Engineering Commons^™

Enhancing Student Veterans' Self-Efficacy And Sense Of Belonging In A Targeted Learning Community: Four Years Of Qualitative Results, Anthony W. Dean, Cynthia Tomovic, Vukica Jovanovic, Kim E. Bullington

Engineering Technology Faculty Publications

Eight semesters of qualitative data, collected over four academic years, are presented from a project that resulted in the development of a student professional learning community of high-achieving, low-income engineering and engineering technology student veterans. In the context of this project, student veterans received academic, professional, and financial support that helped them to be successful in school and to prepare them for a career in the STEM workforce. As adult learners, students in this learning community were a vital part of the curriculum development which resulted in increasing the students’ interest and buy-in. Typically, adult learners have lower levels of …

Efficient Maritime Object Detection And Validation For Enhancing Safety Of Uncrewed Marine Systems, Ahmed Saglam, Yiannis Papelis

VMASC Publications

Safe operation of uncrewed maritime systems is a major concern in the presence of other vehicles or obstacles. Typically, perception algorithms utilize sensor data to identify obstacles that must be avoided, and AI algorithms are used to interpret raw sensor data for use in navigation and object avoidance algorithms. However, perception algorithms are typically computationally expensive. In this paper, we present an efficient method for detecting obstacles using raw lidar data in the form of range or Point Cloud, employing computationally efficient techniques that do not depend on trained models or AI matching. The approach
converts the sensor readings into …

Higher-Order Effects In Biaxial Flexure Of Gfrp I-Section Beams, Zia Razzaq, Faridoon Z. Razzaq

Civil & Environmental Engineering Faculty Publications

A theoretical study of Glass Fiber Reinforced Polymer (GFRP) beams subjected to biaxial bending moments is presented with a focus on the influence of higher-order effects on maximum normal stresses. It is shown that the biaxial bending type of loading causes a dramatic increase in the maximum normal stress for a GFRP beam when induced torsional effects are included. The study demonstrates that the traditional first-order theory can grossly underestimate the maximum normal stress in a GFRP beam. Based on the numerical results presented using a higher-order theory which also accounts for induced warping normal stresses, the maximum normal stress …

An Acute Respiratory Distress Syndrome Drug Development Collaboration Stimulated By The Virginia Drug Discovery Consortium, John S. Lazo, Ruben M.L. Colunga-Biancatelli, Pavel A. Solopov, John D. Catravas

Bioelectrics Publications

The genesis of most older medicinal agents has generally been empirical. During the past one and a half centuries, at least in the Western countries, discovering and developing drugs has been primarily the domain of pharmaceutical companies largely built upon concepts emerging from organic chemistry. Public sector funding for the discovery of new therapeutics has more recently stimulated local, national, and international groups to band together and focus on new human disease targets and novel treatment approaches. This Perspective describes one contemporary example of a newly formed collaboration that was simulated by a regional drug discovery consortium. University of Virginia, …

Editorial: Pulsed Electric Field Based Technologies For Oncology Applications, Siqi Guo, Gregor Sersa, Richard Heller

Bioelectrics Publications

No abstract provided.

An Optimized And Scalable Blockchain-Based Distributed Learning Platform For Consumer Iot, Zhaocheng Wang, Xueying Liu, Xinming Shao, Abdullah Alghamdi, Md. Shirajum Munir, Sujit Biswas

School of Cybersecurity Faculty Publications

Consumer Internet of Things (CIoT) manufacturers seek customer feedback to enhance their products and services, creating a smart ecosystem, like a smart home. Due to security and privacy concerns, blockchain-based federated learning (BCFL) ecosystems can let CIoT manufacturers update their machine learning (ML) models using end-user data. Federated learning (FL) uses privacy-preserving ML techniques to forecast customers' needs and consumption habits, and blockchain replaces the centralized aggregator to safeguard the ecosystem. However, blockchain technology (BCT) struggles with scalability and quick ledger expansion. In BCFL, local model generation and secure aggregation are other issues. This research introduces a novel architecture, emphasizing …

Heart Disease Prediction Using Stacking Model With Balancing Techniques And Dimensionality Reduction, Ayesha Noor, Nadeem Javaid, Nabil Alrajeh, Babar Mansoor, Ali Khaqan, Safdar Hussain Bouk

School of Cybersecurity Faculty Publications

Heart disease is a serious worldwide health issue with wide-reaching effects. Since heart disease is one of the leading causes of mortality worldwide, early detection is crucial. Emerging technologies like Machine Learning (ML) are currently being actively used by the biomedical, healthcare, and health prediction industries. PaRSEL, a new stacking model is proposed in this research, that combines four classifiers, Passive Aggressive Classifier (PAC), Ridge Classifier (RC), Stochastic Gradient Descent Classifier (SGDC), and eXtreme Gradient Boosting (XGBoost), at the base layer, and LogitBoost is deployed for the final predictions at the meta layer. The imbalanced and irrelevant features in the …

Robustembed: Robust Sentence Embeddings Using Self-Supervised Contrastive Pre-Training, Javad Asl, Eduardo Blanco, Daniel Takabi

School of Cybersecurity Faculty Publications

Pre-trained language models (PLMs) have demonstrated their exceptional performance across a wide range of natural language processing tasks. The utilization of PLM-based sentence embeddings enables the generation of contextual representations that capture rich semantic information. However, despite their success with unseen samples, current PLM-based representations suffer from poor robustness in adversarial scenarios. In this paper, we propose RobustEmbed, a self-supervised sentence embedding framework that enhances both generalization and robustness in various text representation tasks and against diverse adversarial attacks. By generating high-risk adversarial perturbations to promote higher invariance in the embedding space and leveraging the perturbation within a novel contrastive …

Underwater Communication Acoustic Transducers: A Technology Review, Laila Shams, Tian-Bing Xu, Zhongqing Su (Ed.), Branko Glisic (Ed.), Maria Pina Limongelli (Ed.)

Mechanical & Aerospace Engineering Faculty Publications

This paper provides a comprehensive review on transducer technologies for underwater communications. The popularly used communication transducers, such as piezoelectric acoustic transducers, electromagnetic acoustic transducers, and acousto-optic devices are reviewed in detail. The reasons that common air communication technologies are invalid die to the differences between the media of air and water are addresses. Because of the abilities to overcome challenges the complexity of marine environments, piezoelectric acoustic transducers are playing the major underwater communication roles for science, surveillance, and Naval missions. The configuration and material properties of piezoelectric transducers effects on signal output power, beamwidth, amplitude, and other properties …

The Impact Of A Multidisciplinary Service-Learning Project On Engineering Knowledge And Professional Skills In Engineering In Engineering And Education Students, Stacie I. Ringleb, Pilar Pazos, Francisco Cima, Isaac Koduah Kumi, Orlando M. Ayala, Krishnanand Kaipa, Jennifer Jill Kidd, Kristie Gutierrez, Min Jung Lee

Mechanical & Aerospace Engineering Faculty Publications

A multidisciplinary service-learning project that involved teaching engineering to fourth and fifth graders was implemented in three sets of engineering and education classes to determine if there was an impact on engineering knowledge and teamwork skills in both the engineering and education students as well as persistence in the engineering students. Collaboration 1 paired a 100-level engineering Information Literacy class in Mechanical and Aerospace Engineering with a 300-level Educational Foundation class. Collaboration 2 combined a 300-level Electromechanical Systems class in Mechanical Engineering with a 400-level Educational Technology class. Collaboration 3 paired a 300-level Fluid Mechanics class in Mechanical Engineering Technology …

Numerical Simulation Of The Donor-Assisted Stir Material For Friction Stir Welding Of Aluminum Alloys And Carbon Steel, Joseph Maniscalco, Abdelmageed A. Elmustafa, Srinivasa Bhukya, Zhenhua Wu

Mechanical & Aerospace Engineering Faculty Publications

In this research effort, we explore the use of a donor material to help heat workpieces without wearing the tool or adding more heat than necessary to the system. The donor material would typically be a small piece (or pieces) of material, presumably of lower strength than the workpiece but with a comparable melting point. The donor, a sandwich material, is positioned between the tool head and the material to be welded, where the tool initially plunges and heats up in the same manner as the parent material that is intended for welding. The donor material heats up subsequent to …

Elastic Properties Of The Non-Mixing Copper Donor Assisted Material In Friction Stir Welding Of Aluminum Alloys Using Nanoindentation, M. Ojha, A. H. Al-Allaq, Y. S. Mohammed, S. N. Bhukya, Z. Wu, A. A. Elmustafa

Mechanical & Aerospace Engineering Faculty Publications

Friction stir welding of high-strength materials such as steels is the impeded by the lack of the vast heat input needed to start the process. Contact friction is considered the most dominant source of heat generation for FSW steels which tends to cause severe wear conditions of the tool hear. To relieve the extreme wear conditions that occur on the tool heads because of FSW steels, we introduce the non-mixing Cu donor stir material to friction stir welding of aluminum alloys. The elastic properties of the Cu donor assisted friction stir welded aluminum alloys are measured using nanoindentation. The hardness …

How Does Working On An Interdisciplinary Service-Learning Project Vs. A Disciplinary Design Project Affect Peer Evaluators' Teamwork Skills, Isaac Koduah Kumi, Stacie I. Ringleb, Orlando M. Ayala, Pilar Pazos, Francisco Cima, Krishnanand Kaipa, Min Jung Lee, Kristie Gutierrez, Jennifer Jill Kidd

Mechanical & Aerospace Engineering Faculty Publications

Over the course of several semesters, two different project-based learning approaches were used in two undergraduate engineering courses–a 100-level introductory course that covered a general education requirement on information literacy and a 300-level fluid mechanics course. One project (treatment) was an interdisciplinary service-learning project, implemented with undergraduate engineering and education students who collaborated to develop and deliver engineering lessons to fourth and fifth-grade students in a field trip model. The other projects (comparison) involved a team-based design project contained within each class. In the 100-level course, students selected their project based on personal interests and followed the engineering design process …

Numerical Study Of The Time-Periodic Electroosmotic Flow Of Viscoelastic Fluid Through A Short Constriction Microchannel, Jianyu Ji, Shizhi Qian, Armani Marie Parker, Xiaoyu Zhang

Mechanical & Aerospace Engineering Faculty Publications

Electroosmotic flow (EOF) is of utmost significance due to its numerous practical uses in controlling flow at micro/nanoscales. In the present study, the time-periodic EOF of a viscoelastic fluid is statistically analyzed using a short 10:1 constriction microfluidic channel joining two reservoirs on either side. The flow is modeled using the Oldroyd-B (OB) model and the Poisson-Boltzmann model. The EOF of a highly concentrated polyacrylamide (PAA) aqueous solution is investigated under the combined effects of an alternating current (AC) electric field and a direct current (DC) electric field. Power-law degradation is visible in the energy spectra of the velocity fluctuations …

Artificial Intelligence-Enabled Exploratory Cyber-Physical Safety Analyzer Framework For Civilian Urban Air Mobility, Md. Shirajum Munir, Sumit Howlader Dipro, Kamrul Hasan, Tariqul Islam, Sachin Shetty

VMASC Publications

Urban air mobility (UAM) has become a potential candidate for civilization for serving smart citizens, such as through delivery, surveillance, and air taxis. However, safety concerns have grown since commercial UAM uses a publicly available communication infrastructure that enhances the risk of jamming and spoofing attacks to steal or crash crafts in UAM. To protect commercial UAM from cyberattacks and theft, this work proposes an artificial intelligence (AI)-enabled exploratory cyber-physical safety analyzer framework. The proposed framework devises supervised learning-based AI schemes such as decision tree, random forests, logistic regression, K-nearest neighbors (KNN), and long short-term memory (LSTM) for predicting and …

Computational Decision Support For Socio-Technical Awareness Of Land-Use Planning Under Complexity—A Dam Resilience Planning Case Study, Andreas Tolk, Jennifer A. Richkus, F. Leron Shults, Wesley J. Wildman

VMASC Publications

Land-use planning for modern societies requires technical competence as well as social competence. We therefore propose an integrative solution enabling better land-use planning and management through better-informed decision-making. We adapt a method developed for cross-disciplinary team building to identify the stakeholders and their various objectives and value systems. We use these results to populate artificial societies embedded into a dynamic data analytics framework as a tool to identify, explore, and visualize the challenges resulting from the different objectives and value systems in land-use planning and management. To prove the feasibility of the proposed solution, we present two use cases from …

Energy-Efficient Multi-Rate Opportunistic Routing In Wireless Mesh Networks, Mohammad Ali Mansouri Khah, Neda Moghim, Nasrin Gholami, Sachin Shetty

VMASC Publications

Opportunistic or anypath routing protocols are focused on improving the performance of traditional routing in wireless mesh networks. They do so by leveraging the broadcast nature of the wireless medium and the spatial diversity of the network. Using a set of neighboring nodes, instead of a single specific node, as the next hop forwarder is a crucial aspect of opportunistic routing protocols, and the selection of the forwarder set plays a vital role in their performance. However, most opportunistic routing protocols consider a single transmission rate and power for the nodes, which limits their potential. To address this limitation, this …

Blockchain And Puf-Based Secure Key Establishment Protocol For Cross-Domain Digital Twins In Industrial Internet Of Things Architecture, Khalid Mahmood, Salman Shamshad, Muhammad Asad Saleem, Rupak Kharel, Ashok Kumar Das, Sachin Shetty, Joel J. P. C. Rodrigues

VMASC Publications

Introduction:: The Industrial Internet of Things (IIoT) is a technology that connects devices to collect data and conduct in-depth analysis to provide value-added services to industries. The integration of the physical and digital domains is crucial for unlocking the full potential of the IIoT, and digital twins can facilitate this integration by providing a virtual representation of real-world entities.

Objectives:: By combining digital twins with the IIoT, industries can simulate, predict, and control physical behaviors, enabling them to achieve broader value and support industry 4.0 and 5.0. Constituents of cooperative IIoT domains tend to interact and collaborate during their complicated …

Thermotrophy Exploratory Study, James Weifu Lee

Chemistry & Biochemistry Faculty Publications

The question of whether environmental heat energy could be utilized as a source of energy for biological metabolism is the center of this exploratory research. In 1979, this author postulated a hypothesis for the existence of thermotrophs that could isothermally utilize environmental heat energy as a source of their energy on Earth. According to this hypothesis, the thermotrophs could be the first primitive forms of life in the early Earth environment. The chemotrophs and phototrophs that we currently are all well familiar with might have been evolved somehow from the primitive thermotrophs. Furthermore, all the organisms currently regarded as the …

Telp Theory: Elucidating The Major Observations Of Rieger Et Al. 2021 In Mitochondria, James Weifu Lee

Chemistry & Biochemistry Faculty Publications

The transmembrane-electrostatically localized protons (TELP) theory may represent a complementary development to Mitchell's chemiosmotic theory. The combination of the two together can now excellently explain the energetics in mitochondria. Our calculated transmembrane-attractive force between an excess proton and an excess hydroxide explains how TELP may stay within a 1-nm thin layer at the liquid-membrane interface. Consequently, any pH sensor (sEcGFP) located at least 2–3 nm away from the membrane surface will not be able to see TELP. This feature as predicted from the TELP model was observed exactly in the experiment of Rieger et al., 2021. In contrast to their …

Modeling The Production Of Microalgal Biomass In Large Water Resource Recovery Facilities And Its Processing Into Various Commodity Bioproducts, James Pierson, Gopi Raju Makkena, Sandeep Kumar, Vinod Kumar, Vivekanand Vivekanand, Hasan Husain, Muhammad Ayser, Venkatesh Balan

Civil & Environmental Engineering Faculty Publications

Algae are capable of sequestering nutrients such as nitrates and phosphates from wastewater in the presence of sunlight and carbon dioxide (CO₂) to build up their body mass and help combat climate change. In the current study, we carried out different case studies to estimate the volume of algal biomass that could be produced annually using the rotating algal biofilm (RAB) method in three large-scale water resource recovery facilities (WRRFs) in Texas: Fort Worth, Dallas, and Houston. We calculated the total amount of lipids, carbohydrates, and proteins that could be fractionated from the algal biomass while using the …

Effects Of Salix Psammophila On Groundwater Recharge In A Semiarid Area Of North China, Lizhu Hou, Jingdong Gao, Bill X. Hu, Xixi Wang

Civil & Environmental Engineering Faculty Publications

Study region: The semiarid Mu Us Sandy Land (MUSL) was selected for this study. It is in the farming-pastoral ecotone of north China and functions as an eco-environmental barrier.

Study focus: Afforestation can mitigate desertification and soil erosion by improving hydrologic condition, which is particularly true for semiarid and arid regions. However, little is known about the quantitative response of hydrologic improvement to afforestation level that can be measured by leaf area index (LAI). The objective was to setup and use a physically-based model to quantitatively assess the dynamics of water fluxes from Salix psammophila afforestation in the MUSL.

New …

A User-Centered Mapping Design For Geomorphological Hazard Thematic Map, Su-Min Shen, Yin-Hsuen Chen, Chia-Ming Lo, Mu-Ti Yu, Si-Chin Lin, Sendo Wang, Chih-Hsin Chang, Sheng-Chi Lin

University Administration Publications

Numerous studies have concentrated on developing user-centered designs for hazard zone maps but rarely for hazard-oriented geomorphological maps, named as Geomorphological Hazard Thematic Maps (GHTMs) in this study, which provide more detailed information about natural hazards. This study developed a user-centered mapping design for GHTMs for nonexperts in geomorphology. We invited civil engineers and high school educators to evaluate a sample GHTM's design in group and focus group panel interviews. The civil engineers preferred maps with more geomorphological features, whereas the educators preferred simple designs. Both groups indicated that the inclusion of essential facilities and road networks is essential. The …

Integrating Shear Flow And Trypsin Treatment To Assess Cell Adhesion Strength, Antra Patel, Bhavana Bhavanam, Trevor Keenan, Venkat Maruthamuthu

Mechanical & Aerospace Engineering Faculty Publications

Cell adhesion is of fundamental importance in cell and tissue organization and for designing cell-laden constructs for tissue engineering. Prior methods to assess cell adhesion strength for strongly adherent cells using hydrodynamic shear flow either involved the use of specialized flow devices to generate high shear stress or used simpler implementations like larger height parallel plate chambers that enable multihour cell culture but generate low wall shear stress and are, hence, more applicable for weakly adherent cells. Here, we propose a shear flow assay for adhesion strength assessment of strongly adherent cells that employs off-the-shelf parallel plate chambers for shear …

Improving Safety Service Patrol Performance, Mecit Cetin, Hong Yang, Kun Xie, Sherif Ishak, Guocong Zhai, Junqing Wang, Giridhar Kattepogu

Civil & Environmental Engineering Faculty Publications

Safety Service Patrols (SSPs) provide motorists with assistance free of charge on most freeways and some key primary roads in Virginia. This research project is focused on developing a tool to help the Virginia Department of Transportation (VDOT) optimize SSP routes and schedules (hereafter called SSP-OPT). The computational tool, SSP-OPT, takes readily available data (e.g., corridor and segment lengths, turnaround points, average annual daily traffic) and outputs potential SSP configurations that meet the desired criteria and produce the best possible performance metrics for a given corridor. At a high level, the main components of the developed tool include capabilities to: …

Development Of A Data Science Curriculum For An Engineering Technology Program, Salih Sarp, Murat Kuzlu, Otilia Popescu, Vukica M. Jovanovic, Zafer Acar

Engineering Technology Faculty Publications

Data science has gained the attention of various industries, educators, parents, and students thinking about their future careers. Statistics departments have traditionally offered data science courses for a long time. The main objective of these courses is to examine the fundamental concepts and theories. However, teaching data science courses has also expanded to other disciplines due to the vast amount of data being collected by numerous modern applications. Also, someone needs to learn how to collect and process data, especially from industrial devices, because of the recent development of Internet of Things (IoT) technologies. Hence, integrating data science into the …

Automating Intersection Marking Data Collection And Condition Assessment At Scale With An Artificial Intelligence-Powered System, Kun Xie, Huiming Sun, Xiaomeng Dong, Hong Yang, Hongkai Yu

Civil & Environmental Engineering Faculty Publications

Intersection markings play a vital role in providing road users with guidance and information. The conditions of intersection markings will be gradually degrading due to vehicular traffic, rain, and/or snowplowing. Degraded markings can confuse drivers, leading to increased risk of traffic crashes. Timely obtaining high-quality information of intersection markings lays a foundation for making informed decisions in safety management and maintenance prioritization. However, current labor-intensive and high-cost data collection practices make it very challenging to gather intersection data on a large scale. This paper develops an automated system to intelligently detect intersection markings and to assess their degradation conditions with …

Preparing Students To Solve Challenges Related To A Changing Climate, Mujde Erten-Unal, Dalya Ismael, Carol L. Considine

Civil & Environmental Engineering Faculty Publications

The National Academy of Engineering has identified restoring and improving urban infrastructure as one of the grand challenges for engineering. Urban coastal communities are particularly at risk as their infrastructure is experiencing frequent inundation related to climate change impacts. Rising sea levels in coastal communities create backflow into stormwater systems and deplete capacity. In addition, the increase in rainfall intensity, duration, and frequency related to climate change create additional challenges for aging infrastructure systems. To prepare students to solve these challenges, the Civil and Environmental Engineering (CEE) and Civil Engineering Technology (CET) programs at Old Dominion University (ODU) are introducing …

Atlas-Based Shared-Boundary Deformable Multi-Surface Models Through Multi-Material And Two-Manifold Dual Contouring, Tanweer Rashid, Sharmin Sultana, Mallar Chakravarty, Michel Albert Audette

Electrical & Computer Engineering Faculty Publications

This paper presents a multi-material dual “contouring” method used to convert a digital 3D voxel-based atlas of basal ganglia to a deformable discrete multi-surface model that supports surgical navigation for an intraoperative MRI-compatible surgical robot, featuring fast intraoperative deformation computation. It is vital that the final surface model maintain shared boundaries where appropriate so that even as the deep-brain model deforms to reflect intraoperative changes encoded in ioMRI, the subthalamic nucleus stays in contact with the substantia nigra, for example, while still providing a significantly sparser representation than the original volumetric atlas consisting of hundreds of millions of voxels. The …

Commentary On Healthcare And Disruptive Innovation, Hilary Finch, Affia Abasi-Amefon, Woosub Jung, Lucas Potter, Xavier-Lewis Palmer

Electrical & Computer Engineering Faculty Publications

Exploits of technology have been an issue in healthcare for many years. Many hospital systems have a problem with “disruptive innovation” when introducing new technology. Disruptive innovation is “an innovation that creates a new market by applying a different set of values, which ultimately overtakes an existing market” (Sensmeier, 2012). Modern healthcare systems are historically slow to accept new technological advancements. This may be because patient-based, provider-based, or industry-wide decisions are tough to implement, giving way to dire consequences. One potential consequence is that healthcare providers may not be able to provide the best possible care to patients. For example, …