Engineering Commons^™

Old Dominion University's Engineering Summer Camp's Effect On Students Interest In Engineering, Clair Dorsey

OTS Master's Level Projects & Papers

The problem of this study was to determine parents' perceptions of their child's experience in Old Dominion University's engineering summer camps to determine if their child generated an interest in engineering as a career choice.

Parallel Implementations Of The Frank-Wolfe Algorithms For The Traffic Assignment Problem, Shawn Eugene Allen

Computational Modeling & Simulation Engineering Theses & Dissertations

Transportation planners seek to understand how to best invest limited resources for future transportation network development. The traffic assignment problem is one algorithm of great importance to planners because it provides insight into how traffic will flow within the network. The Frank-Wolfe algorithm is a traditional solution method for this optimization problem, but it has been characterized by its slow rate of convergence and poor computational performance. This thesis examines and implements several modern advancements in this algorithm which are designed to improve the rate of convergence.

In addition to algorithm changes, another method to improve the performance of an …

Using Real Property Layouts To Study The Foreclosure Contagion Effect In Real Estate With Agent-Based Modeling And Simulation, Daniele Vernon-Bido

Computational Modeling & Simulation Engineering Theses & Dissertations

Foreclosures in the United States increased sharply from 2007 to 2009. These foreclosures had a spillover effect on neighboring property values causing additional foreclosures. This is known as the foreclosure contagion effect.

Recent studies have quantified the discount attributed to foreclosure contagion using equation-based techniques. However, the discount varied between studies and markets. Further studies using agent-based modeling and simulation have demonstrated the relationship between the discounts, the time a foreclosure remains on the market, the prevailing interest rates and the average property values.

This study uses agent-based modeling and simulation (ABMS) to explore the differences that varying neighborhood densities …

Probabilistic Modeling Of Erroneous Human Response To In-Vehicle Route Guidance Systems: A Domain Decomposition-Based Algorithm, Abdullah Al Farooq

Computational Modeling & Simulation Engineering Theses & Dissertations

Drivers are generally assumed to follow the shortest route to their destinations prescribed by in-vehicle route navigation systems without mistake. However, it is not uncommon that drivers make mistakes when there are complex intersections along the route to miss turns. Such mistakes would result in following a longer route than the optimal one. In this thesis, research has been conducted to analyze the effects of the number of intersections in the shortest routes of different O-D (origin-destination) pairs. While different formulations can be employed to describe such "driving with error" model, a Domain Decomposition (DD) partitioning algorithm has been developed …

Optimization Of Demon® Sidestream Treatment And Potential For Anammox Mainstream Bioaugmentation, Andrea Lauren Nifong

Civil & Environmental Engineering Theses & Dissertations

Anaerobically digested sludge dewatering liquors (e.g. centrate) can represent 15-25% of the total kjeldahl nitrogen (TKN) load on a typical municipal waste water treatment plant (WWTP). Sidestream nitrogen removal has been demonstrated to be an effective tool for improving nitrogen removal performance and reliability with a savings in aeration energy, chemicals (supplemental alkalinity and carbon), and sludge production.

Deammonification, partial nitritation by ammonia oxidizing bacteria (AOB) combined with anaerobic ammonium oxidation (AMX or anammox), provides near complete nitrogen removal with a 65% reduction in energy and 100% reduction in supplemental carbon and alkalinity requirements as compared to traditional nitrification-denitrification. The …

Micro-Scale Dielectric Spectroscopy Of Biological Cells, Arindam Ghosh

Mechanical & Aerospace Engineering Theses & Dissertations

In recent years microfluidics has become one of the most commonly used tools to investigate cellular biology and to provide a platform for novel biomedical devices. Electrical Impedance Spectroscopy (EIS) was formulated as a non-invasive and label-fi.ee method to investigate the dielectric and the structural properties of materials. Since the early 20th century, EIS and Dielectric Spectroscopy have been applied to measure the dielectric properties of biological cells and tissues. Information about the cell membrane, cytoplasm and the nucleus can be extracted by dielectric spectroscopy. This thesis focuses on the applicability of the analytical models, in particular the Maxwell-Wagner Interfacial …

Design And Implementation Of Software For Technological Forecasting And Modeling Technological Obsolescence, Gershom Kwaku Obeng

Mechanical & Aerospace Engineering Theses & Dissertations

In a world that is highly infused with technology, it is important that an organization knows how many resources such as manpower, equipment, and funding are needed at what time so that the organization does not suffer unnecessary risks. It is also important to know when to replace equipment. After examining different methods of forecasting, it was determined that manipulation of growth curves was the best way to determine the likelihood of device failure at a specific time. An approach in engineering economics was used to estimate the cost due to the failure of various devices or groups of devices. …

Identifiability Of Additive, Time-Varying Actuator And Sensor Faults By State Augmentation, Jason M. Upchurch

Electrical & Computer Engineering Theses & Dissertations

Faults in dynamical systems can have serious safety and reliability implications. For example, actuator and sensor faults have been factors in past incidents and mishaps in many aerospace systems. A large body of research is devoted to developing methods to detect and identify actuator and sensor faults in such systems.

One fault detection and identification menthol employs state augmentation, whereby a set of time-varying faults of interest are modeled as outputs of exogenous linear, time-invariant systems and augmented to the state of the nominal system model. The resulting model represents the system dynamics due to a particular actuator-sensor fault configuration. …

Correlational Study Of Open Circuit Resonant (Sansec) Sensor’S Electric Field Distribution On Lightning Attachment, Kayla M. Farrow, Linda L. Vahala

Electrical & Computer Engineering Faculty Publications

NASA Langley Research Center (LaRC) is conducting research to develop an open circuit SansEC (Sans Electric Connection) sensor to provide lightning strike protection (LSP) in conjunction with damage detection and diagnosis for composite aircraft. SansEC sensors are simplistic devices consisting of an open circuit conductive trace shaped in a planar geometric spiral. The length and width of the conductive trace as well as the gap separation between adjacent turns determines the inductance, resistance and capacitance of the LRC circuit and its associated resonant response. When the sensor is placed on a composite substrate, the electric impedance of the substrate is …

Attitudes Of Virginia Technology Education Teachers Toward The Effectiveness Of Their Curriculum, Glenn Patton

OTS Master's Level Projects & Papers

The problem of this study was to determine Virginia technology education teachers' attitudes regarding the effectiveness of their curriculum and resources.

A Sociotechnical Systems-Based Process To Facilitate The Development Of A Change Intervention Deployment Plan, Jorge Luis Nadal

EMSE Doctoral Projects

The purpose of this project was to formulate a process to facilitate the development of an effective change intervention deployment plan. The premise is that without a proper deployment plan, the successful implementation of a change intervention in an organization will be slow and require multiple revisions. This research utilized a Sociotechnical Systems (STS) approach to analyze the implementation of a major change intervention.

This research was in part prompted by a request by management of the U.S. Army Corps of Engineers (USACE) for the researcher to examine why it has taken so long to successfully implement this large-scale change …

Use Of A Rolling Road System In Crosswind Conditions, Mau-Kuo Chen

Mechanical & Aerospace Engineering Theses & Dissertations

Wind tunnel testing continues to play an important role in vehicle aerodynamic development. Accurate results are strongly associated with whether the wind tunnel can closely simulate the on-road conditions, including the Reynolds number and all boundary conditions. Rolling road systems (or moving belts) have been a successful tool for many auto makers and racing teams to simulate the relative motion between the stationary vehicle model and the floor in the test section. The mechanism of the rolling road system is simple, but how it affects the adjacent flow field and how this flow interacts with the flow underneath the vehicle …

Subtalar Joint Instability: Diagnosis And Conservative Treatment, Julie Choisne

Mechanical & Aerospace Engineering Theses & Dissertations

Subtalar instability may be caused by various ligamentous injuries. Combined instability at the ankle and subtalar joint is not adequately diagnosed. Further, isolated subtalar instability is usually misdiagnosed which may lead to long term damage to the joint. Developing a non-invasive and clinically practical tool to diagnose subtalar joint instability would be an important asset. The ability of an ankle brace, a common treatment for hindfoot instability, to promote stability for the subtalar joint was not well established. The purposes of this study were to 1) assess the kinematics of the subtalar, ankle, and hindfoot in the presence of isolated …

Approximate Algorithms For The Combined Arrival-Departure Aircraft Sequencing And Reactive Scheduling Problems On Multiple Runways, Gulsah Hancerliogullari

Engineering Management & Systems Engineering Theses & Dissertations

The problem addressed in this dissertation is the Aircraft Sequencing Problem (ASP) in which a schedule must be developed to determine the assignment of each aircraft to a runway, the appropriate sequence of aircraft on each runway, and their departing or landing times. The dissertation examines the ASP over multiple runways, under mixed mode operations with the objective of minimizing the total weighted tardiness of aircraft landings and departures simultaneously. To prevent the dangers associated with wake-vortex effects, separation times enforced by Aviation Administrations (e.g., FAA) are considered, adding another level of complexity given that such times are sequence-dependent. Due …

Improving The Stability Of High And Low Bandgap Polymers Organic Photovoltaic Devices Using A Solution Based Titanium Sub-Oxide Interfacial Layer, Kurniawan Foe

Electrical & Computer Engineering Theses & Dissertations

The improvement in device efficiency has brought organic photovoltaic (OPV) devices closer to commercial viability, highlighting the importance of studying the lifetime and stability of OPV devices. At present, the lifetime and stability of OPV devices is much shorter and poor mainly caused by oxygen, moisture, and light resulting in the oxidation on low work function electrodes and the degradation of the morphology of the photoactive layer. To improve the lifetime and stability of the OPV devices, we used newly developed low bandgap polymer, PCDTBT, as the electron acceptor material and a solution based titanium sub-oxide (TiOx) interfacial layer inserted …

Improving The Efficiency Of P3ht:Icba Organic Solar Cells By Modifying The Photoactive Solution Preparation Step, Matthew Blaine Samson

Electrical & Computer Engineering Theses & Dissertations

Organic solar cells (OSCs) are a promising alternative to conventional silicon solar cells. These organic devices offer the promise of facile low cost large scale solution based processing on lightweight, flexible, plastic substrates. At the present state of the technology, however, OSCs exhibit relatively low power conversion efficiencies. To improve these efficiencies, new materials are constantly being developed.

One such material is the fullerene indene-C₆₀ bisadduct (ICBA). When implemented in a poly(3-hexylthiophene-2, 5-diyl) (P3HT) : ICBA bulk heterojunction solar cell, these devices exhibit open circuit voltages exceeding 0.8 V, a value much higher than the devices made implementing phenyl-C …

Control Design And Implementation For An Autonomous Surface Vehicle Using Azimuth Thrusters, Stanton James Coffey

Mechanical & Aerospace Engineering Theses & Dissertations

Autonomous Surface Vehicle research for water applications is inspired by a technological push to create more automated robotics that can perform functions too menial for a human to spend time on as well as too complex, difficult, or dangerous for a person to perform. The development objective is to construct, program, and test an autonomous surface vehicle that can perform precision hold maneuvers independent of human control. This capability would be useful in many situations where it is desirable to freeze the current position of the boat in order to perform some duty task. To conduct the research for this …

Design Advantages Of Skin Friction Drag Reduction Using Riblets, John Michael Gregory

Mechanical & Aerospace Engineering Theses & Dissertations

The research reported here has examined the potential improvements in overall aircraft performance that can result from integrating skin friction reduction technology, such as riblets, early in the aircraft design cycle. This study has shown that riblets can improve the payload capacity, increase the range, and improve performance of transport aircraft. If recent advances in fabrication techniques make it possible to create aluminum wing surfaces with integral riblet geometries, the applications could be widespread and the gains significant.

Conceptual Design Of A Reusable Mars Aircraft, Bryce L. Horvath

Mechanical & Aerospace Engineering Theses & Dissertations

This study assumes that the launch vehicles and precision Mars entry descent and landing systems, required for eventual crewed missions to the surface, have been developed, motivating the rapid build-up of a fixed surface base to enable extended human stays. During the time interval between the first successful placement of a heavy (between 20 and 80 metric ton) payload and completion of the baseline human-rated Mars outpost, it will be possible to utilize this large payload delivery capability to accelerate robotic exploration of the surface from the fixed base location.

One element of such an expanded robotic exploration program will …

Linear Programming Algorithm With Mixed Real-Integer Variables In Matlab Environments, Gelareh Bakhtyar

Civil & Environmental Engineering Theses & Dissertations

Efficient numerical procedures for solving general Linear Programming (LP) problems with mixed real-integer variables are developed in this work. The proposed algorithms employ the revised dual simplex with Branch and Bound (B&B) algorithms, with special procedures for limited search of subsequent branches. Computational time can be significantly reduced by incorporating the updated inverse formulas into the developed procedures. Both generic LP problems and deterministic pavement maintenance and rehabilitation (M&R) problems are used in this study to vaiidate the developed procedures. Medium to large-scale examples ( 11 pavement M&R) presented in this work have demonstrated that the developed numerical procedures consistently …

Complementarities Of Probabilistic And Evidence Approaches: An Uncertainty Assessment For Selection Of Composite Material, Stella B. Bondi, Resit Unal, Patrick T. Hester, Trina M. Chytka

Engineering Technology Faculty Publications

A complimentary probabilistic and evidence theory approach is utilized to enhance uncertainty assessments in the area of critical safety characteristics for conceptual design. This research provides additional exploration into the failure modes necessary to utilize Fiber Reinforced Polymer (FRP) and various composites to their fullest potential and to minimize uncertainty by comparing probability and evidence theories. This combined approach has been applied to a selection of composite material that could provide uncertainty assessment design for a space transportation system. Uncertainty estimates presented are bounded by belief and plausibility functions. The results may provide additional information to the decision makers in …

Preliminary Development Of A Subject Specific Finite Element Model Of The Hindfoot, Liang Dong

Mechanical & Aerospace Engineering Theses & Dissertations

The human hindfoot is a complex structure and its medical treatment can vary from patient to patient. If physicians have access to a patient specific computer model, the optimal treatment option can be explored on the model before preforming it on the patient. The purpose of this study was to create a quasi-static finite element model and to show the stress contour in the cartilage between the bones. Ankle joint contact pressure was collected on one cadaver limb with a 40 lbs ( 178 N) axial load applied and tendon loads applied to simulate the ratio of tendon loading during …

New Types Of Morpho-Physiological Changes In Cells Exposed To Nanosecond Pulsed Electric Field, Mikhail A. Rassokhin

Theses and Dissertations in Biomedical Sciences

Exposure of cells to a pulsed electric field (PEF) is the basis of multiple techniques and treatments. Nanosecond pulsed electric field (nsPEF) poses unique characteristics to induce subtle cellular effects while preserving cell integrity. Improving understanding of the mechanisms triggered by nsPEF in cells inspires new applications for the nanosecond pulse technology. Although many effects of nsPEF remain unknown, they can be inferred from morpho-physiologic changes, or cell reshaping, that accompany nsPEF exposure. During the exposure cells undergo reshaping that is manifested in swelling and diffuse blebbing. Recently we identified two new distinct forms of reshaping, pseudopod-like blebbing and microvesiculation, …

The Rq-Tech Methodology: A New Paradigm For Conceptualizing Strategic Enterprise Architectures, Christine Ann Hoyland

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research is to develop and apply a system-theoretic based methodology and corresponding model for Enterprise Architecture development. Enterprise Architectures can assist managers by illustrating the systemic relationships within an organization and the impact changes to the organization could make. Unfortunately, today's modeling practices are proprietary, time-consuming, and generally ineffective as tools for understanding the consequences of strategic-level planning decisions across all levels of the enterprise. This research supports the conclusion that system-specific solutions produce islands of technology and can be prevented by employing better enterprise change planning.

This research combined the practice of Enterprise Architectures with …

Micro To Macro Dynamics Of Shared Awareness Emergence In Situations Theory: Towards A General Theory Of Shared Awareness, Samuel F. Kavacic

Engineering Management & Systems Engineering Theses & Dissertations

Engineering Management is an interdisciplinary field of study. As such, Engineering Management must rely on the energies of its participants to integrate toward the problem being solved. Many techniques exist to aid the researcher towards a common goal; however, it can only be surmised on how effective the techniques have been. Not until the activity is over and the participants reflect back on their results can they know whether they shared a common understanding of the problem. This study explores the emergence of shared awareness based the interactions of disparate perspectives at a particulate level. The study builds from observations …

Field Emission Studies Toward Improving The Performance Of Dc High Voltage Photoelectron Guns, Mahzad Bastaninejad

Mechanical & Aerospace Engineering Theses & Dissertations

Field emission is the main mechanism that prevents DC high voltage photoemission electron guns from operating at the very high bias voltages required to produce low emittance beams. Gas conditioning is shown to eliminate field emission from cathode electrodes used inside DC high voltage photoelectron guns. Measurements and simulation results indicate that gas conditioning eliminates field emission from cathode electrodes via two mechanisms: sputtering and implantation, with the benefits of implantation reversed by heating the electrode. The field emission characteristics of 5 stainless steel electrodes varied significantly upon the initial application of voltage but improved to nearly the same level …

Protein Loop Length Estimation From Medium Resolution Cryoem Images, Andrew R. Mcknight

Computer Science Theses & Dissertations

In the post-genomic era, proteomics research presents a new frontier in life science. Proteins play roles in virtually every biological process, and understanding their atomic structures is the key to unraveling how they carry out their work. Compared to the over half million protein sequences in UniProt, only around 25,000 unique sequences have been atomically modeled and deposited to PDB (Protein Databank). Cryoelectron Microscopy (cryoEM) is an important biophysical technique that produces 3D subnanometer resolution images of molecules not amenable to past approaches like x-ray crystallography or nuclear magnetic resonance. De novo modeling is becoming a promising approach to derive …

Static And Vibration Analyses, And Sensitivity Analysis Of Stepped Beams Using Singularity Functions, Carla Rocio Davila

Mechanical & Aerospace Engineering Theses & Dissertations

This thesis intends to prove that singularity functions can be used to perform static and vibration analyses and their sensitivity analysis of stepped beams subjected to various support constraints. Specifically, this thesis develops formulations using singularity functions for static and vibration analyses of a simply-supported, a roller­ supported, and a spring-supported stepped beam. The Static and Vibration Sensitivity Analysis formulations are derived for the simply-supported beam to show the feasibility of this approach. The techniques presented in this thesis can be extended to various other supports constraints such as a middle support, and spring support or any other variation of …

Development And Assessment Of An In-Situ Load System, Kenneth Toro

Mechanical & Aerospace Engineering Theses & Dissertations

The In-situ Load System (ILS) was designed at NASA Langley Research Center (LaRC) to perform multi-component check loads on a force balance at a test facility. The ILS is designed to allow a force balance to be placed at off nominal orientations, while maintaining an applied load in the gravitational direction. This allows for multicomponent loads to be applied to a balance as a function of balance orientation and ILS configuration. The system is designed to be used in conjunction with a facilities existing pitch and roll control systems.

The ILS was modified to provide higher load ranges than those …

Http Mailbox - Asynchronous Restful Communication, Sawood Alam

Computer Science Theses & Dissertations

Traditionally, general web services used only the GET and POST methods of HTTP while several other HTTP methods like PUT, PATCH, and DELETE were rarely utilized. Additionally, the Web was mainly navigated by humans using web browsers and clicking on hyperlinks or submitting HTML forms. Clicking on a link is always a GET request while HTML forms only allow GET and POST methods. Recently, several web frameworks/libraries have started supporting RESTful web services through APIs. To support HTTP methods other than GET and POST in browsers, these frameworks have used hidden HTML form fields as a workaround to convey the …