Other Civil and Environmental Engineering Commons^™

Lidar Assessment To Monitor Bridge Response Under Live And Dead Loads, Daniel Watson

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Understanding how a bridge structure responds to various loads in a time and resource-efficient approach is vital in characterizing bridge health. Bridge health monitoring is an evaluation of the structural condition and performance, which optimizes limited transportation budgets by prioritizing the bridges that are in the most need for retrofit or replacement. Identifying and remedying issues will mitigate long-term problems and ensure that the bridge remains open to service for all legal loads. In contrast, health monitoring and load rating will determine if a bridge can only carry traffic up to a certain weight or speed, requiring a bridge load …

Static Analysis Of Structural Members, Amani Calderon, Alexis Villalona, Farhad Alinaghizadeh

Publications and Research

This research is devoted to statics analysis of structural members under mechanical loads. Static analysis of beams under uniform transverse mechanical loads is presented. The beams are supported by simply supported boundary condition at both sides. The equilibrium equation of the beams is obtained and solved using analytical method and numerical method. The numerical method employed in this work is generalized differential quadrature (GDQ) method. The type of differential quadrature method used for numerical solution is the polynomial-based GDQ method. The differential equation is discretized into algebraic equations based on the GDQ technique. The algebraic equations are then solved to …

Multiscale Modeling Of Fracture In Quasi-Brittle Materials Using Bifurcation Analysis And Element Elimination Method, Keyvan Zare Rami

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Analyzing the fracture of heterogeneous materials is a complex problem, due to the fact that the mechanical behavior of a heterogeneous material is strongly dependent on a variety of factors, such as its microstructure, the properties of each constituent, and interactions between them. Therefore, these factors must be effectively taken into account for accurate analysis, for which the multiscale method has been widely used. In this scheme, the computational homogenization method is used to obtain the effective macroscopic properties of a heterogeneous material based on the response of a Representative Volume Element (RVE). The growth of damage in an RVE …

A Comparison Of The Army Corps Of Engineers Hydrologic Modeling System And Autodesk Storm And Sanitary Analysis For Hydraulic And Hydrologic Analysis And Design, Foster Josef Heifetz Campbell

Master's Theses

Hydrological and hydraulic effects of urban development is one of the key issues of study for improved water management. The addition of impervious surfaces to once pervious land and re-routing open channels and flow paths can cause flooding or declining water levels within a watershed. Many studies of these issues have found that there can be multiple factors causing hydrological and hydraulic impacts, and it can be hard to analyze and develop effective solutions without appropriate drainage software packages. However, there are multiple software packages available for use, and determining the correct one to use for a specific challenge can …

Development Of A Mix Design Adjustment Method For Fiber Reinforced Concrete And Super High Performance Concrete Based On Excess Paste, Joe Malloy

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The main objective of this study was to develop a mix design adjustment method for Fiber Reinforced Concrete (FRC) that would maintain appropriate workability while improving hardened concrete performance. A literature review was conducted to examine existing methods for adjusting mix designs to account for fiber introduction. It was found that while increasing fine aggregate and cement paste content can make up for lost workability with the addition of fibers, no rational mix design adjustment method is available. Reference mix designs from the Nevada Department of Transportation and the Nebraska Department of Transportation were used, and this study focused on …

Environmental Sustainability Assessment Of Small Nebraska Mechanical Water Resource Recovery Facilities: Impacts Of Construction And Operations, Sussan Moussavi

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Many small, rural communities struggle with aging or inadequate water resource recovery facilities (WRRFs), and face challenges in constructing and operating such systems. Although existing literature has provided insight into the environmental sustainability of large systems including both the construction and operational phases, these studies have not examined small systems in adequate depth or breadth. The environmental impacts associated with construction may be notable for small WRRFs since the initial construction can be a larger share of the total life cycle environmental impact.

The goal of this work is to provide the environmental sustainability profiles of 12 mechanical WRRFs in …

Comparative Assessment Of Downscaling Methods And Application Towards Analysis Of Climate Change Impact On Urban Regions, Markus Eichenbaum

Electronic Thesis and Dissertation Repository

Global climate models (GCM) are sophisticated numerical models used to make long term climate projections. However, the resolution of their output is too coarse for climate change related local impact studies on urban regional scales. Downscaling efforts are taken to address this and increase GCM projection resolution. Physical Scaling (SP) downscaling methodology attempts to incorporate the physical basis of dynamical downscaling efforts with the computational efficiency of statistical methods. In this study, North American Regional Reanalysis surface skin temperature and precipitation data for a 1°x1° region centered on Houston, TX are downscaled to a resolution of 500m via SP and …

An Open-Source Tool To Facilitate The Processing Of Grace Observations And Gldas Outputs: An Evaluation In Bangladesh, Adam J. Purdy, Cédric H. David, Md. Safat Sikder, John T. Reager, Hrishikesh A. Chandanpukar, Norman L. Jones, Mir A. Matin

Faculty Publications

Bangladesh lies at the intersection of the Ganges, Brahmaputra, and Meghna rivers with a combined average discharge of 38,000 m3s−1 ranking fourth globally. Despite the volume of water flowing through and seasonally inundating parts of the landscape, groundwater reliance is necessary to support an intensive agricultural industry. Here we use newly-developed open-source software to combine observations from the Gravity Recovery and Climate Experiment (GRACE) satellites with hydrologic estimates of land water storage from the Global Land Assimilation Data System (GLDAS) to isolate basin-scale groundwater anomalies in Northwest Bangladesh from 2002 to 2016. We place our estimates in the context of …

Hydrologic Modeling As A Service (Hmaas): A New Approach To Address Hydroinformatic Challenges In Developing Countries, Michael A. Souffront Alcantara, E. James Nelson, Kiran Shakya, Christopher Edwards, Wade Roberts, Corey Krewson, Daniel P. Ames, Norman L. Jones, Angelica Gutierrez

Faculty Publications

Hydrologic modeling can be used to aid in decision-making at the local scale. Developed countries usually have their own hydrologic models; however, developing countries often have limited hydrologic modeling capabilities due to factors such as the maintenance, computational costs, and technical capacity needed to run models. A global streamflow prediction system (GSPS) would help decrease vulnerabilities in developing countries and fill gaps in areas where no local models exist by providing extensive results that can be filtered for specific locations. However, large-scale forecasting systems come with their own challenges. These New hydroinformatic challenges can prevent these models from reaching their …

Enabling Stakeholder Decision-Making With Earth Observation And Modeling Data Using Tethys Platform, E. James Nelson, Sarva T. Pulla, Mir A. Matin, Kiran Shakya, Norm Jones, Daniel P. Ames, W. Lee Ellenburg, Kel N. Markert, Cédric H. David, Benjamin F. Zaitchik, Patrick Gatlin, Riley Hales

Faculty Publications

Tethys Platform is an open source framework for developing web-based applications for Earth Observation data. Our experience shows that Tethys significantly lowers the barrier for cloud-based app development, simplifies the process of accessing scalable distributed cloud computing resources and leverages additional software for data and computationally intensive modeling. The Tethys software development kit allows users to create web apps for visualizing, analyzing, and modeling Earth Observation data. Tethys platform provides a collaborative environment for scientists to develop and deploy several Earth Observation web applications across multiple Tethys portals. We work in partnership with leading regional organizations world-wide to help developing …

The Impact Of Hurricane Harvey On Pavement Structures In The South East Texas And South West Louisiana, Stefan Romanoschi

Data

Corresponding data set for Tran-SET Project No. 18PUTA02. Abstract of the final report is stated below for reference:

"This study developed a methodology to estimate the damage caused by flooding, such that caused by Hurricane Harvey, on a road or street network. The flooded street or pavement sections are identified using GIS flood maps with street GIS maps used for pavement management systems (PMS) by cities or state authorities. Then the damage caused by flooding directly through the increase moisture in foundation layers or indirectly due to the increase heavy traffic during the relief effort is estimated. An example Excel …

The Impact Of Hurricane Harvey On Pavement Structures In The South East Texas And South West Louisiana, Stefan Romanoschi

Publications

This study developed a methodology to estimate the damage caused by flooding, such that caused by Hurricane Harvey, on a road or street network. The flooded street or pavement sections are identified using GIS flood maps with street GIS maps used for pavement management systems (PMS) by cities or state authorities. Then the damage caused by flooding directly through the increase moisture in foundation layers or indirectly due to the increase heavy traffic during the relief effort is estimated. An example Excel macro was created to illustrate the estimation process. The methodology estimates the increase in rehabilitation costs since the …

Simulation Of The Impact Of Connected And Automated Vehicles At A Signalized Intersection, Hamad Bader Almobayedh, Deogratias Eustace, Philip Appiah-Kubi

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Intersections are locations with higher likelihood of crash occurences and sources of traffic congestion as they act as bottlenecks compared with other parts of the roadway networks. Consequently, connected and automated vehicles (CAVs) can help to improve the efficiency of the roadways by reducing traffic congestion and traffic delays. Since CAVs are expected to take control from drivers (human control) in making many important decisions, thus they are expected to minimize driver (human) errors in driving tasks. Therefore, CAVs potential benefits of eliminating driver error include an increase in safety (crash reduction), smooth vehicle flow to reduce emissions, and reduce …

Evaluation Of Internally Cured Bridge Deck Concrete With Standard And Optimized Aggregate Gradation, Arman Abdigaliyev

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Due to the relatively high cement content and low water-to-cement ratio (w/c) used, bridge deck concrete is prone to premature cracking. Internal curing has been found to greatly reduce the chance of premature cracking as well as concrete deterioration. This research developed internally cured bridge deck concrete based on a local mix design in Nebraska. Four different lightweight fine aggregate (LWFA) as internal curing agents were evaluated and their effects on fresh, mechanical, durability, and shrinkage properties of concrete were studied. The study focused on resolving two issues associated with fine aggregate replacement based on Bentz equation. To identify the …

Improving The Sustainability Of The Built Environment By Training Its Workforce In More Efficient And Greener Ways Of Designing And Constructing Through The Horizon2020 Bimcert Project, Barry Mcauley, Avril Behan

Conference papers

The construction industry consumes up to 50% of mineral resources excavated from nature, generates about 33% of CO2 present in the atmosphere and is responsible for 40% of total global energy through both construction and operation of buildings. The realisation that current pervasive construction practices now face globalization, sustainability, and environmental concerns, as well as ever-changing legislation requirements and new skills needed for the information age has resulted in technologies such as Building Information Modelling (BIM) becoming a key enabler in navigating these barriers. To assist in overcoming these barriers, a number of funding initiatives have been put in place …

Centres Of Excellence And Roadmaps For Digital Transition: Lessons For Ireland’S Construction Industry, Barry Mcauley, Alan Hore, Roger West

Conference papers

Like most sectors in today’s working world, construction businesses are challenged to work in an increasingly digitised world with sophisticated demands from intelligent clients. So much has been written about the inefficiencies of the construction industry, its fragmentation, lack of collaboration, low margins, adversarial pricing, poor productivity, financial fragility, lack of research and development, poor industry image and relatively weak use of digital solutions. The Irish government recognises the importance of digital innovation to address many of the challenges the construction industry faces. With recent high profile reports of escalating spend on signature public sector projects and weak productivity performance …

Bim In Ireland 2019: A Study Of Bim Maturity And Diffusion In Ireland, Barry Mcauley, Alan Hore, Roger West

Conference papers

In 2017, the BIM Innovation Capability Programme team applied five macro BIM maturity conceptual models to capture the capability of the Irish construction industry and assess its BIM maturity. The results found that while Ireland is mature for modelling processes, it is less developed with regards to collaboration processes and policies. Ireland also ranked poorly when it came to regulatory frameworks, measurements and benchmarks compared to a number of countries which also applied the same conceptual models. At the time, the findings highlighted that Ireland’s diffusion dynamic was middle out, meaning that larger organisations or industry associations were pushing the …

An Investigation Into Current Procurement Strategies That Promote Collaboration Through Early Contractor Involvement With Regards To Their Suitability For Irish Public Work Projects, Barry Mcauley, Frederic Lefebvre

Conference papers

Previous research has established that multi-disciplinary collaboration will benefit a construction project throughout its lifecycle. While Lean Construction, Building Information Modelling (BIM), and Integrated Project Delivery (IPD) can all be viewed as separate processes which add independent value to a project, they are more effective when used in partnership with each other. In order to ensure the high levels of collaboration expected for these processes to work in unison, the early involvement of the Contractor is paramount. Early contractor involvement within the design process can ensure a more focused integrated project team, improvement of both constructability and cost certainty, as …

From Roadmap To Implementation: Lessons For Ireland’S Digital Construction Programme, Barry Mcauley, Alan Hore, Roger West

Conference papers

As part of their Future of Construction initiative in 2018 the World Economic Forum published an action plan to accelerate Building Information Modelling adoption. The WEF report highlighted actions that companies, industry organisations and governments are advised to implement to accelerate BIM adoption and better capitalise on delivering better project outcomes. According the authors of the report BIM is seen as the centrepiece of the construction industry’s digital transformation, however they acknowledged that BIM adoption globally remain slow. Anecdotal experience would suggest that BIM usage in Ireland is also very low and that a similar initiative or an adaptation of …

Integrated Full-Scale Physical Experiments And Numerical Modeling Of The Performance And Rehabilitation Of Highway Embankments, Navid Jafari, Anand Puppala, Sayantan Chakroborty, Burak Boluk

Data

Corresponding data set for Tran-SET Project No. 18GTLSU06. Abstract of the final report is stated below for reference:

"The study aimed to fundamentally understand how soil strength and hydraulic properties are impacted by recurring cycles of wetting and drying induced by climate variability, with the practical implication of forecasting the stability of highway embankment slopes. The review of literature on the effects of long-term cyclic wetting-drying phases on hydro-mechanical properties of clayey soils suggests that only a few cycles of wetting and drying can impact the strength and hydraulic conductivity, where the latter can increase several orders of magnitude. Laboratory …

Evaluating How The Quality Of Pedestrian Infrastructure Affects The Choice To Walk, Gregory Rowangould, Alexis Corning-Padilla

Data

Corresponding data set for Tran-SET Project No. 18PPUNM02. Abstract of the final report is stated below for reference:

"While the benefits of walking are well understood, the physical design of sidewalks and their maintenance needs generally receive much less attention in both research and practice than the infrastructure used by other modes of transportation. As a result, we know comparatively little about how the design of sidewalks and quality of the overall pedestrian environment affect the decision to walk. In our study we conducted a household travel survey to collect data on walking frequency and attributes related to sidewalk quality …

Integrated Full-Scale Physical Experiments And Numerical Modeling Of The Performance And Rehabilitation Of Highway Embankments, Navid Jafari, Anand Puppala, Sayantan Chakraborty, Burak Boluk

Publications

The study aimed to fundamentally understand how soil strength and hydraulic properties are impacted by recurring cycles of wetting and drying induced by climate variability, with the practical implication of forecasting the stability of highway embankment slopes. The review of literature on the effects of long-term cyclic wetting-drying phases on hydro-mechanical properties of clayey soils suggests that only a few cycles of wetting and drying can impact the strength and hydraulic conductivity, where the latter can increase several orders of magnitude. Laboratory model-scale experiments of Louisiana and Texas soils are still ongoing and will relate the laboratory test results to …

Optimizing The Valorization Of Industrial By-Products For The Induction Healing Of Asphalt Mixtures, Amir Tabakovic, Marta Vila-Cortavitarte, Daniel Jato-Espino, Daniel Castro-Fresno

Articles

Self-healing within asphalt pavements is the process whereby road cracks can be repaired automatically when thermal and mechanical conditions are met. To accelerate and improve this healing process, metal particles are added to asphalt mixtures. However, thisapproach is costly both in economic and environmental terms due to the use of virgin metallic particles. So, even though the self-healing of asphalt mixtures has been widely addressed in experimental terms over the years, there is a lack of research aimed at modelling this phenomenon, especially with the purpose of optimizing the use of metal particles through the valorization of industrial by-products. As …

Effects Of Nutrient Level And Growth Rate On Mutation And Conjugation Processes That Confer Antibiotic Resistance To E. Coli, Mohammadreza Shafieifini

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Antibiotic resistance genes (ARGs) may enter surface water with the discharge of treated wastewater. Conjugation is a main mechanism for the horizontal gene transfer of ARGs from wastewater microbiome to the microbiome indigenous to surface water. However, little is known about how environmental factors affect the conjugation process of ARGs.

In this thesis, an extensive research related to spreading antibiotic resistance genes in the environment is reported. The project investigated how environmental parameters may affect the rate of dissemination of ARGs and in what extent the resistance level of the population is changed after mutation and conjugation event. The chemostat …

Developing Implementable Climatic Input Data And Moisture Boundary Conditions For Pavement Analysis And Design, Rifat Bulut, Amir Hossein Javid

Data

Corresponding data set for Tran-SET Project No. 18POKS03. Abstract of the final report is stated below for reference:

"The main objective of this study is to develop a practical and implementable numerical model for predicting the moisture (suction) regime within the pavement subgrade system. The research quality and uniformly-dispersed climate data over short distances from Oklahoma Mesonet and the Mitchell based moisture (suction) prediction methods establish the main background of the research study. The study involved numerical modeling and statistical analysis of climatic weather data. The proposed moisture variation model predicts the suction distribution throughout the soil subgrade by solving …

Uhpc Shear Keys In Concrete Bridge Superstructures, Craig Newtson, Brad Weldon, Elsy Flores, Jordan Varbel, William Toledo

Publications

This research investigated the use of locally produced ultra-high performance concrete (UHPC) as a grouting material to repair deteriorated shear keys. Shear keys are used in adjacent girder superstructures to produce monolithic behavior and load transfer across the structure. Shear key durability is a concern since shear key degradation can jeopardize the integrity of the structure. Transportation agencies have reported that 75% of distress in adjacent girder bridges is due to cracking and de-bonding along shear keys. Previous research has shown that locally produced UHPC has excellent mechanical and durability properties. UHPC has also been shown to have good bonding …

Assessing The Impacts Of Super Storm Flooding In The Transportation Infrastructure – Case Study: San Antonio, Texas, Marcio Giacomoni, Francisco Olivera, Cesar Do Lago

Publications

Flooding are likely to increase worldwide due to climate change. Large storms, referred here as superstorms, defined as events with return period equal or larger than 100 years, can lead to an increase of property damages and loss of life. The ability to predict and plan for the impacts of superstorms on transportation infrastructure is key to mitigate future damages and losses. This study analyzed 51 combinations of future projections for representative concentration pathways (RCP) 4.5 and 8.5 scenarios, which were used to calculate future 1st and 3rd quartiles, median, minimum and maximum intensity-duration-frequency curves (IDF). A HEC-HMS and GSSHA …

Numerical Simulation Of Diffuse Ultrasonic Waves In Concrete, Hossein Ariannejad

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Concrete can be subject to various type of damages. Some damages such as Alkali Silica Reaction (ASR) tend to start from the inside, where there is no easy way to identify or evaluate them in the early stage. The study of ultrasonic waves scatterings in non destructive testing (NDT) methods play a major role in identifying such damages. In an ultrasonic test, high frequency ultrasonic waves are used to interrogate the internal structure of concrete material, where the coarse aggregates and microcracks cause multiple scattering of ultrasonic waves. Experimental studies have demonstrated that diffuse ultrasonic waves scattered by boundaries, coarse …

Integrated Aeration For Enhanced Nitrogen Conversion And Removal And The Effect Of Sampling Frequency On Productivity Estimates In Algae-Based Wastewater Treatment Systems, Lauren Parker

Master's Theses

Raceway ponds can be used to cultivate microalgae for purposes such as wastewater treatment and feedstock for animal feeds and biofuels. Besides nitrogen assimilation in biomass, nitrification can be a wastewater treatment mechanism but one that is hindered by the low nighttime dissolved oxygen concentrations (DO) common in wastewater treatment raceways. The large diel difference in pond conditions and changing influent wastewater quality also raises the question of the optimal frequency and timing of grab sample collection, to obtain representative water quality data. Three sets of triplicate pilot raceways (1,000-L, 0.30-m deep, fed primary clarifier effluent) were operated at an …

Microbial Transport As Affected By Residue Cover And Manure Application Rate, Lisa M. Durso, John E. Gilley, Dave B. Marx, Chance A. Thayer, Brian L. Woodbury

Biological Systems Engineering: Papers and Publications

Manure is applied to cropland areas with varying surface cover to meet single- or multiple-year crop nutrient requirements. The objectives of this field study were to (1) examine microbial transport following land application of manure to sites with and without wheat residue, (2) compare microbial loads following land application to meet the 0, 1, 2, 4, and 8-year P-based requirements for corn, and (3) evaluate the effects of rainfall simulation run on microbial transport. Manure was added and incorporated by disking plots that were 0.75 m wide by 2.0 m long. Three 30 min simulated rainfall events, separated by 24 …