Engineering Commons^™

Nr Sidelink Performance Evaluation For Enhanced 5g-V2x Services, Mehnaz Tabassum, Felipe Henrique Bastos, Aurenice M. Oliveira, Aldebaro Klautau

Michigan Tech Publications

The Third Generation Partnership Project (3GPP) has specified Cellular Vehicle-to-Everything (C-V2X) radio access technology in Releases 15–17, with an emphasis on facilitating direct communication between vehicles through the interface, sidelink PC5. This interface provides end-to-end network slicing functionality together with a stable cloud-native core network. The performance of direct vehicle-to-vehicle (V2V) communications has been improved by using the sidelink interface, which allows for a network infrastructure bypass. Sidelink transmissions make use of orthogonal resources that are either centrally allocated (Mode 1, Release 14) or chosen by the vehicles themselves (Mode 2, Release 14). With growing interest in connected and autonomous …

The Effects Of Engineering Summer Camps On Middle And High School Students’ Engineering Interest And Identity Formation: A Multi-Methods Study, Timothy Robinson, Adam Kirn, Jenny Amos, Indira Chatterjee

Journal of Pre-College Engineering Education Research (J-PEER)

This multi-methods study explores changes in engineering interest and identity of middle and high school students (n = 79) attending introductory-level engineering summer camps at a large western land grant university. Middle school is a critical time when student interest, identity, and subsequently career choice begin to emerge and hence it is important that at this age students are given accurate information about engineering majors in college and future career opportunities in engineering. Data were collected over a period of two years in six summer camps. Three separate populations of middle and high school students participated in the summer …

Iprec And Isoblaze: Fuzzy Subcircuit Isomorphism For Ip Detection In Physical Netlists, Dallin Dahl, Corey Simpson, Keenan Faulkner, Brent Nelson, Jeffrey Goeders

Student Works

Netlist reverse engineering has many uses, from detecting hardware trojans to recovering missing design source files. However, the basic problem of finding IP in a netlist has not been widely discussed. The problem boils down to subgraph isomorphism on graphs constructed from netlists. We present two approaches to identifying IP in larger circuits. IPRec focuses on exploiting hierarchy in the IP design and is a rather conservative approach, while Isoblaze focuses on local properties and connectivity and is more liberal in matching.

Resonance Damping Of Lcl Filters Using Capacitor-Current Proportional-Integral Positive Feedback Method For Grid-Integrated Fuel Cell System, Majid Hosseinpour, Amin Kholousi

Emirates Journal for Engineering Research

Nowadays, the use of grid-integrated inverter proton exchange membrane fuel cell (PEMFC) systems is becoming more prevalent due to their efficiency and favorable environmental effects. Switching the grid-connected inverters causes high-frequency harmonics, which are eliminated using LCL filters. These filters are susceptible to instability when their resonant frequency is affected by changes in network impedance. Active damping methods are used to weaken the resonance of LCL filters. However, the grid-connected inverter is prone to be unstable under grid impedance variations due to the negative equivalent resistance resulting by digital control delays. As a solution to this problem, the capacitor-current proportional-integral …

Modeling And Analysis Of The Selective Lightning Strike Phenomenon At Locations In A Chemical Manufacturing Plant, Terver Maor

Doctoral Dissertations

This research was motivated by the overly simplified claims, from a previous study, that attempted to explain the cause of the reportedly repeated lightning strikes at certain locations in the chemical manufacturing plant. The findings, without any model, claimed that the electronic monitoring and control devices’ fire damage occurred, due to the raised electrical ground potential during lightning strikes. It proceeded that the raised electrical ground potential caused a power flow reversal, which exceeded the ratings of the affected electronic control modules, damaging them. This claim is inconsistent with published research work in the failure mechanisms of industrial control systems, …

Analysis Of Sectoral Energy Demand In Pakistan, Raza Ali Khan, Mirza Faizan Ahmed, Jaweriya Naz

CBER Conference

The purpose of this research is to estimate the energy demand for different sectors including commercial, industrial, residential, transportation and agriculture. For this purpose, different factors affecting the demand for energy in each sector have been analyzed. The adopted methodology is Box Jenkins, which is a systematic approach of identification, estimation, diagnostic checks and forecasting of the model.

Food-Water-Energy Nexus In The Perspective Of Green Revolution, Green Energy, Legal And Institutional Framework: A Killian Based Adjusted Bootstrap Approach, Zia Ur Rahman

CBER Conference

Food and water energy is crucial for human well-being, sustainable development, and poverty reduction. The growing global demand driven by population growth, economic development, urbanization, changing diets, technological advancements, and climate change projections indicates a significant increase in the need for these resources. Understanding the intricate interdependencies between food, water, and energy is essential for effectively addressing these challenges and fostering a prosperous and sustainable future. Therefore, this study incorporated statistical data collected from the Pakistan Economic Survey and the World Governance Indicator from 1990 to 2022 to elucidate the complex connection between food, water, and energy.

Does Green Energy Really Matter For Environment And Economic Sustainability? Validating The Long-Standing Existing Empirics On Pakistan Economy, Syed Kafait Hussain Naqvi

CBER Conference

The empirical outcomes of the study validate the widespread concern of the literature on the existence of the “growth hypothesis” which supports, that there is a systematic positive causation running from green energy to economic sustainability. The study findings suggest that regulations in the energy sector can encourage the applications of green energy resources, particularly in the real sector of the economy, leading to reduced emissions.

Demand Analysis Of Energy Mix In District Kotli Azad Jammu And Kashmir, Pakistan, Syed Kafait Hussain Naqvi

CBER Conference

This study is an effort to empirically analyze the household’s demand for energy mix (electricity, liquefied petroleum gas (LPG), kerosene, and firewood) in the District Kotli, AJK. The study estimates the demand elasticities (price and expenditure) by employing the Linear Approximate Almost Ideal Demand System (LA-AIDS) to 384 households sampled across District Kotli, AJK in 2017. The empirical estimations are carried out by using the Seemingly Unrelated Regression (SUR), keeping intact the adding-up, homogeneity and symmetry restrictions.

Improving Cellphone-Based Bio-Imaging Technique For Fluorescence Detection, Erteza T. Efaz

LSU Master's Theses

The research presented in this thesis focuses on the design, development, and evaluation of a fluorescence detection system. The system is implemented primarily as an Android application, Auto Camera, which leverages smartphone cameras to capture and analyze fluorescent images. The application provides a user-friendly interface with some configurable features like exposure time, ISO speed, and storage limit; as well as defining detection thresholds and setting acquisition intervals. This study begins with the architectural framework of the Android application, which is written in Java using Android Studio. The API compatibility is set to version 33, and users are prompted to grant …

Multi-Model Digital Twins With Ai Forecasting For Seed To Stand Supply Chain, Rania Sherif Elashmawy

USF Tampa Graduate Theses and Dissertations

The present dissertation embodies a multi-faceted investigation aimed at enhancing strawberry production pre-harvest and post-harvest quality through data-driven approaches. It unfolds multi-stages framework.

The first stage presents a complete data collection and its preliminary statistical analysis obtained from the first phase of a large-scale soil study on how to improve strawberry production and achieve sustainable and high-quality harvests through sensor-assisted real-time field monitoring. Six real-time loggers were placed in an operational commercial strawberry farm in Central Florida for the entirety of a harvest season from soil preparation to planting to harvesting. Along with high-resolution soil sensory measurements including water content, …

A Moving Target Architecture As A Side-Channel Countermeasure, Rachel M. Cazzola

Electrical and Computer Engineering ETDs

We investigate a novel side-channel attack countermeasure called Side-channel Power analysis Resistance for Encryption Algorithms using Dynamic partial reconfiguration (SPREAD). The countermeasure leverages a strategy that is best characterized as a moving target architecture. Modern field-programmable gate array (FPGA) architectures provide support for dynamic partial reconfiguration (DPR), a feature that allows real-time reconfiguration of portions of the programmable logic (PL) while the FPGA continues to carry out computing tasks. Using the Advanced Encryption Standard (AES), the proposed moving target architecture leverages DPR to change the implementation characteristics of the substitution boxes (SBOX) in real time. We present experimental hardware results …

Poster: Optimising Electric Vehicle Charging Infrastructure In Dublin Using Geecharge, Alexander Mutiso Mutua, Ruairí De Fréin, Ali Malik, Kibanza Eliel, Sahbane Marco, Pantel Maxime

Conference papers

Range anxiety is a significant challenge affecting electric vehicles use as drivers fear running out of charge without finding a charging point on time. We develop methods to optimise the distribution of charging points. EV portacharge and GEECharge solutions distribute charging points in a city by considering the population density and Points Of Interest (POI) or road traffic. This paper focuses on (1) developing and evaluating methods to distribute Charging Points (CPs) in Dublin city; (2) optimising CP allocation; (3) visualising paths in the graph network to show the most used roads and points of interest; (4) describing a way …

Study Of Si-Gan Photoconductive Switches Operating Modes Using Near-Ir Radiation, Nicolas Eduardo Gonzalez Padilla

Electrical and Computer Engineering ETDs

One of the most promising solid-state devices for fast switching and radio frequency generation applications is the photoconductive switch (PCSS). These devices have been thoroughly explored since the late 1980s and exhibit remarkable switching properties in gallium arsenide (GaAs). With recent advances in wide bandgap (WBG) semiconductor manufacturing processes, there has been an increasing interest in using WBG semiconductors to implement PCSS. WBG semiconductors could exhibit the same switching characteristics as GaAs while overcoming their poor power management and short lifetime under pulsed power conditions, making PCSS a reliable option in high-power applications. Gallium Nitride (GaN) has emerged as one …

Carrier Dynamics In Green Iii-Nitride Leds Using Small-Signal Electroluminescence, Xuefeng Li

Optical Science and Engineering ETDs

Solid-state lighting has achieved significant success over the past two decades, but the low quantum efficiency of green LEDs (i.e., the “green gap”) remains a barrier to full red-green-blue (RGB) displays in numerous applications. Combating efficiency reduction in longer-wavelength LEDs requires understanding the relative roles of intrinsic effects (e.g., wave-function overlap, carrier-current density relationship, phase-space filling (PSF)) vs. extrinsic effects (e.g., material degradation due to increased defect density, compositional inhomogeneities, etc.). A systematic study of the carrier dynamics in InGaN/GaN LEDs is very important for understanding the origin of the green gap and for providing solutions to improve the efficiency …

Design, Optimization, And Hardware Deployment Of A Deep Learning Model For Gps Spoofing Detection Using Gnss Satellite Receiver Protocol Data, Clarizza Morales Chacon

Electrical and Computer Engineering ETDs

The contemporary GPS infrastructure plays a vital role in advancing Position, Navigation, and Timing (PNT) applications across various sectors, including transportation, commerce, finance, and aviation. To provide a robust and authenticated infrastructure for users, it is important to develop a methodology for verifying the authenticity of satellite navigation signals, especially in civilian applications using the C/A code. This thesis explores Machine Learning (ML) techniques, focusing on the analysis of Global Navigation Satellite System (GNSS) protocol messages like UBX and NMEA to detect anomalies in receiver and satellite behavior, indicative of potential spoofing. The research demonstrates the deployment of Machine Learning …

Optimal Management Of Renewable Energy Resources To Increase Resilience Of Power Systems, Tohid Khalili

Electrical and Computer Engineering ETDs

The main goal of this dissertation is to improve the resilience of power systems using different techniques and optimization approaches regarding new technologies. Thus, several test cases with various objective functions are proposed. Voltage regulation and demand response programs are used to investigate and improve the system's financial and reliability status. In addition, COVID-19’s effect with the high presence of renewable energy resources is examined from financial, risk, and reliability points of view. Finally, a new model for the wildfire risk is proposed in a large distribution system to increase the reliability of the system with the usage of reclosers …

The Automated Wheelchair, Jonathan Doksa Kamba Ngoyi

Honors College Theses

Automation refers to the use of technology to execute tasks through programmed instructions and automated control mechanisms to ensure accurate execution. This minimizes human involvement and encompasses various fields, including business process automation. A notable form of automation is assistive technology, which refers to any device or software that enhances individuals' learning, communication, or overall functionality. This can range from advanced tools like computers to simpler aids like walking sticks. Assistive technology aims to promote inclusivity and participation, particularly among individuals with disabilities, the elderly, and those with non-communicable diseases.

The Automated Airport Wheelchair is a culmination of prior projects …

Inverse Engineering Of Absorption And Scattering In Nanoparticles: A Machine Learning Approach, Alex Vallone, Nooshin M. Estakhri, Nasim Mohammadi Estrakhri

Engineering Faculty Articles and Research

We use a region-specified machine learning approach to inverse design highly absorptive multilayer plasmonic nanoparticles. We demonstrate the design of particles with a wide range of absorption to scattering ratios (i.e., cloaked absorbers and bright absorbers) and for different visible wavelengths.

Survey On Wi-Fi And Cellular Communication Technology For Advanced Metering Infrastructure (Ami) In A Developing Economy, Tejumade F. Anthony, Folasade M. Dahunsi

The African Journal of Information Systems

Traditional energy meters have suffered from a lack of automated analysis and inaccuracy in reading energy consumption, which has brought about smart metering systems. Developing economies such as in Africa. still experience a setback in electricity monitoring and load distribution because of existing traditional meter systems in use. Communication technologies play an important role to improve the monitoring of energy consumption and ensure a road map toward a smart grid. This paper reviews communication technologies used for Advanced Metering Infrastructure (AMI) emphasizing Wi-Fi and Cellular technologies. Metrics used to evaluate their performance include cost, energy efficiency, coverage, deployment, latency, payload, …

Machine Learning Enabled Cluster Grouping Of Varistors In Parallel-Structured Dc Circuit Breakers, Shuyan Zhao, Yao Wang, Reza Kheirollahi, Zilon Zheng, Fei Lu, Hua Zhang

Henry M. Rowan College of Engineering Departmental Research

This letter presents the first ever trial of machine learning enabled cluster grouping of varistors for DC circuit breakers (DCCBs). It reveals that the manufacturing discrepancy of varistors is a main challenge in their parallel connection. The proposed cluster grouping concept is introduced to classify varistors according to the interruption characteristic, in which the K-means algorithm is adopted to learn the clamping voltage curves. 70 420 V/50 A V420LA20 varistors are measured in a 120 A transient current interruption platform individually to acquire 70 sets of testing data to train the machine learning engine. Then, 28 new varistors are further …

Modeling Hydration Kinetics Of Sustainable Cementitious Binders Using An Advanced Nucleation And Growth Approach, Taihao Han, Jie Huang, Gaurav Sant, Narayanan Neithalath, Ashutosh Goel, Aditya Kumar

Electrical and Computer Engineering Faculty Research & Creative Works

Supplementary cementitious materials (SCMs) are utilized to partially substitute Portland cement (PC) in binders, reducing carbon-footprint and maintaining excellent performance. Nonetheless, predicting the hydration kinetics of [PC + SCM] binders is challenging for current analytical models due to the extensive diversity of chemical compositions and molecular structures present in both SCMs and PC. This study develops an advanced phase boundary nucleation and growth (pBNG) model to yield a priori predictions of hydration kinetics—i.e., time-resolved exothermic heat release profiles—of [PC + SCM] binders. The advanced pBNG model integrates artificial intelligence as an add-on, enabling it to accurately simulate hydration kinetics for …

Room Temperature Two-Dimensional Electron Gas Scattering Time, Effective Mass, And Mobility Parameters In AlXGa1−XN/Gan Heterostructures (0.07 ≤ X ≤ 0.42), Sean Knight, Steffen Richter, Alexis Papamichail, Philipp Kühne, Nerijus Armakavicius, Shiqi Guo, Axel R. Persson, Vallery Stanishev, Viktor Rindert, Per O. Å. Persson, Plamen P. Paskov, Mathias Schubert, Vanya Darakchieva

Department of Electrical and Computer Engineering: Faculty Publications

Al_xGa_1-xN/GaN high-electron-mobility transistor (HEMT) structures are key components in electronic devices operating at gigahertz or higher frequencies. In order to optimize such HEMT structures, understanding their electronic response at high frequencies and room temperature is required. Here, we present a study of the room temperature free charge carrier properties of the two-dimensional electron gas (2DEG) in HEMT structures with varying Al content in the Al_xGa_1-xN barrier layers between x = 0:07 and x = 0:42. We discuss and compare 2DEG sheet density, mobility, effective mass, sheet resistance, and scattering times, …

Characterization Analysis And Design Of Mid-Wave Infrared Iii- V-Based Type-Ii Superlattice Nbn Photodetectors For Space Applications, Alexander Timothy Newell

Electrical and Computer Engineering ETDs

The performance of the mid-wave infrared InGaAs/InAsSb nBn photodetector is investigated and its viability for space applications is assessed. Three structures are grown with unique absorber layer doping profiles via molecular beam epitaxy. Material and device characterizations are performed and analyzed to determine the effects of doping on fundamental material parameters and detector performance. Noise-equivalent irradiance is calculated to be a factor of 4x that of an ideal detector exhibiting Rule 07 dark current and 100% quantum efficiency, demonstrating high sensitivity. The structures are then irradiated with 63 MeV protons to evaluate the extent of performance degradation over the course …

Comparative Evaluation Of Investigation Methods For Estimating The Load-Dependent State Of Charge And End Of Discharge Of A Multirotor Uav Battery, Hanna Dibbern, Morten Roßberg, Claudia Werner

Journal of Aviation Technology and Engineering

As the scope of multirotor unmanned aerial vehicle (UAV) applications increases, more attention is being paid to UAV energy requirements, which vary depending on the mission profile. To obtain accurate information about the UAV battery during flight, the idea of a digital twin including a battery state estimation model is promising. For battery state estimation, a Kalman filter combination is the preferred approach in the literature. Comparing different Kalman filters, the unscented Kalman filter has a more accurate estimation for nonlinear systems compared to the extended Kalman filter. In the application of UAV flight with load-dependent flight missions, the comparison …

Stereoscopic-Based Mass Properties Estimation For Warhead Fragments, Alessia Nocerino, Katharine Larsen, Riccardo Bevilacqua, Elisabetta L. Jerome

Student Works

FRAGMENTATION characteristics such as spatial distribution, number of fragments, fragment velocity, and fragment mass can be used to characterize the lethality of a fragmenting weapon or any metal cased explosive [1,2]. However, most warhead tests and evaluations are limited to static arena testing, where fragment characteristics must be collected by hand. Recently, stereoscopic imaging techniques have been added to static arena tests. Using this method, position tracks can be collected for each fragment, and then velocity information can be found. This paper proposes a method to estimate the mass and moment of inertia using data collected by a stereoscopic imaging …

Study On Debinding And Sintering Conditions In Extrusion-Based Additive Manufacturing Of 316l And 316l + Cu, Jean-François Silvain, Daniel Lincoln Gifford, Sébastien Fourcade, Laurent Cuzacq, Jean-Luc Grosseau-Poussard, Catherine Debiemme-Chouvy, Nicolas Tessier Doyen, Yongfeng Lu

Department of Electrical and Computer Engineering: Faculty Publications

This study investigates the use of a methylcellulose binder in extrusion additive manufacturing of 316L as an alternative to common wax-based binders. Various quantities of copper (Cu) powder were also added in the paste composition to attempt to reduce the sintering temperature by promoting persistent liquid phase sintering. Debinding experiments were conducted under different temperatures and dwell times using argon (Ar), Ar/5%H₂, and Ar/1%O₂ atmospheres. Debinding reduced carbon (C) content to 0.032 wt.% by using a two-step debinding process of Ar/5%H₂ and Ar/1%O₂ thermal treatments. Using this debinding process, sintering was conducted at 1200 ^{o …}

Ambient Air Emission Profiles Of Polycyclic Aromatic Hydrocarbons Around A Typical University Power House In Nigeria, Oyetunji Okedere

Tanzania Journal of Engineering and Technology (TJET)

The level of electricity generation in Nigeria is presently grossly inadequate. Consequently, the productive sectors of the economy do not presently enjoy an uninterrupted supply of electrical energy from the country’s national grid and the downtime is in most cases too much. Using diesel-fueled electric power generators has become an attractive alternative to meet the shortfall in the energy supply gap. In this study, the levels of polycyclic aromatic hydrocarbons in the vicinity of the diesel-fueled electric power generators operated by Osun State University, Osogbo, Nigeria were investigated with a view to ascertain the priority levels and carcinogenic PAHs. Since …

Employment Of Intelligent Predictive Maintenance On Thermal Power Plant Component Parts Taking Condenser Vacuum As A Case Study, Titus Ajewole

Tanzania Journal of Engineering and Technology (TJET)

This work proposes deployment of machine learning in the maintenance of individual constituent parts of steam power plant assemblages. With the condenser vacuum of a steam turbine (in a six-turbine plant assemblage) taken as a case study, information on the past operating parameters of the selected plant component was used to forecast its future working condition. Based on Exponential Gaussian Process of Regression, a model was developed, trained using the diachronic operational data, and employed in determining the future. A quantitative evaluation was employed to provide the distribution of the test values of the data about the lines of regression, …

System-Level Noise Performance Of Coherent Imaging Systems, Derek J. Burrell, Joshua H. Follansbee, Mark F. Spencer, Ronald G. Driggers

Faculty Publications

We provide an in-depth analysis of noise considerations in coherent imaging, accounting for speckle and scintillation in addition to “conventional” image noise. Specifically, we formulate closed-form expressions for total effective noise in the presence of speckle only, scintillation only, and speckle combined with scintillation. We find analytically that photon shot noise is uncorrelated with both speckle and weak-to-moderate scintillation, despite their shared dependence on the mean signal. Furthermore, unmitigated speckle and scintillation noise tends to dominate coherent-imaging performance due to a squared mean-signal dependence. Strong coupling occurs between speckle and scintillation when both are present, and we characterize this behavior …