Engineering Commons^™

Static Testing Of Propulsion Elements For Small Multirotor Unmanned Aerial Vehicles, Robert W. Deters, S.C. Kleinke, Michael S. Selig

Publications

The growing use of small multirotor aircraft has increased the interest in having better performance results especially with the propulsion system. The size of the propellers used on these aircraft operate at low Reynolds numbers that are typically less than 200,000. Static performance testing of ten propeller pairs (tractor and pusher) were completed and is the beginning of a systematic test of propellers used on multirotor systems. The propellers chosen for this initial set of tests were selected from four popular quadrotors. Besides testing the propellers provided with the aircraft, propellers that are sold as replacements from third-party companies were …

Pilot Training Metrics At A Part 141 University Training Program, Steven Hampton, Dothag Truong, Ken Byrnes, Troy Techau

Publications

The study evaluates training at a collegiate flight training program providing metrics for time and costs from zero time to a Private Pilot. Training times for flights and activities are pulled from a sophisticated database used at Embry-Riddle Aeronautical University (ERAU) and matched with flight and ground school lessons and then further subdivided to determine the amount of time spent training in areas of operation that are prescribed by the Federal Aviation Administration in the published Practical Test Standards and Airman Certification Standards for those seeking pilot licenses and ratings. Provided are mean times and costs for a prospective pilot …

Influence Of Activated Carbon Surface Oxygen Functionality On Elemental Mercury Adsorption From Aqueous Solution, Emily K. Faulconer, David W. Mazyck

Publications

Mercury (Hg), though naturally occurring, is a toxic element. Exposure to various forms of mercury can be harmful for humans and ecosystems. Mercury-contaminated wastewater can be treated using activated carbon to adsorb the mercury, allowing for safe discharge. Wet chemical oxidation of activated carbon was performed to enhanced surface oxygen functionality, with the objective of enhancing aqueous ionic (Hg(II)) and elemental (Hg(0)) mercury adsorption. Characterization of the modified carbons included nitrogen adsorption-desorption, elemental analysis, point of zero charge, and total acidity titration. The concentration and identity of the modifying reagent influenced the characteristics of the carbons, including the surface oxygen …

The Soil Moisture Velocity Equation, Fred L. Ogden, Myron B. Allen, Wencong Lai, Jianting Zhu, Mookwon Seo, Craig C. Douglas, Cary A. Talbot

Publications

Numerical solution of the one-dimensional Richards' equation is the recommended method for coupling groundwater to the atmosphere through the vadose zone in hyperresolution Earth system models, but requires fine spatial discretization, is computationally expensive, and may not converge due to mathematical degeneracy or when sharp wetting fronts occur. We transformed the one-dimensional Richards' equation into a new equation that describes the velocity of moisture content values in an unsaturated soil under the actions of capillarity and gravity. We call this new equation the Soil Moisture Velocity Equation (SMVE). The SMVE consists of two terms: an advection-like term that accounts for …

Enhancing Anaerobic Digestion Of Food Waste Through Biochemical Methane Potential 1 Assays At Different Substrate: Inoculum Ratios, Shakira R. Hobbs, Amy E. Landis, Bruce E. Rittmann, Michelle N. Young, Prathap Parameswaran

Publications

Food waste has a high energy potential that can be converted into useful energy in the form of methane via anaerobic digestion. Biochemical Methane Potential assays (BMPs) were conducted to quantify the impacts on methane production of different ratios of food waste. Anaerobic digester sludge (ADS) was used as the inoculum, and BMPs were performed at food waste:inoculum ratios of 0.42, 1.42, and 3.0 g chemical oxygen demand/g volatile solids (VS). The 1.42 ratio had the highest CH4-COD recovery: 90% of the initial total chemical oxygen demand (TCOD) was from food waste, followed by ratios 0.42 and 3.0 at 69% …

Further Cost Reduction Of Battery Manufacturing, Amir A. Asif, Rajendra Singh

Publications

The demand for batteries for energy storage is growing with the rapid increase in photovoltaics (PV) and wind energy installation as well as electric vehicle (EV), hybrid electric vehicle (HEV) and plug-in hybrid electric vehicle (PHEV). Electrochemical batteries have emerged as the preferred choice for most of the consumer product applications. Cost reduction of batteries will accelerate the growth in all of these sectors. Lithium-ion (Li-ion) and solid-state batteries are showing promise through their downward price and upward performance trends. We may achieve further performance improvement and cost reduction for Li-ion and solid-state batteries through reduction of the variation in …

Data‐Enabled Cognitive Modeling: Validating Student Engineers’ Fuzzy Design‐Based Decision‐Making In A Virtual Design Problem, Golnaz Arastoopour Irgens, Naomi C. Chesler, Jeffrey Linderoth, David Williamson Shaffer

Publications

The ability of future engineering professionals to solve complex real‐world problems depends on their design education and training. Because engineers engage with open‐ended problems in which there are unknown parameters and multiple competing objectives, they engage in fuzzy decision‐making, a method of making decisions that takes into account inherent imprecisions and uncertainties in the real world. In the design‐based decision‐making field, few studies have applied fuzzy decision‐making models to actual decision‐making process data. Thus, in this study, we use datasets on student decision‐making processes to validate approximate fuzzy models of student decision‐making, which we call data‐enabled cognitive modeling. The results …

Cancer Cell Redirection Biomarker Discovery Using A Mutual Information Approach, Kimberly Roche, F. Alex Feltus, Jang Pyo Park, Marie-May Coissieux, Chenyan Chang, Vera B.S. Chan, Mohamed Bentires-Alj, Brian W. Booth

Publications

Introducing tumor-derived cells into normal mammary stem cell niches at a sufficiently high ratio of normal to tumorous cells causes those tumor cells to undergo a change to normal mammary phenotype and yield normal mammary progeny. This phenomenon has been termed cancer cell redirection. We have developed an in vitro model that mimics in vivo redirection of cancer cells by the normal mammary microenvironment. Using the RNA profiling data from this cellular model, we examined high-level characteristics of the normal, redirected, and tumor transcriptomes and found the global expression profiles clearly distinguish the three expression states. To identify potential redirection …

Current Understanding And Future Research Directions At The Onset Of The Next Century Of Sintering Science And Technology, Rajendra K. Bordia, Suk-Joong L. Kang, Eugene A. Olevsky

Publications

Sintering and accompanying microstructural evolution is inarguably the most important step in the processing of ceramics and hard metals. In this process, an ensemble of particles is converted into a coherent object of controlled density and microstructure at an elevated temperature (but below the melting point) due to the thermodynamic tendency of the particle system to decrease its total surface and interfacial energy. Building on a long development history as a major technological process, sintering remains among the most viable methods of fabricating novel ceramics, including high surface area structures, nanopowder-based systems, and tailored structural and functional materials. Developing new …

Do Single-Use Medical Devices Containing Biopolymers Reduce The Environmental Impacts Of Surgical Procedures Compared With Their Plastic Equivalents?, Scott R. Unger, Troy A. Hottle, Shakira R. Hobbs, Cassandra L. Thiel, Nicole Campion, Melissa M. Bilec, Amy E. Landis

Publications

Background: While petroleum-based plastics are extensively used in health care, recent developments in biopolymer manufacturing have created new opportunities for increased integration of biopolymers into medical products, devices and services. This study compared the environmental impacts of single-use disposable devices with increased biopolymer content versus typically manufactured devices in hysterectomy.

Methods: A comparative life cycle assessment of single-use disposable medical products containing plastic(s) versus the same single-use medical devices with biopolymers substituted for plastic(s) at Magee-Women’s Hospital (Magee) in Pittsburgh, PA and the products used in four types of hysterectomies that contained plastics potentially suitable for biopolymer substitution. Magee is …

Assessing The Importance Of The Root Mean Square (Rms) Value Of Different Waveforms To Determine The Strength Of A Dielectrophoresis Trapping Force, Jordan Gilmore, Monsur Islam, Josie Duncan, Rucha Nato, Rodrigo Martinez-Duarte

Publications

No abstract provided.

Assessing The Importance Of The Root Mean Square (Rms) Value Of Different Waveforms To Determine The Strength Of A Dielectrophoresis Trapping Force, Jordon Gilmore, Monsur Islam, Josie Duncan, Rucha Natu, Rodrigo Martinez-Duarte

Publications

No abstract provided.

A Spreadsheet For Estimating Soil Water Characteristic Curves (Swcc), Ghada Ellithy

Publications

SWCC can be measured in the lab; however, due to the cost, time, and high variability in the results, empirical equations were developed using multiple regression approaches on databases consisting of a large number of measured SWCCs. The spreadsheet presented herein utilizes different methods that use basic soil properties, such as grain size distribution and Atterberg limits, to calculate the input parameters for van Genuchten and Fredlund and Xing equations. These parameters are required by numerical models, such as SEEP/W, to perform transient seepage analysis. The spreadsheet allows copying the generated curve data points as well as an input into …

System And Method For Robust Nonlinear Regulation Control Of Unmanned Aerial Vehicles Synthetic Jet Actuators, Vladimir V. Golubev, William Mackunis

Publications

An unmanned aerial vehicle (UAV) is provided with a plurality of synthetic jet actuators and a nonlinear robust controller. The controller compensates for uncertainty in a mathematic model that describes the function of the syn­thetic jet actuators. Compensation is provided by the use of constant feedforward best guess estimates that eliminate the need for more highly computationally burdensome approaches such as the use of time-varying adaptive param­eter estimation algorithms.

General Aviation Hypoxia And Reporting Statistics, Timothy B. Holt, Jacqueline Luedtke, Claire Schindler

Publications

“All too often, pilots tell me they don't need physiological training because they don't fly that high. The statement points out the general feelings of a large majority of the aviation population. I suppose then the burning question is ‘why do we still have aircraft accidents?’” (Boshers, 2015). To this day there are no statistics on how often general aviation pilots experience hypoxia during everyday operations. General aviation pilots (i.e. non-commercial operations) were chosen for this study because:

• Little regulation regarding flight physiology training
• General attitude of invulnerability towards hypoxia
• No requirement to report hypoxia or similar events

High Performance Computing Simulations To Identify Process Parameter Designs For Profitable Titanium Machining, Mathew Kuttolamadom, Joshua Jones, Laine Mears, James Von Oehsen, Thomas Kurfess, John Ziegert

Publications

The objective of this paper was to conduct a study of the multi-level multi-variable design space in titanium machining through high performance computing (HPC) simulations that was otherwise too vast to be explored by physical experiments alone. For tool wear-based performance metrics, this resulted in a validated set of machining parameters for achieving profitable material removal rates (MRR) (optimized cost of processing and tooling) across multiple operational configurations, alloys, tool geometries, and process conditions. The approach was to include all machining-related variables and their distributions available within the software as inputs to finite-element models (FEM) of the machining process. The …

The Future Of Social Media Usage For Scholarly Research, Brent D. Bowen, Jackie Luedtke, Timothy B. Holt, David Ehrensperger, Hunter M. Watson

Publications

The research method for this project – examining the dissemination of research artifacts through social media as well as the impact social media can have on scholarly research – originated with Dr. Brent Bowen of Embry-Riddle Aeronautical University at the Prescott, Arizona campus and Dr. Dean E. Headley of Wichita State University. Drs. Bowen and Headley introduced the Airline Quality Rating (AQR) in early 1991 as an objective method for comparing and scoring airline performance in areas deemed to be important for consumers. Scores are calculated by defining 15-elements in four major areas, focusing on airline performance and the significance …

Attentiveness On Airline Quality As Viewed By The Domestic Consumer, Brent D. Bowen, Erin Bowen, Dean E. Headley, Mary Fink, Madeline S. Kuhn

Publications

This study examines the relationship between the quantitative model of the Airline Quality Rating (AQR), and the qualitative model of the Airline Passenger Survey (APS). Operational performance of the U.S. airline industry has been monitored for the past 27 years by the Airline Quality Rating, and qualitative performance has been monitored for the past 6 years by the Airline Passenger Survey. The AQR provides consumers and aviation industry professionals a means to compare performance quality among U.S. airlines using objective, performancebased data. No other airline study in the country is based on performance measures. The APS was added as a …

The Vulnerabilities Of Hypoxic Events Within General Aviation, Timothy B. Holt, Jacqueline Luedtke, Claire Schindler

Publications

The problem this study addresses is the uncertainty of the common circumstances that general aviation pilots find themselves in that create a hypoxic state, their symptoms of hypoxia, as well as whether or not that pilot deemed the event to put them in an unsafe flight condition. The results of this study showed not only those that were impacted the greatest by hypoxia, but also a caring concern for reporting these events to better flight physiology training. The key elements for this research were:

• Level of pilot experience who have experienced hypoxia
• Reporting statistics
• Symptoms experienced
• Suggestions for bettering flight …

Adopting Unmanned Flight Operations Into Controlled Airspace, Jennah C. Perry, Johnny Young, Jacqueline Luedtke, Benjamin Cook, Holly Hughes, Allison M. Little, Kyle Wilkerson

Publications

Unmanned aircraft activity is becoming more common within the National Airspace System (NAS) and is expected to dominate the NAS in the near future. Specific procedures for adopting unmanned aircraft into the National Airspace System (NAS).

A variation of the Military Grid Reference System was developed and digitally overlaid onto the radar display. To incorporate this grid system, a customized flight plan database was created for the storage of operator submitted flight plans. Instead of verbal communication, a computer chat system is used for communication because of the low altitude operations in the field.

The Federal Aviation Administration (FAA) has …

Cirrus Cloud Microphysics Over Darwin, Australia, Dorothea Ivanova, Matthew Johnson

Publications

Ice clouds, crucial to the understanding of both short - and long - term climate trends, are poorly represented in global climate models (GCMs). Cirrus clouds, one of the largest uncertainties in the global radiation budget, have been inadequately studied at low latitudes. Parameterizations exist for mid - latitude and tropical cirrus ( Ivanova et al. 2001; McFarquhar et al. 1997). Due to climate sensitivity in the GCM with respect to cloud input, without robust parameterizations of cirrus clouds, the GCM is inaccurate over most output fields, including radiative forcing, temperature, albedo, and heat flux (Yao and Del Genio 1999). …

Modelling Methane Production Kinetics Of Complex Poultry Slaughterhouse Wastes Using Sigmoidal Growth Functions, Niamh Power, Aidan Ware

Publications

The kinetic evaluation of the methane potential from poultry slaughterhouse waste streams was performed using modified sigmoidal bacterial growth curve equations (Richards, logistic, Gompertz) in order to investigate their suitability to describe the degradation patterns associated with complex substrates, primarily composed of fats. The methane potential and degradation patterns under mesophilic conditions were assessed using Biochemical Methane Potential (BMP) assays. A nonlinear least-square regression analysis was performed to fit the sigmoidal functions to the cumulative methane production curves with respect to time generated from the BMP assays. In the cases modelled the Gompertz and logistic, three parameter models, sufficiently …

Incorporating Digital Learning Tools In Conjunction With Air Traffic Control Simulation, Jennah Perry, Jacqueline Luedtke, Allison Little, Benjamin Cook, Holly Hughes

Publications

Learning and applying complex information at a fast rate can be challenging for students within an air traffic control - training program. Incorporating digital learning tools into an air traffic control training programs may increase student learning and success rates. Swivl is a digital learning capture tool designed to enhance student learning by allowing students to refer back to their individual classroom lab training session videos via an online portal. Embry Riddle’s air traffic program has started using Swivl in two separate ATC courses in order to determine if it is a viable solution to increase learning.

During our research, …

Integrating Unmanned Aircraft Operations Into The National Airspace System, Benjamin Cook, Holly Hughes, Allison Little, Kyle Wilkerson, Jennah C. Perry, Johnny Young, Jacqueline Luedtke

Publications

Commercial unmanned aircraft systems (UAS) are expected to dominate the National Airspace System (NAS) in the years to come. One particular barrier preventing integration of UAS into the NAS is the lack of standardized procedures for separating aircraft and communicating with ATC. In preparation for adopting unmanned flight operations into a complex control system, it is important to identify solutions to effectively control UAS in the NAS.

The Joint UAS and ATC Team (JUAT) group has designed several simulated ATC scenarios in order to determine effective solutions for integration. Through the use of digitized radar display overlays that replicate the …

Undergraduate Research On General Aviation Hypoxia: A Student's Perspective, Timothy B. Holt, Jacqueline Luedtke, Claire G. Schindler

Publications

The problem this study addresses is the uncertainty of the common circumstances that general aviation pilots find themselves in that create a hypoxic state, as well as whether or not that pilot reported the occurrence to the proper establishments. The results of this study showed not only those that were impacted the greatest by hypoxia, but also a caring concern for reporting these events. The key elements for this research were:

• Level of flying experience that encountered hypoxia

• Reporting statistics

• Reasons for not reporting the event

• Suggestions for bettering flight physiology training

Airline Quality Research: A Student's Perspective, Brent D. Bowen, Erin Bowen, Dean E. Headley, Mary Fink, Madeline S. Kuhn

Publications

This study examines the relationship between the Airline Quality Rating (AQR) and the Airline Passenger Survey (APS) from an undergraduate student’s perspective, as well as how conducting undergraduate research has influenced the student researcher. Operational performance of the U. S. airline industry has been monitored for the past 27 years by a quantitative model of metrics known as the Airline Quality Rating. These metrics include on - time flights, denied boardings, mishandled baggage, and customer complaints. As the nation’s most comprehensive study of airline performance and quality, the National Airline Quality Rating (http : //airlinequalityrating . com) sets an industry …

Utilizing Guided Simulation In Conjunction With Digital Learning Tools In Air Traffic Control Training, Allison Little, Benjamin Cook, Holly Hughes, Kyle Wilkerson, Jacqueline Luedtke, Jennah Perry

Publications

For students in an air traffic control discipline, simulated training time is limited to in - class time and is divided among the entire class. Students are required to advance and obtain knowledge, skills, and abilities in the lab because there is almost no way to practice at home. All students learn at different rates as well as through different learning styles. Swivl is a digital learning/capture tool designed to enhance student learning by allowing students to refer back to the individual classroom lab training session via an online portal.

Swivl is currently being used in two ATC Lab courses. …

A Student's Perspective On The Utilization Of Social Media For Scholarly Research, Brent D. Bowen, Jacqueline Luedtke, Timothy B. Holt, David Ehrensperger, Hunter M. Watson

Publications

The research was conducted on the continuous advancements on the Airline Quality Rating (AQR) developed by Dr . Brent Bowen, and the benefactor of research from a student perspective . The general case study focus of this research is the AQR as it relates to the utilization of social media platforms, and thus having the ability to reach out to a broader worldwide presence . Media metrics consisting of social network platforms, and news releases to assist in broadening the viewership and utilization of research in meeting individuals needs in gaining qualitative and quantified information about the AQR . As …

A Comparison Of Malfunction-Related Accidents For General Aviation Aircraft Manufactured In 1970–1984 And 2000–2014, Douglas Boyd, Jochen Hinkelbein

Publications

The United States general aviation fleet is aging with aircraft manufactured 35–39 years ago representing the most prevalent group. Since older aircraft are more prone to airframe corrosion, fatigue, and brittle electrical wiring, the present study was undertaken to determine whether malfunction-related accidents for general aviation aircraft manufactured between 1970 and 1984 were elevated relative to airplanes produced more recently (2000–2014).

The NTSB aviation accident database was used to identify piston-powered airplane accidents occurring over the 2005–2014 period. Aircraft manufacture year and fleet activity data were from the FAA. Statistical analyses employed contingency tables and Poisson distributions.

The proportion of …

Repository Review: Nasa Pubspace, Laura Pope Robbins

Publications

Laura Pope Robbins is an advisor for The Charleston Advisor, and the review below is included in Scholarly Commons with the permission of the publisher.

PubSpace is a repository of full-text peer-reviewed articles resulting from NASA-funded research going back to 1961. The National Center for Biotechnology Information has integrated PubSpace into PubMed Central, a freely available repository of medical research. Using an established, stable, government-hosted platform for PubSpace seems to make sense. However, the lack of clear branding, an uneven application of phrase searching, and a missing thesaurus of NASA terminology highlights that this integration may not be the best.