Engineering Commons^™

An Analysis Of The Cost Impacts Experienced By Drywall Subcontractors During Covid-19, Brenden Schow

Construction Management

Covid-19 has presented issues in many forms for the drywall tenant improvement (TI) industry due to regulations and restrictions instilled in the Bay Area, California. This report details appropriate implementation of force majeure clause in contracts, stay-at-home orders with regard to construction and updated OSHA requirements. It then goes into analysis on cost impacts observed by various drywall companies operating in the Bay Area and how they are created and controlled. This analysis is supported by interviews conducted with representatives from six different drywall subcontractors who are involved in the estimating and bidding process. Interviews consisted of eight open ended …

Preconstruction Plan For Stairs At West Cerro Vista Apartments, Kian D. Kemp

Construction Management

Students at California Polytechnic University have created an unsafe dirt trail down a hillside west of the Cerro Vista Apartment Complex on the university’s campus. This heavily traveled trail is a shortcut to an existing pedestrian pathway which connects Village Drive to Poly Canyon Village, as well as the R-3 and R-4 parking structures. The use of this trail raises alarm for potential safety concerns for students using it, especially during winter months when the hillside becomes very slippery. This paper outlines the design and preconstruction plan for the West Cerro Vista Stair Project, which proposes replacing the current trail …

Making Commuting Satisfying For The Employees By Allocating Them To The Proximate Jobsite, Yoo H. Kim

Construction Management

Building a structure is a long process and it is the construction manager’s job to verify and be prepared for any curve balls that can occur. However, construction managers can often get busy and get carried away by their responsibilities and inevitably pay less attention for employee's life after work. For my Senior Project, I have put together a website that can be used by the construction managers to allocate work not only based the skillset but also based on proximity. The name of the website is ✦Proximate and it uses Google Earth Outreach (free tool) to make allocation possible. …

The Enduring Threats Of California Wildfires: How Construction Companies Must Adapt, Connor Welch

Construction Management

California wildfires are among the most pervasive and commonly occurring natural threats to the state. Especially considering the incremental increase in frequency and destruction of wildfires, there is a crucial need for modernized policies aimed at both preventative measures as well as viable responses. My project will analyze how the exponentially growing prominence of California wildfires has affected the landscape of the construction business, revealing the need for modernized protocols that could aid in prevention. These factors include the full scope of short and long term economic damages inflicted by wildfires, fluctuations in labor and material prices, and resulting disruptions …

Users Background And Perception Of Robotic Demolition Equipment, Matthew Elston Jones

Construction Management

Robotic demolition equipment or demolition robots are robots that resemble excavators without the cab, that can be controlled by an operator at a safe distance. This equipment can access hazardous environments and provides versatility in the demolition methods possible. Robots have become a popular choice for contractors looking for a competitive advantage. Currently there is little research about the demolition robot market and how the industry views the technology. This research first seeks to answer background questions on the users and their experience with demolition robots. The research also answers perception questions such as the benefits, drawbacks, and reasons for …

Covid-19 Impact On Construction Companies And Responses To The Pandemic, Justin Kyle Reno

Construction Management

The end of 2019 and throughout 2020 brought along the COVID-19 pandemic which majorly impacted the construction industry. For construction work to continue through the pandemic, adjustments to procedures and protocols were made that satisfied city and state requirements to reduce the virus spread. Since the virus is deemed highly contagious it is much easier to contract than a common flu, making containment for any potential spread a high priority. Understanding different companies’ responses to the pandemic at the construction jobsite level provides opportunities to implement procedures to stop the spread of the virus. Using in-depth interviews, this paper examines …

Understanding Culture Within The Construction Industry Through Lifelong Learning (Slo 24), Skylar Schrank

Construction Management

Understanding cultural differences is a crucial step for the success of a construction firm. Creating a common ground for diversifying the perspectives of individuals in the construction industry will prove to progress the success of a company and the projects that are a part of these firms. This study guide will define what culture means for construction, the different types of cultures in the construction industry, as well as how to implement cultural background in our education for cultural understanding. The result will be an understanding on how culture poses a risk to construction and how these risks can be …

Returning To Learn By Doing, Jeremiah W. Miller

Construction Management

The objective of my senior project was to help return the Cal Poly SLO Construction Management Department to their hands-on labs after the COVID-19 Pandemic forced all learning to go virtual. To return to hands-on labs, I needed to create a set of protocols that faculty and staff could use before, during, and after the labs to prevent the spread of COVID-19. These protocols needed to be simple enough that professors could use them every day and effective enough to make students feel safe to continue attending in person labs. If these protocols were to be accepted, they would need …

Virtual Recruiting: The Impact Of Virtual Interviews & Hiring Events On Construction Students, Abram G. Briones-Colman

Construction Management

Recruitment from college construction programs was drastically altered by not being allowed to gather in person in large groups for the majority of 2020. Companies could no longer recruit in person as they had at past college events, and instead connected and communicated with students virtually. The construction management department at California Polytechnic State University San Luis Obispo (Cal Poly), bridged this gap between recruiting companies and current students, at a virtual career fair using a collaborative hub built on Microsoft Teams. Data was gathered from students via a survey after attending this first departmental virtual fair, to measure impacts …

The Feasibility Of Real Time Location Systems In Construction, John O. Brouse Iv

Construction Management

The construction industry is becoming increasingly sophisticated by implementing new computer-based technologies to improve safety, efficiency, accountability, and many other aspects. One new type of technology that is becoming increasingly popular in other labor based industries is real time locating systems. These systems allow for managers to keep accountability of a variety of assets in a manufacturing facility or industrial center. Recent research has shown the benefits and potential uses of these systems on construction jobsites. This paper seeks to analyze the potential for Real Time Location Systems (RTLS) to be used on construction jobsites and compare the different RTLS …

Analysis Of Working From Home Vs Working At The Office, As A Construction Company In The Bay Area, Kyle M. Ruff

Construction Management

In 2020, working from home has become an increasingly popular trend amongst construction offices across the Bay Area to combat the spread of COVID-19. This meant that employees who used to commute were now able to work from home. This paper analyzes the impacts working from home has on the productivity, work-life-balance, and overall well-being of a Bay Area construction office employees . A survey was issued to the estimating department of a large general contractor in the Bay Area, with the intent of finding the impact working from home had on the three aspects of working life, as previous …

Diversity And Inclusion In The Workplace: A Comparative Analysis Between A Large And Small Company, Andrew K. Hernandez

Construction Management

The construction industry in recent times have seen an increase in inclusivity and diversity among the workplace. The industry seems to make improvements and steps to create an overall accepting workforce. However, there is still a need to produce a more inclusive work environment. There are many organizations and legal requirements that push for improving diversity throughout companies, but still the industry struggles to do so. Improving diversity in the workforce can reach out to more personnel with talent and skill to possibly attack the trade labor shortage in this industry. Analytical research methods in these reports were used to …

Application Of Autonomous Equipment In Heavy Civil Construction, Roman J. Ruffino

Construction Management

The prevalence of autonomous vehicles in our everyday lives is continually growing. Automobile manufacturers such as Tesla have made great strides in building a car that can safely navigate the world around it and respond to sudden changes. There is great potential in the heavy civil construction industry for equipment such as bulldozers, scrapers, and transport vehicles to add another level of safety and efficiency to the worksite. The goal of this research will be to determine whether a contractor would actually apply this technology, or if it isn’t practical for everyday use. This paper will examine the current state …

Pismo Beach Lions Club Sidewalk Replacement, Ramon Hernandez Jr

Construction Management

The objective of this senior project was to provide a long lasting and safe sidewalk for all the people that attend the Lions Club for future events. The idea came to be after talking to Karen Walsh, and how many previous visitors had tripped and fallen from the uneven sidewalk. The sidewalk was originally poured over 30+ years ago, and it was time for a newly built pathway. The project involved creating an estimate, schedule and coordinating with the club to see the project all the way through. The new sidewalk is now built stronger than ever before and is …

Manipulating Air-Gap Electrospinning To Create Aligned Polymer Nanofiber-Wrapped Glass Microfibers For Cortical Bone Tissue Engineering, Houston R. Linder, Austin A. Glass, Delbert E. Day, Scott A. Sell

Materials Science and Engineering Faculty Research & Creative Works

Osteons are the repeating unit throughout cortical bone, consisting of canals filled with blood and nerve vessels surrounded by concentric lamella of hydroxyapatite-containing collagen fibers, providing mechanical strength. Creating a biodegradable scaffold that mimics the osteon structure is crucial for optimizing cellular infiltration and ultimately the replacement of the scaffold with native cortical bone. In this study, a modified air-gap electrospinning setup was exploited to continuously wrap highly aligned polycaprolactone polymer nanofibers around individual 1393 bioactive glass microfibers, resulting in a synthetic structure similar to osteons. By varying the parameters of the device, scaffolds with polymer fibers wrapped at angles …

Organize, Prepare, And Painting Project: Pismo Beach Lions - Club, Luis Badillo

Construction Management

This paper explains the management process and execution of a project based senior project painting for a nonprofit. The main aim of the project was to give back to a charity organization that offers their time and energy to support their local community. This project occurred during the COVID 19 pandemic, and appropriate safety protocols were used including in communicating with the club representatives. The Pismo Beach Lions Club building was weathered and in need of fresh paint. The original color logo of the Lions Club is blue and white and was preferred that the building remain the same colors. …

Case Study: Effects Of Covid-19 On A Mid-Size San Francisco Commercial General Construction Company, Andrew G. Maxwell Jr

Construction Management

The Covid-19 pandemic has had an adverse effect on the commercial construction industry. New safety procedures and regulations set by local government and health officials have made it difficult for construction to proceed at the efficiency level it had prior to the pandemic. The San Francisco Bay Area was subject to strict protocols starting in March of 2020 that vastly limited the capability of construction companies to perform work. This case study looks into the ways in which a mid sized commercial general construction contractor from the San Francisco Bay Area was impacted by Covid-19 and the methods they used …

Implementation Of Bluebeam To The Fundamentals Of Construction Management Course, Kirk Arena

Construction Management

This project based senior project was brought about by Paul Weber and Matty Reed and was originally intended to take the paper-based binders from the Fundamentals to Construction Management course and organize these binders in Bluebeam. Bluebeam is an industry standard for nearly all construction projects, and an early adoption of the software could allow students to familiarize themselves with a tool that they will use after college or during internships. After deliberating with Paul, we concluded that we could better educate students by creating exercises that allow students to learn the tools available in Bluebeam through interactions in the …

An Efficient 3-D Stochastic Hie-Fdtd Algorithm For Investigation Of Statistical Variation In Electromagnetic Field, Kaikun Niu, Zhixiang Huang, Xingang Ren, Ke Xu, Minquan Li, Xianliang Wu, Ping Li, Lijun Jiang, Hakan Bagci

Electrical and Computer Engineering Faculty Research & Creative Works

We propose a stochastic hybrid implicit-explicit finite-difference time-domain method (S-HIE-FDTD) to compute the mean and variance of the electromagnetic (EM) fields using a single simulation, given those of the conductivity and permittivity in the computation domain. The mean and variance field update equations underlying the proposed method are derived from the field update equations of the 'traditional' deterministic HIE-FDTD. The Courant-Friedrichs-Lewy condition of the S-HIE-FDTD depends on the spatial discretization sizes only in two dimensions; therefore, for computation domains with fine geometric features only in the remaining dimension, it uses a time step size that is larger than that of …

Spatially Directed Functionalization By Co-Electropolymerization Of Two 3,4-Ethylenedioxythiophene Derivatives On Microelectrodes Within An Array, Benjamin J. Jones, Carol Korzeniewski, Jefferson H. Franco, Shelley D. Minteer, Ingrid Fritsch

Chemistry & Biochemistry Faculty Publications and Presentations

Electrodeposited conductive copolymer films with predictable relative properties (quantities of functional groups for further modification and capacitance) are of interest in sensors, organic electronic materials and energy applications. Potentiodynamic copolymerization of films in aqueous solutions of two different thiophene derivatives, (2,3-dihydrothieno[3,4-b]dioxin-2-yl) methanol (1) and 4-((2,3-dihydrothieno[3,4-b][1,4]dioxin-2-yl)-methoxy)-4-oxobutanoic acid (2), containing 0.02 M total monomer (0, 25, 34, 50, 66, 75, 100 mol% 2), 0.05 M sodium dodecyl sulfate, and 0.1 M LiClO4, on gold microelectrodes in an array was investigated. Decreasing monomer deposited (m) from 0 to 100 mol% 2 is attributed to a decreasing pH that inhibits electropolymerization. Molar ratios of …

Cellular Attachment On Poly(Lactic Acid) For Use In Tissue Engineering, Stephen R. Hunter

Masters Theses

Tissue engineering is a promising new method for organ regeneration. This method can be used to repair damaged tissue, or possibly replace a fully functional organ. In summary, a biopsy is taken from a donor, isolated, then grown onto a framework resembling an organ. Once grown; it is then transplanted into the patient. Over time, the body will degrade the scaffold, leaving the organ or tissue in its place. As this scaffold is present in the body for an extended time; factors like biocompatibility, toxicity, immunogenicity, and structural stability must be researched.

Several polymers have already been researched for use …

Experimental Analysis Of Heat Generation In Carbon, Mounisha Ganesan

Doctoral Dissertations and Master's Theses

The purpose of this research is to study a novel non-covalent functionalization technique of single-walled carbon nanotubes (SWCNTs) and to examine the feasibility of using carbon nanotube films as thin film heaters. We developed a unique methodology to synthesize a well dispersed, environmentally friendly solution of CNTs that could be easily spin coated as well as spray coated on different substrates based on the application. Using the produced solutions, thin films of SWCNTs were fabricated on a glass substrate. Two sets of experiments were conducted to study the influence of polyaromatic moiety and the pH on the electro thermal characteristics …

Constrained Motion Analysis Of Spacecraft Trajectory In Restricted Three Body Problem, Harshkumar Patel

Doctoral Dissertations and Master's Theses

Due to the popularity of libration points, many satellites are being maintained on their desired trajectory. Indian space research organization has planned to launch the Aditya-L1 spacecraft to study about the Sun by 2021. James Webb Space Telescope has also been designed to observe deep space at L2 in the Sun-Earth system by 2021. The combined gravity of the Earth and the Sun keep satellite’s orbit locked at libration points. Though satellites enjoys an uninterrupted view of Sun and Earth all the time, they are affected by the solar radiation pressure (SRP) continuously. Due to the instability of collinear libration …

Hypersonic Heat Transfer Load Analysis In Star-Ccm+, Robert Comstock

Master's Theses

This thesis investigates the capabilities of STAR-CCM+, a Computational Fluid Dynamics (CFD) software owned by Siemens, in predicting hypersonic heat transfer loads on forward-facing surfaces. Results show that STAR-CCM+ predicted peak heat transfer loads within +/- 20% of experimental data on the leading edge of a delta wing design from the X-20 Dyna-Soar program with 73^o of sweep. Steady-state laminar simulations were run as replications of wind tunnel tests documented in NASA CR-535, a NASA technical report that measured and studied the hypersonic pressure and heat transfer loads on preliminary X- 20 wing designs across a wide range of …

Comparison Of Classification Algorithms And Undersampling Methods On Employee Churn Prediction: A Case Study Of A Tech Company, Heather Cooper

Master's Theses

Churn prediction is a common data mining problem that many companies face across industries. More commonly, customer churn has been studied extensively within the telecommunications industry where there is low customer retention due to high market competition. Similar to customer churn, employee churn is very costly to a company and by not deploying proper risk mitigation strategies, profits cannot be maximized, and valuable employees may leave the company. The cost to replace an employee is exponentially higher than finding a replacement, so it is in any company’s best interest to prioritize employee retention.

This research combines machine learning techniques with …

The Implementation And Comparison Of Fuzzy Logic Control Systems To Modern Control Methods On Low-Cost Hardware, Cristian A. Barron

Theses and Dissertations

Modern control engineering provides many options to automate systems for which a mathematical model is required. Another control does not rely on the mathematical model of the system and is known as fuzzy logic control. In this study, a literature review is conducted on existing control systems strategies such as proportional integral and derivative (PID), linear quadratic regulator (LQR), and fuzzy logic controller (FLC), the complexity of the systems they control, and their strengths and weaknesses. In addition, a series of experiments are conducted, both through simulations in MATLAB Simulink and using their implementation using the actual physical hardware to …

Optimizing A Railroad Bearing Condition-Monitoring Algorithm For Use With An Onboard Wireless Low-Power Sensor Module, Jonas Regan Leano Cuanang

Theses and Dissertations

An algorithm that utilizes vibration measurements was developed by the UTRGV Center for Railway Safety to monitor the condition of railroad bearings. This algorithm uses the data collected from accelerometers on the bearing adapters to determine if there is a defect, where the defect is within the bearing, and the approximate size of the defect. Laboratory testing was performed on the UTCRS single bearing test rig. A four-second sample window of the recorded vibration data is used by the algorithm to reliably identify the defective component inside the bearing with up to a 100% confidence level. However, considerable computational power …

Effect Of Adding Palm Fiber To Thermal Conductivity Of Quick Set Concrete, Monica Garcia

Theses and Dissertations

As climate change becomes a more dire issue and more readily accepted by those in power, the demand for local and systemic solutions grows louder. In urban environments, one issue of concern is the contribution of anthropogenic heat from buildings which contributes to localized warming of the environment. A method that can reduce anthropogenic heat is decreasing the thermal conductivity of building materials. The objective of this study is to examine the possibility of using palm fibers to reduce the thermal conductivity of quick-set concrete samples. The data gathered in this study are used to determine the thermal conductivity value …

The Design, Fabrication, And Testing Of A Cooling Garment, Richard James Garza

Theses and Dissertations

The aim of this research is to design a device or technology capable of cooling the user – such as a college student walking to class, for example – in a manner as convenient as putting on a jacket. The idea is to use the peltier effect – a phenomenon in which two dissimilar semi-conductors heat up and cool down with the application of an electric current – as the source of heat absorption used to cool the user. In this research it will be determined whether or not it is feasible to use such a phenomenon to keep the …

Assessing The Performance Of Reconditioned Railroad Tapered-Roller Bearings Used In Freight Rail Service, Veronica Valeria Hernandez

Theses and Dissertations

The rail industry currently utilizes two wayside detection systems to monitor the health of freight railcar bearings in service: The Trackside Acoustic Detection System (TADS™) and the wayside Hot-Box Detector (HBD). Bearings that are removed from service are sent to specialized facilities where they undergo a reconditioning process before the bearings can be returned to rail service. The reconditioning process has been used for decades although there has been no previous study on the effectiveness of the reconditioning process on defective bearings that were removed from service. This persuaded the researchers from the University Transportation Center for Railway Safety (UTRCS) …