Engineering Commons^™

Ev Charging And V2g Operation For Distribution System Vpp Including Model Predictive Control, Rosemary E. Alden, Simone Silvestri, Malcolm D. Mcculloch, Dan M. Ionel

Electrical and Computer Engineering Faculty Publications

Future smart grid virtual power plants (VPPs) are considered for development based on industry communication standards for electric vehicle (EV) chargers such as Open Charge Point Protocol (OCPP), IEC 15118, and IEC 61851. To support research and development of computationally intelligent controls for distributed EV batteries, a python-based API OpenDSS VPP framework is utilized with thousands of experimental smart meter profiles, the IEEE 123 node test feeder, and hundreds of national survey-based EV modules for conventional and optimal charging and vehicle-to-grid (V2G) control development to mitigate any voltage violations and reduce peak load. A methodology is proposed for model-predictive control …

Modern Potentiostat Architectures For Electrochemical Sensing: Design, Integration, And Future Directions, Reagan Aviha, Gymama Slaughter

Center for Bioelectronics Publications

Potentiostats are essential to electrochemical sensing, enabling precise control of electrode potentials and measurement of current responses. As demand grows for portable, wearable, and point-of-care systems, potentiostat design has evolved from benchtop instruments to compact, low-power, and wirelessly connected platforms. This review provides a comprehensive, system-level perspective on modern potentiostat architectures, covering operational principles, analog front-end design, signal generation and acquisition, communication protocols, and software integration. Unlike prior reviews that treat these aspects independently, this work integrates electrochemical theory with electronic design and data communication frameworks. Key components, including operational amplifiers, transimpedance amplifiers, DAC/ADC subsystems, and microcontroller-based control, are examined …

Distributed Vibration Sensing For Identification Of Loose Connectors In Coaxial Data Transmission Lines, Saidanvar Esanjonovich Valiev, Anthony C. Okafor, Jeremiah J. Rittenhouse, Jie Huang, Daniel S. Stutts

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This study investigates the effect of vibration-induced loose connections on signal reflection (S11) for loose connection identification in aerospace coaxial cables using distributed sensing approach, which is effective in filtering the noise and identifying minor discontinuities. In this approach, a sliding gated window is applied to S11 signal, a fast Fourier transform is performed over the gated windows, cross-correlation is computed between the baseline and vibration-affected signals, and the standard deviation is mapped along the cable length. Sinewave signals from 9 kHz to 5 GHz were swept through cables with vibrating connectors under three conditions: fully tightened, loosened by 180°, …

Agricultural Productivity Under Energy Development: Insights From California, Wai Yan Siu, Sherzod B. Akhundjanov

ODU Articles

This paper examines how agricultural productivity patterns in Kern County, California, a leading region for both agricultural production and oil and gas development, co-vary with the spatial and temporal expansion of hydraulic fracturing and associated energy infrastructure. Using parcel- and county-level analyses, we characterize how agricultural productivity differs across proximity to energy development and across spatial scales. The results reveal spatially heterogeneous and scale-dependent patterns: parcel-level evidence indicates lower Enhanced Vegetation Index-based vegetation productivity within the 20-mile proximity zone around fracking wells, while county-level results show heterogeneous crop-specific yield changes during the post-expansion period. Together, these findings highlight the importance …

Array Signal Processing And Machine Learning In 5g/6g Networks, Roopesh Kumar Polaganga

Electrical Engineering Dissertations - Archive

This dissertation investigates advanced methodologies in Array Signal Processing (ASP) and Machine Learning (ML) to enhance the performance, efficiency, and intelligence of next-generation wireless networks, with a primary focus on 5G and emerging 6G systems. As wireless networks face rapid traffic growth, increasingly heterogeneous service requirements, and more complex propagation environments, conventional design and optimization approaches become insufficient to meet evolving demands in reliability, capacity, spectral efficiency, and energy efficiency. On the network intelligence side, this work develops data-driven frameworks for causal discovery, scheduler enhancement, session-duration prediction, and Radio Resource Control (RRC) state optimization using real-world telecommunication network data. On …

Evaluation Of Multiple Generative Large Language Models On Neurology Board-Style Questions, Mohammad Almomani, Vijaya Valaparla, James Weatherhead, Xiang Fang, Alok Dabi, Chih Ying Li, Peter Mccaffrey, Dan Hier, Jorge Mario Rodríguez-Fernández

Electrical and Computer Engineering Faculty Research & Creative Works

Objective: To compare the performance of eight large language models (LLMs) with neurology residents on board-style multiple-choice questions across seven subspecialties and two cognitive levels. Methods: In a cross-sectional benchmarking study, we evaluated Bard, Claude, Gemini v1, Gemini 2.5, ChatGPT-3.5, ChatGPT-4, ChatGPT-4o, and ChatGPT-5 using 107 text-only items spanning movement disorders, vascular neurology, neuroanatomy, neuroimmunology, epilepsy, neuromuscular disease, and neuro-infectious disease. Items were labeled as lower- or higher-order per Bloom's taxonomy by two neurologists. Models answered each item in a fresh session and reported confidence and Bloom classification. Residents completed the same set under exam-like conditions. Outcomes included overall and …

Solving High-Dimensional Differential Equations Using Recurrent And Residual Neural Network Architectures, Hind Khaled Kolaib

Knowledge Engineering and Data Science

High-dimensional Partial Differential Equations (PDEs) form the foundation of complex process modeling in various scientific and engineering applications, including finance, physics, and optimal control. However, classical numerical methods are adversely affected by the curse of dimensionality, making them inapplicable for large-scale problems. Recently, however, deep learning-based approaches have provided a new toolbox for these high-dimensional PDEs, including methods such as the Deep Backward Stochastic Differential Equation (Deep BSDE) method. Our approach draws on a more sophisticated deep learning backbone, using neural networks (in our case, a Residual Neural Network and a Long Short-Term Memory network (LSTM) integrated into the Deep …

A Full Polymer Piezoelectric Flextensional Energy Harvester, Nadia Ahbab, Sidra Naz, Bingqi Zhao, Tian-Bing Xu

Mechanical & Aerospace Engineering Faculty Publications

This study presents a full polymer piezoelectric flextensional energy harvester (FPPFEH) comprising a single-layer poly(vinylidene fluoride) (PVDF) film bonded to a 3D-printed polylactic acid (PLA) flextensional frame. For an arm inclination angle of θ=10°, the free-body model gives a theoretical geometric force-amplification factor of M_F=cot θ ≈ 5.67; this value represents an ideal upper bound and was not independently validated by local force or strain measurements. During assembly, the film was tensioned only to remove visible slack and maintain a flat configuration. No intentional pretension was applied, and any residual tension was not measured. Off-resonance force-controlled tests showed …

Multi-Objective Optimization Of Energy Costs And Ev Battery Health In V2g Enabled Homes, Dzifa M. Hodey

Theses and Dissertations--Computer Science

Electric vehicles (EVs) and rooftop solar photovoltaic (PV) systems are increasingly being integrated into residential settings, creating new opportunities for vehicle-to-grid (V2G) and vehicle-to-home (V2H) operations. In these systems, the EV battery functions as a controllable energy storage unit that can charge from the grid or PV and discharge energy to supply household load or export to the grid for a profit. By intelligently scheduling this bidirectional power exchange, households can reduce electricity costs and enhance PV utilization. Realizing these benefits requires optimization strategies that balance cost reduction with EV battery health preservation. However, existing V2G/V2H studies largely emphasize cost …

Advancing Task-Oriented Dialog Systems: Scalability, Generalization, And Evaluation, Adib Mosharrof

Theses and Dissertations--Computer Science

Task-oriented dialog (TOD) systems enable conversational interfaces for complex tasks like flight booking and restaurant reservations. However, deploying TOD systems at scale faces three critical barriers: scalability, generalization, and evaluation. Scalability is primarily restricted by the human-annotation bottleneck, as current systems depend on vast quantities of manually labeled data for every new domain, making deployment prohibitively expensive. Generalization remains a persistent challenge, as systems optimized for known domains often suffer significant performance degradation when encountering new, unseen ones. Existing evaluation metrics measure response quality and fluency, but fail to measure functional task success. As TOD systems are deployed across diverse …

Consensus And Controversies Of International Guidelines For The Diagnosis, Surveillance, And Management Of Fetal Growth Restriction: An Updated Comparison, Daniele Diane Mascio, Suneet P. Chauhan, Tullio Ghi, Asma Khalil, Juliana G. Martins, Sara Sorrenti, Tamara Stampalija, Fabrizio Zullo, Francesc Figueras

Department of Obstetrics & Gynecology Faculty Publications

OBJECTIVE: To compare areas of consensus and disagreements across contemporary international and national guidelines on the diagnosis, surveillance, and management of fetal growth restriction (FGR).

DATA SOURCES: Electronic searches of MEDLINE from database inception up to March 2026 using MeSH terms and keywords related to FGR and guidelines. STUDY ELIGIBILITY CRITERIA: Critical, structured comparison of national or international guidelines on FGR published since 2010. Final inclusion required unanimous agreement from all authors.

STUDY APPRAISAL AND SYNTHESIS METHODS: Pre-specified extraction across domains: definition; prediction/prevention; surveillance tools and frequency; delivery timing and mode; and labor induction methods. Dual data …

Vision‑Based Online Quality Tracking In Wire Arc Additive Manufacturing Via Hybrid Unsupervised Deep Learning–Statistical Process Monitoring, Giulio Mattera, Yue Cao, Yuming Zhang, Luigi Nele

Electrical and Computer Engineering Faculty Publications

Vision-based monitoring of Wire Arc Additive Manufacturing (WAAM) using supervised deep learning represents the state of the art in anomaly detection, but such approaches require large labeled datasets that are costly to obtain and typically limited to laboratory conditions. To address these limitations, this work proposes a hybrid deep learning–statistical process monitoring (SPM) framework tailored to the stochastic nature of conventional arc welding processes such as GMAW-based additive manufacturing, where existing methods often overfit. The framework integrates a residual convolutional autoencoder (Res-CAE) with skip connections, which jointly analyzes video frames to generate refined latent-space features that are subsequently monitored using …

Co-Sputtered Cuni Heteroatomic Electrocatalyst For Enhanced 5-Hydroxymethylfurfural Selective Electrochemical Conversion, Moumita Dikshit, Baleeswaraiah Muchharla, Luz Vazquez Rivera, Kapil Kumar, Sunita Sanwaria, Kishor Kumar Sadasivuni, Abdennaceur Karoui, Sandeep Kumar, Adetayo Adedeji, Bijandra Kumar

Civil & Environmental Engineering Faculty Publications

The electrochemical conversion of biomass-derived 5-hydroxymethylfurfural (HMF) represents a promising, economically viable, and environmentally sustainable approach for producing value-added chemicals using renewable energy and in situ hydrogen generated through water electrolysis. However, the electrochemical hydrogenation (ECH) of HMF remains challenging due to the inherently low catalytic activity and selectivity of the electrodes, compounded by competition with the kinetically favored hydrogen evolution reaction (HER) in aqueous electrolytes. In this work, we demonstrate that Cu_xNi_100-x heteroatomic thin films, fabricated via direct current (DC) magnetron co-sputtering, achieve a more than one order of magnitude increase in the HMF to 2,5-Bis-hydroxymethylfuran …

Distributed Temperature Sensing In The Spray-Cooled Shell Of A 150-Ton Dc Electric Arc Furnace Using Brillouin Optical Fiber Technology, Farhan Mumtaz, Yeshwanth Reddy Mekala, Koustav Dey, Rony Kumer Saha, Ogbole Collins Inalegwu, Manoj Kumar Pullagura, Bohong Zhang, Muhammad Roman, Nicholas Dionise, Zane Voss, Jeffrey D. Smith, Ronald J. O'Malley, Rex E. Gerald, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents the deployment and validation of a Brillouin - distributed temperature sensing (DTS) system for real-time thermal monitoring of the spray-cooled upper shell of a 150-ton direct current Electric Arc Furnace (DC EAF) at Big River Steel Plant, Osceola, AR, USA. A four-channel Brillouin DTS system from OZ Optics was employed, with one active channel instrumented using an in-house-fabricated Brillouin scattering-depressed single-mode optical fiber (SMF28e+). The 60 m optical fiber sensor was fabricated, with 20 m allocated for thermal measurement and 40 m used as lead-in fiber to isolate the interrogator from the furnace environment. The fiber was …

Analysis Of Policies And Incentives For The Successful Implementation Of Hydrogen-Fueled Medium-Duty And Heavy-Duty Vehicles In Humboldt County, California, Alka Verma

Cal Poly Humboldt theses and projects

The 21st century has seen a significant rise in global greenhouse gas (GHG) emissions, with the transportation sector contributing 23% of these emissions. Medium-duty and heavy-duty vehicles (MD/HD) are particularly impactful, accounting for over a quarter of transport-related emissions. In Humboldt County, California, transportation represents 53% of total emissions, with MD/HD vehicles being a major contributor. As light-duty vehicles shift to zero-emission alternatives, the MD/HD sector faces unique challenges. Hydrogen fuel cell vehicles offer a promising solution, providing longer range, higher energy density, and quicker refueling compared to battery electric vehicles (BEVs). These features make hydrogen an attractive option for …

Deep Learning For Wireless Communications, Swarada Ajit Kulkarni

Electrical Engineering Dissertations

The rapid evolution of wireless communication imposes stringent requirements for ultra-reliable, low-latency transmission in dynamic, interference-prone environments. Traditional model-driven signal processing struggles to adapt to nonlinear hardware effects, time-varying channels, and complex interference patterns. Deep learning (DL) offers a transformative, data-driven alternative, enabling end-to-end optimization and robust adaptation under uncertain propagation conditions.

This dissertation investigates deep learning architectures for intelligent and resilient wireless communication through three complementary contributions. The first introduces a Vision Transformer (ViT)-based modulation classification framework that leverages self-attention to capture local and global dependencies in spectrogram representations of Quadrature Amplitude Modulation (QAM) signals. The ViT achieves superior …

Artificial Sense-Making Dataset, Jason A. Bengtson, John Sandstrom, Nathan Camp

NMSU Library: Datasets

No abstract provided.

Delay-Doppler Integrated Sensing And Communications (Dd-Isac) With Predictive Beamforming, Mohammad Abdul Mobin, Yanjun Pan, Jingxian Wu

Electrical Engineering and Computer Science Faculty Publications and Presentations

A new delay-Doppler (DD) integrated sensing and communications (ISAC) framework is proposed for unmanned aerial vehicle (UAV) systems. In the DD-ISAC framework, both sensing and communications are performed by using the orthogonal delay Doppler division multiplexing (ODDM) waveforms, which unify sensing and communication designs through the unique ODDM waveform properties, such as local DD-domain bi-orthogonality and dual-resolution. Specifically, the dual-resolution property enables the generation of a range-Doppler map for accurate and low complexity sensing, and the bi-orthogonality minimizes interference for both sensing and communications. The ODDM waveforms are used in combination with the phase comparison monopulse technique and a scaled …

Adaptive Boundary-Aware Fact-Checker Placement For Misinformation Suppression In Social Networks, Mostafa Taghizade Firouzjaee, Ghazal Naderi, Ross Gore, Neda Moghim

School of Cybersecurity Faculty Publications

The spread of fake news on online social networks is driven by imitation-based user behavior and network topology, often leading to persistent misinformation clusters and echo chambers. In this study, we develop a spatial evolutionary game-theoretic framework in which agents update their latent opinions through payoff-biased imitation, while external fact-checkers act as non-imitative intervention nodes. Building on this formulation, we propose an adaptive, boundary-aware intervention mechanism that dynamically regulates both the density and spatial allocation of fact-checkers according to real-time system conditions. Competing information clusters are identified through local neighborhood composition, enabling boundary nodes, i.e., interfaces between fake-news and non-fake-news …

Modeling Rank Distribution And The Relative Importance Factor Index In Discrete Power-Law Models: Application To Social Resilience Using The Scopus Database, Brian Llinas, Jose Padilla, Humberto Llinas, Erika Frydenlund, Katherine Palacio

VMASC Publications

Prior research on power-law distributions has primarily focused on modeling frequency patterns, with less attention given to rank distributions and how ranked positions reflect relative importance among elements. In discrete power-law distributions, frequency-based metrics often provide limited discrimination in the tail, where elements may exhibit similar counts but differ in relative dominance. These patterns are especially evident, for instance, in academic publishing, where keywords, affiliations, and citations commonly exhibit power-law behavior. To address this limitation, we introduce the Relative Importance Factor (RIF) Index, a statistical measure derived from the estimated discrete power-law rank distribution rather than an additional independent parameter. …

Element-Based Predictive Modeling Of Hydrothermal Liquefaction Bioproducts Derived From Corn Stover, Isamu Umeda, Meicen Liu, Yi Zheng, Jiefu Wang, Zhiwu Wang, Sandeep Kumar

Civil & Environmental Engineering Faculty Publications

The hydrothermal liquefaction (HTL) process offers an energetic advantage over pyrolysis because it does not require prior drying of the biomass feedstock. However, there are significant challenges in simultaneously estimating both the yields and characteristics of products from the HTL of biomass with theoretical support. This study developed a unique element-based kinetic model to predict the yields, higher heating values, and fuel characteristics of solid residue and heavy bio-oil, based on the temperature, residence time, solid loading, and elemental composition (C, H, N, and O) of corn stover. Furthermore, the model predicted the weights of dissolved carbon and nitrogen in …

Electron Beam Irradiation Effects On Bulk Metals: A Comparative Study Of Polycrystalline Versus Single-Crystalline Structures, A. A. Elmustafa, N. A. Sultana, A. H. Al-Allaq, M. Ojha, Y. S. Mohammed, J. Vennekate, H. Baumgart

Mechanical & Aerospace Engineering Faculty Publications

This study investigates the effects of electron beam (e-beam) irradiation on the mechanical and structural properties of eight bulk metallic samples, comprising both polycrystalline (PC) and single-crystalline (SC) forms of Ni, Cr, V, and Ti. These metals were evaluated as potential candidates for beam exit windows in high-power (MW-class) particle accelerators. The primary objective is to identify metals capable of withstanding the conditions of high-power/MW-class e-beam accelerators and serve effectively as exit windows. Selection criteria were based on each metal’s intrinsic properties, power dissipation capability, and irradiation-induced changes in mechanical behavior, including hardness, elastic modulus, and defect density. Comprehensive characterization …

From Comparison To Integration: Building Energy Simulation Tool Variability And The Case For Intelligent Retrofit Workflows, Amir Safari, Dalya Ismael, Mahsa Safari, James Freihaut

Engineering Technology Faculty Publications

As the urgency to address climate change and modernize energy infrastructure grows, the building sector plays a key role in improving energy efficiency and reducing carbon emissions. This study evaluates five energy retrofit strategies for Building 101 at The Navy Yard in Philadelphia, comparing two real-world proposals from energy service companies with three simulation-based packages derived from Building Energy Simulation (BES) tools. The study examined whether advanced BES tools provide greater accuracy and decision-making value compared to simpler alternatives. Electricity savings ranged from 5 % to 40 %, gas savings from 29.7 % to 61 %, and annual cost reductions …

Generative Ai And Llm Applications In Renewable Energy And Smart Grids: A Systematic Review For The Sustainable Energy Transition, Umit Cali, Ugur Halden, Merlinda Andoni, Ferhat Ozgur Catak, Si Chen, Benoit Couraud, Emre Kantar, Samuel Knapper, Ibrahim Kucukdemiral, Huseyin Kusetogullari, Murat Kuzlu, Yashar Mousavi, Sonam Norbu, Taha Selim Ustun, David Flynn

Engineering Technology Faculty Publications

The global energy transition toward decarbonization and digitalization requires advanced methods to manage decentralized, data-intensive cyber-physical energy systems. This systematic review analyzes 106 research studies on Generative Artificial Intelligence (GenAI) and Large Language Models (LLMs) in renewable energy and smart grids, organized into seven application clusters covering forecasting, system design, operation, reliability, data and cybersecurity, and energy markets. The review situates these applications within a Cyber-Physical-Social Systems (CPSS) framework. Results show that GANs dominate current applications (47.2%), followed by LLMs (10.4%) and VAEs (9.4%), with growing adoption of diffusion and score-based models (7.5% each). Selected studies report improved probabilistic forecasting …

Adaptive Multi-Grade Deep Learning For Highly Oscillatory Fredholm Integral Equations Of The Second Kind, Jie Jiang, Yuesheng Xu

Mathematics & Statistics Faculty Publications

This paper studies the use of Multi-Grade Deep Learning (MGDL) for solving highly oscillatory Fredholm integral equations of the second kind. We provide rigorous error analyses of continuous and discrete MGDL models, showing that the discrete model retains the convergence and stability of its continuous counterpart under sufficiently small quadrature error. We identify the DNN training error as the primary source of approximation error, motivating a novel adaptive MGDL algorithm that selects the network grade based on training performance. Numerical experiments with highly oscillatory (including wavenumber 500) and singular solutions confirm the accuracy, effectiveness and robustness of the proposed approach.

Control System Emendation And Ai-Driven Optimization For Enhancing A Smart Residential Microgrid, Anthony Nyoyoko

Master’s Theses

This thesis began with a simple idea: to restore the control system of a smart residential microgrid to respond intelligently to electricity prices while remaining safe, reliable, and practical on low-cost hardware. At the start, the goal was to design an economically aware microgrid that could look at electricity prices from the PJM market and make better operational decisions than traditional rule-based control. The motivation was straightforward. As residential renewable energy adoption increases, microgrids are expected to do more than just supply power. They are expected to respond to price volatility, integrate renewable generation, and operate reliably using embedded controllers …

Dynamic Direct Voltage Control Under Maximum Torque Per Ampere For Interior Pmsms, Mohamad Alzayed, Hicham Chaoui, Alaref Elhaj

Electrical & Computer Engineering Faculty Publications

A novel method for controlling the speed of interior permanent magnet synchronous motors (IPMSMs), known as the current-sensing-based dynamic direct voltage control method under the maximum torque per ampere (MTPA) concept, is introduced. This technique achieves precise tracking of machine velocity by determining the optimal combination of voltage amplitude and angle for each specific motor velocity and current/load condition. Unlike previous studies, this approach takes into account the transient model of the machine, resulting in improved accuracy during dynamic operating conditions compared with existing methods in the literature. Moreover, a comparative analysis is conducted involving different direct voltage MTPA speed …

Qubit Lattice Algorithm Simulations Of The Scattering Of A Bounded Two Dimensional Electromagnetic Pulse From The Infinite Planar Dielectric Interface, Min Soe, George Vahala, Linda Vahala, Efstratios Koukoutsis, Abhay K. Ram, Kyriakos Hizanidis

Electrical & Computer Engineering Faculty Publications

Qubit lattice algorithm (QLA) simulations are performed for a two-dimensional spatially bounded pulse propagating onto a plane interface between two dielectric slabs. QLA is an initial value scheme that consists of a sequence of unitary collision and streaming operators, with appropriate potential operators, that recover Maxwell equations in inhomogeneous dielectric media to the second order in the lattice discreteness. For the case of total internal reflection, there is transient energy transfer into the second medium due to the evanescent fields as the Poynting unit vector of the pulse is rotated from its incident to reflected direction. Because of the finite …

Development Of Feature Tokenizer Deep Learning Model For Fault Diagnosis In Marine Propulsion System, Pratik Anand Deshpande, J. Preetha Roselyn, Prabha Sundaravadivel

Electrical Engineering Faculty Publications and Presentations

The fault diagnostics in Brushless Direct Current (BLDC) motor drive system is critical for operational safety and system lifespan in propulsion system applications. However, signature parameters such as currents, voltages, speed, and torque have provided nonlinear behavior, which limits the usefulness of traditional model-based approaches. This research provides a deep learning based intelligent system to monitor the failures in marine propulsion system. Each signal feature is represented as a structured token, with a specific class token used to collect global contextual information. The proposed model captures both local temporal dynamics and global inter-feature interdependence multi-layer self-attention processes, allowing for the …

Stem-Fit And Soil-Fit: Integrated Plant And Soil Nitrogen-Hormone Sensing With Machine Learning-Based Forecasting For Next-Generation Precision Agriculture, Nafize I. Hossain, Mohammad Solaiman, A.K.M. Ahsanul Habib, Md Al Mahmud Hossain Al Hadi, Shawana Tabassum

Electrical Engineering Faculty Publications and Presentations

Inefficient fertilizer application in agriculture leads to reduced crop productivity, nutrient losses, and reduced crop resilience, highlighting the urgent need for real-time monitoring of plant–soil nutrient and stress dynamics. This research aims to develop and validate a multiplexed sensing platform for real-time, in-situ measurement of key soil nutrients (Soil-FIT) and plant phytohormones (Stem-FIT) involved in nitrogen signaling and stress regulation. The proposed sensor suite integrates 3D-printed modules for continuous monitoring of nitrate, ammonium, and pH in both soil and plant sap, along with salicylic acid (SA), indole-3-acetic acid (IAA), methyl jasmonate (MeJA), and ethylene (ET) in plant sap. The sensors, …