Engineering Commons^™

Impact Of Implementing A Dedicated Outdoor Air System In Parallel With A Multi-Zone Variable-Air Volume System On Energy Consumption, Thermal Comfort, And Life Cycle Cost, Khaled Alghamdi

Graduate Theses, Dissertations, and Problem Reports (ETD)

Heating, Ventilating, and Air-Conditioning systems (HVAC) consume more than 40% of energy in commercial buildings, according to the Commercial Building Energy Consumption Survey in 2012. Therefore, efforts to reduce HVAC energy consumption would be significant in coping with energy-related issues. In that context and in order to enhance the indoor air quality without compromising for energy consumption, the concept of Dedicated Outdoor Air systems (DOAS) emerged.

The literature shows that the integration of DOAS with other HVAC systems has been studied widely, yet the impact of integrating DOAS in parallel with multi-zone Variable-Air Volume systems (multi-zone VAV) for an application …

Experimental Measurement Of Dielectric Properties Of Powdery Materials Using A Coaxial Transmission Line, Robert Tempke

Graduate Theses, Dissertations, and Problem Reports (ETD)

This study proposes a standard methodology for coaxial dielectric property measurements of powdery materials (1-10GHz) using a coaxial transmission line. Four powdery materials with dielectric constants ranging from 3.5 to 70 (SiO2, Al2O3, CeO2, and TiO2) were experimentally investigated at varying volume loading fractions in a paraffin mixture. A statistically significant number of paraffin heterogeneous-mixtures was synthesized for all dielectric powders. The dielectric properties of the constitutive materials were determined using appropriate mixture equations. The sensitivity of the equations dielectric prediction to volume loading is discussed with guidance on selecting the best mixing equation. It was determined that low volume …

Design And Implementation Of Model Predictive Control Strategies For Improved Power Plant Cycling, Xin He

Graduate Theses, Dissertations, and Problem Reports (ETD)

Design and Implementation of Model Predictive Control Strategies for Improved Power Plant Cycling

Xin He

With the increasing focus on renewable energy sources, traditional power plants such as coal-fired power plants will have to cycle their load to accommodate the penetration of renewables into the power grid. Significant overshooting and oscillatory performance may occur during cycling operations if classical feedback control strategies are employed for plantwide control. To minimize the impact when power plants are operating away from their designed conditions, model-based optimal control strategies would need to be developed for improved power plant performance during cycling.

In this thesis, …

Textured Contact Lens Based Iris Presentation Attack In Uncontrolled Environment, Daksha Yadav

Graduate Theses, Dissertations, and Problem Reports (ETD)

The widespread use of smartphones has spurred the research in mobile iris devices. Due to their convenience, these mobile devices are also utilized in unconstrained outdoor conditions. At the same time, iris recognition in the visible spectrum has developed into an active area of research. These scenarios have necessitated the development of reliable iris recognition algorithms for such an uncontrolled environment. Additionally, iris presentation attacks such as textured contact lens pose a major challenge to current iris recognition systems.

Motivated by these factors, in this thesis, a detailed analysis of the effect of textured contact lenses on iris recognition in …

Development Of A Task Analysis Tool To Estimate Shoulder Strain During A Lifting Task, Christopher Wayne Moore

Graduate Theses, Dissertations, and Problem Reports (ETD)

Musculoskeletal disorders of the shoulder have a huge impact on the workplace and employees. Due to the complexity and high mobility of the shoulder, developing a task analysis tool with a focus on the shoulder is difficult, and while there are some ergonomic analysis tools that do consider the shoulder to varying degrees in the analysis, none focus purely on the shoulder. Therefore, this research was undertaken in an attempt to develop a shoulder-based task analysis tool for the shoulder. However, since the scope of work involving the shoulder is so vast, the tool in this research focuses on unobstructed, …

Analysis Of User Preference With N95 And Powered Air-Purifying Respirators In A Healthcare Work Environment, Brittany Renee Carver

Graduate Theses, Dissertations, and Problem Reports (ETD)

For those working in the healthcare field, personal protective equipment is vital. Healthcare workers are often first responders when it comes to dealing with patients who are infected or when a disease outbreak occurs. The Occupational Safety and Health Administration (OSHA) requires all healthcare operations to provide employee protection against blood borne pathogens. With the increase of life-threatening disease outbreaks, such as SARS in 2003 and Ebola in 2014, it is of the upmost importance to make sure respirators are best suited for users and acceptable for long term use. It has been shown through previous studies that due to …

Numerical Modeling Of Hydraulic Fracture Propagation And Comparison With Microseismic Data At A Field Site, Carter Lawrence Hulcher

Graduate Theses, Dissertations, and Problem Reports (ETD)

A hydraulic fracturing site in Morgantown, West Virginia, USA was selected to be a research site for the Marcellus Shale Energy and Environment Laboratory (MSEEL) project which was funded by the U.S. Department of Energy (DOE). The overall objective of the MSEEL research project is to evaluate and improve technologies to enhance shale gas recovery with minimal impacts on the environment. The field site has two previously drilled wells and two newly drilled wells for extracting natural gas. A separate exploratory well (or “science well”) was also drilled and includes a geophone array to extract important seismic/microseismic event information, which …

A Framework For Energy Optimization Of Small, Two-Stroke, Natural Gas Engines For Combined Heat And Power Applications, Mahdi Darzi

Graduate Theses, Dissertations, and Problem Reports (ETD)

This research was focused on the development of a framework for the energy optimization a natural gas engine for small combined heat and power (CHP) applications operating with low-pressure natural gas (NG) available at homes. The required targets of the ARPA-E GENSETS program for 1 kW electric power generation and previous GENSETS simulation at West Virginia University, suggested a design space for the engine which is currently dominated by simple two-stroke designs. Hence this research focused on screening, modeling, and experimentally evaluation of cost-effective technologies to achieve a system design that maximized thermal efficiency and utilization factor, while reducing emissions. …

Comparison Of Drag Area Estimation Using Natural Coast Down And Constant Speed Test Methods, Cem Baki Mr

Graduate Theses, Dissertations, and Problem Reports (ETD)

Currently in US, more than 26 percent of the total GHG emissions comes from transportation and mostly from heavy duty vehicles. Similarly, the European Council stated that 25 percent of the emissions comes from heavy duty transportation and they expect it to be further increased in the future. However, with the new coming regulations US EPA and European Council aiming to reduce the emissions by 80 percent in US and 60 percent in EU. In order to keep track and control the emissions, both authorities published new regulations and testing methods for certifying the new vehicles.

Aerodynamic testing is one …

Investigation Of Various Factors Affecting Quantification And Characterization Accuracy Of Nox Measurement At Near Zero Level In A Cvs Sampling Set-Up, Samuel Abimbola Ogunfuye

Graduate Theses, Dissertations, and Problem Reports (ETD)

Accurate measurement of oxides of nitrogen (NOx) concentrations at near-zero levels using the constant volume sampling (CVS) system is a critical consideration in emissions quantification for engine and vehicle research and certification purposes. Various technological efforts and research are being implemented to ensure emissions from automobile and on-road transportation sources tend towards lower concentrations. This development has resulted in NOx concentration measurements to shift towards near-zero and thus, reach the detection limits of traditional measurement approaches and methods. There are several factors that might deter achieving measurement accuracy at this level, as their effect becomes significant at low NOx concentrations. …

Propagation And Morphology Of Premixed Flames In Obstructed Channels Under Atmospheric And Supercritical Conditions, Abdulafeez Akinola Adebiyi

Graduate Theses, Dissertations, and Problem Reports (ETD)

The understanding of the morphology and propagation of premixed flames in channels is vital for the design and development of efficient propulsion systems requiring high heat release, such as pulse detonation engines, and for resolving accidental fire in industrial conduits. In this work, extensive computational simulation of premixed flames in channels (with rectangular and cylindrical cross sections) with closely packed obstacles are carried out with the goal of providing insights into flame propagation under various conditions which would be invaluable to the development and safety of energy and propulsion systems as well as for the mitigation of accidental fires in …

Structural Behavior Of Steel Plate Embedded Hybrid Gfrp Shapes, Piyush R. Soti

Graduate Theses, Dissertations, and Problem Reports (ETD)

The civil infrastructure industry has been dominated by traditional materials such as steel, timber, and concrete. Although these materials offer great advantages, they have major durability issues in terms of corrosion, decaying, and cracking. Traditional material-based structures deteriorate frequently and require regular-interval repairs with huge expenditures. To resolve these maintenance and durability issues associated with traditional materials, fiber reinforced polymer (FRP) composites have gained some popularity in the past few decades because of their superior mechanical properties and durability. Carbon-FRPs (CFRPs) and glass-FRP (GFRPs) are the most commonly used FRPs in the market. However, in civil engineering applications, CFRPs are …

Genet-Cnv: Boolean Implication Networks For Modeling Genome-Wide Co-Occurrence Of Dna Copy Number Variations, Salvi Singh

Graduate Theses, Dissertations, and Problem Reports (ETD)

Lung cancer is the leading cause of cancer-related death in the world. Lung cancer can be categorized as non-small cell lung cancer (NSCLC) and small cell lung cancer (SCLC). NSCLC makes up about 80% to 85% of lung cancer cases diagnosed, whereas SCLC is responsible for 10% to 15% of the cases. It remains a challenge for physicians to identify patients who shall benefit from chemotherapy. In such a scenario, identifying genes that can facilitate therapeutic target discoveries and better understanding disease mechanisms and their regulation in different stages of lung cancer, remains an important topic of research.

In this …

Scaling Analysis And Experimental Investigation Of A Rotating Detonation Engine, David Thomas Billups

Graduate Theses, Dissertations, and Problem Reports (ETD)

Pressure gain combustion (PGC) technologies, specifically rotating detonation engines (RDEs), are poised to provide the next big leap in gas turbine engine advancement, significantly increasing the thermal. RDEs make use of thermodynamic advantages of isochoric as opposed to isobaric combustion. Theorized to increase thermal efficiency by up to 7% [1], the RDE would have significant impact on reducing anthropogenic carbon emissions. In addition to efficiency gains, the RDE also provides mechanical simplicity and reduced size advantages compared to it’s traditional counterparts and PGC competition.

The United States (U.S.) Department of Energy (DOE) National Energy Technology Laboratory (NETL) maintains and operates …

Short Beam Shear Strength Evaluations Of Gfrp Composites: Correlations Through Accelerated And Natural Aging, William Todd Barker

Graduate Theses, Dissertations, and Problem Reports (ETD)

Fiber Reinforced Polymers (FRP) composites have been materials of interest in replacing or reinforcing steel, wood, and concrete, but lack of understanding of degradation under physical and chemical aging is a main concern. Through many years of research, the understanding of aging or durability of GFRPs has improved. To be able to evaluate aging related degradation rates, an accelerated aging methodology under varying environments is introduced. Accelerated aging is a concept used to age composites in a lab controlled environment under varying pH conditions (2 to 13) and temperatures (~ -20° to +160°F). Once acceleratedly aged testing is completed, Arrhenius …

Design And Implementation Of An Instantaneous Fuel Mass Flow Measurement System For Use In Verification Of Locomotive Emissions, Adam Wayne James

Graduate Theses, Dissertations, and Problem Reports (ETD)

Located in Altoona, PA, the Juniata Thoroughbred Emissions Research lab has provided emissions testing and research for several locomotive companies such as CSX, Electro Motive Diesel (EMD), and General Electric (GE). The emissions laboratory measures locomotive emissions through partial flow dilution (PFD) sampling for particulate matter (PM) using a Sierra Instruments BG3 and measures raw gaseous emissions using a MEXA 7100D gaseous emission analyzer. Fuel consumption is measured on a gravimetric basis and is used in verification of proportional sampling of exhaust flow. There were two research goals for this study which were (1) verify that the emissions measurement system …

Retaining Wall System With Soldier Pile And Composite Resin Infused Lagging Elements, Shane Phillip Moore

Graduate Theses, Dissertations, and Problem Reports (ETD)

Retaining walls are used as an alternative to installing drainage and soil reinforcement, depending on site conditions. This report discusses the design of a retaining wall with steel soldier piles and lagging elements for rocky slopes. The design consists of six different options, three options with a span of eight feet and three options with a span of ten feet between soldier piles. The three options for both spans are the same concept but designed for different load conditions. These options include: timber with glass fiber reinforced polymers (GFRP) wraps, reinforced concrete with GFRP wraps, and an FRP Prodeck system …

Shear Stress Estimates In The Approach And Bridge Section By Using Various Formula, Jun Seon Lee

Graduate Theses, Dissertations, and Problem Reports (ETD)

Shear stress is the resistance force on top of the contact surface caused by moving flow and is one of the important variable in fluid mechanics. Thus, a lot of researches have been conducted to predict accurate value of shear stress. However, calculating shear stress with existing equations has several limitations because only gradually varied flow and/or uniform flow was considered in their studies. Therefore, direct applying those methods into complex flow type, such as around a bridge, to predict shear stress is questionable.

Thus, laboratory experiments were carried out in a laboratory flume to attack the objective of this …

Pharmaceutical Scheduling Using Simulated Annealing And Steepest Descent Method, Bryant Jamison Spencer

Graduate Theses, Dissertations, and Problem Reports (ETD)

In the pharmaceutical manufacturing world, a deadline could be the difference between losing a multimillion-dollar contract or extending it. This, among many other reasons, is why good scheduling methods are vital. This problem report addresses Flexible Flowshop (FF) scheduling using Simulated Annealing (SA) in conjunction with the Steepest Descent heuristic (SD).

FF is a generalized version of the flowshop problem, where each product goes through S number of stages, where each stage has M number of machines. As opposed to a normal flowshop problem, all ‘jobs’ do not have to flow in the same sequence from stage to stage. The …

Online Model Predictive Control Of A Nonisothermal And Nonisobaric Membrane Reactor For Water-Gas Shift Reaction Applications, Jacob Martin Douglas

Graduate Theses, Dissertations, and Problem Reports (ETD)

Online Model Predictive Control of a Nonisothermal and Nonisobaric Membrane Reactor for Water-Gas Shift Reaction Applications Jacob M. Douglas Modern hydrogen production units are tasked with producing the most hydrogen possible while dealing with flow variations caused by changing power demands. Classical methods for hydrogen production employing the water-gas shift reaction are governed by equilibrium limitations that take effect at high temperatures and high concentrations of H2 (Georgis, et al., 2014). The implementation of a membrane reactor with temperature control enables the hydrogen concentration and temperature to reach an equilibrium at a higher concentration of H2. Another challenge that is …

Effect Of Metacarpal Gloves On Pinch And Grip Strength, Aaron Anthony Fonner

Graduate Theses, Dissertations, and Problem Reports (ETD)

Hand Injuries are common in industrial settings. In 2014 alone, there were 137,440 total cases of hand injuries in the United States that required days away from work. Hand injuries can be classified into six general categories: lacerations, fractures and dislocations, soft tissue injuries and amputations, infections, burns and high pressure injuries. Some of these injuries can be prevented with proper personal protective equipment. In recent times, metacarpal gloves are widely used to protect the workers against hand/metacarpal injuries in various industries including mining. The benefits of wearing metacarpal gloves for protection are unquestionable, but little is known about how …

Design Of Experiment And Analysis Techniques For Fuel Consumption Data Using Heavy-Duty Diesel Vehicles And On-Road Testing, Sarah Ann Mills

Graduate Theses, Dissertations, and Problem Reports (ETD)

Chassis dynamometer and on-road testing are usually employed to test vehicle operation. Testing on a chassis dynamometer reduces data variability compared to on-road testing due to the controlled environment but it does not account for other important variables that affects real-world vehicle operation. This study used on-road testing to investigate the differences between two test fuels under real-world conditions. Three heavy-duty diesel vehicles were driven on different routes for a period of three months. Each vehicle was instrumented with flow meters to gather fuel consumption data, which was then compared to the fuel rate broadcasted by the engine control unit …

Impact Of Natural Fracture Induced Elastic Anisotropy On Completion And Hydraulic Fracturing Designs, Emre Can Dundar

Graduate Theses, Dissertations, and Problem Reports (ETD)

Shale has been usually recognized as a transverse isotropic (TI) medium in conventional geomechanical log interpretation due to its laminated nature. However, when natural fractures (NFs) exist in the rock body, additional elastic anisotropy can be introduced, converting Shale to an orthorhombic (OB) medium. Previous study illustrates that treating the naturally fractured shale rock as a TI medium by ignoring the NF-induced anisotropy can cause the erroneous estimation of the geomechanical properties (i.e. Young’s modulus, Poisson’s ratio, brittleness index, and etc.) and in-situ stress. In this paper, the study is extended to quantify the impact of NF-induced elastic anisotropy on …

Deformation Correlations And Machine Learning: Microstructural Inference And Crystal Plasticity Predictions, Michail Tzimas

Graduate Theses, Dissertations, and Problem Reports (ETD)

The present thesis makes a connection between spatially resolved strain correlations and material processing history. Such correlations can be used to infer and classify prior deformation history of a sample at various strain levels with the use of Machine Learning approaches. A simple and concrete example of uniaxially compressed crystalline thin films of various sizes, generated by two-dimensional discrete dislocation plasticity simulations is examined. At the nanoscale, thin films exhibit yield-strength size effects with noisy mechanical responses which create an interesting challenge for the application of Machine Learning techniques. Moreover, this thesis demonstrates the prediction of the average mechanical responses …

Intelligent Transportation Systems, Hybrid Electric Vehicles, Powertrain Control, Cooperative Adaptive Cruise Control, Model Predictive Control, Hadi Kazemi

Graduate Theses, Dissertations, and Problem Reports (ETD)

Information obtainable from Intelligent Transportation Systems (ITS) provides the possibility of improving the safety and efficiency of vehicles at different levels. In particular, such information has the potential to be utilized for prediction of driving conditions and traffic flow, which allows us to improve the performance of the control systems in different vehicular applications, such as Hybrid Electric Vehicles (HEVs) powertrain control and Cooperative Adaptive Cruise Control (CACC). In the first part of this work, we study the design of an MPC controller for a Cooperative Adaptive Cruise Control (CACC) system, which is an automated application that provides the drivers …

Evaluating Design Criteria For High Hazard Dams In A Changing Climate, Aaron Read Sutton

Graduate Theses, Dissertations, and Problem Reports (ETD)

With changes in climate, there is the potential for future flooding events to vary in frequency and magnitude. These changes may stress the 432 high hazard dames in West Virginia. The 100-year flowrate is an important design criterion for emergency spillways of high hazard dams. Emergency spillways are designed to be reached only by 100-year flow and above. This work quantified how changes in the 100-year flowrate may affect emergency spillway activation. Peakflow data from the Central Appalachian Ecoregion in WV, taken from 24 USGS gages, were used to analyze changes in the 100-year flowrate.

Flow frequency analysis revealed that …

Confirmation Of Data-Driven Reservoir Modeling Using Numerical Reservoir Simulation, Al Hasan Mohamed Al Haifi

Graduate Theses, Dissertations, and Problem Reports (ETD)

Data driven reservoir modeling, also known as Top-Down Model (TDM), is an alternative to the traditional numerical reservoir simulation technique. Data driven reservoir modeling is a new technology that uses artificial intelligence and machine learning to build full-field reservoir models using field measurements (data - facts) instead of mathematical formulations that represent our current understanding of the physics of the fluid flow through porous media. TDM combines all field measurements into a comprehensive reservoir model to predict the production from each well in a field with multiple wells.

There are many opinions, speculations and criticism about not using the physics-based …

Mechanism Study Of Shale Gas Conversion Via Chemical Looping And Heterocatalytic Processes, Lei Bai

Graduate Theses, Dissertations, and Problem Reports (ETD)

The shale gas revolution has significantly changed the energy landscape in US. The technical-feasible, energy-effective schemes for shale gas combustion and utilization, especially from remote resources, have attracted increasing interest due to expensive transportation/distribution cost. In this research, for the first time, chemical looping combustion (CLC) of methane with inherent CO₂ capture, oxidative coupling of methane (OCM) and dehydro-aromatization (DHA) of ethane are systematically studied as promising alternatives at O₂-rich, O₂-lean and non-oxidative conditions, respectively.

Chemical looping combustion is bridging clean fuel combustion in energy production with inherent CO₂ capture. CLC utilized an oxygen …

Reflectivity And Photoemission Electron Microscopy Studies Of Magnetic Heterostructures, Chih-Yeh Huang

Graduate Theses, Dissertations, and Problem Reports (ETD)

When a thin film thickness becomes ultrathin, the magnetic properties of the thin film can be altered, degraded or even lost. The loss of magnetism has been called the magnetic dead layer (MDL). Considering the trend for miniaturization of information storage and other devices, the MDL is a significant challenge for materials science and engineering. La_1-xSr_xMnO₃ (LSMO) with x=0.3 is an excellent model material that exhibits ferromagnetism at room temperature to study the MDL. This dissertation focuses on understanding the MDL in LSMO films on their own and the effect of this dead layer when …

Field Performance And Rating Evaluation Of A Modular Press-Brake-Formed Steel Tub Girder With A Steel Sandwich Plate Deck, Nicole Marie Hegele Underwood

Graduate Theses, Dissertations, and Problem Reports (ETD)

The Short Span Steel Bridge Alliance (SSSBA) is a group of bridge and culvert industry leaders (including steel manufacturers, fabricators, service centers, coaters, researchers, and representatives of related associations and government organizations) who have joined together to provide educational information on the design and construction of short span steel bridges in installations up to 140 feet in length. The SSSBA technical working group has developed a shallow press-brake-formed tub girder, a trapezoidal cold bent girder, to address the demand in the short span steel bridge market for rapid infrastructure replacement solutions.

Following extensive experimental testing and design work at West …