Engineering Commons^™

Highly Vented Truss Wall Honeycomb Structures, David J. Sypeck

Publications

A vented honeycomb structure with a plurality of honey­comb cells arranged in a hierarchical order and having a plurality of truss walls, each truss wall including a plurality of members. The vented honeycomb structure is fabricated by joining a plurality of sheets of trusses using any one of an expansion, a corrugation, and a slotting process. Fabri­cation can also occur by deposition, casting, additive, extru­sion, or aligning and joining methods. The honeycomb cells, truss walls, truss wall openings, and truss wall members can be functionally graded.

Increase In The Reduction Potential Of Uranyl Upon Interaction With Graphene Oxide Surfaces, V. N. Bliznyuk, N. Conroy, Y. Xie, R. Podila, A. Rao, Brian A. Powell

Publications

Coordination of uranyl (U(VI)) with carboxylate groups on functionalized graphene oxide (GO) surfaces has been shown to alter the reduction potential of the sorbed uranium ion. A quantitative measure of the reduction potential and qualitative estimation of sorption/desorption processes were conducted using cyclic voltammetry, and the proposed coordination environment was determined using the surface sensitive attenuated total reflection mode of infrared spectroscopy (ATR-FTIR). GO is a nanostructured material possessing a large amount of oxygen-containing functional groups both on basal planes and at the edges, which can form strong surface complexes with radionuclides. The presence of these functional groups on the …

A Decision Support Tool For Building Integrated Renewable Energy Microgrids Connected To A Smart Grid, Damilola A. Asaleye, Michael D. Murphy, Michael Breen

Publications

The objective of this study was to create a tool that will enable renewable energy microgrid (REμG) facility users to make informed decisions on the utilization of electrical power output from a building integrated REμG connected to a smart grid. A decision support tool for renewable energy microgrids (DSTREM) capable of predicting photovoltaic array and wind turbine power outputs was developed. The tool simulated users’ daily electricity consumption costs, avoided CO₂ emissions and incurred monetary income relative to the usage of the building integrated REμG connected to the national electricity smart grid. DSTREM forecasted climate variables, which were used …

A Comparative Study On The Durability Of Geopolymer Mortars Produced With Ground Glass Fiber, Fly Ash, And Glass-Powder In Sodium Sulfate Solution, Hassan Rashidian-Dezfouli, Prasada Rao Rangaraju

Publications

An experimental investigation was conducted to investigate the performance of geopolymers made with three different precursors consisting of fly ash, Ground Glass Fiber (GGF), and Glass-Powder (GLP) exposed to sodium sulfate solution. Precursors were activated using either sodium hydroxide solution or combinations of sodium hydroxide and sodium silicate solution with varying levels of sodium and silica content. Among the mixtures with each of the three precursors, mortar mixtures with the highest compressive strength were selected to test their resistance against exposure to a 5% sodium sulfate solution. Changes in the weight and compressive strength of the specimens were monitored up …

Water Resources Adaptation To Climate And Demand Change In The Potomac River, James H. Stagge, Glenn E. Moglen

Publications

The effects of climate change are increasingly considered in conjunction with changes in water demand and reservoir sedimentation in forecasts of water supply vulnerability. Here, the relative effects of these factors are evaluated for the Washington, DC metropolitan area water supply for the near (2010 to 2039), intermediate (2040-2069), and distant future (2070 to 2099) by repeated water resources model simulations. This system poses water management challenges due to long water delivery travel times that increase uncertainty, multiple water jurisdictions that constrain potential decisions, and future scenarios that simultaneously increase demand and decrease water supply during the critical summer period. …

Real-Time Traffic State Estimation With Connected Vehicles, Sakib Mahmud Khan, Kaken Dey, Mashrur Chowdhury

Publications

A novel framework is developed in this paper, to increase the real-time roadway traffic condition assessment accuracy, which integrates connected vehicle technology (CVT) with artificial intelligence (AI) paradigm forming a CVT-AI method. Traffic density is a major indicator of traffic conditions. In this paper, the traffic operational condition is assessed based on traffic density. A simulated network of Interstate 26 in South Carolina is developed to investigate the effectiveness of the method. The assumption is that the vehicle onboard units will forward the CV generated data to the edge devices (e.g., roadside units) for further processing. CV generated distance headway …

Influence Of Activated Carbon Surface Oxygen Functionality On Elemental Mercury Adsorption From Aqueous Solution, Emily K. Faulconer, David W. Mazyck

Publications

Mercury (Hg), though naturally occurring, is a toxic element. Exposure to various forms of mercury can be harmful for humans and ecosystems. Mercury-contaminated wastewater can be treated using activated carbon to adsorb the mercury, allowing for safe discharge. Wet chemical oxidation of activated carbon was performed to enhanced surface oxygen functionality, with the objective of enhancing aqueous ionic (Hg(II)) and elemental (Hg(0)) mercury adsorption. Characterization of the modified carbons included nitrogen adsorption-desorption, elemental analysis, point of zero charge, and total acidity titration. The concentration and identity of the modifying reagent influenced the characteristics of the carbons, including the surface oxygen …

The Soil Moisture Velocity Equation, Fred L. Ogden, Myron B. Allen, Wencong Lai, Jianting Zhu, Mookwon Seo, Craig C. Douglas, Cary A. Talbot

Publications

Numerical solution of the one-dimensional Richards' equation is the recommended method for coupling groundwater to the atmosphere through the vadose zone in hyperresolution Earth system models, but requires fine spatial discretization, is computationally expensive, and may not converge due to mathematical degeneracy or when sharp wetting fronts occur. We transformed the one-dimensional Richards' equation into a new equation that describes the velocity of moisture content values in an unsaturated soil under the actions of capillarity and gravity. We call this new equation the Soil Moisture Velocity Equation (SMVE). The SMVE consists of two terms: an advection-like term that accounts for …

Enhancing Anaerobic Digestion Of Food Waste Through Biochemical Methane Potential 1 Assays At Different Substrate: Inoculum Ratios, Shakira R. Hobbs, Amy E. Landis, Bruce E. Rittmann, Michelle N. Young, Prathap Parameswaran

Publications

Food waste has a high energy potential that can be converted into useful energy in the form of methane via anaerobic digestion. Biochemical Methane Potential assays (BMPs) were conducted to quantify the impacts on methane production of different ratios of food waste. Anaerobic digester sludge (ADS) was used as the inoculum, and BMPs were performed at food waste:inoculum ratios of 0.42, 1.42, and 3.0 g chemical oxygen demand/g volatile solids (VS). The 1.42 ratio had the highest CH4-COD recovery: 90% of the initial total chemical oxygen demand (TCOD) was from food waste, followed by ratios 0.42 and 3.0 at 69% …

Do Single-Use Medical Devices Containing Biopolymers Reduce The Environmental Impacts Of Surgical Procedures Compared With Their Plastic Equivalents?, Scott R. Unger, Troy A. Hottle, Shakira R. Hobbs, Cassandra L. Thiel, Nicole Campion, Melissa M. Bilec, Amy E. Landis

Publications

Background: While petroleum-based plastics are extensively used in health care, recent developments in biopolymer manufacturing have created new opportunities for increased integration of biopolymers into medical products, devices and services. This study compared the environmental impacts of single-use disposable devices with increased biopolymer content versus typically manufactured devices in hysterectomy.

Methods: A comparative life cycle assessment of single-use disposable medical products containing plastic(s) versus the same single-use medical devices with biopolymers substituted for plastic(s) at Magee-Women’s Hospital (Magee) in Pittsburgh, PA and the products used in four types of hysterectomies that contained plastics potentially suitable for biopolymer substitution. Magee is …

A Spreadsheet For Estimating Soil Water Characteristic Curves (Swcc), Ghada Ellithy

Publications

SWCC can be measured in the lab; however, due to the cost, time, and high variability in the results, empirical equations were developed using multiple regression approaches on databases consisting of a large number of measured SWCCs. The spreadsheet presented herein utilizes different methods that use basic soil properties, such as grain size distribution and Atterberg limits, to calculate the input parameters for van Genuchten and Fredlund and Xing equations. These parameters are required by numerical models, such as SEEP/W, to perform transient seepage analysis. The spreadsheet allows copying the generated curve data points as well as an input into …

Modelling Methane Production Kinetics Of Complex Poultry Slaughterhouse Wastes Using Sigmoidal Growth Functions, Niamh Power, Aidan Ware

Publications

The kinetic evaluation of the methane potential from poultry slaughterhouse waste streams was performed using modified sigmoidal bacterial growth curve equations (Richards, logistic, Gompertz) in order to investigate their suitability to describe the degradation patterns associated with complex substrates, primarily composed of fats. The methane potential and degradation patterns under mesophilic conditions were assessed using Biochemical Methane Potential (BMP) assays. A nonlinear least-square regression analysis was performed to fit the sigmoidal functions to the cumulative methane production curves with respect to time generated from the BMP assays. In the cases modelled the Gompertz and logistic, three parameter models, sufficiently …

Changes In Temporal Variability Of Precipitation Over Land Due To Anthropogenic Forcings, Goutam Konapala, Ashok Mishra, L. Ruby Leung

Publications

This study investigated the anthropogenic influence on the temporal variability of annual precipitation for the period 1950–2005 as simulated by the CMIP5 models. The temporal variability of both annual precipitation amount (PRCPTOT) and intensity (SDII) was first measured using a metric of statistical dispersion called the Gini coefficient. Comparing simulations driven by both anthropogenic and natural forcing (ALL) with simulations of natural forcing only (NAT), we quantified the anthropogenic contributions to the changes in temporal variability at global, continental and sub-continental scales as a relative difference of the respective Gini coefficients of ALL and NAT. Over the period of 1950–2005, …

Analytical Content Vulnerability Assessment Methodology For Earthquake Catastrophe Models, Keivan Rokneddin, Amir Safiey, Mohammad Javanbarg, Vijay Manghnani, Weichiang Pang

Publications

The scarcity of detailed claims data for building contents (Coverage C) from historical earthquake events poses a significant challenge for property insurance catastrophe models to reliably estimate the losses associated to building contents. To develop content vulnerability functions empirically, one would need to have access to data from a multitude of historical events; however, loss disaggregation by coverage is rarely reported even when claims data become available from recent significant events such as Maule (2010) and Tohoku (2011). While damage to the building structure (Coverage A) can be estimated analytically using simulation-based fragility functions to amend sparse historical observations, the …

Development Of Earthquake Vulnerability Functions And Risk Curves For Low And Mid-Rise Hotel Buildings Using A Performance-Based Loss Estimation Framework, Amir Safiey, Weichiang Pang, Mohammad Javanbarg, Keivan Rokneddin, Ershad Ziaei

Publications

The concept of performance-based earthquake engineering has gained significant attentions in both the research and engineering communities. The development of a performance-based seismic loss assessment framework, known as the FEMA P-58 method, allows one to estimate the potential financial losses of a building using performance-based engineering method. This research employs a seismic loss estimation framework derived using the P-58 method to estimate the monetary loss of a mid-rise wood-frame hotel building which is assumed to be located in Napa Valley, California. A 3D structural model representative of the dynamic behavior of the wood-frame hotel was created and subjected to Incremental …

Role Of Ground Glass Fiber As A Pozzolan In Portland Cement Concrete, Hassan Rashidian-Dezfouli, Prasad Rao Rangaraju

Publications

Millions of tons of fiberglass are produced annually for a variety of applications. Because of stringent quality requirements and operational characteristics of the manufacturing plants, a significant quantity of fiberglass that does not meet required specifications of the industry ends up as waste in landfills. This study investigated the use of ground glass fiber (GGF) that had been discarded by plants because it did not meet prescribed standards, as a supplementary cementitious material (SCM) for portland cement. Three replacement levels (10%, 20%, and 30% by mass) for portland cement in paste, mortar, and concrete mixtures were studied. Mechanical and durability …

Supplying Bio-Compressed Natural Gas To The Transport Industry In Ireland: Is The Current Regulatory Framework Facilitating Or Hindering Development?, Niamh Power, Daniel Goulding, Dan Fitzpatrick, Rodger O'Connor, James D. Browne

Publications

Compressed Natural Gas (CNG) and biomethane when blended as a transport fuel (bio-CNG) have significant potential in Europe. However, this alternative fuel has not been developed in several European countries. One of the barriers to market penetration is the absence of a coherent regulatory framework to eliminate the disparity between European and national legislation. Using Ireland as a test case, this paper examines how conflicting policies can be aligned to ensure effective bio-CNG market development. A key barrier is the regulatory ambiguity placed on transport fuel suppliers and investors who wish to connect to the network to supply bio-CNG. For …