Engineering Commons^™

Split And Join: An Efficient Approach For Simulating Stapled Intestinal Anastomosis In Virtual Reality, Di Qi, Suvranu De

Engineering Faculty Articles and Research

Colorectal cancer is a life-threatening disease. It is the second leading cause of cancer-related deaths in the United States. Stapled anastomosis is a rapid treatment for colorectal cancer and other intestinal diseases and has become an integral part of routine surgical practice. However, to the best of our knowledge, there is no existing work simulating intestinal anastomosis that often involves sophisticated soft tissue manipulations such as cutting and stitching. In this paper, for the first time, we propose a novel split and join approach to simulate a side-to-side stapled intestinal anastomosis in virtual reality. We mimic the intestine model using …

Calculations Of Adsorption-Dependent Refractive Indices Of Metal-Organic Frameworks For Gas Sensing Applications, Nahideh Salehifar, Peter Holtmann, Abhishek Prakash Hungund, Homayoon Soleimani Dinani, Rex E. Gerald, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

Detection of Volatile Organic Compounds (VOCs) is One of the Most Challenging Tasks in Modelling Breath Analyzers Because of their Low Concentrations (Parts-Per-Billion (Ppb) to Parts-Per-Million (Ppm)) in Breath and the High Humidity Levels in Exhaled Breaths. the Refractive Index is One of the Crucial Optical Properties of Metal-Organic Frameworks (MOFs), Which is Changeable Via the Variation of Gas Species and Concentrations that Can Be Utilized as Gas Detectors. Herein, for the First Time, We Used Lorentz–Lorentz, Maxwell–Ga, and Bruggeman Effective Medium Approximation (EMA) Equations to Compute the Percentage Change in the Index of Refraction (∆n%) of ZIF-7, ZIF-8, ZIF-90, …

On Refinements To Qmfd Based Chirp Parameter Estimation, Balu Santhanam, Thalanayar Santhanam

Electrical & Computer Engineering Technical Reports

Commuting matrix methods furnish a full basis of orthog- onal eigenvectors for the discrete Fourier transform or its centered version needed for computing the discrete fractional Fourier transform and multicomponent chirp signal analysis. However, these approaches suffer from ill-conditioning issues at higher matrix sizes, and require a computationally expensive eigenvalue decomposition.

In this paper, ill-conditioning issues associated with the QMFD approach developed previously by the authors are addressed via diagonal modification. Further symmetries of the eigenvectors are used to reduce the size of the underlying eigenvalue problem. These modifications are then incorporated into the real-arithmetic implementation of the QMFD approach …

A Representation For Many Player Generalized Divide The Dollar Games, Garrison Greenwood, Daniel Ashlock

Electrical and Computer Engineering Faculty Publications and Presentations

Divide the dollar is a simplified version of a two player bargaining problem game devised by John Nash. The generalized divide the dollar game has n > 2 players. Evolutionary algorithms can be used to evolve individual players for this generalized game but representation—i.e., a genome plus a move or search operator(s)—must be carefully chosen since it affects the search process. This paper proposes an entirely new representation called a demand matrix. Each individual in the evolving population now represents a collection of n players rather than just an individual player. Players use previous outcomes to decide their choices (bids) in …

Strengthen Building Of Basic Reach Capacity For Semiconductor Research To Light Up “Beacon” Towards Realizing The Self-Reliance And Self-Improvement Of Semiconductors, Junwei Luo, Shushen Li

Bulletin of Chinese Academy of Sciences (Chinese Version)

No abstract provided.

Causes, Countermeasures And Enlightenment Of “Eu Semiconductor Crisis”: Interpretation Around The European Chips Act, Junfeng Li, Ying Zhang

Bulletin of Chinese Academy of Sciences (Chinese Version)

The European Union (EU) is one of the origins of the global semiconductor industry, but due to its structural defects in the semiconductor value chain, it has encountered a crisis of chip shortages and supply cuts since 2021. The European Chips Act drafted by EU proposes a path for semiconductor ecological construction, crisis intervention regulatory measures, and outlines a blueprint for a "national system for the chip industry with EU characteristics". These factors are of speculative significance and reference value for China to balance the relationship between the government and the market, subsidies and competition, key construction and inclusive support …

Analysis On Bottleneck And Prospect Of Integrated Circuit Talent Training Oriented To Sci-Tech Self-Reliance And Self-Strengthening At Higher Levels, Kaixuan Guan, Jiang Yu, Jianzhong Zhou, Feng Chen, Yan Han

Bulletin of Chinese Academy of Sciences (Chinese Version)

The most essential feature of building a new development paradigm is to achieve sci-tech self-reliance and self-strengthening at higher levels. The integrated circuit industry, as an important pillar to achieve this essential feature, is facing a severe external situation. China's chip shortage pain begins with a shortage of talents. The structural problem of uneven development at the overall level of the industry makes it more difficult to effectively gather and distribute talents. To achieve sci-tech self-reliance and self-strengthening at higher levels, we need to be both demand-oriented and problem-oriented, which means not only to pay attention to the core technology …

A Highly Efficient Broadband Multi-Functional Metaplate, Azhar Javed Satti, Muhammad Ashar Naveed, Isma Javed, Nasir Mahmood, Muhammad Zubair, Muhammad Qasim Mehmood, Yehia Massoud

Department of Electrical and Computer Engineering: Faculty Publications

Due to the considerable potential of ultra-compact and highly integrated meta-optics, multi-functional metasurfaces have attracted great attention. The mergence of nanoimprinting and holography is one of the fascinating study areas for image display and information masking in meta-devices. However, existing methods rely on layering and enclosing, where many resonators combine various functions effectively at the expense of efficiency, design complication, and complex fabrication. To overcome these limitations, a novel technique for a tri-operational metasurface has been suggested by merging PB phase-based helicity-multiplexing and Malus's law of intensity modulation. To the best of our knowledge, this technique resolves the extreme-mapping issue …

Opal Actigraphy (Activity And Sleep) Measures Compared To Actigraph: A Validation Study, Vrutangkumar Shah, Barbara H. Brumbach, Sean Pearson, Paul Vasilyev, James Mcnames, Multiple Additional Authors

Electrical and Computer Engineering Faculty Publications and Presentations

Physical activity and sleep monitoring in daily life provide vital information to track health status and physical fitness. The aim of this study was to establish concurrent validity for the new Opal Actigraphy solution in relation to the widely used ActiGraph GT9X for measuring physical activity from accelerometry epic counts (sedentary to vigorous levels) and sleep periods in daily life. Twenty participants (age 56 + 22 years) wore two wearable devices on each wrist for 7 days and nights, recording 3-D accelerations at 30 Hz. Bland–Altman plots and intraclass correlation coefficients (ICCs) assessed validity (agreement) and test–retest reliability between ActiGraph …

Semiconductor Devices, Sheila D. Hill Pe

KSU Distinguished Course Repository

3 Class Hours, 0 Laboratory Hours, 3 Credit Hours Prerequisites: CHEM 1211, CHEM 1211L, EE 1000
This course effectively applies the knowledge of chemistry and physics to understand the operating principles of various semiconductor devices. The course covers topics starting from the fundamental concepts of atomic and crystal structure, crystal growth, impurity doping and energy bands to the in-depth device operation and quantitative analysis of p-n junction diode, metal-semiconductor contacts and Schottky diode, BJTs and MOSFETs. Also fundamental operating principles of optoelectronic devices such as, LEDs and photodiodes are discussed. Simple device simulation components reinforces the understanding of various critical …

Graphene-Conductive Polymer-Based Electrochemical Sensor For Dopamine Detection, Dipannita Ghosh, Md Ashiqur Rahman, Ali Ashraf, Nazmul Islam

Electrical and Computer Engineering Faculty Publications

The central nervous system's (CNS) dopaminergic system dysfunction has been linked to neurological illnesses like schizophrenia and Parkinson's disease. As a result, sensitive and selective detection of dopamine is critical for the early diagnosis of illnesses associated with aberrant dopamine levels. In this research, we have investigated the performance of electrochemical screen-printed sensors for different concentrations of dopamine detection using graphene-based conductive PEDOT: PSS(G-PEDOT: PSS) and Polyaniline(GPANI) inks on the working electrode and compared the sensitivity. SEM characterization technique has been performed to visualize the microstructures of the proposed inks. We have investigated cyclic voltammetry (CV) electrochemical techniques with ferri/ferrocyanide …

Session 12: Analysis Of State And Parameter Estimation Techniques Using Dynamic Perturbation Signals, Timothy M. Hansen

SDSU Data Science Symposium

The trend in electric power systems is the displacement of traditional synchronous generation (e.g., coal, natural gas) with renewable energy resources (e.g., wind, solar photovoltaic) and battery energy storage. These energy resources require power electronic converters (PECs) to interconnect to the grid and have different response characteristics and dynamic stability issues compared to conventional synchronous generators. As a result, there is a need for validated models to study and mitigate PEC-based stability issues, especially for converter dominated power systems (e.g., island power systems, remote microgrids).

This presentation will introduce methods related to dynamic state and parameter estimation via the design …

Identification Of Volatile Organic Liquids By Combining An Array Of Fiber-Optic Sensors And Machine Learning, Wassana Naku, Anand K. Nambisan, Muhammad Roman, Chen Zhu, Rex E. Gerald, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

In This Paper, We Report an Array of Fiber-Optic Sensors based on the Fabry-Perot Interference Principle and Machine Learning-Based Analyses for Identifying Volatile Organic Liquids (VOLs). Three Optical Fiber Tip Sensors with Different Surfaces Were Included in the Array of Sensors to Improve the Accuracy for Identifying Liquids: An Intrinsic (Unmodified) Flat Cleaved Endface, a Hydrophobic-Coated Endface, and a Hydrophilic-Coated Endface. the Time-Transient Responses of Evaporating Droplets from the Optical Fiber Tip Sensors Were Monitored and Collected Following the Controlled Immersion Tests of 11 Different Organic Liquids. a Continuous Wavelet Transform Was Used to Convert the Time-Transient Response Signal into …

Hangprinter For Large Scale Additive Manufacturing Using Fused Particle Fabrication With Recycled Plastic And Continuous Feeding, Ravneet S. Rattan, Nathan Nauta, Alessia Romani, Joshua Pearce

Electrical and Computer Engineering Publications

The life cycle of plastic is a key source of carbon emissions. Yet, global plastics production has quadrupled in 40 years and only 9 % has been recycled. If these trends continue, carbon emissions from plastic wastes would reach 15 % of global carbon budgets by 2050. An approach to reducing plastic waste is to use distributed recycling for additive manufacturing (DRAM) where virgin plastic products are replaced by locally manufactured recycled plastic products that have no transportation-related carbon emissions. Unfortunately, the design of most 3-D printers forces an increase in the machine cost to expand for recycling plastic at …

Experimental And Computational Analysis Of Broadband Thz Photoconductive Antennas, Zachary Uttley, Jose Santos Batista, Bilal Pirzada, Magda El-Shenawee

Electrical Engineering Faculty Publications and Presentations

The work presents the fabrication and measurements of four LT-GaAs photoconductive terahertz (THz) antennas with different geometries of metallic electrodes. The goal is to analyze the overall bandwidth of the antennas through a comparison between the spectra of the generated photocurrent in the antenna gap, the radiated electric field THz pulse, and the S₁₁ parameter of the metallic electrodes. The photocurrent density and the S₁₁ parameters are computed using COMSOL multiphysics, while the generated THz pulse was experimentally measured using a time-domain spectroscopy system. The polarizations of the photoconductive antennas are experimentally measured, using x-cut quartz crystal halfwave …

Impacts Of Current Limiting On The Transient Stability Of The Virtual Synchronous Generator, Kourosh Gharouni Saffar, Sina Driss, Firouz Badrkhani Ajaei

Electrical and Computer Engineering Publications

This article investigates the impacts of different current limiting strategies on the transient stability of the virtual synchronous generator (VSG). The power–angle curve of the VSG under different operating conditions is theoretically characterized in detail and experimentally verified through tests conducted on hardware-implemented lab-scale VSGs. It is shown that the reference current saturation approaches prioritizing the current vector angle, the d -axis current, and the q -axis current reshape the VSG power–angle curve in different ways. The resulting impacts on the VSG transient stability are comprehensively investigated through time-domain simulation of a battery energy storage system that is operated as …

Guest Editorial: Transition Towards Deep Decarbonisation Of Modern Energy Systems, Yujian Ye, Can Wan, Chenghong Gu, Dan Wu, Goran Strbac, Hongjian Sun, Peng Zhang, Rui Bo, Yi Tang, Zhongbei Tian

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

Customised Multi-Energy Pricing: Model And Solutions, Qiuyi Hong, Fanlin Meng, Jian Liu

Electrical and Computer Engineering Faculty Research & Creative Works

With the increasing interdependence among energies (e.g., electricity, natural gas and heat) and the development of a decentralized energy system, a novel retail pricing scheme in the multi-energy market is demanded. Therefore, the problem of designing a customized multi-energy pricing scheme for energy retailers is investigated in this paper. In particular, the proposed pricing scheme is formulated as a bilevel optimization problem. At the upper level, the energy retailer (leader) aims to maximize its profit. Microgrids (followers) equipped with energy converters, storage, renewable energy sources (RES) and demand response (DR) programs are located at the lower level and minimize their …

Natural Organic Materials Based Memristors And Transistors For Artificial Synaptic Devices In Sustainable Neuromorphic Computing Systems, Md Mehedi Hasan Tanim, Zoe Templin, Feng Zhao

Electrical and Computer Engineering Faculty Research & Creative Works

Natural organic materials such as protein and carbohydrates are abundant in nature, renewable, and biodegradable, desirable for the construction of artificial synaptic devices for emerging neuromorphic computing systems with energy efficient operation and environmentally friendly disposal. These artificial synaptic devices are based on memristors or transistors with the memristive layer or gate dielectric formed by natural organic materials. The fundamental requirement for these synaptic devices is the ability to mimic the memory and learning behaviors of biological synapses. This paper reviews the synaptic functions emulated by a variety of artificial synaptic devices based on natural organic materials and provides a …

Smart Bidirectional Charging For Frequency Support Of A Low-Inertia Vehicle-To-Grid System In Presence Of Energy Storage Systems, Majid Mehrasa, Hossein Salehfar, Daisy Flora Selvaraj, Sina Ibne Ahmed

EERC Publications, Papers, & Presentations

This paper focuses on the challenge to develop coordination between an electric vehicle (EV) charger, energy storage system (ESS), and smart charging/discharging strategy in a low-inertia grid-connected vehicle-to-grid system. Two smart bidirectional charging strategies are proposed to control EV and ESS for minimizing the frequency error by considering the EV constraints.

Robust Control Strategy For A High-Power Off-Board Ev Charger Connected To Grid-Tied Critical Loads, Majid Mehrasa, Daisy Flora Selvaraj, Hossein Salehfar

EERC Publications, Papers, & Presentations

One of the main duties of electric vehicles (EVs) is to provide smooth and robust power flow for the grid-tied loads in the vehicle-to-grid application. To this end, this paper proposes a comprehensive control system for a high-power off-board EV charger to appropriately generate/consume power when sudden reference power alteration and disturbance on the DC-link voltage measurement exist.

Enhanced Two-Step Deep-Learning Approach For Electromagnetic-Inverse-Scattering Problems: Frequency Extrapolation And Scatterer Reconstruction, Huan Huan Zhang, He Ming Yao, Lijun Jiang, Michael Ng

Electrical and Computer Engineering Faculty Research & Creative Works

The electromagnetic-inverse-scattering (EMIS) problem is solved by a novel two-step deep-learning (DL) approach in this article. The newly proposed two-step DL approach not only predicts the multifrequency EM scattered field, but also overcomes the limitation of the conventional methods for solving EMIS problems, such as expensive computational cost, strong ill-conditions, and invalidity on high contrast. In the first step, the complex-valued deep residual convolutional neural network (DRCNN) is utilized to predict multifrequency EM scattered fields only using single-frequency EM scattered field information. Based on a new complex-valued deep convolutional encoder-decoder (DCED) structure, the second step utilizes the obtained multifrequency EM …

A Novel Data-Driven Method For Two-Dimensional Angles Finding Via Uniform Rectangular Array With Automatic Pairing, Yanming Zhang, Lijun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

A new hybrid dynamic mode decomposition (HDMD) algorithm is proposed to estimate the azimuth and elevation angles of multiple independent sources for two-dimensional (2D) massive MIMO systems with the uniform rectangular array (URA). To this end, the proposed hybrid scheme integrates the modified DMD with the augmented DMD. By treating the received data as spatial-spatial correlated signals, the modified DMD is first used to decompose these signals into spatial DMD spectrum and corresponding spatial dynamic modes. The obtained spatial DMD spectrum directly yields the electrical angle in the y-direction. Then, the corresponding electrical angle in the x-direction is computed using …

Glass-Based Biodegradable Pressure Sensor Toward Biomechanical Monitoring With A Controllable Lifetime, Devdatt Chattopadhyay, Jonghyun Park, Chang-Soo Kim

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A New Class of Potentially Implantable Solid-State Sensors is Demonstrated Utilizing Biodegradable Glass as the Main Structural Material. the Device Behavior is Manipulated Via Chemical Decomposition, and Then Physically Disintegrated in a Controlled Manner. It is based on the Capacitive Sensing Mechanism, Comprising an Elastic Insulator between Two Borate-Rich Glass Substrates. This Mesoscale Pressure Sensor is Characterized by a Range of Pressure of Up to 14 MPa in a Phosphate Buffer Solution Environment. the Sensor Exhibits Good Sensitivity and Reversibility Responding to Compressive Pressures and Remains Fully Functional Before a Desired, Sudden Failure Caused by Dissolution. the Operational Lifetime Can …

Design And Analysis Of Circular Polarized Two-Port Mimo Antennas With Various Antenna Element Orientations, Fatma Taher, Hussam Al Hamadi, Mohammed S. Alzaidi, Hesham Alhumyani, Dalia H. Elkamchouchi, Yasser H. Elkamshoushy, Mohammad T. Haweel, Mohamed Fathy Abo Sree, Sara Yehia Abdel Fatah

All Works

This article presents the circularly polarized antenna operating over 28 GHz mm-wave applications. The suggested antenna has compact size, simple geometry, wideband, high gain, and offers circular polarization. Afterward, two-port MIMO antenna are designed to get Left Hand Circular Polarization (LHCP) and Right-Hand Circular Polarization (RHCP). Four different cases are adopted to construct two-port MIMO antenna of suggested antenna. In case 1, both of the elements are placed parallel to each other; in the second case, the element is parallel but the radiating patch of second antenna element are rotated by 180°. In the third case, the second antenna element …

A Simple Micromilled Microfluidic Impedance Cytometer With Vertical Parallel Electrodes For Cell Viability Analysis, Jason Eades, Julianne F. Audiffred, Micah Fincher, Jin Woo Choi, Steven A. Soper, William Todd Monroe

Michigan Tech Publications, Part 1

Microfluidic impedance cytometry has been demonstrated as an effective platform for single cell analysis, taking advantage of microfabricated features and dielectric cell sensing methods. In this study, we present a simple microfluidic device to improve the sensitivity, accuracy, and throughput of single suspension cell viability analysis using vertical sidewall electrodes fabricated by a widely accessible negative manufacturing method. A microchannel milled through a 75 µm platinum wire, which was embedded into poly-methyl-methacrylate (PMMA), created a pair of parallel vertical sidewall platinum electrodes. Jurkat cells were interrogated in a custom low-conductivity buffer (1.2 ± 0.04 mS/cm) to reduce current leakage and …

Noise2clean: Cross-Device Side-Channel Traces Denoising With Unsupervised Deep Learning, Honggang Yu, Mei Wang, Xiyu Song, Haoqi Shan, Hongbing Qiu, Junyi Wang, Kaichen Yang

Michigan Tech Publications, Part 1

Deep learning (DL)-based side-channel analysis (SCA) has posed a severe challenge to the security and privacy of embedded devices. During its execution, an attacker exploits physical SCA leakages collected from profiling devices to create a DL model for recovering secret information from victim devices. Despite this success, recent works have demonstrated that certain countermeasures, such as random delay interrupts or clock jitters, would make these attacks more complex and less practical in real-world scenarios. To address this challenge, we present a novel denoising scheme that exploits the U-Net model to pre-process SCA traces for “noises” (i.e., countermeasures) removal. Specifically, we …

Digital Twin Applications In 3d Concrete Printing, Yuxin Wang, Farhad Aslani, Arcady Dyskin, Elena Pasternak

Research outputs 2022 to 2026

The benefits of 3D concrete printing (3DCP) include reducing construction time and costs, providing design freedom, and being environmentally friendly. This technology is expected to be effective in addressing the global house shortage. This review highlights the main 3DCP applications and four critical challenges. It is proposed to combine 3D concrete printing with Digital Twin (DT) technology to meet the challenges the 3DCP faces and improve quality and sustainability. This paper provides a critical review of research into the application of DT technology in 3DCP, categorize the applications and directions proposed according to different lifecycles, and explore the possibility of …

A Computational Offloading Optimization Scheme Based On Deep Reinforcement Learning In Perceptual Network, Yongli Xing, Tao Ye, Sami Ullah, Muhammad Waqas, Hisham Alasmary, Zihui Liu

Research outputs 2022 to 2026

Currently, the deep integration of the Internet of Things (IoT) and edge computing has improved the computing capability of the IoT perception layer. Existing offloading techniques for edge computing suffer from the single problem of solidifying offloading policies. Based on this, combined with the characteristics of deep reinforcement learning, this paper investigates a computation offloading optimization scheme for the perception layer. The algorithm can adaptively adjust the computational task offloading policy of IoT terminals according to the network changes in the perception layer. Experiments show that the algorithm effectively improves the operational efficiency of the IoT perceptual layer and reduces …

In-Field Solar Panel Assessment And Fault Diagnosis, Muhammad Elgamal

Theses and Dissertations

Photovoltaic energy is a green energy that suit from small houses to high-power stations spanning large areas. In such large areas, monitoring individual panels can be a tedious task, especially if it was required to identify operational faults of these panels. Photovoltaic 4.0 technology depend on collecting data from each station and feeding them to a central processing system that can analyze operation data and hopefully locate when a fault happens. In such method, it is crucial to be accurate as much as possible and for measuring device to be accurate as well to have a clear judgement. In this …