Engineering Commons^™

Synthetic Jet Actuator-Based Aircraft Tracking Using A Continuous Robust Nonlinear Control Strategy, N. Ramos-Pedroza, W. Mackunis, M. Reyhanoglu

Publications

A robust nonlinear control law that achieves trajectory tracking control for unmanned aerial vehicles (UAVs) equipped with synthetic jet actuators (SJAs) is presented in this paper. A key challenge in the control design is that the dynamic characteristics of SJAs are nonlinear and contain parametric uncertainty. The challenge resulting from the uncertain SJA actuator parameters is mitigated via innovative algebraic manipulation in the tracking error system derivation along with a robust nonlinear control law employing constant SJA parameter estimates. A key contribution of the paper is a rigorous analysis of the range of SJA actuator parameter uncertainty within which asymptotic …

Highly Vented Truss Wall Honeycomb Structures, David J. Sypeck

Publications

A vented honeycomb structure with a plurality of honey­comb cells arranged in a hierarchical order and having a plurality of truss walls, each truss wall including a plurality of members. The vented honeycomb structure is fabricated by joining a plurality of sheets of trusses using any one of an expansion, a corrugation, and a slotting process. Fabri­cation can also occur by deposition, casting, additive, extru­sion, or aligning and joining methods. The honeycomb cells, truss walls, truss wall openings, and truss wall members can be functionally graded.

Highly Vented Truss Wall Honeycomb Structures, David J. Sypeck

Publications

A vented honeycomb structure with a plurality of honey­comb cells arranged in a hierarchical order and having a plurality of truss walls, each truss wall including a plurality of members. The vented honeycomb structure is fabricated by joining a plurality of sheets of trusses using any one of an expansion, a corrugation, and a slotting process. Fabri­cation can also occur by deposition, casting, additive, extru­sion, or aligning and joining methods. The honeycomb cells, truss walls, truss wall openings, and truss wall members can be functionally graded.

Aerodynamic Analysis Of Low Speed Wing Design Using Taguchi L9 Orthogonal Array, Kenneth Witcher, Ian Mcandrew, Elena Vishnevskaya

Publications

The study of aerodynamics has been preoccupied with understanding flight at increasing speeds and ultimately supersonic. Today, this pursuit has advanced the science for both Hypersonic and Transonic flight to near Mach 1 supporting economical commercial flight operations. This research presents the data from a Taguchi array on low speed with twin wing designs to establish the design parameters for their use in low speed and high altitude. Also presented is how aerodynamic advantages can be achieved through understanding the interactions of parameters and their use. This is compared to operational effectiveness when applied to remotely piloted aircraft that are …

Mapping Of Iva Spacesuit Mobility: Design Observations And Functionality, Gavin C. James, Ryan L. Kobrick, Victor Kitmanyen

Publications

The SUIT Lab at Embry-Riddle Aeronautical University is a joint student-faculty project utilizing multiple high altitude pressure garments to investigate suited crew capabilities within a spacecraft during simulated spaceflight missions. The testing environment within the SUIT lab includes the use of suits in a lowfidelity capsule cabin mockup with a horizontally situated launch-positioned chair simulator. Standard videography and analytical video software are used to determine levels of achievement in ergonomic range of motion and comfort design across multiple spacesuits. Comparative analysis and testing provide data supporting the requirement for the use of particular spacesuits inside proposed commercial launch vehicles. Results …

Human Factors For Small Net Habitable Volume: The Case For A Close-Quarter Space Habitat Analog, Victor Kitmanyen, Timothy J. Disher, Ryan L. Kobrick, Jason P. Kring

Publications

Increasing efforts in sending humans to Mars calls for greater considerations of the ways in which vehicle and habitat design can influence crew performance and behavioral health.

Time Optimal State Feedback Control With Application To A Spacecraft With Cold Gas Propulsion, Samuel J. Kitchen-Mckinley, Sergey V. Drakunov

Publications

A cold gas propulsion system is well suited to provide the required thrust for a small surveyor spacecraft operated near an asteroid or planetary surface. The cold gas propellant can obtained in-situ from local surface or atmospheric constituents. For small spacecraft, the cold gas system may be limited to only on-off control of the main tank where the generated thrust is directly dependent on the tank pressure. As such the thrust will slowly decrease as the propellant is expended. A state feedback, time optimal, control law is developed for a vehicle with propellant is expended. A state feedback, time optimal, …

Six Degrees Of Freedom From Six Degrees Of Separation: The History Of Flight Simulators, David Keck, Morgan Lopez

Publications

Some of today's advanced flight simulators have the capacity to provide pilots with experiences of six degrees of freedom: forward/backward, up/down, or left/right (or pitching, rolling, or yawing in either direction). These incredible devices are the product of over 100 years of design developments that come from a series of technological discoveries and historical events.

Creating An Experimental Learning And Research Driven Spacesuit Lab For Erau, Ryan L. Kobrick, Erik Seedhouse

Publications

This paper evaluates key functional data parameters that must be considered for suborbital spaceflight participants wearing pressurized suits for intravehicular activity (IVA). Data parameters of an analog spacesuit worn in an analog flight environment were obtained from 40 civilian participants using the Suborbital Space Flight Simulator (SSFS) at Embry-Riddle Aeronautical University (ERAU) while donning Final Frontier Design’s (FFD) fully pressurized third-generation spacesuit as part of their training for Project PoSSUM (the Polar Suborbital Science in the Upper Mesosphere Project). The physiological data collected included: blood pressure, electrocardiograms, heart rate, grip strength, and skin temperature. These parameters were measured using a …

Suitability Testing For Possum Scientist-Astronaut Candidates Using The Suborbital Space Flight Simulator With An Iva Spacesuit, Pedro J. Llanos, Victor Kitmanyen, Erik Seedhouse, Ryan L. Kobrick

Publications

This paper evaluates key functional data parameters that must be considered for suborbital spaceflight participants wearing pressurized suits for intravehicular activity (IVA). Data parameters of an analog spacesuit worn in an analog flight environment were obtained from 40 civilian participants using the Suborbital Space Flight Simulator (SSFS) at Embry-Riddle Aeronautical University (ERAU) while donning Final Frontier Design’s (FFD) fully pressurized third-generation spacesuit as part of their training for Project PoSSUM (the Polar Suborbital Science in the Upper Mesosphere Project). The physiological data collected included: blood pressure, electrocardiograms, heart rate, grip strength, and skin temperature. These parameters were measured using a …

Static Testing Of Propulsion Elements For Small Multirotor Unmanned Aerial Vehicles, Robert W. Deters, S.C. Kleinke, Michael S. Selig

Publications

The growing use of small multirotor aircraft has increased the interest in having better performance results especially with the propulsion system. The size of the propellers used on these aircraft operate at low Reynolds numbers that are typically less than 200,000. Static performance testing of ten propeller pairs (tractor and pusher) were completed and is the beginning of a systematic test of propellers used on multirotor systems. The propellers chosen for this initial set of tests were selected from four popular quadrotors. Besides testing the propellers provided with the aircraft, propellers that are sold as replacements from third-party companies were …

System And Method For Robust Nonlinear Regulation Control Of Unmanned Aerial Vehicles Synthetic Jet Actuators, Vladimir V. Golubev, William Mackunis

Publications

An unmanned aerial vehicle (UAV) is provided with a plurality of synthetic jet actuators and a nonlinear robust controller. The controller compensates for uncertainty in a mathematic model that describes the function of the syn­thetic jet actuators. Compensation is provided by the use of constant feedforward best guess estimates that eliminate the need for more highly computationally burdensome approaches such as the use of time-varying adaptive param­eter estimation algorithms.

Adopting Unmanned Flight Operations Into Controlled Airspace, Jennah C. Perry, Johnny Young, Jacqueline Luedtke, Benjamin Cook, Holly Hughes, Allison M. Little, Kyle Wilkerson

Publications

Unmanned aircraft activity is becoming more common within the National Airspace System (NAS) and is expected to dominate the NAS in the near future. Specific procedures for adopting unmanned aircraft into the National Airspace System (NAS).

A variation of the Military Grid Reference System was developed and digitally overlaid onto the radar display. To incorporate this grid system, a customized flight plan database was created for the storage of operator submitted flight plans. Instead of verbal communication, a computer chat system is used for communication because of the low altitude operations in the field.

The Federal Aviation Administration (FAA) has …

Integrating Unmanned Aircraft Operations Into The National Airspace System, Benjamin Cook, Holly Hughes, Allison Little, Kyle Wilkerson, Jennah C. Perry, Johnny Young, Jacqueline Luedtke

Publications

Commercial unmanned aircraft systems (UAS) are expected to dominate the National Airspace System (NAS) in the years to come. One particular barrier preventing integration of UAS into the NAS is the lack of standardized procedures for separating aircraft and communicating with ATC. In preparation for adopting unmanned flight operations into a complex control system, it is important to identify solutions to effectively control UAS in the NAS.

The Joint UAS and ATC Team (JUAT) group has designed several simulated ATC scenarios in order to determine effective solutions for integration. Through the use of digitized radar display overlays that replicate the …

Optimizing Jets For Wake Control Of Ground Vehicles, Domenic Barsotti, Sandra Boetcher

Publications

A system of wake control for a ground vehicle to help promote increased fuel efficiencies of the ground vehicle by modifying an air flow wake generated during the movement of the vehicle in a forward direction. The system includes at least one slot jet configured to be located along a rear profile portion of the ground vehicle. The at least one slot jet is configured to provide a continuous flow of air at a non-zero velocity when the ground vehicle is moving in a forward direction, the non-zero velocity being at least partially directed in a rearward direction with an …

Image And Information Fusion Experiments With A Software-Defined Multi-Spectral Imaging System For Aviation And Marine Sensor Networks, Sam B. Siewert, Matthew Demi Vis, Ryan Claus, Ramnarayan Krishnamurthy, Surjith B. Singh, Akshay K. Singh, Shivasankar Gunasekaran

Publications

The availability of Internet, line-of-sight and satellite identification and surveillance information as well as low-power, low-cost embedded systems-on-a-chip and a wide range of visible to long-wave infrared cameras prompted Embry Riddle Aeronautical University to collaborate with the University of Alaska Arctic Domain Awareness Center (ADAC) in summer 2016 to prototype a camera system we call the SDMSI (Software-Defined Multi-spectral Imager). The concept for the camera system from the start has been to build a sensor node that is drop-in-place for simple roof, marine, pole-mount, or buoy-mounts. After several years of component testing, the integrated SDMSI is now being tested, first …

Multi-Stage Axial Compressor With Counter-Rotation, Vinod Gehlot, Magdy S. Attia, Divyam Garg

Publications

A multi-stage axial compressor incorporating a counter­rotational movement is provided with a series of rotors mounted along and driven by a driveshaft, and a geared counter-rotating outer casing. A planetary gear system is assembled along a static casing, which can be assembled as a forward or aft casing for the compressor. The bearings of the planetary gear system typically will be aligned concen­trically with a center rotor drum assembly mounted along the single driveshaft. The counter-rotating drum assembly will be assembled over the rotor drum assembly and will be engaged by the forward and aft casings so as to provide …

Multi-Site Simultaneous Time-Resolved Photometry With A Low Cost Electro-Optics System, F. Gasdia, Aroh Barjatya, Sergei Bilardi

Publications

Sunlight reflected off of resident space objects can be used as an optical signal for astrometric orbit determination and for deducing geometric information about the object. With the increasing population of small satellites and debris in low Earth orbit, photometry is a powerful tool in operational support of space missions, whether for anomaly resolution or object identification. To accurately determine size, shape, spin rate, status of deployables, or attitude information of an unresolved resident space object, multi-hertz sample rate photometry is required to capture the relatively rapid changes in brightness that these objects can exhibit. OSCOM, which stands for Optical …