Engineering Commons^™

Wideband Parameter Estimation Of Overhead Transmission Lines From Terminal Measurements, Fahad J. Alqahtani

Dissertations

The accurate and efficient determination of electrical parameters of transmission lines is essential when performing computer-aided analyses of power systems, including power-flow, state estimation, short-circuit, transient stability, power quality, and electromagnetic transients.

In this dissertation, a novel technique for wideband parameter estimation of frequency-dependent single-phase, three-phase transposed, and three-phase untransposed overhead lines, is proposed. The proposed technique utilizes terminal measurements of transient voltages and currents and is based on an analytical approach to solve the frequency domain 2-port nodal model of the line for the series impedance and shunt conductance per unit length as a function of the frequency. The …

Emitter Selection Optimization For Passive Synthetic Aperture Radar, Mu Kim

Theses and Dissertations

Widely distributed modern communication networks provide excellent opportunities to share the spectrum for passive radar systems, of which emitter selection is a major consideration factor. This research introduces emitter selection problem space, which consists of three SAR processing domains, namely, Data Collection, Image and Mission Performance Domains. Quantitative links between these domains are critical to formulate an optimal emitter selection problem in the Data Collection Domain and/or Image Domain, which satisfies given mission requirements in Mission Performance Domain. This research examines the properties of the SAR processing domains to develop performance metrics in the Data Collection and Image Domains, whose …

The Design And Construction Of A Radio Telescope, Avery Elizabeth Bunting, Kira Hope Tolman

Architectural Engineering

Two architectural engineering students and an electrical engineering student worked together to design and build a radio telescope that is capable of using hydrogen line astronomy to map the galaxy. The telescope is made entirely out of aluminum, which, combined with small deflection limits, made for an iterative design process that focused primarily on constructability and supporting the desired outcomes of the electrical side.

Design, Modeling, And Testing Of A Novel Inductor For Electric Vehicles: Iron Nitride Soft Magnetic Composites, Sydney F. Fultz-Waters, Jacob Krynock

Materials Engineering

New technology for electric vehicles (EVs) must meet the requirements of higher energy usage, lower costs, and more sustainable source materials. One promising material for EV power system components is iron nitride (IN) soft magnetic composites (SMCs) because of their competitive magnetic properties and high abundance of the source materials. As part of an ongoing program at Sandia National Laboratories, this project focused on using computer modeling to optimize the prototyping process for an iron nitride SMC toroidal inductor to reach a target inductance of 600 μH. Four inductors with different combinations of wiring (26 AWG and 20 AWG) and …

Energy-Aware Resource Control For Dual Connectivity Devices Running Multipath Tcp, Ramiza Shams

Theses

The introduction of Multipath Transmission Control Protocol (MPTCP) allows uninterrupted data transmission through different wireless interfaces simultaneously. It surpasses the performance and reliability of conventional Transmission Control Protocol (TCP). Alternatively, Software Defined Networking (SDN) has revolutionized traditional network management and control by introducing significant changes. It enables the networks to be programmed through a centralized controller that oversees the entire network. Despite that, energy consumption is a remarkable issue when using dual-connectivity wireless devices, most of which are battery-powered. This thesis work primarily investigates the energy value differences of devices under different congestion control algorithms by using different interface configurations …

Class F Power Amplifier And Doherty Power Amplifier Design, Shreyansh Suman

Master's Theses

The main goal of this thesis is to design and fabricate a power amplifier suitable for entry in IMS 2023 High Efficiency Power Amplifier Student Design Competition. Power amplifier design requires multiple design tradeoffs, for example, efficiency and linearity are the two main conflicting design parameters that require careful tradeoff to ensure optimum performance. Two prototypes are designed and fabricated for the competition: Class F operating at 1.5 GHz and Doherty Power Amplifier designed for an operating frequency of 3 GHz. Both prototypes meet the minimum requirement for qualifying in the IMS 2023 HEPA SDC. Class F power amplifier designed …

Neuroevolution Application To Collaborative And Heuristics-Based Connected And Autonomous Vehicle Cohort Simulation At Uncontrolled Intersection, Frederic Jacquelin, Jungyun Bae, Bo Chen, Darrell Robinette

Michigan Tech Publications

Artificial intelligence is gaining tremendous attractiveness and showing great success in solving various problems, such as simplifying optimal control derivation. This work focuses on the application of Neuroevolution to the control of Connected and Autonomous Vehicle (CAV) cohorts operating at uncontrolled intersections. The proposed method implementation’s simplicity, thanks to the inclusion of heuristics and effective real-time performance are demonstrated. The resulting architecture achieves nearly ideal operating conditions in keeping the average speeds close to the speed limit. It achieves twice as high mean speed throughput as a controlled intersection, hence enabling lower travel time and mitigating energy inefficiencies from stop-and-go …

The Impact Of Retrofitted Ventilation Approaches On Long-Range Airborne Infection Risk For Lecture Room Environments: Design Stage Methodology And Application, Adam O'Donovan

Publications

There is a continued need to improve the energy (and by extension carbon) performance of the existing building stock in Europe and globally. Recent experiences with the COVID-19 pandemic have demanded even more of the built environment disciplines when it comes to air quality and ventilation rates particularly in teaching environments which are seen as necessary developmental sectors for the learning of the population. As such it is important that these spaces are safe for students and staff where, until now, infectious disease risk assessments were not typical. In addition to this, there is a risk that envelope refurbishment (which …

Practical Podcasting: A Technical Guide To Producing Studio-Quality Podcasts, Jacob Sarmiento

Liberal Arts and Engineering Studies

Podcasting exists at the intersection of the technical aspects of audio engineering and disciplines such as journalism and story-telling. Podcasts at KCPR, the student radio station, cover a wide range of topics including the soundscape of the DIY music scene in San Luis Obispo (SLO) on SLO-Fi, the intricacies of navigating SLO on Cal Poly 101, the best of Cal Poly Athletics on The Gallop, and the voices of underrepresented populations on campus on Different Matters. KCPR utilizes podcasts to entertain and inform its audience of the various experiences possible as a Cal Poly student. As a student-run entity, KCPR …

Residual Vulnerabilities To Power Side Channel Attacks Of Lightweight Ciphers Cryptography Competition Finalists, Aurelien Mozipo, John M. Acken

Electrical and Computer Engineering Faculty Publications and Presentations

The protection of communications between Internet of Things (IoT) devices is of great concern because the information exchanged contains vital sensitive data. Malicious agents seek to exploit those data to extract secret information about the owners or the system. Power side channel attacks are of great concern on these devices because their power consumption unintentionally leaks information correlatable to the device's secret data. Several studies have demonstrated the effectiveness of authenticated encryption with advanced data, in protecting communications with these devices. A comprehensive evaluation of the seven (out of 10) algorithm finalists of the National Institute of Standards and Technology …

An Examination Of The Stiffness Terms Needed To Model The Dynamics Of An Eddy Current Based Maglev Vehicle, Colton W. Bruce, Jonathan Bird

Electrical and Computer Engineering Faculty Publications and Presentations

This paper re-examines the basis for each eddy current stiffness term computed from prior published steady-state eddy current models. The paper corrects prior analysis work by confirming, through the use of 2-D and 3-D dynamic finite element analysis modelling, that when a magnetic source is moving over an infinite-wide and infinite-long conductive sheet guideway the steady-state lateral and translational stiffness terms will be zero and only the vertical coupled stiffness terms need to be modelled. Using these observations, a much simplified 6 degrees-of-freedom (DoF) linearized eddy current dynamic force model can be used to compute the steady-state force changes in …

Range-Doppler Map Processing Chain For Marine Radar On Fpga Of An Rfsoc, Nickolas W. Ogilvie

Master's Theses

To improve the accuracy and resolution of the measurements, radar systems employ increasingly complex, resource-intensive signal processing, larger bandwidths, and higher carrier frequencies. However, implementing these improvements requires more expensive, complex electronics that are larger and use more power. Using RFSoC (Radio Frequency System on Chips) in radars can address these challenges. By combining processors, an FPGA (Field Programmable Gate Array), and RF data converters into a single integrated circuit, RFSoCs allow for radar electronics that are physically smaller, use less power, and are simpler to design. As using RFSoCs to perform RF data conversion for radars has been already …

Enhancing Telecom Churn Prediction: Adaboost With Oversampling And Recursive Feature Elimination Approach, Long Dinh Tran

Master's Theses

Churn prediction is a critical task for businesses to retain their valuable customers. This paper presents a comprehensive study of churn prediction in the telecom sector using 15 approaches, including popular algorithms such as Logistic Regression, Support Vector Machine, Decision Tree, Random Forest, and AdaBoost.

The study is segmented into three sets of experiments, each focusing on a different approach to building the churn prediction model. The model is constructed using the original training set in the first set of experiments. The second set involves oversampling the training set to address the issue of imbalanced data. Lastly, the third set …

Parameter Measurement Of 0.33 Hp Synchronous Machine Using Itech Digital Power Supply, Andrew Kargol

Master's Theses

The classical methodologies for synchronous machine modeling provide a solid estimation for synchronous machine behavior but are limited in terms of accuracy due to the assumptions made in the modeling process. The equivalent circuit model developed by the classical approach breaks down the entire machine into a singular impedance component. This allows the model to be generated more quickly but limits its accuracy. In the pursuit of developing a more realistic model, this thesis outlines the parameter measurement of a Hampden SM-100 synchronous machine. In determining the SM-100’s experimental parameters, this thesis executes and analyzes new experimental approaches to synchronous …

Efficiency Study Of A Hybrid Ac/Dc House, Eunice Dominique Solomon Santiago

Master's Theses

With the proliferation of residential-scale renewable energy sources and DC loads, it has become attractive to use residential DC electrical system that could offer benefits over the legacy residential AC electrical system. The Hybrid AC/DC house provides a sustainable alternative to preexisting residential electrical system by having both AC and DC buses. The DC bus facilitates the connection from DC sources to DC loads, whereas the AC bus interfaces AC sources to AC loads. The study develops the equations to calculate losses based on a model consisting of four main components: Multiple-Input Single-Output (MISO) converter, AC-DC converter, inverter, and DC-DC …

Design Of Class F-Based Doherty Power Amplifier For S-Band Applications, Kyle Chang

Master's Theses

Modern RF and millimeter-wave communication links call for high-efficiency front end systems with high output power and high linearity to meet minimum transmission requirements. Advanced modulation techniques, such as orthogonal frequency-division multiplexing (OFDM) require a large power amplifier (PA) dynamic range due to the high peak-to-average power ratio (PAPR). This thesis provides the analysis, design, and experimental verification of a high-efficiency, high-linearity S-band Doherty power amplifier (DPA) based on the Class F PA. Traditional Class F PAs use harmonically tuned output matching networks to obtain up to 88.4% power-added efficiency (PAE) theoretically, however the amplifier experiences poor linearity performance due …

Programmable Vibration Table Retrofit With Eagle Medical, Jonathan Ilagan, Madhav Asok, Max Lewter

Biomedical Engineering

This project aimed to repair and upgrade a vibration table used for package testing for the sponsor, Eagle Medical - a medical packaging and sterilization company based in Paso Robles, California. The current vibration table is not programmable and lacks circuit diagrams, making it difficult to repair. In addition, it is not functional due to internal circuitry issues and power requirements. To address these issues, the team will implement several upgrades to improve the product and allow for better random cyclic vibration testing. A full assessment of the existing vibration table will be conducted to ensure the viability of these …

A Magneto-Thermally Controllable Microstrip-Patch Antenna For Low Rcs Applications, Sallam Mohammad Al Hendi

Theses

This research focuses on the development of a novel technique for reducing the Radar Cross Section (RCS) of a microstrip antenna operating in the terahertz spectral regime. This can be accomplished by loading the antenna with Indium Antimonide (InSb); a thermally-magnetically controllable semi-conductor. The low-RCS feature of the antenna implies that it becomes hardly detectable by detecting radars; a desired feature in stealthy applications. For an optimal operation beside low RCS, the other antenna parameters (e.g., radiated power, gain, standing-wave ratio, and reflection coefficient) must be within tolerable ranges. Thus, a study on the effects of the temperature and the …

Exploring The Potential Of Pavegen’S Kinetic Energy Generating Floor For Sustainable Energy Solutions: A Proposal For Cal Poly Slo, Brandon J. Cuneo

Construction Management

This paper proposes the installation of Pavegen's kinetic energy generating floors at Cal Poly’s campus as a sustainable energy solution. Pavegen has developed a pioneering technology that converts footsteps into clean and renewable energy. The versatility of these floors is demonstrated through successful implementations in various settings, such as transportation hubs and public spaces, generating power from foot traffic. Collaborations with Schneider Electric, installation at Dupont Circle, and integration at Heathrow Airport showcase the potential for sustainable urban infrastructure. This paper outlines research conducted on Pavegen and similar solutions, including communication with company representatives and examining proposed installation locations at …

Novel Approach For Non-Invasive Prediction Of Body Shape And Habitus, Emma Young

Electronic Theses and Dissertations

While marker-based motion capture remains the gold standard in measuring human movement, accuracy is influenced by soft-tissue artifacts, particularly for subjects with high body mass index (BMI) where markers are not placed close to the underlying bone. Obesity influences joint loads and motion patterns, and BMI may not be sufficient to capture the distribution of a subject’s weight or to differentiate differences between subjects. Subjects in need of a joint replacement are more likely to have mobility issues or pain, which prevents exercise. Obesity also increases the likelihood of needing a total joint replacement. Accurate movement data for subjects with …

Motion-Resistant Pulse Oximetry, Ludvik Alkhoury

Dissertations

The measurement of vital signs ? such as peripheral capillary oxygen saturation (SpO₂) and heart rate (HR) levels ? by a pulse oximeter is studied. The pulse oximeter is a non-invasive device that measures photoplethysmography (PPG) signals and extracts vital signs from them. However, the quality of the PPG signal measured by oximetry sensors is known to deteriorate in the presence of substantial human and sensor movements contributing to the measurement noise. Methods to suppress such noise from PPG signals measured by an oximeter and to calculate the associated vital signs with high accuracy even when the wearer …

Sparse Methods For Blind Source Separation Of Frequency Hopping Rf Sources, Anushreya Ghosh

Dissertations

Blind source separation (BSS) is performed on frequency hopping (FH) sources. These radio frequency (RF) signals are observed by a uniform linear array (ULA) over a Spatial Channel Model (SCM) in four different propagation environments: (i) line-of-sight (LOS), (ii) single-cluster, (iii) multiple-cluster, and (iv) LOS with interference. The sources are spatially sparse, and their activity is intermittent and assumed to follow a hidden Markov model (HMM). BSS is achieved by utilizing direction of arrival (DOA) of the sources and clusters. A sparse detection framework is applied to obtain estimates of the sources' FH and DOA patterns. The solutions are binned …

Characterization Of Low Power Hfo2 Based Switching Devices For In-Memory Computing, Aseel Zeinati

Theses

Oxide based Resistive Random Access Memory (RRAM) devices are investigated as one of the promising non-volatile memories to be used for in-memory computing that will replace the classical von Neumann architecture and reduce the power consumption. These applications required multilevel cell (MLC) characteristics that can be achieved in RRAM devices. One of the methods to achieve this analog switching behavior is by performing an optimized electrical pulse. The RRAM device structure is basically an insulator between two metals as metal-insulator-metal (MIM) structure. Where one of the primary challenges is to assign an RRAM stack with both low power consumption and …

Compact Wideband Circularly-Polarised Slot Antenna For Ambient Rf Energy Harvesting, Khatereh Nadali, Jakub Przepiorowski, Neeraj Kumar Maurya, Patrick Mcevoy, Max Ammann

Conference papers

A dual-port dual-sense wideband circularly- polarised (CP) printed slot antenna is proposed. The compact coplanar waveguide (CPW)-fed antenna is proposed for ambient energy harvesting applications. Two identical CPW feeds excite ±45° fan-shaped stubs in the elliptical slot, providing a wide bandwidth. By separating the ground plane and slot by two narrow strips, an isolation better than 19.4 dB between the ports is achieved. The measured impedance bandwidth is 850 MHz (2.08 GHz to 2.93 GHz) and the 3dB axial-ratio bandwidth is 870 MHz (2.04 GHz to 2.91 GHz).

Using An Embedded System For A Quality Cup Of Coffee, Evan Powers, Joshua Stermer, Tsion Yohannes

2023 Symposium

Many coffee lovers spend up to $5 on a cup of coffee everyday. To save money one could make them at home, but a quality machine with PIDs start at $1000. Using an embedded system one could spend less than $50 and a few hours implement PIDs into an existing $400 machine that will last a lifetime. microcontroller. Learning C language combined with hardware implementation applied to cheap and simple everyday objects can improve everyday quality of life and save money.

This is challenging because we have to incorporate the additional circuitry into a pre established circuit with limited space, …

Fe Nanoparticles Encapsulated In N-Doped Porous Carbon For Efficient Oxygen Reduction In Alkaline Media, Chun-Yan Li, Rui Zhang, Xiao-Jie Ba, Xiao-Le Jiang, Yao-Yue Yang

Journal of Electrochemistry

Rational design and synthesis of non-precious-metal catalyst plays an important role in improving the activity and stability for oxygen reduction reaction (ORR) but remains a major challenge. In this work, we used a facile approach to synthesize iron nanoparticles encapsulated in nitrogen-doped porous carbon materials (Fe@N-C) from functionalized metal-organic frameworks (MOFs, MET-6). Embedding Fe nanoparticles into the carbon skeleton increases the graphitization degree and the proportion of graphitic N as well as promotes the formation of mesopores in the catalyst. The Fe@N-C-30 catalyst showed the excellent ORR activity in alkaline solutions (E₀ = 0.97 V vs. RHE, E_{1/2 …}

P-Doped Ru-Pt Alloy Catalyst Toward High Performance Alkaline Hydrogen Evolution Reaction, Rong-Qin Huang, Wei-Ping Liao, Meng-Xuan Yan, Shi Liu, Yuan-Ming Li, Xiong-Wu Kang

Journal of Electrochemistry

Electrocatalytic water splitting represents grand promise for hydrogen fuel in modern energy equipment, and the design and fabrication of higher performance catalysts are at the central. Herein, we report the sequential phosphorus (P)-doping into ruthenium (Ru) nanoparticles (Ru-P/C) by thermal annealing of Ru nanoparticles in phosphine (PH₃) atmosphere and deposition of extremely low concentration of platinum (Pt) to obtain P-doped Ru-Pt alloy catalyst supported on carbon nanotubes (CNTs), which is denoted as (Ru-P)#Pt/C. The data by X-ray diffraction spectroscopy and transmission electron microscopy show that the Ru nanoparticles existed in the form of hexagonal close-packed (hcp) phase with …

Deep Euteceic Solvents-Assisted Synthesis Of Novel Network Nanostructures For Accelerating Formic Acid Electrooxidation, Jun-Ming Zhang, Xiao-Jie Zhang, Yao Chen, Ying-Jian Fan, You-Jun Fan, Jian-Feng Jia

Journal of Electrochemistry

Deep eutectic solvents (DESs) have been reported as a type of solvent for the controllable synthesis of metal nanostructures. Interestingly, flower-like palladium (Pd) nanoparticles composed of staggered nanosheets and nanospheres are spontaneously transformed into three-dimensional (3D) network nanostructures in choline chloride-urea DESs using ascorbic acid as a reducing agent. Systematic studies have been carried out to explore the formation mechanism, in which DESs itself acts as a solvent and soft template for the formation of 3D flower-like network nanostructures (FNNs). The amounts of hexadecyl trimethyl ammonium bromide and sodium hydroxide also play a crucial role in the anisotropic growth and …

Cardiorespiratory Monitoring Data To Predict Respiratory Outcomes In Extremely Preterm Infants, Namasivayam Ambalavanan, Debra E. Weese-Mayer, Anna Maria Hibbs, Nelson Claure, Premananda Indic, Additional Authors, Prematurity-Related Ventilatory Control (Pre-Vent) Investigators

Electrical Engineering Faculty Publications and Presentations

Rationale: Immature control of breathing is associated with apnea, periodic breathing, intermittent hypoxemia, and bradycardia in extremely preterm infants. However, it is not clear if such events independently predict worse respiratory outcome. Objectives: To determine if analysis of cardiorespiratory monitoring data can predict unfavorable respiratory outcomes at 40 weeks postmenstrual age (PMA) and other outcomes, such as bronchopulmonary dysplasia at 36 weeks PMA. Methods: The Prematurity-related Ventilatory Control (PreVent) study was an observational multicenter prospective cohort study including infants born at 29 weeks of gestation with continuous cardiorespiratory monitoring. The primary outcome was either "favorable" (alive and previously discharged or …

Probabilistic Assessment Of Power Systems Resilience Under Natural Disasters, Enas M. Hegazy, Abdelfattah A. Eladl, Magdi M. El-Saadawi

Mansoura Engineering Journal

Extreme weather can have a substantial influence on a power system's operational resilience since they are high-impact, low-probability (HILP) events. Therefore, Power systems must be resilient to HILP incidents in addition to being reliable against widely spread and credible threats. Despite the rarity of such events, the severity of their potential impact necessitates the development of appropriate resilience assessment tools to capture their implications and enhance the resilience of energy infrastructure systems. In this paper, a probabilistic strategy is proposed to assess and evaluate the operational resilience of power distribution networks against the impacts of HILP events depending on value-at-risk …