Engineering Commons^™

The Use Of Electrical Resistance Strain Elements In Three-Dimensional Stress Analysis, Robert I. Brasier

Electrical and Computer Engineering ETDs

The purpose of this thesis is to present a new method of experimental stress analysis and to give the solution to a problem which has been handled by this method.

Determination Of Q Factors And Operating Characteristics For Microwave Cavities And Oscillations, W.P. Stearns

Electrical and Computer Engineering ETDs

This paper has as its objective the presentation of the theory involved and method used with respect to the resonant cavity parameters; loaded Q, unloaded Q, external Q, pulling figure, and circuit efficiency for the resonant cavity investigated. Experimental data on a particular cavity are discussed and the previously mentioned cavity parameters determined with the use of such data and the particular method presented. A Rieke diagram for the particular cavity investigated is also presented and discussed.

Transients And Saturation In Synchronous Machines, Sabi J. Asseo

Masters Theses

"The synchronous machine can be regarded as the most important electrical device in today's industry and civilization. Although many improvements in the development of powerful electronic devices have been made, in recent years, the importance of the electrical power engineering field can never be overlooked in any way.

Most of electrical power engineering problems have been studied in the first quarter of the present century, and the results applied to industry for the betterment of electrical power production. As distribution and transmission systems used become extensively large, new problems such as the stability of interconnected power systems, have been introduced. …

The Status Of Applied Electricity In Selected Colleges And Secondary Schools In Kansas, Karl E. Cunningham

Electronic Theses & Dissertations

This study was developed on the premise that applied electricity was a current and future need of such dimensions that it demanded more attention by educators. An attempt was made to determine the present status of teaching applied electricity in selected colleges and secondary schools in Kansas with a view to developing and/or improving programs in the area. Objective data were obtained by surveys of secondary school administrators, industrial arts supervisors, and instructors who taught applied electricity as a separate course or as a unit in a composite general shop. Additional information and statistics were derived from books, periodicals, published …

An Investigation Of The Response Of A Velocity Sensing Resonant Oscillator In An Inertially Operated Distance Meter, Howard F. Devaney

Electrical and Computer Engineering ETDs

It was the purpose of this study to investigate the response characteristics of a resonant mechanical oscillator utilized as a governor in conjunction with an inertial distance meter to sense velocity of a carrier. In order to initiate any desired event at a predetermined velocity of a vehicle (for example: fuel cut-off in a conventional liquid fuel rocket motor) it is often desirable to utilize a component requiring no external power for its operation. Such a component would be activated by inertial force and, by some means, integrate the force (or acceleration) with one respect to time and provide a …

The Rating Of A Power Type Transistor, Richard Lee Mann

Electrical and Computer Engineering ETDs

The purpose of this paper is to describe the test performed and present the results obtained in an attempt to establish the maximum permissible direct current and pulse ratings for the type of CTP-1003 (Clevite Transistor Products) power transistors under typical operating conditions. The manufacturer's specifications for the type of CTP-1003 power transistor are located in Appendix A.

The Dc Design Of Reliable Multistable Circuits, Richard H. Williams

Electrical and Computer Engineering ETDs

The reliability of a piece of equipment is a measure of its ability to function as intended. Equipment may malfunction in two different ways. It may fail catastrophically as a vacuum tube does when its heater opens; it may fail gradually as a vacuum tube does when its transconductance slowly falls to an unacceptable level over a period of time. It is not the intent of this paper to study catastrophic component failures, but rather to illustrate a technique whereby gradual failure of circuits can be minimized.

A Binary-To-Decimal Converter, Samuel D. Stearns

Electrical and Computer Engineering ETDs

This paper describes a device which electronically converts a binary number into its decimal equivalent. Such a device might be of use in digital computers, many of which use the binary number system, and also in similar machines, such as pulse code modulated data collectors.

The binary-to-decimal converter described here was designed specifically for use in Sandia Corporation's High-Speed Digital Recording and Data Handling System, which actually uses the Gray code rather than the binary number system. However, conversion from Gray to binary (see Appendix B) is simple, and a binary-to-decimal converter seems much simpler than a Gray-to-decimal converter.

Temperature Stabilized Transistor Direct Current Amplifier, William Lewis Metcalf Jr.

Masters Theses

"A stable direct current transistor amplifier is difficult to design for use at elevated temperatures. The above is true since transistor parameters and bias conditions are affected by temperature. When transistors are incorporated in direct coupled amplifier circuits, these variations in parameters and bias conditions usually result in unstable operation. It is the purpose of this thesis to investigate this problem and to design a stable direct current transistor amplifier which will operate satisfactorily at elevated temperatures.

This problem is of importance as such direct current amplifier circuits are found in airborne or missile servo systems. In such systems the …

Servomechanism Compensation With An Active Phase-Lead Network, Robert T. Dewoody

Masters Theses

"The problem is to develop a phase-lead compensation network for a servomechanism which will not reduce the low-frequency gain and thus decrease the velocity-lag error. The principal part of this thesis deals with the design of such an active phase-lead network. The active network does not have d-c coupling; this eliminates drift problems.

To illustrate an active phase-lead network a simple second order servomechanism is used as a basis for comparing three methods of compensation.

The first method is compensation with a conventional phase-lead network with a gain decrease. The second method is compensation with a conventional phase-lead network with …

Transistors Applied To An Fm-Fm Airborne Radio Telemetery System, R. H. Gablehouse

Electrical and Computer Engineering ETDs

The two semiconductor elements commonly used in transistor production, silicon and germanium, were discovered by two European chemists. A Swedish chemist, Jons Jakob Berzelius, separated and identified silicon in 1823. Germanium was discovered and named by a German chemist, Clemens Alexander Winkler in 1886.

A Technique For Obtaining Submicrosecond Exposure Times At Large Aperture In High-Speed Photography, Joseph A. Hull

Electrical and Computer Engineering ETDs

The purpose of the investigation described in this report was to attempt to improve one of the existing techniques, namely, the Kerr cell type electrooptical shutter, to make it more applicable to the study of high-explosive physics. To provide a background for the reader, a brief discussion of the other techniques will be described. Some of the advantages and limitations of these systems will be discussed.

Determination Of The Residual Vswr [Voltage Standing Wave Ratio] Of A Slotted Line., Michael C. Robel

Electrical and Computer Engineering ETDs

Idealistically, a slotted line should be designed so that, when it is terminated in its characteristic impedance, the VSWR as determined by a movable probe in the slotted line will be 1.0. However, in practice this is not possible, particularly in the case of coaxial slotted lines where matching elements, adapters and connectors are utilized. The devices mentioned above have physical discontinuities which give rise to reflections, which cause a standing wave to be produced even though the line is terminated I its characteristic impedance.

High Stability Lc Oscillator For Use With A Capacitive Pressure Sensing Element, Arthur J. Eldridge

Electrical and Computer Engineering ETDs

In the course of work at the Sandia Corporation, a definite need arose for the measurement of barometric pressures to an accuracy beyond that attainable with commercially available equipment. The standard instrument for measuring these pressures is the mercurial barometer. While a visual method of reading the instrument produced good results to within a 0.1 millimeter of mercury, it was dependent upon the operator using as a reference a target of sighting on the top of the meniscus formed in the barometer tube by the mercury.

Corona Threshold Of Single And Multiple Conductor Lines, David S. Carrick

Electrical and Computer Engineering ETDs

Corona is a self sustaining, often luminous discharge due to ionization adjacent to charged conductors, characterized by the electrodes having a small radius of curvature compared with the interelectrode gap. The display on a power transmission line is accompanied by a current between the conductors which to an engineer mean a power loss that should be minimized if unavoidable.

The Effect Of Today's Residential Electric Consumer On The Planning, Design, And Operation Of Electrical Distribution Systems, James Wilbur Stephens

Professional Degree Theses

"The purpose of this paper shall be primarily to show the present day trends in the use of electricity by the residential consumer and the effect of such trends on the design, planning, and operation of the electric distribution system. System planning related to the electric utility is divided into two classes. The first deals with generation. The second deals with distribution from the various load and transmission centers to the customer. This thesis will deal .primarily with studies related to the latter.

Many utility distribution system problems have been brought about by the rapidly increased demands for residential uses …

Investigation Of The Current Distribution On An Antenna In A Waveguide, David J. Freeman

Masters Theses

"In a communication system composed of several networks and transmission systems, it is necessary for all parts of the system to be impedance matched so that medium energy transfer is possible.

One of the recent transmission systems which has been developed is the wave guide. With the advent of the wave guide the communication engineer is immediately faced with the problem of coupling existing systems and networks to his newly found mode of transmission.

Practically this coupling problem reduces to one of feeding radio frequency energy to the wave guide with some conventional transmission line such as a coaxial line. …

A Proposal For Two Computers Dealing With The Convolution Integral, Charles S. Williams Jr.

Electrical and Computer Engineering ETDs

The integral f(x) = g(x-y)h(Y)dy is known as a convolution integral. The first computer described herein will determine the function f when the functions g and h are known. The second computer will determine the function h when f and g are known; in using the second computer to find h, then the first computer is used for auxiliary computations.

A Study Of Servomechanism Damping Methods, Arthur J. Clark Jr.

Electrical and Computer Engineering ETDs

The purpose of this study is first to present a review of the general effects of damping, both Coulomb and Viscous, and feedback devices resulting in error rate damping: second to present detailed mathematical analyses of a number of special damping devices that may be used to advantage in servomechanism design.

Crossover Networks For Loudspeakers, Edward A. Brown

Electrical and Computer Engineering ETDs

No abstract provided.

A Variational Approach To The Calculation Of Electron Trajectories, Edmund G. Franzak

Electrical and Computer Engineering ETDs

It is the object of the present work to derive, develop, and illustrate a method for the calculation of electron trajectories based on variational techniques and employing scalar and vector potential functions instead of the customary intensity functions. The methods of the calculus of variations furnish an extremely basic approach to the problem while lending an undeniable air of rigor and mathematical elegance.

Solution of the problem will be accomplished by first setting forth a mathematical structure upon which the work will be based, next outlining the physical principles governing the problem and finally applying the mathematical theory and physical …

Design Of A Subsonic Wind Tunnel Electrical System, William A. Wundrack

Professional Degree Theses

"The purpose of this thesis is to present information and data used in the planning and construction of an electrical distribution system and main drive system for a wind tunnel designed for Chance Vought Aircraft Company of Dallas, Texas, by Sverdrup & Parcel, Incorporated, Consulting Engineers of St. Louis. Preliminary negotiations were started with Chance Vought Aircraft Company in March 1953, and the wind tunnel calibrations were started in October 1954. Between those dates all design, installation drawings, and construction were completed.

The data used in preparing this thesis were taken from daily records, records of conferences, personal records, correspondence …

Mechanical Vibration Of Vacuum Tubes, Jerry Dale Swearingen

Masters Theses

"Since the beginning of the art of vacuum tube building, vacuum tube engineers have been faced with many mechanical problems as well as electrical problems.

Early mechanical problems were comparatively small because most of the tubes were used in stationary apparatus where little or no vibration was envolved.

As time went on, vacuum tubes were placed in portable equipment and this useage established the need for a tube that was mechanically strong enough to give reliable electrical behavior where the tube was subjected to considerable vibration….

Recently it has been shown that vacuum tubes operating in the instrument cabins of …

An Analysis Of A Shunt-Peaked Video Amplifier And Feedback Pair Having The Same Edge Response, Bernard J. Regenauer

Electrical and Computer Engineering ETDs

Statement of the problem. It is the purpose of this study (1) to investigate the feasibility of employing a feedback pair instead of a shunt-peaked video amplifier in a typical circuit application; (2) to determine the steady-state gain ratio between a feedback pair and a single shunt-peaked video amplifier having the same edge response (rise time and overshoot) and to analyze the effect of varying either the rise time or overshoot of both circuits upon this ratio; (3) to make a limited study of the steady state gain ratio of a feedback pair and a cascade of two shunt-peaked video …

The Transient Response Of A Distributed Amplifier, Thomas D. Lusk

Electrical and Computer Engineering ETDs

The purpose of this paper is to describe the transient behavior of a simple constant-K distributed amplifier stage. The derivation of the transfer function is carried out using the Laplace Transform for the case where losses in the lines are considered to be zero. The various characteristics of the amplifier response to a unit step function are discussed and the effects of losses and other modifying factors upon the idealized response are evaluated. Finally design procedures are derived which allow the circuit designer to determine the circuit parameters necessary for good transient responses. These procedures are applied to the design …

An Experimental And Theoretical Investigation Of The Characteristics Of A Magnetic Amplifier, Merle H. Wittmeyer

Electrical and Computer Engineering ETDs

Many excellent analyses of magnetic amplifiers have been published. As in every investigation, however, there are many details not explained. The purpose of this investigation was to explain some of the details of magnetic amplifier characteristics.

Servo-Stabilization Of Drift In Wide-Band D-C Amplifiers., Joel M. Simmons Jr.

Electrical and Computer Engineering ETDs

It was the purpose of this study to determine the suitability of a comparator and negative feedback circuit (servo-type) as a general utility method of reducing the end effect (zero-drift) of changing static characteristics of the vacuum tubes and other associated components in wide-band direct-coupled amplifiers. A brief description of the drift servo-stabilization system and its drift reducing characteristics are as follows.

The Design And Construction Of An Electronic D-C Analog Computer, Frederick R. Wagner, William A. Paar

Masters Theses

"To make this project realizable with the funds available and in the time allowed, and to set forth some definite goals, the following objectives were adopted:

1. Design, construct, and place in working order a d-c electronic analog computer capable of solving 4th order linear differential equations with constant coefficients.
2. Include in the design provisions for real time computation, and also fast, repetitive operation.
3. Provide for later expansion of the computer installation.
4. Limit expenditures to $700"--Introduction, page 4.

An Analysis Of A Cathode-Coupled Multivibrator, Fred T. Sinnott

Electrical and Computer Engineering ETDs

The purpose of this study is to develop an analysis for monostable cathode-coupled multivibrators and verify the analysis by experimental results.

An Analysis Of The Monostable Cathode-Coupled Multivibrator, Joseph C. Connell

Electrical and Computer Engineering ETDs

II. PURPOSE OF THESIS

The foregoing comments pointed out the facts that: 1) little has been done to show the similarity between the multivibrator and the RC amplifier with degenerative feedback; 2) the existing treatment of the conditions under which a linear relationship between pulse duration and applied grid voltage will exist does not give results which are in very good agreement with the values used in a practical circuit.

It is the purpose of this study to fill in these gaps by showing that the equations resulting from an analysis of the cathode-coupled multivibrator are, in general, those of …