Engineering Commons^™

Non-Equilibrium Pressure Control Of The Height Of A Large-Scale, Ground-Coupled, Rotating Fluid Column, R. L. Ash, I. R. Zardadhkan

Mechanical & Aerospace Engineering Faculty Publications

When a ground-coupled, rotating fluid column is modeled incorporating non-equilibrium pressure forces in the Navier-Stokes equations, a new exact solution results. The solution has been obtained in a similar manner to the classical equilibrium solution. Unlike the infinite-height, classical solution, the non-equilibrium pressure solution yields a ground-coupled rotating fluid column of finite height. A viscous, non-equilibrium Rankine vortex velocity distribution, developed previously, was used to demonstrate how the viscous and non-equilibrium pressure gradient forces, arising in the vicinity of the velocity gradient discontinuity that is present in the classical Rankine vortex model, effectively isolate the rotating central fluid column from …

Resilience Governance Through Serious Energy Gaming, Adrian V. Gheorghe, Dan V. Vamanu

Engineering Management & Systems Engineering Faculty Publications

Physical analogies emphasizing cooperative behavior in systems are explored and integrated into so called 'serious energy games', to contribute in a better understanding, monitoring and good governance of some of the complex security issues confronting the evolvement of contemporary energy systems. It is believed that such exercises might be supportive in the necessary attempt, by the many stakeholders and actors / agents involved, to bring balance to prevailing policies of which seems to be “Go change yourself - in a resilient fashion!” An extrapolation of several findings to other than energy systems tempted to implement drastic changes based on substantial …

The Enterprise Aid Methodology: Concepts, Thomas J. Meyers, Patrick T. Hester

Engineering Management & Systems Engineering Faculty Publications

The Enterprise AID − for assessment, improvement, and design − methodology is a systems science-, operational test and evaluation-, and multicriteria decision analysis-based approach to design and deployment of performance measurement systems (PMSs) tailored to specific enterprises pursuing any or all of enterprise assessment, improvement, or design. Its two phases of design and deployment sprang from designers’ inductively generated and now prototyped response to a gap they recognized between performance measurement capabilities required by contemporary enterprises and those offered by contemporary PMSs. This paper illustrates key concepts underlying AID, while a companion document, The Enterprise AID methodology: Application, draws from …

Product Lifecycle Management: Measuring What Is Important - Product Lifecycle Implementation Maturity Model, Abram Walton, Cynthia Tomovic, Michael Grieves

STEMPS Faculty Publications

Industry reports that benefits of PLM are difficult to assess because the same benefit can be expressed as a function of time, cost, quality, or any combination. Based on a review of the PLM literature in an earlier study, a PLM Process Model and an initial list of PLM related metrics was generated and later confirmed through interviews with experienced PLM users. In the current study, the original PLM Process Model was refined and the list of metrics was subjected to an exploratory factor analysis in which specific metrics were found to be related to one of four factors: Inputs, …

Perceptions Of New Doctoral Graduates On The Future Of The Profession, John Ritz, Gene Martin

STEMPS Faculty Publications

Advancement of a profession relies heavily on the participation of its members. Leadership roles must be filled at many levels. To effectively prepare future leaders, efforts must be undertaken to educate and mentor them both about their professions and how to lead within them. The authors sought to identify the perceptions of those who recently earned a doctoral degree with focus on technology and engineering education. In the past, this group developed and assumed major roles in leading their education professions. This study reports on new doctoral graduates’ perceptions related to the focus of content taught in formalized K-12 technology …

Antifragility Analysis And Measurement Framework For Systems Of Systems, John Johnson, Adrian V. Gheorghe

Engineering Management & Systems Engineering Faculty Publications

The twenty-first century is defined by the social and technical hazards we face. A hazardous situation is a condition, or event, that threatens the well-being of people, organizations, societies, environments, and property. The most extreme of the hazards are considered X-Events and are an exogenous source of extreme stress to a system. X-Events can also be the unintended outputs of a system with both positive (serendipitous) and negative (catastrophic) consequences. Systems can vary in their ability to withstand these stress events. This ability exists on a continuum of fragility that ranges from fragile (degrading with stress), to robust (unchanged by …

Impact Of Data Resolution On Peak Hour Factor Estimation For Transportation Decisions, Jan-Mou Li, Lee D. Han, Chung-Hao Chen

Electrical & Computer Engineering Faculty Publications

Inductance loop detection systems serve as a primary data source to contemporary traffic information systems. Measures like 20-second or 30-second average velocity, flow, and lane occupancy can be aggregated from individual loop detector actuation sampled at 60 Hz typically. Practically, these measures would sometimes be further aggregated into a much lower, e.g. 15-minute, resolution and then the raw data were lost. Valuable traffic information like flow variation may be distorted when the lower resolution aggregation is practiced. A biased conclusion could be drawn from a data integration system consisted of this kind of distortions. Three approaches estimating a peak hour …

Brust-Schiffrin Synthesis Of Catalytic Bipodal Pdpt Nanoparticles With Some Mechanistic Insights, Sangbum Han, Vara P. Sheela, Wei Cao, Balasubramanian Ramjee

Applied Research Center Publications

Brust–Schiffrin reduction of Pd and Pt precursors in the presence of resorcinarene amine surfactant led to the formation of substantially Pt rich, PdPt bimetallic nanoparticles of a V-shape or variants on the V-shape. New insights into this reaction are provided on the basis of reversed Brust–Schiffrin syntheses, DLS, UV-vis, and NMR analysis. Based on our experiments we conclude that the resorcinarene amine surfactant is part of the inverse micelle formed from TOABr and it also selectively complexes with the Pd salts prior to their reduction. Remarkably, the composition of the bipodal nanoparticles could be varied substantially by varying the reaction …

Path Clearance For Emergency Vehicles Through The Use Of Vehicle-To-Vehicle Communication, Craig Jordan, Mecit Cetin, R. Michael Robinson

VMASC Publications

The study described in this paper evaluated and tested a new strategy to enable emergency response vehicles (EVs) to navigate through congestion at signalized intersections more efficiently. The proposed strategy involves the use of vehicle-to-vehicle communication to send messages to alert vehicles to the approach of the EV and to provide specific instructions on maneuvering to allow the EV to proceed through congested signalized intersections as quickly as possible. This movement is achieved by creation of a split in the vehicle queue in one lane at a critical location to allow the EV to proceed at its desired speed but …

Real-Time In Vivo Imaging Of Size-Dependent Transport And Toxicity Of Gold Nanoparticles In Zebrafish Embryos Using Single Nanoparticle Plasmonic Spectroscopy, Lauren M. Browning, Tao Huang, Xiao-Hong Nancy Xu

Chemistry & Biochemistry Faculty Publications

Noble metal nanoparticles (NPs) show distinctive plasmonic optical properties and superior photostability, enabling them to serve as photostable multicoloured optical molecular probes and sensors for real-time in vivo imaging. To effectively study biological functions in vivo, it is essential that the NP probes are biocompatible and can be delivered into living organisms non-invasively. In this study, we have synthesized, purified and characterized stable (non-aggregated) gold (Au) NPs (86.2 +/- 10.8 nm). We have developed dark-field single NP plasmonic microscopy and spectroscopy to study their transport into early developing zebrafish embryos (cleavage stage) and their effects on embryonic development …

Unmanned Autonomous Object Retrieval: Old Dominion University 2013 International Aerial Robotics Competition Entry, Johnathan Bailey, Austin Boyd, Chung-Hao Chen, Stephen Dailey, Lisa Henderson, Jeremy Stuart, Christina Williams

Electrical & Computer Engineering Faculty Publications

This paper describes the design implementation of a Quadrotor Unmanned Aerial Vehicle (UAV) with the capability of exploring indoor locations without the assistance of external aids. For relative position, the use of a laser range sensor, an optical flow sensor, and sonar sensor combined allows for the vehicle to generate mapping information. With relative position in mind, the vehicle uses vision algorithms to recognize immediate obstacles, sign, and entry ways to allow for quick movement responses and object recognition. A proportional-integral-differentiator controller allows for flight stability and mitigation in the tight confines of the indoor spaces. A mapping algorithm allows …

The Root Cause Of Failure In Complex It Projects: Complexity Itself, Kaitlynn M. Whitney, Charles B. Daniels

Engineering Management & Systems Engineering Faculty Publications

Increased demand for better technology and perpetual global expansion continue to provide developers with many project opportunities for success, as well as failure. While no industry is immune from project failure, the Information Technology (IT) industry is shown to be more susceptible to risk and failure than those of other industries. Agile project management, which facilitates adaptation to changing circumstances and alleviates rigid formal controls, has become more popular in the software development industry though is not entirely compatible with traditional project management approaches.In this paper we will examine the primary causes of IT project management failure stated in modern …

Managing Diversity In Virtual Teams Through Perspective Taking, Nina C. Magpili, Pilar Pazos

Engineering Management & Systems Engineering Faculty Publications

The emergence of information and communication technologies has provided firms with global access to individual talent often resulting in virtual work teams with diverse sets of skills and perspectives. Diversity in the virtual workplace has been linked to richer and more innovative work solutions. However, diversity in surface attributes (ethnicity, gender, etc.) and deep-level attributes (values, attitudes, etc.) may also lead to conflict and misunderstandings which affect the level of trust and team outcome. A virtual environment further complicates diversity interactions because of reduced levels of awareness, isolation, and uninhibited behaviors. Perspective taking has the potential to help teams deal …

Reference Modelling In Support Of M&S—Foundations And Applications, Andreas Tolk, Saikou Diallo, Jose Padilla, H. Herencia-Zapana

Engineering Management & Systems Engineering Faculty Publications

Whether by design or by practice, systems engineering (SE) processes are used more and more often in Modeling and Simulation (M&S). While the two disciplines are very close, there are some differences that must be taken into account in order to successfully reuse practices from one community to another. In this paper, we introduce the M&S System Development Framework (MS-SDF) that unifies SE and M&S processes. The MS-SDF comprises the SE processes of requirements capture, conceptual modelling, and verification and validation (V&V), and extends them to M&S. We use model theory as a deductive apparatus in order to develop the …

Design And Practical Application Of An Innovative, Pneumatically Latched Valve, Cheng Y. Lin, Jennifer G. Michaeli, Nathan J. Luetke

Engineering Technology Faculty Publications

This article explains the design and fabrication of an innovative five-port, two-position (5/2), pneumatically latched valve. The initial application to repeatedly and automatically lift a mechanical cover or gate was presented as part of an undergraduate student project in the Mechanical Engineering Technology Program's Automation and Controls course in the Department of Engineering Technology at Old Dominion University. Valve operation, including self-latching, utilizes mechanical means only. The valve does not require any electrical power, electronic sensors, or controller, which makes it an energy-saving device. For light-duty operation, a bellows foot-air pump is used for air supply. A single activation of …

Orientation Invariant Ecg-Based Stethoscope Tracking For Heart Auscultation Training On Augmented Standardized Patients, Nahom Kidane, Salim Chemlal, Jiang Li, Frederic D. Mckenzie, Tom Hubbard

Computational Modeling & Simulation Engineering Faculty Publications

Auscultation, the act of listening to the heart and lung sounds, can reveal substantial information about patients’ health and other cardiac-related problems; therefore, competent training can be a key for accurate and reliable diagnosis. Standardized patients (SPs), who are healthy individuals trained to portray real patients, have been extensively used for such training and other medical teaching techniques; however, the range of symptoms and conditions they can simulate remains limited since they are only patient actors. In this work, we describe a novel tracking method for placing virtual symptoms in correct auscultation areas based on recorded ECG signals with various …

Integration Of Multispectral Face Recognition And Multi-Ptz Camera Automated Surveillance For Security Applications, Chung-Hao Chen, Yi Yao, Hong Chang, Andreas Koschan, Mongi Abidi

Electrical & Computer Engineering Faculty Publications

Due to increasing security concerns, a complete security system should consist of two major components, a computer-based face-recognition system and a real-time automated video surveillance system. A computer-based face-recognition system can be used in gate access control for identity authentication. In recent studies, multispectral imaging and fusion of multispectral narrow-band images in the visible spectrum have been employed and proven to enhance the recognition performance over conventional broad-band images, especially when the illumination changes. Thus, we present an automated method that specifies the optimal spectral ranges under the given illumination. Experimental results verify the consistent performance of our algorithm via …

Effect Of Vortex Hotspots On The Radio-Frequency Surface Resistance Of Superconductors, A. Gurevich, G. Ciovati

Physics Faculty Publications

We present detailed experimental and theoretical investigations of hotspots produced by trapped vortex bundles and their effect on the radio-frequency (rf) surface resistance Rs of superconductors at low temperatures. Our measurements of Rs, combined with the temperature mapping and laser scanning of a 2.36-mm-thick Nb plate incorporated into a 3.3-GHz Nb resonator cavity cooled by the superfluid He at 2 K, revealed spatial scales and temperature distributions of hotspots and showed that they can be moved or split by thermal gradients produced by the scanning laser beam. These results, along with the observed hysteretic field dependence of Rs which can …

Shared Leadership In Six Sigma Teams From The North Shore-Lij Health System, Brian J. Galli

Engineering Management & Systems Engineering Theses & Dissertations

The main goal of the research was to identify the relationships that the internal research team environment and external coaching variables had with the degree of shared leadership in the context of Six Sigma teams from the North Shore LIJ Health System. Furthermore, the research ascertained the relationships that these variables had with two performance metrics: a team's ability to complete project deliverables and satisfy customer's requirements. This research also sought to understand additional factors that affected the five variables.

The research found that while shared leadership did not positively change as a team progressed through the phases of the …

Naval Surface Warfare Center Dahlgren Division Engagement Systems (G) Department Development Of A Plan To Maintain, Expand, And Create Corporate Knowledge, Luis J. Rodriguez

Engineering Management & Systems Engineering Theses & Dissertations

This dissertation presents the implementation of an organizational study in a technical organization that provides basic information for proper decision making to establish, continue, nurture, modify, transfer or terminate a Knowledge Management (KM) practice. Different aspects of an organization influence the capability to create and retain knowledge. Understanding the factors and the environment of the KM problem in an organization is essential for a successful plan and execution of knowledge creation, transfer and retention. The study purpose was to describe the contextual situation of the organization in terms of Human, Structural and Relational Capital; identify critical knowledge for the organization …

Thermo-Elasto-Plastic Behavior Of Biaxially Loaded Steel Beam-Columns Inducing Those From World Trade Center Towers, Yanhong Zhao

Civil & Environmental Engineering Theses & Dissertations

An experimental and theoretical investigation into the behavior of biaxially loaded steel beam-columns is conducted including the effects of high temperature. Systems of materially nonlinear differential equations of beam-column equilibrium are first formulated for both ambient and high temperature conditions. An iterative finite integral procedure is formulated and programmed to solve the governing differential equations. To check the validity of the theoretically predicted behavior and strength of the beam-columns, a series of forty-two laboratory tests are conducted at both ambient and high temperature up to 950°F. Upon achieving a good agreement between the predicted beam-column behavior and that observed in …

Employing Learning To Improve The Performance Of Meta-Raps, Fatemah Al-Duoli, Ghaith Rabadi

Engineering Management & Systems Engineering Faculty Publications

In their search for satisfactory solutions to complex combinatorial problems, metaheuristics methods are expected to intelligently explore the solution space. Various forms of memory have been used to achieve this goal and improve the performance of metaheuristics, which warranted the development of the Adaptive Memory Programming (AMP) framework [1]. This paper follows this framework by integrating Machine Learning (ML) concepts into metaheuristics as a way to guide metaheuristics while searching for solutions. The target metaheuristic method is Meta-heuristic for Randomized Priority Search (Meta-RaPS). Similar to most metaheuristics, Meta-RaPS consists of construction and improvement phases. Randomness coupled with a greedy heuristic …

Don't Just Cover The Engineering Design Process, Patent It!, Philip A. Reed

STEMPS Faculty Publications

The article discusses the importance of understanding intellectual property (IP) concept for students of engineering design process. It highlights that IP classification are of four types which includes patent, trademarks and copyright. The article further offers brief information on process of obtaining a utility patent for technological inventions.

Clarifications Of A Datum Axis Or Centerplane Specifying In Maximum Material Condition Of Geometric Dimensioning And Tolerancing, Cheng Y. Lin, Jennifer G. Michaeli, Mileta Tomovic

Engineering Technology Faculty Publications

Engineering and Engineering Technology students and professionals learning the processes and standards in computer-aided design (CAD) and computer-aided manufacturing (CAM) should learn and understand the methodology of geometric dimensioning and tolerancing (GD&T) to describe the intent and requirements for part and assembly geometries. Correct application of GD&T ensures that the part and assembly geometry defined on the drawing will have the desired form and fit (within limits) and function as intended. One learning difficulty in understanding GD&T is the concept of defining a datum axis or center plane using Maximum Material Condition (MMC). To overcome this difficulty, a new approach …

Kinematic And Dynamic Collision Statistics Of Cloud Droplets From High-Resolution Simulations, Bogdan Rosa, Hossein Parishani, Orlando Ayala, Wojciech W. Grabowski, Lian-Ping Wang

Engineering Technology Faculty Publications

We study the dynamic and kinematic collision statistics of cloud droplets for a range of flow Taylor microscale Reynolds numbers (up to 500), using a highly scalable hybrid direct numerical simulation approach. Accurate results of radial relative velocity (RRV) and radial distribution function (RDF) at contact have been obtained by taking advantage of their power-law scaling at short separation distances. Three specific but inter-related questions have been addressed in a systematic manner for geometric collisions of same-size droplets (of radius from 10 to 60 μm) in a typical cloud turbulence (dissipation rate at 400 cm² s^-3. Firstly, …

Web-Based Virtual Learning For Digital Manufacturing Fundamentals For Automotive Workforce Training, Vukica Jovanovic, Nathan W. Hartman

Engineering Technology Faculty Publications

Automotive manufacturers are experiencing difficulties in hiring highly qualified workers with ability to adopt new technologies fast. This kind of ongoing need for training is slowing innovation. This problem is related to the difficulty in obtaining consistent training resources and services especially with lack of training for advanced manufacturing practices for specialised industry sectors. More and more occupations require degrees higher than secondary education because of the global need for so called ‘knowledge workers’. An example of an interactive learning programme, developed with the support of narrated presentation technology, podcasts and online access has been shown in this paper. Sixty …

The Effects Of External Motivation And Real-Time Automated Feedback On Speeding Behavior In A Naturalistic Setting, Ian J. Reagan, James P. Bliss, Ron Van Houten, Bryan W. Hilton

Psychology Faculty Publications

Objective: In this field experiment, the authors tested an alerting system and a monetary incentive system with the objective of reducing speeding more than 5 mph faster than the posted speed limit.

Background: Speeding is a factor in a significant number of traffic fatalities. The systems tested in this project have been evaluated outside but not within the United States. These studies indicated that similar systems led to reductions in speeding.

Method: For this study, eight vehicles were instrumented such that vehicle speed and speed limits were linked in real time. A total of 50 participants drove assigned vehicles for …

Review Of Us And Eu Initiatives Toward Development, Demonstration, And Commercialization Of Lignocellulosic Biofuels, Venkatesh Balan, David Chiaramonti, Sandeep Kumar

Civil & Environmental Engineering Faculty Publications

Advanced biofuels produced from lignocellulosic biomass offer an exciting opportunity to produce renewable liquid transportation fuels, biochemicals, and electricity from locally available agriculture and forest residues. The growing interest in biofuels from lignocellulosic feedstock in the United States (US) and the European Union (EU) can provide a path forward toward replacing petroleum-based fuels with sustainable biofuels which have the potential to lower greenhouse gas (GHG) emissions. The selection of biomass conversion technologies along with feedstock development plays a crucial role in the commercialization of next-generation biofuels. There has been synergy and, even with similar basic process routes, diversity in the …

Tpm: Cloud-Based Tele Ptsd Monitor Using Multi-Dimensional Information, Roger Xu, Gang Mei, Guangfan Zhang, Pan Gao, Aaron Pepe, Jiang Li, James D. Westwood (Ed.), Susan W. Westwood (Ed.), Li Felländer-Tsai (Ed.), Randy S. Haluck (Ed.), Richard A. Robb (Ed.), Steven Senger (Ed.), Kirby G. Vosburgh (Ed.)

Electrical & Computer Engineering Faculty Publications

An automated system that can remotely and non-intrusively screen individuals at high risk for Post-Traumatic Stress Disorder (PTSD) and monitor their progress during treatment would be desired by many Veterans Affairs (VAs) as well as other PTSD treatment and research organizations. In this paper, we present an automated, cloud-based Tele-PTSD Monitor (TPM) system based on the fusion of multiple sources of information. The TPM system can be hosted in a cloud environment and accessed through landline or cell phones, or on the Internet through a web portal or mobile application (app).

Hyperspectral Image Classification Using A Spectral-Spatial Sparse Coding Model, Ender Oguslu, Guoqing Zhou, Jiang Li, Lorenzo Bruzzone (Ed.)

Electrical & Computer Engineering Faculty Publications

We present a sparse coding based spectral-spatial classification model for hyperspectral image (HSI) datasets. The proposed method consists of an efficient sparse coding method in which the l₁/l_q regularized multi-class logistic regression technique was utilized to achieve a compact representation of hyperspectral image pixels for land cover classification. We applied the proposed algorithm to a HSI dataset collected at the Kennedy Space Center and compared our algorithm to a recently proposed method, Gaussian process maximum likelihood (GP-ML) classifier. Experimental results show that the proposed method can achieve significantly better performances than the GP-ML classifier when training data …