musculature (upper trapezius, sternocleidomastoid, and levator scapula) were collected using …

Regulation-Structured Dynamic Metabolic Model Provides A Potential Mechanism For Delayed Enzyme Response In Denitrification Process, Hyun-Seob Song, Dennis G. Thomas, James C. Stegen, Minjing Li, Chongxuan Liu, Xuehang Song, Xingyuan Chen, Jim K. Fredrickson, John M. Zachara, Timothy D. Scheibe

Department of Agricultural and Biological Systems Engineering: Faculty Publications

In a recent study of denitrification dynamics in hyporheic zone sediments, we observed a significant time lag (up to several days) in enzymatic response to the changes in substrate concentration. To explore an underlying mechanism and understand the interactive dynamics between enzymes and nutrients, we developed a trait-based model that associates a community’s traits with functional enzymes, instead of typically used species guilds (or functional guilds). This enzyme-based formulation allows to collectively describe biogeochemical functions of microbial communities without directly parameterizing the dynamics of species guilds, therefore being scalable to complex communities. As a key component of modeling, we accounted …

Trend Analysis In Rainfall, Reference Evapotranspiration And Aridity Index In Southern Senegal: Adaptation To The Vulnerability Of Rainfed Rice Cultivation To Climate Change, Komlan Koudahe, Koffi Djaman, Ansoumana Bodian, Suat Irkmak, Mamadou Sall, Lamine Diop, Alpha B. Balde, Daran Rudnick

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Rainfall and evapotranspiration are two vital elements for food production under rainfed agriculture. This study aims at investigating the combined changes in these variables in the form of aridly index in the southern Senegal. The temporal trends in annual and monthly (from May to October) aridity index, rainfall and evapotranspiration are examined and adaptation strategies to the vulnerability of rainfed rice cultivation to the changes are developed. The results show a significant decreasing trend in annual rainfall at all study locations for the period 1922-2015. When analyzing the trends in sub-periods, there are two clear patterns in the annual rainfall …

Performance Of Twelve Mass Transfer Based Reference Evapotranspiration Models Under Humid Climate, Koffi Djaman, Komlan Koudahe, Mamadou Sall, Isa Kabenge, Daran Rudnick, Suat Irkmak

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Reference evapotranspiration is very important parameter in the hydrological, agricultural and environmental studies and is accurately estimated by the FAO Penman-Monteith equation (FAO-PM) under different climatic conditions. However, due to data requirement of the FAO-PM equation, there is a need to investigate the applicability of alternative ETo equations under limited data. The objectives of this study were to evaluate twelve mass transfer based reference evapotranspiration equations and determine the impact of ETo equation on long term water management sustainability in Tanzania and Kenya. The results showed that the Albrecht, Brockamp-Wenner, Dalto, Meyer, Rohwer and Oudin ETo equations systematically overestimated the …