Engineering Commons^™

Numerical Study Of The Performance Of A Model Scramjet Engine, Ayad Alhumadi

Mechanical & Aerospace Engineering Theses & Dissertations

A computational parametric investigation was conducted to study the effect of variations to several geometric parameters on the performance of a two-dimensional model scramjet engine (square cross section area for 3-D model). Geometric parameters included backstep location, height, and angle and fuel injector angle, diameter, and location. Two- and three-dimensional geometries have been studied, using a finite-volume computational fluid dynamics (CFD) code (FLUENT) with structured grids with sizes between 50,000 and 90,000 cells for the two-dimensional geometry and with structured hexahedral grid sizes between 650,000 and 949,725 cells for the three-dimensional geometry. Otherwise, identical values of program inputs were utilized …

Evaluating Network Analysis And Agent Based Modeling For Investigating The Stability Of Commercial Air Carrier Schedules, Sheila Ruth Conway

Engineering Management & Systems Engineering Theses & Dissertations

For a number of years, the United States Federal Government has been formulating the Next Generation Air Transportation System plans for National Airspace System improvement. These improvements attempt to address air transportation holistically, but often address individual improvements in one arena such as ground or in-flight equipment.

In fact, air transportation system designers have had only limited success using traditional Operations Research and parametric modeling approaches in their analyses of innovative operations. They need a systemic methodology for modeling of safety-critical infrastructure that is comprehensive, objective, and sufficiently concrete, yet simple enough to be deployed with reasonable investment. The methodology …

An Investigation Into The Relationship Between An Engineering Manager's Purpose-Seeking Beliefs And Behaviors And The Engineering Manager's Perception Of Employee Creativity, Initiative And Purpose-Seeking Behavior, Charles Burton Daniels

Engineering Management & Systems Engineering Theses & Dissertations

Organizations have placed an overwhelming emphasis on extrinsic motivation of its workforce, normally in the form of financial incentives, in an attempt to assure individual and organizational high performance. While a significant level of financial resources is expended in this attempt to predict and influence employee behavior, no objective evidence exists of a favorable return of investment. In fact, the primary impact of most extrinsic motivation might actually be demotivation – the opposite of the intended use.

In this research the prevailing literature was examined and a conclusion about the power of both extrinsic and intrinsic motivation was synthesized to …

A Discrete Event Simulation Of Network Centric Operations: Modeling Unbalanced Combat Configurations In Symmetric Engagements, Mahmoud Turki Khasawneh

Engineering Management & Systems Engineering Theses & Dissertations

Network Centric Operations (NCO) has been dubbed the most significant revolution in military affairs (RMA) in the past 200 years. The promise of NCO is based on the notion that information sharing and connectivity is fundamental to the effectiveness of a combat force. This due to the ability of a properly networked force to self-synchronize itself as it engages enemy forces. The purposeful arrangement of assets in a combat force is what makes it 'properly networked'. What is a purposeful arrangement of combat assets? How should a force organize to enhance information sharing and connectivity? And how does connectivity within …

Multi-Term Approximation To The Boltzmann Transport Equation For Electron Energy Distribution Functions In Nitrogen, Yue Feng

Electrical & Computer Engineering Theses & Dissertations

Plasma is currently a hot topic and it has many significant applications due to its composition of both positively and negatively charged particles. The energy distribution function is important in plasma science since it characterizes the ability of the plasma to affect chemical reactions, affect physical outcomes, and drive various applications. The Boltzmann Transport Equation is an important kinetic equation that provides an accurate basis for characterizing the distribution function—both in energy and space.

This dissertation research proposes a multi-term approximation to solve the Boltzmann Transport Equation by treating the relaxation process using an expansion of the electron distribution function …

Near Earth Asteroid Mission Design For 2000 Sg344, Gökhan Çahşkan

Mechanical & Aerospace Engineering Theses & Dissertations

In this thesis, methodologies and capabilities for mission trajectory design to asteroid 2000 SG344 are investigated. Design of orbital trajectories for interplanetary space flight requires application of principles from orbital mechanics including three dimensional orbital element description, orbit propagation, asteroid ephemerides, targeting logic, relative motion dynamics, and numerical algorithm implementation. The thesis research will attempt to assemble and integrate these various topics to achieve a general capability to conduct asteroid mission trajectory design. Further, appropriate methodology including selection of assumptions and models, computation process and flow, and design metrics and trades to achieve a practical and effective trajectory design process …

Dynamic Scheduling For Unplanned Maintenance Work, Tejaswi Karempudi

Mechanical & Aerospace Engineering Theses & Dissertations

Ships are maintained at regular intervals in a scheduled manner. But there may be unexpected problems which necessitate immediate or as-soon-as-possible attention. These kinds of problem are handled through some type of Unplanned Maintenance Scheduling (UMS).

In a recent paper, Bao, Mittal and Dean I presented a method for planning and scheduling maintenance jobs using lean maintenance principles. In this method, the priority levels of the jobs are initially identified through a Maintenance Priority Evaluation Matrix (MPEM), then conflicts between the jobs because of personnel, tooling and spatial uses are taken into account concurrently to force a re-prioritization of the …

Health Nexus: A Serious Game Prototype For Prevention And Treatment Of Obesity And Diabetes, Joseph C. Miller

Computational Modeling & Simulation Engineering Theses & Dissertations

Electronic games are a prevalent phenomenon of American culture and entertainment. Serious games are video games that take advantage of games' intrinsic entertaining and challenging characteristics for serious purposes, such as education, training, advertisement, and political campaigns. A significant number of serious games have been developed for a variety of diverse purposes. The last few years have witnessed the inception and growth of motion sensing technologies for games, including Nintendo Wii, Sony PlayStation Move, and Microsoft Kinect. These motion sensing technologies usually require game players' physical body movement in order to perform and achieve in the games, such as playing …

A Complete Autonomous Vehicle Solution: An Asv Case Study, Justin Michael Selfridge

Mechanical & Aerospace Engineering Theses & Dissertations

The field of robotics has grown at an astonishing rate over the past two decades, and the interest in autonomous vehicles has grown even faster. Autonomous vehicles offer the unique promise of removing drivers from dangerous environments, and increasing the efficiency of our highways. However, the development of these systems is no trivial task. For an autonomous vehicle to effectively navigate and interact with the world, the vehicle must ( 1) determine where it is located and create an accurate assessment of its surroundings, (2) develop a feasible navigational path based on the current surroundings and the vehicle's destination, and …

Model Verification For Multi-Body Dynamics And Six Degree Of Freedom Machine Impact Testing, Scott James Tedesco

Mechanical & Aerospace Engineering Theses & Dissertations

Using MSC's ADAMS software, a multi-body dynamic model was created to represent a Six Degree of Freedom (Six DOF) Machine, located at the Old Dominion University Dynamic Environment Simulation Laboratory (DES Lab). This rigid body model was verified for single axis impact using experimental test data from the Six DOF Machine. Due to the large number of unknowns in the physical Six DOF Machine, a parameter sensitivity study was conducted to analyze critical parameters. This study provided data regarding machine performance, improved general understanding of the physical and mechanical operation of the Six DOF Machine, and guidance for parameter modeling …

Effect Of Emergent Technologies On Aircraft Fuel Burn By Seat Class, Lee Matthew Watkins

Mechanical & Aerospace Engineering Theses & Dissertations

In this research, a set of advanced technologies collectively referred to as N+2 technologies, are applied to representative aircraft for seven different seat classes. This study will give a better understanding of which technologies will benefit aircraft of differing sizes compared to current studies which have focused on the fuel efficiency benefits of the N+1 technologies for one size of aircraft. Technologies applied consist of hybrid wing body (HWB) platforms, boundary layer ingestion (BLI) engines, weight reducing technologies, hybrid laminar flow control (HLFC) and advanced engine technologies. The aircraft are modeled in Flight Optimization System (FLOPS), a program developed at …

De-Centralized And Centralized Control For Realistic Ems Maglev Systems, Mohamed M. Aly M. Moawad

Mechanical & Aerospace Engineering Theses & Dissertations

A comparative study of de-centralized and centralized controllers when used with real EMS Maglev Systems is introduced. This comparison is divided into two parts. Part I is concerned with numerical simulation and experimental testing on a two ton six-magnet EMS Maglev vehicle. Levitation and lateral control with these controllers individually and when including flux feedback control in combination with these controllers to enhance stability are introduced. The centralized controller is better than the de-centralized one when the system is exposed to a lateral disturbing force such as wind gusts. The flux feedback control when combined with de-centralized or centralized controllers …

Image-Guided Robotic Dental Implantation With Natural-Root-Formed Implants, Xiaoyan Sun

Electrical & Computer Engineering Theses & Dissertations

Dental implantation is now recognized as the standard of the care for tooth replacement. Although many studies show high short term survival rates greater than 95%, long term studies (> 5 years) have shown success rates as low as 41.9%. Reasons affecting the long term success rates might include surgical factors such as limited accuracy of implant placement, lack of spacing controls, and overheating during the placement.

In this dissertation, a comprehensive solution for improving the outcome of current dental implantation is presented, which includes computer-aided preoperative planning for better visualization of patient-specific information and automated robotic site-preparation for superior …

Nonosecond Pulsed Electric Field Induced Changes In Dielectric Properties Of Biological Cells, Jie Zhuang

Electrical & Computer Engineering Theses & Dissertations

Nanosecond pulsed electric field induced biological effects have been a focus of research interests since the new millennium. Promising biomedical applications, e.g. tumor treatment and wound healing, are emerging based on this principle. Although the exact mechanisms behind the nanosecond pulse-cell interactions are not completely understood yet, it is generally believed that charging along the cell membranes (including intracellular membranes) and formation of membrane pores trigger subsequent biological responses, and the number and quality of pores are responsible for the cell fate. The immediate charging response of a biological cell to a nanosecond pulsed electric field exposure relies on the …

Section Abstracts: Astronomy, Mathematics And Physics With Materials Science

Virginia Journal of Science

Abstracts of the Astronomy, Mathematics, and Physics with Material Science Section for the 90th Annual Meeting of the Virginia Academy of Science, May 23-25, 2012, Norfolk State University, Norfolk, Virginia

Future Critical Issues And Problems Facing Technology And Engineering Education In The Commonwealth Of Virginia, Petros Katsioloudis, Johnny J. Moye

STEMPS Faculty Publications

The purpose of this research was to determine the future critical issues and problems facing the K-12 technology and engineering education profession in the Commonwealth of Virginia. This study was based on the Wicklein nationwide studies (1993a, 2005). Even though this study did not exactly replicate the Wicklein studies--since it was limited to the Commonwealth of Virginia--the method and questions used were identical. The modified Delphi research design was used to draw consensus among technology and engineering education experts in the Commonwealth of Virginia. Seventy-five percent of the participants agreed with one another concerning the top five critical problems and …

Laser Processing Of Metals And Polymers, Senthilraja Singaravelu

Physics Theses & Dissertations

A laser offers a unique set of opportunities for precise delivery of high quality coherent energy. This energy can be tailored to alter the properties of material allowing a very flexible adjustment of the interaction that can lead to melting, vaporization, or just surface modification. Nowadays laser systems can be found in nearly all branches of research and industry for numerous applications. Sufficient evidence exists in the literature to suggest that further advancements in the field of laser material processing will rely significantly on the development of new process schemes. As a result they can be applied in various applications …

Molecular Dynamics Studies On Nanoscale Gas Transport, Murat Barisik

Mechanical & Aerospace Engineering Theses & Dissertations

Three-dimensional molecular dynamics (MD) simulations of nanoscale gas flows are studied to reveal surface effects. A smart wall model that drastically reduces the memory requirements of MD simulations for gas flows is introduced. The smart wall molecular dynamics (SWMD) represents three-dimensional FCC walls using only 74 wall Molecules. This structure is kept in the memory and utilized for each gas molecule surface collision. Using SWMD, fluid behavior within nano-scale confinements is studied for argon in dilute gas, dense gas, and liquid states. Equilibrium MD method is employed to resolve the density and stress variations within the static fluid. Normal stress …

A Unified Enterprise-Wide Cost Modeling Framework For Engineering Applications Based On Systems Engineering Principles, Yousuf S. Mohammed

Mechanical & Aerospace Engineering Theses & Dissertations

In the present research the problem of enterprise-wide cost modeling is approached from a systems engineering standpoint. What this does is to use each stage of product life cycle to obtain useful information that helps in estimating the cost of the system. Once a generic framework is developed for estimating the core cost, layers of other factors that affect the cost are applied to the core cost, such as risk and uncertainty, maintainability, supply-chain and socioeconomic conditions. The cost model is expanded to accommodate a product domain ranging from a simple object to a system in the following hierarchy: System, …

Examining Combat Effectiveness In Asymmetric Engagements With Balanced Forces Using The Information Age Combat Model, Nevan E. N. Shearer

Engineering Management & Systems Engineering Theses & Dissertations

With advances in networked communications, the capabilities of command and control (C2) have come to play an increasingly larger role in battlefield success. Within the past two decades a new military strategy has evolved, known as Network-Centric Operations (NCO), which puts information superiority on the frontline. Moreover, the information advantage that is gained through information superiority is translated into a tactical war-fighting advantage.

A research gap has been identified in the investigation of networked combat force configurations in the realm of asymmetric engagements. Specifically, the research question is, how should an information age combat force be networked in order to …

Agile Knowledge Management; A Review, Reconceptualization, And Extension To Military Applications, Dogan Ozturk

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research is to explore the conceptual background of agility in knowledge management, re-conceptualize it and extend it to military applications with a special focus on Counterinsurgency (COIN).

An initial qualitative exploration of agility in knowledge management was performed. Three different concepts and their interrelationships were analyzed: (1) knowledge management, (2) agility in operations, and (3) military organizations in the COIN environment. Findings from this initial qualitative analysis were used to inductively redefine, re-conceptualize and extend the concept of Agile Knowledge Management (AKM), as well as, to compare and adapt the AKM concept to the military environment …

Optimization Framework For A Radio Frequency Gun Based Injector, Alicia S. Hofler

Electrical & Computer Engineering Theses & Dissertations

Linear accelerator based light sources are used to produce coherent x-ray beams with unprecedented peak intensity. In these devices, the key parameters of the photon beam such as brilliance and coherence are directly dependent on the electron beam parameters. This leads to stringent beam quality requirements for the electron beam source. Radio frequency (RF) guns are used in such light sources since they accelerate electrons to relativistic energies over a very short distance, thus minimizing the beam quality degradation due to space charge effects within the particle bunch. Designing such sources including optimization of its beam parameters is a complex …

A Comparative Analysis Of Preferred Learning And Teaching Styles For Engineering, Industrial, And Technology Education Students And Faculty, Petros Katsioloudis, Todd D. Fantz

STEMPS Faculty Publications

No abstract provided.

Spatial Analysis Of Travel Behavior And Response To Traveler Information, Xin Wang

Civil & Environmental Engineering Theses & Dissertations

Transportation planners have long recognized that it is urgent to integrate emerging spatial analysis with travel behavior studies. A clearer understanding of the spatial interactions among travelers and the complex environment they face has the potential to reap benefits of the ongoing technologies of travel behavior, spatial analysis and Advanced Traveler Information Systems (ATIS).

Considering that spatial patterns have been overlooked in the literature of travel behavior and ATIS, the main objective of this research is to use robust methods of spatial analysis to enhance the understanding of how the associations between traveler decisions, built environment and socio-demographic characteristics are …

Dynamics And Control Of Satellite Relative Motion In Proximity Operations, Mohamed Elsayed Aly Abd Elaziz Okasha

Mechanical & Aerospace Engineering Theses & Dissertations

In this dissertation, the development of relative navigation, guidance, and control algorithms of an autonomous space rendezvous and docking system are presented. These algorithms are based on innovative formulations of the relative motion equations that are completely explicit in time. The navigation system uses an extended Kalman filter based on these formulations to estimate the relative position and velocity of the chaser vehicle with respect to the target vehicle and the chaser attitude and gyro biases. This filter uses the range and angle measurements of the target relative to the chaser from a simulated LIDAR system, along with the star …

Electrokinetic Transport Phenomena In Nanofluidic Devices, Mingkan Zhang

Mechanical & Aerospace Engineering Theses & Dissertations

Nanofluidic devices have wide potential applications in biology, chemistry and medicine, and have been proven to be very valuable in sensing biological particles (e.g., DNA and proteins) due to their efficiency, sensitivity and portability. Electrokinetic control of ion, fluid, and particle transport by using only electric field is the most popular method employed in nanofluidic devices. A comprehensive understanding of the electrokinetic ion, fluid, and particle transport in nanofluidics is essential for developing nanofluidic devices for the detection of single molecules, such as the next generation nanopore-based DNA sequencing technology. This research explored numerical simulation of electrokinetic ion and fluid …

An Analysis Of Factors Affecting The Effective Use Of Knowledge Management In Counter Improvised Explosive Device (C-Ied) Operations, Umit Gencer

Engineering Management & Systems Engineering Theses & Dissertations

This dissertation investigates factors that influence effective use of Knowledge Management (KM) in Counter Improvised Explosive Device (C-IED) operations in the military.

The study suggests that effective KM program is determined by the interaction of three organizational capabilities: knowledge infrastructure, knowledge process, and leadership orientation.

A self-administrated survey was conducted on 300 NATO staff officers who have served in C-IED environments. A structural equation modeling technique was used to test a set of hypotheses using 118 completed responses collected from the survey.

The results suggest that out of the 11 constructs within the model; two are rated as 'attribute needs …

Risk Quadruplet: Integrating Assessments Of Threat, Vulnerability, Consequence, And Perception For Homeland Security And Homeland Defense, Kara Norman Hill

Engineering Management & Systems Engineering Theses & Dissertations

Risk for homeland security and homeland defense is often considered to be a function of threat, vulnerability, and consequence. But what is that function? And are we defining and measuring these terms consistently? Threat, vulnerability, and consequence assessments are conducted, often separately, and data from one assessment could be drastically different from that of another due to inconsistent definitions of terms and measurements, differing data collection methods, or varying data sources. It has also long been a challenge to integrate these three disparate assessments to establish an overall picture of risk to a given asset. Further, many agencies conduct these …

Synergistic Effect Of Subnanosecond Pulsed Electric Fields And Temperature On The Viability Of Biological Cells, James Thomas Camp

Electrical & Computer Engineering Theses & Dissertations

Pulsed electric fields have been used to induce a biological response in cells, and at sufficient energy, can cause cell death. By reducing the pulse duration from presently used nanosecond to subnanosecond ranges, the electric field can be delivered to biological tissue non-invasively by the use of an antenna instead of electrodes, such as needles. Studies have previously been completed in which the aim was to determine the energy density (electric field strength, number of pulses) required to induce cell death with 800 ps pulses. Based on this data, it was concluded that for pulse durations of 200 ps, with …

An Efficient Boosted Classifier Tree-Based Feature Point Tracking System For Facial Expression Analysis, Adam Redd Livingston

Electrical & Computer Engineering Theses & Dissertations

The study of facial movement and expression has been a prominent area of research since the early work of Charles Darwin. The Facial Action Coding System (FACS), developed by Paul Ekman, introduced the first universal method of coding and measuring facial movement. Human-Computer Interaction seeks to make human interaction with computer systems more effective, easier, safer, and more seamless. Facial expression recognition can be broken down into three distinctive subsections: Facial Feature Localization, Facial Action Recognition, and Facial Expression Classification. The first and most important stage in any facial expression analysis system is the localization of key facial features. Localization …