Engineering Commons^™

Lego Robotics Club, Keith Tran

Honors Program: Expanded Learning Clubs

An after school club focused on problem solving and computational thinking using LEGO Mindstorm EV3.

Santa Clara Magazine, Volume 61 Number 2, Spring 2020 [Print Issue V.61:1], Santa Clara University

Santa Clara Magazine

14 - THE UPSTART How Michael Mondavi ’66 helped get Napa on the wine map. By Ron Hansen.

18 - OF WOMEN AND MEN Emeritus professors dish on their research into wine and women. By Tracy Seipel.

22 - A SIGN OF LIGHT A Jesuit priest finds meaning on death row. By George Williams, S.J.

26 - FIRE AND WINE As the climate changes, what’s next for wine remains murky. By Tracy Seipel.

Morphology And Structure Of Pb Thin Films Grown On Si (111) By Pulsed Laser Deposition, Bektur Abdisatarov

Masters Theses & Specialist Projects

Pulsed laser deposition (PLD) is a versatile thin film deposition technique in which high powered laser beam interacts with a target material inside an ultrahigh vacuum chamber. Highly energetic particles such as electrons, atoms, protons, and ions generate a plasma plume that directed towards a substrate material where recondenses form a thin film. PLD is an effective and reliable method to create varieties of thin films such as metal, polymer, and ceramic for many technologically essential applications.

In this study, thin Pb films were grown by pulsed laser deposition on Si (111) at various laser fluences, pulse wavelengths, deposition times, …

Classification Of Seismic Vulnerability Based On Machine Learning Techniques For Rc Frames, Seyed Hooman Ghasemi, Hossein Bahrami, Mahdi Akbari

Henry M. Rowan College of Engineering Departmental Research

Seismic vulnerability means the inability of historical and monumental buildings to withstand the effects of seismic forces. This article presents a classification model to specify the damage state of the Reinforced Concrete (RC) frames based on a collection of datasets from the damaged buildings in Bingol earthquake of Turkey for use in the learning process of the algorithm. The proposed model uses two classifiers including the redundancy and also the construction quality of the buildings to estimate the class of damage from four categories including none, light, moderate and severe. The available database of the considered earthquake includes the information …

The Application Of Evolutionary Algorithms In Multi-Objective Design And Optimization Of Air Cooled Heatsinks, Younis Osama Abdelsalam, Sajad Alimohammadi, Tim Persoons

Articles

Genetic algorithms (GAs) are considered to be one of the main types of evolutionary algorithms (EAs) and are being increasingly used in various engineering design applications. To a large extent, plate-fin heatsinks are used in the thermal management of compact electronic equipment and data centers. The shape optimization of the heatsinks is not rigorously investigated during the design process of high power electronics. Any improvements in the effectiveness of the heatsinks impact the energy consumed by large-scale information communication technology (ICT) facilities including data centers and telecommunication systems and promote a more sustainable use of raw materials. This paper investigates …

Lecture Notes: Nonlinear Optimization And Matlab Optimization Toolbox Example, Lina Sela

All ECSTATIC Materials

No abstract provided.

Lecture Notes: Multi-Objective Optimization, Lina Sela

All ECSTATIC Materials

No abstract provided.

Video Conversations - The Future Of The Colorado River, John C. Schmidt, David E. Rosenberg

All ECSTATIC Materials

This video series explores key Colorado River management issues with key managers across the basin. Video discussions in the table on the next page are presented in the order they were recorded. Topics include river ecosystems, California, Upper Basin, Tribal, and Federal perspectives, as well as future hydrology and climate. Each video runs for 60 to 90 minutes. Speakers start by describing how they got to the place they are professionally. There are prepared remarks and questions and answers from participants who attended at the time the video was recorded. Links to suggested readings are provided. Click the VIDEO url …

Computational Approach To Correcting Joint Instability In Patients With Recurrent Patellar Dislocation, Oliver Alvarez, Robert N. Steensen, Paul J. Rullkoetter, Clare K. Fitzpatrick

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Patellar dislocation is a debilitating injury common in active adolescents and young adults. Conservative treatment after initial dislocation is often recommended, but almost half of these patients continue to suffer from recurrent dislocation. The objective of this study was to compare preoperative patellofemoral joint stability with stability after a series of simulated procedures, including restorative surgery to correct to pre-injury state, generic tibial tubercle osteotomy, patient-specific reconstructive surgery to correct anatomic abnormality, less invasive patient-specific surgery, and equivalent healthy controls. Three-dimensional, subject-specific finite element models of the patellofemoral joint were developed for 28 patients with recurrent patellar dislocation. A …

California High Speed Rail Central Valley Realignment, Jossian Pineda, Devin Schmidt

Civil, Environmental and Sustainable Engineering Senior Theses

The California High-Speed Rail in California has exceeded its budget and proven that typical methods of laying out High-Speed Rail were inefficient and detrimental to residents. By analyzing routes where the High-Speed Rail could instead be routed through medians or dead space around existing freeways, the project team determined the feasibility and cost efficiency of such an undertaking. The team analyzed multiple routes and upon choosing the best route, completed a curve analysis on a portion of the alignment, as well as completed an analysis on typical bridges that would be required. The analysis proved that utilizing this median space …

Microfluidic Liquid Biopsy For Cancer Prognosis, Brendan Heap, Anthony Ramirez Guerrero, Sam Nichols

Bioengineering Senior Theses

Leukemia is a deadly and common cancer, especially in children and adolescents. The misdiagnosis and unexpected complications during the treatment are some factors that increase the mortality rate of leukemia. The goal of our project was to create a device that would quickly and accurately assess these complications. While there are existing tests that can perform a single test for either metastasis or sepsis, there are none that can test for both simultaneously and rapidly. We propose to modify and combine some of these existing microfluidic designs as well as create a new component to perform a combinatorial assessment. While …

Solar Panel Monitor And Data Logger, Ryan Murray, Sharan Singh

Electrical and Computer Engineering Senior Theses

When deploying systems halfway across the world, having some system for monitoring their performance and status is essential. All We Are, in their mission to build solar panel installations in Uganda, encounters this problem daily. For our project, we worked with All We Are to deliver a system to monitor these solar installations. Building an embedded solution that can communicate with the solar installations and upload the data to the cloud allowed us to accomplish this goal. Our system connects data from the existing solar panel infrastructure to the cloud. The platform of our system is a Raspberry Pi microprocessor. …

Advanced Mechatronics, Hao Su

Open Educational Resources

Project-based course on the design of mechatronic devices to address needs identified by hospital-based clinicians and industry. Students work in teams to develop a mechatronic prototype. The lectures will cover the design of medical devices and robotics including sensors, actuators, and robots. The students will communicate with customers to understand design needs, then conduct study on prior art, intellectual property, due diligence, and idea conceptualization. Students will present ideas in class and to a broad audience from local industry. Students will also write a publication-quality final report, which they will be encouraged for publication submission.

Engineering Design I, Hao Su

Open Educational Resources

Introduction to robotics

“Gobabygo!” Rehab Engineering To Make Children Mobile, Connor Albin, Chase M. Pfeifer

UCARE: Research Products

GoBabyGo! is a project to give children with movement difficulties a chance to move on their own. GoBabyGo! conducts community builds of modified ride-on-cars for these children and grants them mobility. Once issue is that once children have cars, there is no feedback to improve future builds. This project "“GoBabyGo!” – Rehab Engineering to Make Children Mobile," wishes to collect quantifiable data on how these cars are being used and how they can be improved. This project aims to do this by collecting surveys from caretakers and through a programmed module to be installed in cars. The installed car module …

Mechanobiology Of Breast Cancer Cells, Shea Thompson

UCARE: Research Products

Mechanobiology Cells response to mechanical loading Mechanical loading includes Shear flow, Stretching, Compression

How does shear flow effect breast cancer cell migration in a three dimensional space?

By going through the engineering cycle, I was able to successfully convert the Parallel Flow Chamber into a Three Dimensional Flow Chamber. At this point, I have no results due to the COVID-19 outbreak.

Future Research Understanding how breast cancer migrates is essential to preventing the spread of cancer. While other chemical means have been investigated, mechanotransduction is relatively unexplored. Next step: Mechanobiology of breast cancer cells moving through a maze Cells have …

Synthesis Of Sic Resin For 3d Printing Of Sic Ceramics By Digital Light Processing, Kevin Zhao, Bai Cui

UCARE: Research Products

Silicon carbide (SiC) resin is produced through shear mixing 0.1-1 μm SiC powders with Tethon’s high load Genesis resin base. Resins of varying SiC vol.% were synthesized to test the loading limit of the resin base; 10, 20, and 30 vol.% of SiC were made with the resin base handling the higher loads quite well. Several attempts were made at printing using the Tethon Bison 1000 DLP printer with higher loads of SiC showing better results even with lower intensity UV lights andtimes.

Fabrication Of Composite Membranes For Solar-Thermal Desalination, Andrew Mason, Mahdi Mohammadighaleni, Siamak Nejati

UCARE: Research Products

With rising human populations, the demand for freshwater is an ever-growing problem. One emerging technology to combat this problem is membrane distillation (MD). MD has several advantages for water desalination such as:

•100% rejection of solute (salt, heavy metals, etc.) •Mergeable with other affordable energy sources (solar heat, electric resistance, etc.)

However, at the moment the specific energy consumption (SEC) of MD is very high due to low water production rates and large energy inputs to heat water. In a solar-assisted design for MD, the high cost of solar collectors (~$200/m2) inhibits low cost of water production in comparison to …

Evaluation Of The Embedded Environmental Impacts Of The Sanitary Sewer System Using Life Cycle Assessment, Kimberly Law

UCARE: Research Products

This study identifies the overall impact that the installation and construction phase of sanitary sewer systems have on the environment. Construction data on sanitary sewer systems from small Nebraska communities was collected and compared to the operating phase of the sanitary sewer. The operating phase is the energy required for the lift station. Analyzing sanitary sewers during their entire life cycle involved the raw materials, infrastructure construction, installation, operation of the system, and maintenance.

Wastewater treatment systems are meant to reduce the negative impact that humans have on the environment. The purpose of the system is to treat and disinfect …

Pool Boiling Inversion On Femtosecond Laser Surface Processed 304 Stainless Steel And Its Impact On Steady-State Time Constants, Justin Costa-Greger, Alfred Tsubaki, Josh Gerdes, Mark Anderson, Craig Zuhlke, Dennis Alexander, Jeff Shield, George Gogos

UCARE: Research Products

FLSP surfaces resulting in boiling inversion require longer times to reach steady-state once inversion has occurred Boiling inversion has been shown to be the result of changing nucleation dynamics in which a large number of nucleation sites activate Increased time required to reach steady-state is linked to the rate at which these nucleation sites activate. Heat fluxes above the boiling inversion point can require up to an additional 3 hours to reach steady-state, compared to the typical 15-20 minutes reported in the literature

Publisher Correction: Memote For Standardized Genome-Scale Metabolic Model Testing., Christian Lieven, Moritz E Beber, Brett G Olivier, Frank T Bergmann, Meric Ataman, Parizad Babaei, Jennifer A Bartell, Lars M Blank, Siddharth Chauhan, Kevin Correia, Christian Diener, Andreas Dräger, Birgitta E Ebert, Janaka N Edirisinghe, José P Faria, Adam M Feist, Georgios Fengos, Ronan M T Fleming, Beatriz García-Jiménez, Vassily Hatzimanikatis, Wout Van Helvoirt, Christopher S Henry, Henning Hermjakob, Markus J Herrgård, Ali Kaafarani, Hyun Uk Kim, Zachary King, Steffen Klamt, Edda Klipp, Jasper J Koehorst, Matthias König, Meiyappan Lakshmanan, Dong-Yup Lee, Sang Yup Lee, Sunjae Lee, Nathan E Lewis, Filipe Liu, Hongwu Ma, Daniel Machado, Radhakrishnan Mahadevan, Paulo Maia, Adil Mardinoglu, Gregory L Medlock, Jonathan M Monk, Jens Nielsen, Lars Keld Nielsen, Juan Nogales, Intawat Nookaew, Bernhard O Palsson, Jason A Papin, Kiran R Patil, Mark Poolman, Nathan D Price, Osbaldo Resendis-Antonio, Anne Richelle, Isabel Rocha, Benjamín J Sánchez, Peter J Schaap, Rahuman S Malik Sheriff, Saeed Shoaie, Nikolaus Sonnenschein, Bas Teusink, Paulo Vilaça, Jon Olav Vik, Judith A H Wodke, Joana C Xavier, Qianqian Yuan, Maksim Zakhartsev, Cheng Zhang

Articles, Abstracts, and Reports

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Program And Proceedings: Nebraska Academy Of Sciences 1880–2020, 140th Anniversary Year, One Hundred-Thirtieth Annual Meeting

Nebraska Academy of Sciences: Programs and Proceedings

No abstract provided.

Lablineup: An Intuitive Web Application For Queueing Help Requests In Academic Labs, Graham Mcdonald

Senior Theses

LabLineup is a start-up project designed to address the needs of large, lab-based classes, where teaching assistants (TAs) struggle to assist students in the order in which they request help. LabLineup is a lightweight web application that allows TAs and professors to accept requests for help in order. LabLineup allows professors to view the requests for a lab and see frequently asked questions that can be addressed en masse rather than individually. LabLineup also allows students to provide TA feedback. LabLineup addresses issues arising from requesting help in large, lab-based classes in the most efficient manner possible.

Defect Characterization Of Additively Manufactured Parts, Sabrina D'Alesandro, Joy Gockel, Andrew Harvey

Celebration of Undergraduate & Graduate Research, Scholarship, and Creative Activities Materials

This document describes various image processing techniques to be used for defect characterization of additively manufactured parts. This will help the reader gain knowledge of materials science engineering and the nuances in analyzing data from image processing software.

Additive manufacturing is shaping the manufacturing world through simplistic household printers’ to more complex metal printers used for a variety of applications. Specifically, laser powder bed fusion (LPBF) is an additive manufacturing process that deposits metal powder over the build plate and melts it with a laser in the shape of the build part. In order to make LPBF more efficient with …

Impulse, Spring 2020, Matt Schmidt, Emily Weber, Micayla Standish, Christine Delfanian, Landon Dierks, Dave Graves

Impulse (Jerome J. Lohr College of Engineering Publication)

[Page] 2 Rich Reid Retiring
[Page] 6 The Konda Connection
[Page] 8 Major Grant for Power Systems Research
[Page] 10 A Drone that can Carry Humans?
[Page] 12 New Department Head for EE/CS
[Page] 14 The Making of MEDQ Systems Consulting
[Page] 15 Dean's Advisory Council Profiles
[Page] 16 Distinguished Engineer Larry Weiss
[Page] 18 Vital Statistics
[Page] 20 Engineering Meets Entrepreneurship
[Page] 22 Faculty Awards
[Page] 24 Linda Wendt Retiring
[Page] 25 Strategic Plan in Place
[Page] 28 Dean's Club
[Page] 30 High-Impact Team Center Planned
[Page] 32 Research Takes Off for New Faculty Member
[Page] 33 Tyler Hanks …

Usu Engineering Education Student Receives Nsf Research Fellowship, Usu College Of Engineering

College of Engineering News

April 1, 2020 — A Utah State University doctoral student will receive one of the nation’s most distinguished student research fellowships valued at approximately $138,000.

Cyber Security Techniques- What Is The Internet?, Amy J. Ramson

Open Educational Resources

The lecture presents information about how the Internet works so students studying cyber security can better understand how cybercriminals commit their crimes. The lecture provides elemental concepts so students of all disciplines, from computer engineering to criminal justice and law can obtain a basic foundation.

A Novel Method For Making Titanium Dioxide For Photocatalytic Applications, Gary Wilson

Graduate Theses & Non-Theses

Titanium dioxide possesses near-ideal properties for large-scale application as a photocatalyst. It is cheap and abundant, nontoxic, and environmentally safe. However, it still suffers from logistical problems preventing its application in industry: namely, rapid electron-hole recombination and inability to utilize visible light. For nearly five decades researchers in this booming field have made numerous attempts to address these problems, doping and combining titanium dioxide with a wide range of materials. A novel ambient-temperature approach to synthesis and doping/modification of anatase-form titanium dioxide was attempted using both oxygen-rich and oxygen deprived synthetic routes. Reactants were exposed to various wavelengths of ultraviolet …

Mineralogy, Fluid Inclusion, And Stable Isotope Studies Of The Hog Heaven Mining District, Flathead County, Montana, Ian Kallio

Graduate Theses & Non-Theses

The Hog Heaven mining district in northwestern Montana is unique in that it is a high-sulfidation epithermal system containing high Ag-Pb-Zn relative to Au-Cu, with a very high Ag to Au ratio (2,330:1). The deposits are hosted within the Cenozoic Hog Heaven volcanic field (HHVF), a 30 to 36 Ma suite that consists predominantly of rhyodacite flow-dome complexes and pyroclastic rocks. The HHVF is underlain by shallow-dipping siliclastic sediments of the Mesoproterozoic Belt Supergroup. These sediments are known to host important SEDEX (e.g., Sullivan) and red-bed copper (e.g., Spar Lake, Rock Creek, Montanore) deposits rich in Ag-Pb-Zn-Cu-Ba. The HHVF erupted …

Nadir And Oblique Uav Photogrammetry Techniques For Quantitative Rock Fall Evaluation In The Rimrocks Of South-Central Montana, Micah Gregory-Lederer

Graduate Theses & Non-Theses

As our cities expand into geologically sensitive areas across the greater Rocky Mountain region and beyond, quantitative methods of assessment are increasingly critical for the development of evidence-based alternatives to avoid or mitigate geologic hazards. Unmanned Aerial Vehicle (UAV) photogrammetry can improve these geologic investigations by enabling remote visual inspection, measurement, and spatial analysis while eliminating many of the physical access limitations that contribute to field sampling bias and human error. UAV photogrammetry technology was employed to evaluate fragmental rock fall hazards at two locations in the Rimrocks region of south-central Montana, Zimmerman Trail Road and Phipps Park. At these …